36 modeli
Es können der original Extruder und der Schrittmotor weiter verwendet werden. Die 8mm Hülsen müssen ins Druckteil eingepasst werden und zwischen Hülsen und Rolle habe ich eine M5 U-Scheibe eingesetzt.
This is a model of the MicroSwiss DirectDrive and AllMetalHotend for the Creality Ender 5 printer and was created by manually measuring some parts from my CR10/Ender 3 MicroSwiss DirectDrive, except for the backplate that I uploaded here…
This is an exact model (+- 0.1mm tolerance) of the MicroSwiss DirectDrive and AllMetalHotend for Creality CR10/Ender3 printers and was achieved only by manual measuring. It's available as a step file or as a Fusion360 file (.f3z). I made…
BMG V6/Dragon directdrive mount CR10/Ender3/TevoTornado V2 added Remixed from the most rugged, solid and best performing direct-drive mount, credits for the original design goes to @VykkuF ( https://www.thingiverse.com/thing:3747412 )…
***************** *** ITALIANO *** ***************** Non è più un problema stampare il TPU con la Super Racer! Ho progettato un nuovo case per trasformare l'Effector da Bowden a DirectDrive e, per l'occasione, ho pensato di installare uno…
This is a custom cooling solution for an NF-Crazy Plus hotend on an Ender 5 Pro. The NF-Crazy Plus is a Mosquito clone that is wider than the original Mosquito, but also mounts using the stock Creality mounting solution rather than the…
This is a mod of the Mini satsana hotend for the Ender 3 that allows you to use the original steel bl-touch mount and is optimised to work with certain direct drive systems. The original version might overheat when used with certain…
This is my first attempt at an mounting plate for my cheap filament runout sensor. Since I had upgraded my Ender 3 V2 to a direct drive extruder, the usual filament runout sensor mounts didn't fit. Had to design something to attach it to…
fan and stuff for the Volcano long boy UPDATE 26/08/2022 added Ender 3 V2 support
Disclaimer: These versions of the FanDuct won't receive any updates or adjustments! . FOR IMPROVED PERFORMANCE USE THE NEW V4 INSTEAD: https://www.thingiverse.com/thing:4886226 . . . . . I designed this Fan Duct after upgrading my CR10…
Converting the Ultimaker2 clone to direct extrusion using a lightweight extruder was a long term project of mine. So here it is: Only 250g total, well ballaced on the drive rods and only a small penalty in usable space. The flange for the…
Mount the Filament Runout Sensor to the print head of your anycubic kobra max
Deutsch: Update: Ich habe das Modell noch einmal überarbeitet, damit es jetzt auch eine Version gibt, die das Montieren eines BLTouch (oder ähnlichem) Sensors ermöglicht. Der Teil für den BLTouch benötigt ebenfalls einige Supports (siehe…
Stealthburner DirectDrive Cr-10s Pro V2 only using stock parts. I wanted to convert my Cr-10s Pro V2 to DirectDrive using only the original parts. I also like the look of the Stealthburner, so I modified the Stealtburner to fit the Cr-10s…
This is a FanDuct for the Creality Ender 5 reworked from scratch to fit the stock setup (hotend+backplate) as well as the MicroSwiss DirectDrive and is made for 3x 40mm fans (Noctua NF-A4x20 FLX in my case). . . The new version has a few…
Wenn es noch nichts gescheites fertig gibt muss man es sich eben selber machen ;-) Den Anfang hat " slaik13 " mit seiner Grundplatte gemacht, damit hat er freundlicherweise die einfache Möglichkeit geschaffen mit relativ wenig aufwand…
This is technically not a remix of the original part as I remodeled it from zero, but I strongly followed the design of the original part :) I have the MicroSwiss DirectDrive + AllMetalHotend assembly for V-Rollers and wanted to use it…
This is a new reworked version of my original CR10/Ender3 MicroSwiss DirectDrive Fanduct: https://www.thingiverse.com/thing:4277669 . . . The new versions have a few key differences to my first approach: . . V4.0: (DISCONTINUED) .…
After conversion to the Direct Drive and BL touch a lot of additional loose cables were flying around between the extruder and the former extrusion adapterplate. So here are 2 small brackets to organize the cables properly. One for the…
Remixed the CR10-V2 base Proof-Of-Concept, works basically: Updated the hole positions (original design did not fit my X-Carriage) Integrated Fanguide directly Modified positions to lower hotend (so more compression if you use a v6…
ABS material and 100% fill amount
Triangle Lab TBG-lite DirectDrive mount for Ender 3 This is a remix of b-lud's DD mount modified for the Triangle Lab TBG-Lite extruder. Printed with tree supports in cura, normal supports in other slicers should work fine as well.…
The design consists of two pieces: A mounting bracket for the StealthBurner and BLTouch A "carrier" around the 4240 motor with heat-inset holes for the EBB36
DISCONTINUED: USE THE NEW V3 INSTEAD: https://www.thingiverse.com/thing:4975346 . . . This is a fan duct for an Ender5 using the MicroSwiss DirectDrive and AllMetalHotend to mount 40mm fans for part cooling and cooling the fins on the…
I designed a mount for BigTreeTech ADXL345 sensor to mount on MicroSwiss NG direct drive extruder. Remove two lower screws and replace with longer ones (I used 3x20 mm self-tap screw). To mount ADXL on adapter I used two small M3 screws.…
My printer currently has equipped an NF Crazy Plus, which is different from the regular NF Crazy in that there are screws for mounting it directly to the Ender 3 v2. Unfortunately, many ducts out there don't specify that their duct only…
This a remix from ScaryPug's design which I decided to fix since the original didn't have a hole for an M3 nut
You can change from original data to OrbiterExtruder direct drive. The Extruder fixing part is a separate part for easy printing. The hotend is also V6 compatible so you can use a lot of parts. I use REDLIZERD. Parts required for assembly…
After almost one year of manual (and painful...) bed levelling I've finally got a crtouch for my ender5pro, but I had this printer upgraded to the microswiss direct drive (shortly after buying it), so I needed a mount which could fit my…
UNI 2.3 DirectDrive conversion for Titan extruder (under rail, HBOT, BLK 2.0). https://www.thingiverse.com/thing:4646345 Версия титан директ для боудена Наиля. Для конверсии стокового боудена 2.3. Совместимость: фрезерованная балка нового…
Original files here: https://www.thingiverse.com/thing:4336908 THIS MOD WORKS WITH ORIGINAL FILES FROM 4336908 ENGLISH Same files as original but..... Files: Directdrive-BMG-V6_Mount-Back-for-inductive.stl Back of the mount with holes in…
This is a fan duct for a CR10s Pro using the MicroSwiss DirectDrive and AllMetalHotend to mount two 4010 radial and one 4010 axial fan while keeping the stock position of the stock probe! The model was a request made on my discord server,…
You'll need 9x M3 plastic inserts and M3 screws &cable ties. One more insert is for future upgrades (close to motor). Cable ties should be placed before mounting motor. Mounting radial fan with screws is optional (not necessary when cover…
Just a small block with holes for zip-ties and a bit of an indent for the hot-end/toolhead cable. When you have the original space for the extruder empty because you switched to directdrive, this little mounts gives you a nice spot to…
A small plate with a filament passthrough so you can run a side-feed into a direct drive converted bedslinger 3D printer like Creality's Ender3 and CR10. Very usefull if you want to print straight out of a drybox, use very large spools on…
![[WIP]CRUX1 E3Dv6 (optional Sherpa mini DirectDrive)](https://media.printables.com/media/prints/369454/images/3117437_b055b47a-058a-4468-bf3a-8ee81999f1df/img_20230115_160212.jpg)
