Wyniki wyszukiwania: dispen

Sortowanie

5167 modeli

P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu

Pobrania
8814
Polubienia
4733
Ocena
4,89
P
PrintablesTantalus

Pokemon Booster Pack Dispenser Unit

A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…

Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu

Pobrania
2903
Polubienia
288
Ocena
5
P
Printableschrisebryan

Solder Paste and Flux Dispenser

The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…

Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu

Pobrania
2855
Polubienia
313
Ocena
4,76
P
Printablesromanslezak78

50mm Tape Dispenser Cutter - remix

I was inspired by the 50mm Tape Dispenser Cutter. But it didn't work to my liking I drew it to my liking.

Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu

Pobrania
1971
Polubienia
334
Ocena
4,56
P
PrintablesRESTLESS DESIGN

Battery Dispensers (5 versions)

This design is based on Fukar's design: https://www.thingiverse.com/thing:3245139 My additions/modifications are: Mounting options for both screws and magnets (10x2mm magnets) This design prints in one piece, which increases part strength…

Wydruk około 12,85 €–15,71 € nettoWstępna wycena jednego wariantu

Pobrania
1683
Polubienia
190
Ocena
4,63
P
Printablesslelham

Pop-up sticky note dispenser

couldn't find a good pop up dispenser for sticky notes (the ones that come zigzag) So designed this simple dispenser. At first I left both sides open but since the top part with the opening weren't connected to the bottom it was very…

Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu

Pobrania
1373
Polubienia
179
Ocena
5
P
PrintablesWill

Can Dispenser Adjustable XL no support

Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…

Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1366
Polubienia
622
Ocena
5
P
PrintablesPeter Farell

Nuka Cola Dispensary : Fallout

Nuka Cola Dispensary / Vending Machine. Make it into a piggy bank. Or use it in the dice tower contest. I find this model very satisfying to look at. I think I am a sucker for Nuclear Age style artwork.

Wydruk około 19,01 €–23,23 € nettoWstępna wycena jednego wariantu

Pobrania
1163
Polubienia
347
Ocena
5
P
PrintablesJCPhlux

18650 Battery Dispenser

Battery tray for 18650 batteries. 17 battery capacity Print instructions Key for filenames E.g. {filename}_{s}_m{x}.stl filename = Name of part s = the number of the parts to print not mirrored. x = the number of parts to print mirrored…

Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu

Pobrania
1128
Polubienia
151
Ocena
4,56
P
Printablesx13a

Cat Food Dispenser

Automatic cat Feeder I added a lid after some users asked for it, you can find more lids from other users in the comments as well as in the remixes. Use at your own risk

Wydruk około 27,14 €–33,17 € nettoWstępna wycena jednego wariantu

Pobrania
1077
Polubienia
189
Ocena
5
P
Printablesckassoff

Georgia-Pacific paper towel dispenser key

I couldn't find a “key” that had both parts on it, so I sketched this one up

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
595
Polubienia
33
Ocena
5
P
PrintablesKaliM

Parametric dispenser - dishwasher tablets and more

I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…

Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu

Pobrania
533
Polubienia
199
Ocena
5
P
PrintablesRosti

Can Dispenser UK/EU 10x 330/440ml Drink / Beer

June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…

Wydruk około 3,20 €–3,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
512
Polubienia
409
Ocena
5
P
PrintablesJeroen3

Detergent Powder Dispenser

A rotary dispenser to dispense a consistent amount of detergent. About 17g, as recommended for the detergent I use. It works best when mounted to the wall, inside a kitchen cabinet for example. Print instructions It prints without…

Wydruk około 12,57 €–15,37 € nettoWstępna wycena jednego wariantu

Pobrania
507
Polubienia
110
Ocena
5
P
PrintablesWerner-3D

Shooting-Patch-Dispenser

I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…

Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
438
Polubienia
31
Ocena
5
P
Printablesollien

Canned Cat Food Dispenser

This is a small dispenser I designed to dispense cat food. I designed it around the Hills C/D cans, but I imagine it should accommodate most 3.3" wet food cans. The cans must be stacked in opposing directions in order to be able to pull…

Wydruk około 7,82 €–9,56 € nettoWstępna wycena jednego wariantu

Pobrania
330
Polubienia
76
Ocena
5
P
PrintablesAxelC

Placker dispenser

The challenge I had was that my plackers comes in a plastic bag packaging which is hard to store in my bathroom cabinet and risks falling out whenever I open the cabinet doors. The idea is to create a convenient dispenser thus eliminating…

Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu

Pobrania
327
Polubienia
70
Ocena
4,75

CATAN card dispenser

my own design for catan card dispenser i was tired of all the minimalistic dispensers and i wanted something more classic like the game should come with this in the box thing its very rigid and stable and completes the game in more…

Wydruk około 8,66 €–10,59 € nettoWstępna wycena jednego wariantu

Pobrania
317
Polubienia
69
Ocena
4
P
PrintablesTantalus

Isopropyl Alcohol Swab Dispenser

I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…

Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu

Pobrania
312
Polubienia
63
Ocena
5
P
Printables3DPrintM.D.

Ergonomic SMD Solder Paste Dispenser for 1ml and 3ml Syringe

For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…

Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
267
Polubienia
61
Ocena
4,5
P

Pod Dispenser (Dishwasher Laundry)

A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…

Wydruk około 8,40 €–10,27 € nettoWstępna wycena jednego wariantu

Pobrania
226
Polubienia
61
Ocena
5
P
PrintablesMakafab

Sanitary pads dispenser

I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…

Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu

Pobrania
221
Polubienia
38
Ocena
4,33
P
PrintablesPetr

Updated: Alcohol barell dispenser v2.0

I recomand scale 77% x 77% x 70% 17.3.2022 - Release version 1.0 29.3.2022 - Updated version - bigger pipe and better stop

Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
208
Polubienia
22
Ocena
4,67
P
Printablesbenedikt314159

Bin filler and dispenser for smaller parts, especially for WAGO clamps

Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…

Wydruk około 8,74 €–10,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
147
Polubienia
128
Ocena
0
P
Printablesinfn8

Nespresso Vertuo Capsule Dispenser - Dual large

Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.

Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu

Pobrania
136
Polubienia
49
Ocena
0
P
PrintablesEdgar.A

Magnetic paper clip dispenser

Here's a magnetic paperclip dispenser inspired by those sold by maped. I use an 10mm magnet. If you print it at more than 0.10mm you'll need some support. That's why there are 2 g code files, 1 with supports and 1 without. Print detail :…

Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu

Pobrania
136
Polubienia
24
Ocena
0
P
PrintablesJeyMco

Tea bag dispenser click together system (S,M,L)

A remix of the great original. Fits pickwick (S), Teekanne (M), and most other brands (L). Useful for tea enthusiasts who get around. Printed in PLA, no supports. 0.3mm layer height and 0.6 nozzle. L (Clipper, Lord Nelson, Yogi, Good…

Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu

Pobrania
119
Polubienia
28
Ocena
0
P
PrintablesAudi

32mm and 78mm Tape Dispenser Spindles

Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…

Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
115
Polubienia
20
Ocena
0
P
Printablesmpatl

Weighted Cassette Tape Dispenser

This isn't a very complex remix. All thanks to the original model including the .step file. I've added screw holes for real screws and included hollow areas that can be filled with buckshot, fishing weights or sand (if using sand wad some…

Wydruk około 10,35 €–12,65 € nettoWstępna wycena jednego wariantu

Pobrania
111
Polubienia
37
Ocena
5
P
PrintablesAudi

32mm Tape Dispenser Spindle

This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
111
Polubienia
31
Ocena
0
P
Printableseponymous

Riser for Tea Bag Dispenser (Fits Celestial Seasonings)

I really love Tea Bag Dispenser - Faster Stackable Interlocking by pwnate , but it won't work for Celestial Seasonings teas, which aren't individually packaged. In my case, I not only needed to leave space for CS boxes, but I also needed…

Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu

Pobrania
108
Polubienia
55
Ocena
0
P
Printablescaptaincorey

Cotton Swab Qtip Holder Dispenser

I simple holder with lid for cotton swabs. It is the perfect size to accommodate the 375 count box of Q-tips! The model in the picture was made with the fuzzy skin option!! The g-code does not!

Wydruk około 6,92 €–8,45 € nettoWstępna wycena jednego wariantu

Pobrania
78
Polubienia
4
Ocena
5
P
PrintablesAsh

Wall mount glove dispenser (23cm x 13cm x 6.5cm)

Model Fits boxes up to 23cm x 13cm x 6.5cm, uses 4x 8G screws to mount. Make sure to leave enough room above to insert and remove the boxes when mounting on a wall. Parts needed 4 x 8G Screws Installation (1) Use a spirit level to ensure…

Wydruk około 15,13 €–18,49 € nettoWstępna wycena jednego wariantu

Pobrania
71
Polubienia
13
Ocena
0
P
PrintablesjonnieZG

Stylish Poop Bag Dispenser

Description A simple, yet stylish dispenser for doggy poo bags. Printing Options The enclosed 3MF PrusaSlicer model files include: A version for single-color model with no embossed image (smooth top and bottom) A version with a bone image…

Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
8
Ocena
0
P
Printableshitjim

Trash bag roll holder / dispenser + storage - up to 120mm diameter

I tried a few trash bag holder / dispenser designs and they were pretty good. Ultimately I made this, combining the features I needed and avoiding the snags. Handle a variety of brands, roll sizes - especially larger ones (we usually use…

Wydruk około 19,82 €–24,22 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
21
Ocena
5
P
PrintablesCrypdonick

Brother P750W Dispenser

The labels to be printed always flew halfway across the table in our office. With this dispenser, they are slowed down and can be picked up very easily via the ramp.

Wydruk około 5,92 €–7,24 € nettoWstępna wycena jednego wariantu

Pobrania
63
Polubienia
11
Ocena
4,33
P
Printables13Nitram

Condom dispenser Kondom box

Dá se použít jedna nebo dvě gumičky pro zvedání kondomu.

Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu

Pobrania
60
Polubienia
8
Ocena
0
P
PrintablesDik Harrison

Tape dispenser for mounting on the side of a cabinet.

In my workshop, I was using a pegboard-mounted rod to hang my tapes on and wanted something better. I saw and tried "tape dispenser - side mounted" by book (https://www.printables.com/model/514012-tape-dispenser-side-mounted) but found it…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
12
Ocena
5
P
PrintablesLOCKit

Raiser stand for cat water fountain dispenser or bowl no supports

Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
44
Polubienia
10
Ocena
0
P
Printablesredoktor

Soap dispenser key

Best results with PLA, layer height 0.7 mm, 25% infill and no supports. Created in FreeCAD. Printed with Prusa mini+.

Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu

Pobrania
44
Polubienia
6
Ocena
0
P
PrintablesMek

Dog Waste Bags Dispenser with Wallmount / Hundekotbeutelspender mit Wandhalterung

The dog waste bag dispenser has been extended to include a wall rail, a lid and a viewing window. The dispenser can be easily removed for refilling. The large opening at the front makes it easy to check the fill level. The lid is secured…

Wydruk około 12,06 €–14,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
40
Polubienia
9
Ocena
0
P
PrintablesJeyMco

Dog poop bag roll dispenser (10 rolls, max size: 6.8mm x 3.4mm)

Printed with 0.3mm layer height, 0.6mm nozzle in PLA. 3 perimeters, 15-20% infill with organic support only under the opening. Works well. Fits 10-12 baggies. I think my nozzle was a little clogged and had some underextrusion issues. (And…

Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu

Pobrania
33
Polubienia
7
Ocena
0
P
PrintablesThinksolid

Razor Blade Dispender AND Disposal (Parametric)

Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) For the parametric file visit: Razor Blade Dispender AND Disposal (parametric) - Free 3D Print Model -…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
7
Ocena
1
P
PrintablesMattis

0.50 €-Cent Dispenser

A wall-mountable dispenser for 0.50 € cent coins. Easily accessible by swiping the coins out from the bottom. Scale shows the amount of money in €. Attach to a wall with adhesive tape. If you are interested in modifying the model to fit…

Wydruk około 7,19 €–8,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
31
Polubienia
3
Ocena
5
P
PrintablesDabovos3D

Tape Dispenser

Simple tape dispenser with spikes, for easier dosing.

Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
8
Ocena
0
P
PrintablesFabrizio

washing machine soap dispenser

soap dispenser, the orange line mark the 100ml level, color change is within the gcode file (38mm from the print base)

Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
29
Polubienia
4
Ocena
4
P
PrintablesLuluX

Soap dispenser

Print settings: Perimeters: 4 Solid layers Top / Bottom: 5 / 5 Scarf joint placement: Contours Material: PETG Optional Modifier: Range 0.00-141.00 mm Fuzz skin: Outside walls point distance: 2mm thickness: 0.1 mm Required hardware: soap…

Wydruk około 3,44 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesJacob

Wall-Mount Holder for Dispenser Bottles (Max Ø 70mm / 2.75")

A sturdy wall-mount holder for dispenser bottles with a maximum diameter of 70mm (2.75"). Designed for easy installation with screws, this holder provides secure and accessible storage for various bottles, including hand sanitizers.…

Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesAWSW

Tangle free 64 AAA battery dispenser.

Tangle free 64 AAA battery dispenser. On my way to another (bigger) project about battery management, I thought you might like this battery holder or dispenser which stacks the batteries tangle free, which most holders I tried so far…

Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
3
Ocena
0
P
Printablesdvir_we

stevia dispenser

Dispenser for Stevia

Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
7
Ocena
0
P
PrintablesLazyLatte

Daiso dispenser bottle cap and funnel

There are plenty of effective funnels out there. A problem that I have is that funnels sometimes move or fall. The spills can be frustrating to clean, and so I made a cap with funnel attachment to keep it more secure. The outlet mouth is…

Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu

Pobrania
20
Polubienia
3
Ocena
0
P
Printables이 동국

Soap Dispenser wall hook (Zhiya)

You will need a glue gun or double-sided stickers to attach what you made to the wall. It may be a bit tight when you put it on for the first time. I used hot glue to attach the hook to the tile.

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
1
Ocena
0
P
Printablesyynovik

Quakers oats top lid dispenser

It's a Pop-on/off top lid dispenser for standard old-fashioned Quaker's oats containers, making it easier to pour oats out of the container in a more controllable way. I use it to pre-make my weekly supply of overnight oats. This initial…

Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesmuseofwords

Mask Dispenser

Tried it with fuzzy skin an it looked nice

Wydruk około 16,55 €–20,22 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesilantami

trailer water tank soap dispenser with a generic pump

Print with petg for outdoor use. No suports needed. I used a generic pump but you can use any pump just change the threads with the step file made in fusion 360.

Wydruk około 12,74 €–15,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
13
Polubienia
7
Ocena
0
P
PrintablesPieter Koenen

Dry Food Dispenser - Variable Dosage - Rubber Blade Gear Redesign

The Zevro dry food dispenser only allows a fixed dosage per portion. But what if you want to offer less, for example half a portion? This redesign allows just that. You can use the supplied raised decks to vary the dosage. They reduce the…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesD M

Bottle to Bottle Powder Dispenser

Bottle to bottle transfer. Travel with protein powder and other drink mixes, leave the scoop at home. I added a bottle bolt with a funnel inside to keep the screw threads clean. It works well with Gatorade and protein powder.

Wydruk około 7,24 €–8,85 € nettoWstępna wycena jednego wariantu

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesxro

Folding ruler Meterstick Gliedermaßstab Dispenser

This was a lot of fun to design and print :-) After some friends from metalab visited realraum a while ago, they improved our space by adding a few small shelves („Regal“ in German) and labeled a lot of things as “regalraum” which is a…

Wydruk około 3,94 €–4,81 € nettoWstępna wycena jednego wariantu

Pobrania
4
Polubienia
3
Ocena
0
P
PrintablesDeltaprints

Modern Tea Organizer, Tea Dispenser

This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…

Pobrania
20 677
Polubienia
7059
Ocena
4,83
P
PrintablesThreeD-Michael

Blade Dispenser for Bed Scraper XL

This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…

Pobrania
13 935
Polubienia
2988
Ocena
4,91
P
PrintablesI. Ulianych

Egg dispenser for 10 eggs

Egg dispenser hold 10 eggs from S to L sizes (up to 65x45mm). Print recommendations: Filament - PLA, PLA+ Layer 0.2mm, 2-3 Walls Infill 10-15% With Brim 5mm The Support is not important.

Pobrania
11 965
Polubienia
2757
Ocena
4,74

Eggs rotary Dispenser + slow down

Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…

Pobrania
11 319
Polubienia
1830
Ocena
4,79
P
PrintablesMintax

Custom Nespresso Capsule Dispenser

Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…

Pobrania
11 168
Polubienia
2104
Ocena
4,92
P
PrintablesPedro Alc.

Euro can dispenser

17/08/2023 Update: NOW YOU NEED LESS SPACE. I have lowered the inclination of the upper ramps by one degree, resulting in a maximum design height of only 139.089 mm. Hello there! I create this model of can dispenser because i couldn't…

Pobrania
10 415
Polubienia
4581
Ocena
4,71

Drink dispenser (different models)

Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…

Pobrania
10 350
Polubienia
6381
Ocena
4,66
P
PrintablesEnigma

Drink can dispenser

Inspired by similar-looking can dispensers, but built from scratch to actually fit cans I use and hold more cans (accommodates around 11-12 standard-size cans). The parts are split to allow printing on a Prusa Mini, with joints hidden as…

Pobrania
10 164
Polubienia
4939
Ocena
4,74
P
PrintablesORM

Battery holder for AA + AAA, wall mounted dispenser

This space saving battery dispenser is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. There is a Voronoi pattern on the sides of the magazine to make it easy to see how many batteries are left. The drawback of this design…

Pobrania
9363
Polubienia
2423
Ocena
4,82
P
PrintablesElektroarzt

Flux and Solder Paste Dispenser

This is a remix of the cool Thingiverse project of mordaha that I optimized for my requirements in the following terms: used 2x M3x20 screws as lever axles instead of 1x M3 screw and 1x filament levers have a bit more space to each other…

Pobrania
8009
Polubienia
3243
Ocena
4,91
P
PrintablesDarius V

Dishwasher Tablet dispenser

Update: 2025-11-13: Added a remix for a laser-cuttable model. https://www.printables.com/model/1479675-dishwasher-tablet-dispenser-laser-cut-version Dishwasher Tab Dispenser – Sturdy & Simple A no-nonsense, ultra-durable 3D-printed…

Pobrania
7903
Polubienia
2626
Ocena
4,71
P
PrintablesFruitieX

Gridfinity magnet stackable battery dispenser

This Gridfinity battery dispenser fits 10 AA / 13 AAA batteries per 2x2x1 Gridfinity block, plus one dispensed battery. If you need to store more batteries, you can print another block that feeds batteries into the dispenser block…

Pobrania
7578
Polubienia
1653
Ocena
4,22
P
Printablessui77

Nutella Jar Candy Dispenser

[Build video by @Ronny - thx! Don't forget to like & subscribe his channel 😉] BOM: 750g, 825g or 1000g Nutella glass jar (or get the 350g adapter from clausriber ), small candies like chocolate ( not peanut ) m&m's or skittles. Create…

Pobrania
7266
Polubienia
1975
Ocena
4,9
P
PrintablesMSBstudios

The Twin-Track Gravity Egg Dispenser (Higher Capacity Remix)

A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…

Pobrania
7095
Polubienia
1987
Ocena
4,81
P
PrintablesDobainier

Moai Tissue Dispenser

I loved this tissue dispenser from Crooked_Noozle : Moai Tissue dispenser by Crooked_Noozle - Thingiverse But it was too big to fit in my P1P and I wanted to print it in one piece. There was also the remix from Diggle ( Moai Standing…

Pobrania
6341
Polubienia
1823
Ocena
4,96
P
PrintablesR3D

Cotton Swab Dispenser with Lid

This sleek yet simple Dispenser keeps your Cotton-Swab's clean and ready for use. Rather simplistic on the outside, the internal geometry provides proper swap-feeding. Please keep in mind, that the swabs have to be pushed down a little by…

Pobrania
6105
Polubienia
1976
Ocena
4,86
P
PrintablesDema_Design

Multi battery dispenser

Printable in PLA Layer height 0.3mm No supports Sorry for the photo on the cover which unfortunately does not correspond to the .stl model because the latter has been improved. I still hope you like the model :) Changelog : Multi battery…

Pobrania
5960
Polubienia
716
Ocena
4,9
P
PrintablesDevilinside

Egg Dispenser (Eierspender)

Hallo Das ist meine Version eines Eierspenders. Es passen etwa 16-17 normale Eier rein. Es hat auch Platz für grosse Eier! Einfach zusammenkleben, die 6 Bolzen nicht vergessen. Masse: 282mm x 180mm Hello This is my version of an egg…

Pobrania
5587
Polubienia
745
Ocena
4,6
P
Printablesgkmakeit

Tea bag dispenser

Mounting options. 1. Four 10x3mm or 3/8x1/8inch disc magnets. Put a small drop of super glue under each magnet. 2. Two #4 flat head wood screws don’t over tighten. 3. Double sided tape. 4. Command strips. Alternate each tea bag 180…

Pobrania
5581
Polubienia
2246
Ocena
4,91
P
PrintablesPeter Davis

Another Nitrile Glove Box Dispenser

While this is nothing new, I designed this to have the glove sizes indicated on the holder. For my purposes I am printing each one from a different color PLA. I was looking for one that was a direct wall mounted option, one-piece…

Pobrania
5281
Polubienia
1851
Ocena
4,92
P
PrintablesCueBall909

Can dispenser (12 cans, low filament)

New version for Jan. 2024! This model previously used alignment dowels, which were fussy and required more print time. They also weren't very strong, since they were printed with the layer lines at their weakest orientation. Those have…

Pobrania
5140
Polubienia
1464
Ocena
4,94
P
Printablesfns720

FIFO battery dispensers for AA/AAA/18650 batteries

I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…

Pobrania
4254
Polubienia
560
Ocena
4,99

Screw-in Mason Jar Candy Dispenser

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Easy to print and Assemble Mason Jar Candy Despenser. Only two parts to print, prints with or without supports. Uses one M4x20mm (or similar) screw to attach the knob. Sized…

Pobrania
4113
Polubienia
1469
Ocena
4,9
P
Printablestoaster

Egg Dispenser

It's ~40cm long in total, which seems to be the typical fridge depth. It works, mostly. I did model it from scratch, specifically to adjust the tile angle and fiddle with the supports. Sometimes they rotate while falling and jam, not sure…

Pobrania
3957
Polubienia
967
Ocena
4,5

Helical and rotary Eggs dispenser

New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…

Pobrania
3793
Polubienia
433
Ocena
4,68
P
PrintablesFabioGhiro

Battery Dispenser AA + AAA

A useful and cool battery dispenser for AA and AAA!

Pobrania
3764
Polubienia
512
Ocena
4,87
P
Printablesmhparsons

Beverage Can Dispenser-12 oz

UPDATE 7/27/24: Made a number of changes: Added a “Full” version of the 5-can model with Covers Added covers with slot in the front to make it easier to remove the cans in the top dispenser. (Thanks to @Justnice980 for the idea!) Renamed…

Pobrania
3674
Polubienia
1398
Ocena
5
P
PrintablesSMACKMAX_

Pill Pods (Pillbox / Supplement dispenser)

17-04-2024: Added double threaded version as someone requested (experimental) Harder to print and needs support(the base files do not) My projects often revolve around solving niche problems i have. I typically use pill organizers for my…

Pobrania
3636
Polubienia
1603
Ocena
4,96
P
Printablesmhparsons

V2 Beverage Can Dispenser - Six 12 oz. Standard Cans

Nested and keyed Beverage Can Dispenser for standard USA cans (12 oz. / 355 ml). Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT…

Pobrania
3567
Polubienia
1817
Ocena
4,94
P
PrintablesJohnOldman

Skadis Mountable Battery Dispensers (AA, AAA, 18650) [Remix]

I couldn't find a decent pegboard mountable battery dispenser since most of them were split for easier printing and ended up being not very stable. fns720s dispensers looked like exactly what I was looking for except that they are meant…

Pobrania
3505
Polubienia
695
Ocena
5
P
PrintablesLT_Davis

12oz or 16oz Can Dispenser 2.0

Made with stronger connection points and improved printability. Designed to be printable on the Prusa Mini in 6 parts (excluding brackets) or on the XL in one go! Now with optional extensions. The extensions make for an overall length of…

Pobrania
3484
Polubienia
1072
Ocena
4,89
P
Printablespwnate

Tea Bag Dispenser - Faster Stackable Interlocking

This is a remix of the tea bag dispenser by gkmakeit. The dispensers can interlock together and stack together. It is also faster to print and uses less material (if bottom is printed semi-solid). Printed in PLA at 0.2mm layer height with…

Pobrania
3464
Polubienia
543
Ocena
4,9
P
PrintablesUpcrid 3D

Ultimate Weekly Pill Organizer & Dispenser Gravity Cascade

Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…

Pobrania
3437
Polubienia
1335
Ocena
4,57
P
PrintablesThreeD-Michael

Blade Dispenser for Bed Scraper

This is a useful Blade Dispenser for my new Optimized Bed Scraper with replaceable blades. The dispenser holds 45 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…

Pobrania
3386
Polubienia
701
Ocena
4,84
P
PrintablesChi-bum

egg dispenser

for the correct position use pieces of filament inserted into the prepared holes in the models 9.11. I uploaded a large version

Pobrania
3314
Polubienia
500
Ocena
4,76
P
Printablesdom.3D

Alktopus / Shot Dispenser | Updated Version

The Alktopus - Your party partner with eight arms! With the Altopus you can elegantly serve the next round, please your friends and all without spilling anything. Whether you're at a beach party, celebrating your birthday, or just…

Pobrania
3300
Polubienia
261
Ocena
4,13
P
Printablessuit

Modular Hydroponic Tower Garden (Dispenser Lid Low Profile)

since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issue prints with…

Pobrania
3287
Polubienia
186
Ocena
5
P
Printablesmonev44

Modular Can Dispensers - 5 Sizes

A beverage can dispenser made of strong stackable modules that can hold any amount of a beverage you would like to have on hand. Either in your fridge or elsewhere. I wanted it for my redbull addiction, but I used parametric design so I…

Pobrania
3228
Polubienia
691
Ocena
4,8
P
PrintablesVari

Tape Dispenser - Handy

Print-in-place tape dispenser. Almost takes no more place than the tape-roll itself, so it can fit in your pocket. No supports required. Tested with PLA and PETG, may also be printable in ABS and any other rigid materials. The design…

Pobrania
3167
Polubienia
739
Ocena
4,43
P
PrintablesNorbert Harrer

Ultimate Dual AA & AAA Battery Dispenser

This is a storage unit and dispenser for AA and AAA batteries. It holds up to 39 AA and 35 AAA batteries. Print the main part twice, with one side mirrored. I’ve also included pegs to attach the parts together. A few drops of super glue…

Pobrania
3152
Polubienia
968
Ocena
4,64
P
PrintablesCAD-Guy

Can dispenser

Perfect dispenser for can´s in the frideg. First in first out, so you always have a coled one :) One dispenser consists out of two parts, there are two center pivot´s for the perfect alignment by glueing together. RedBull 250ml CocaCola…

Pobrania
2889
Polubienia
596
Ocena
4,93
P
PrintablesSAIFDESIGN

Egg Dispenser - Vertical Storage Tray

Vertical egg dispenser. Great for saving space in the fridge Can take up to 20 large eggs depending on side. tested ok My first design! You may need to shrink before printing for small eggs to print without support split one of the…

Pobrania
2824
Polubienia
378
Ocena
1