Liczymy pasujące modele…
Here is a nice quick print based on a request from @aRoguegumsheild for his #BigBenchyBlowout a small fun stand to display a Benchy. I hope you enjoy. Thanks Bugman If you like what I am doing please consider buying me a coffee or…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
I designed this mount so there is no risk of the dock and the switch to fall to the floor by a light tug on a cable. The hinge on the back of the Nintendo switch dock lock into place with the slots in the printed wall mount. To mount the…
Wydruk około 4,31 €–5,27 € nettoWstępna wycena jednego wariantu
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
After finding the original HP G5 mount and having had difficulties mounting it under my old desk, i figured i wanted the way of mounting it to be different. screwdrivers up to a width of 10.5 cm in diameter should fit the hole where the…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena jednego wariantu
Simple to build PS5 controller charging dock that only needs 2 USB C cables and 4 M4 screws, built in fusion 360, easy print that doesn't need support material and simple to follow instructions, compact and elegant design that will look…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Created a mount to have the HP docking station mounted under a desk. As HP have several products called “HP G4”, this model is for the HP G4 Thunderbolt dock. The dimensions of the dock are 98 x 98 x 68 mm I printed this with PLA as I…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena jednego wariantu
I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple charging dock for your Apple Watch, to your night stand or desk.
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
I wanted to display my iPod Classic 160GB and in Parallel have it on a Dock, so I created a small stand where you can put in the 30pin cable and charge it well. Printed with PLA and 5% infill (you could do more for stability)
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…
Wydruk około 10,68 €–13,06 € nettoWstępna wycena jednego wariantu
Nothing/CMF watch 2 Pro charging dock/stand
Wydruk około 3,75 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For those who have the HP G5 docking station and want to clean up your work area a little, this is the perfect print for you! The VESA pattern is for 75 and 100 mm spacing. I used a spacing plate from Icy Box to mount the dock directly…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
This is a remix of Scott Yu-Jan and OVERWERK https://makerworld.com/en/models/615378#profileId-538769 I shortened the back of the unit to save some filament costs. Removed the airpods charging slot as I dont have one (this also helped…
Wydruk około 11,00 €–13,45 € nettoWstępna wycena jednego wariantu
- The perfect magsafe charging dock for your iPhone - simple design, two Parts, four options for angle and tilt. - Easy to print (no supports) and easy to assemble. Just click in your magsafe charging port. Print Settings · model in…
Wydruk około 3,16 €–3,86 € nettoWstępna wycena jednego wariantu
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
Wydruk około 9,82 €–12,01 € nettoWstępna wycena jednego wariantu
this model is created in Solidworks and i printed it on a MK3S MMU2s with a 0.6 mm nozzle. the mmu2s is not required 18/8/2023 Update i changed the tolerance on the slot for the cable so it fits a bit tighter
Wydruk około 2,54 €–3,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top. This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water…
Wydruk około 7,81 €–9,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This dock is intended for the old white charger – the new metal one fits but has a loose fit. It would be awesome if someone wanted to remix the attached files to make an updated model. Though optional, the design is elevated by using 3x6…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed original Dry Dock model to have places for x3 Benchies side by side, since you can never have enough Benchies. Also it's a solid stringing test for the upper part. Sliced version with colour stop included, in case you want to…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
Petite étagère pour Ikea Skadis pour le modèle de Bugman_140 Dry Dock pour le fameux Benchy. Impression facile en 0,2mm en PLA ou autre, avec un remplissage de 10%, avec supports. ------- Small shelf for Ikea Skadis for Bugman_140 Dry…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
Samsung Galaxy Watch 4 charger dock
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally. For very large phones, the movable holder can also be mounted upside down, so that even…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
Doc Brown from Back to the Future sitting on a box of plutonium.
Wydruk około 8,29 €–10,13 € nettoWstępna wycena jednego wariantu
Goomba Tower Doctor + Goomba Tower Doctor Finger Puppet
Wydruk około 2,41 €–2,94 € nettoWstępna wycena jednego wariantu
General I really like the look of the official Steam dock so I tried to get it as close as possible to the original one. The dock used in this build is the 8 port uniAccessories dock. I like this one because it looks very clean, is small,…
Wydruk około 5,77 €–7,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dock for holding the DF500 up, to the MFT3 table aluminium profile. Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. The DF500 slides and is held tight…
Wydruk około 8,41 €–10,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A document holder, curved tabs for holding loose paper without it falling over. Declutter your workspace without the size or desktop footprint of the usual staples offerings.
Wydruk około 11,61 €–14,20 € nettoWstępna wycena jednego wariantu
Background As a software engineer who heavily relies on Docker containers, I was inspired to bring a piece of the Docker ecosystem onto my desk. Unable to find a suitable 3D CAD model, I embarked on a journey to create a 3D representation…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
I wanted an upright stand that held the SmartThings wireless charging station that came with my S23 Ultra. It's rough around the edges, and I'm certainly not an experienced 3D modeler, but this will charge even with the SView case on the…
Wydruk około 8,45 €–10,33 € nettoWstępna wycena jednego wariantu
The ASUS ROG Ally is a bit too thick to fit securely in a Steam Deck Docking Station. This adapter fits around dock, so that it has a larger front edge to comfortably hold on to the ROG Ally. A Steam Deck will still fit into the dock as…
Wydruk około 1,39 €–1,69 € nettoWstępna wycena jednego wariantu
A caricature of Peter Capaldi as the 12th Doctor Update: Added a multi color version for those with a Bambu AMS or two. This is an untested version as I don't currently have an AMS system. Bambu-A1-Multi-Color-12th-Doctor.3mf is the file…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Just to finish the sequence, a caricature of David Tennant as the 14th Doctor for the 60th Anniversary specials.
Wydruk około 3,45 €–4,22 € nettoWstępna wycena jednego wariantu
Being a retooling and scale accurate to the action figures, this model utilizes both Ellindsey's model aesthetics and snap fits, as well as Audrey2's incredible Dalek model details. For both the OPEN and CLOSED midsection versions of the…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
A fully functional charging dock for the New 3DS! It also comes with swappable plates that you can print in multiple colors. Best of all, this works with most printers, because you simply have to change filament at certain heights. I took…
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
A stylish dock for your Oneblade QP2724 with snap in charging feature - keeps your OneBlade ready for action anytime!
Wydruk około 3,39 €–4,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My new phone doesn't fit in my old stand, so time for a new one. I wanted to make sure that it lasts longer though, so I added some “future-proofing”: The sides are open to support any width of phone, The cable is held by a separate…
Wydruk około 5,48 €–6,69 € nettoWstępna wycena jednego wariantu
I love the Analogue Pocket and its dock. However, the dock has an annoying design flaw. The dock's USB-C plug is slightly taller than the recess it sticks out of. These guide rails (ugly, but functional) make it much easier to line up the…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Straightforward and reasonably quick print with 0.3mm default settings. Supports required under mounting wings. 0.150" holes for screws. Shown here in Flashforge Rainbow PLA. The power supply has the same dimensions as the dock itself and…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena jednego wariantu
Simple stand for the Lenovo Thunderbolt 3 Gen2 dock (Modelnumber 40AN) You will need to remove the rubber feet from the part of the dock that goes into the stand. It's a pretty tight fit, so depending on your printers accuracy you might…
Wydruk około 2,81 €–3,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The car have been designed by Captain JimiPie. Please refer to this Thingiverse site https://www.thingiverse.com/thing:5547978/files. Thanks Captain JimiPIe for this very nice model. I only designed carpets and motor ventilation slots to…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Deutsche Version: Dies ist eine einfach Halterung, welche über das Display im Auto gesteckt wird (in meinem Fall ein Audi A4 B9). Vorbereitet ist die Halterung für bis zu zwei Tragarme, wobei diese frei gestaltet werden können, wie z.B.…
Wydruk około 5,39 €–6,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created a view F1 Commando Paddock Stands for my Diorama. 1- is a short for 1:100 2- is for 1:43 Modells with and without podium. 3- is also 1:43 Modells but 50% wider. 4- Seats are also made in another Make: Seats for Paddock Stand…
Wydruk około 0,63 €–0,78 € nettoWstępna wycena jednego wariantu
Un support pour Alexa
Wydruk około 5,83 €–7,12 € nettoWstępna wycena jednego wariantu
The Amazfit Bip 6 uses a small magnetic USB-C charging adapter that clips onto the back of the watch. Unfortunately the magnet is fairly weak, so the charger can easily shift if the watch moves or if the cable pulls slightly on the…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
EN: This is a dock I have designed for our ABC Design Stroller “Salsa 4” or better said for the carrycot that is part of the set. I wanted to build a table for the living room with the docks attached on the top to easily use the carrycot…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple dock to charge your Arizer Solo II in. The Solo II can be slid into the dock from the front onto the charging plug.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
EN Simple bookmarks for medical records. Quick patient identification by alphabet. Easy printing. Easy colour change at 2.2 mm and 3.2 mm height. Downloadable f3d file to edit your own letter or size in Fusion 360. CZ Jednoduché záložky…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
This stand holds a Dell Thunderbolt dock (model WD19TBS) and a laptop. Notes Room for front USB cables attached to dock Cables can be routed through stand Does not block airflow Leave laptop open to act as a second monitor Printing Does…
Wydruk około 25,83 €–31,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a laptop stand with three slots: one for a Dell power brick, a Dell WD22TB4 docking station, and the last slot for a Dell laptop. Printed several of these for my “workstation image bench” to tidy things up and allow for more…
Wydruk około 5,93 €–7,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Under table cradle for Dell WD15 docking station - we needed a way to mount it near the cable opening in the meeting room so that the cable is maximally long. This screws in right beside it with easy access to the plugs for cables. Use…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
Per sostituire il supporto girevole della doccia. fare attenzione va stampata con l'attacco doccia verso il basso altrimenti tende a non entrare. l'ho realizzato con tolleranze strette si può allargare un po'. altra cosa verificate la…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A wall-mountable dock for the Anker PD 533 Powerbank. The USB-C Cable I used is branded “NIMASO” on Amazon, it might work with others, but I can't say that for sure. I included a .STEP file if you need to make any changes. These are the…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Got a Roomba s9+ with the tab that moves the bag tube broken. You can not purchase this part and finding a used replacement is VERY hard, SO I designed this two piece fix for the tube tab. printed in PETG with 100% infill 4 perimeters and…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here are the Seats, which you can use for the Paddock Stands; Paddock Commando Stand von Urs Hofer | Kostenloses STL-Modell herunterladen | Printables.com 1:43 and 1:100 enjoy
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model in Tinkercad from scratch. It prints in three pieces. The top roof is done so you can install a blue led on it while allowing access inside the tardis. Print multiple windows with the one provided. I used blue PLA…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This is a under-desk mounting bracket for the Dell WD15 USB-C dock . This model leaves a bit of space on the top for cable routing, and the power supply bracket has some hooks for additional help with cable management. It's a good idea to…
Wydruk około 6,50 €–7,95 € nettoWstępna wycena jednego wariantu
I designed this stand to hold my iPhone 11 Pro Max at the appropriate height to charge wirelessly and also be at a good height for viewing on a desk or nightstand. I designed it to work with the Mophie dual wireless charger. Print…
Wydruk około 11,29 €–13,80 € nettoWstępna wycena jednego wariantu
un petit support pour 4 accus 18650
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
Wydruk około 6,53 €–7,98 € nettoWstępna wycena jednego wariantu
Holder specially designed for the remote control of Nordic Fire/Ravelli pellet stoves. Holder has a base plate and the remote control is placed in the holder at an angle. Printing instructions: PLA 0.20 mm layer height no supports Infill…
Wydruk około 2,80 €–3,42 € nettoWstępna wycena jednego wariantu
i wanted to make some decks that were themed for the new doctor who commander decks as well as making making the decks more easily stackable, in my variants there are just plain old stackable versions without any logos/sides on them for…
Wydruk około 11,18 €–13,66 € nettoWstępna wycena jednego wariantu
This is a stackable Benchy dry dock, it can allow you to present your collection of Benchys (or Benchies)in a neat and orderly fashion. This can allow you to keep all of your Benchys ( or Benchies) in one place, keeping everything neat.…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My design is perfect for Xiaomi Mi Wireless Charging Pad and for Airpods type headphones also for your wallet and pens. If you want to get the same effect as me (transparent triangles in the base) use my 3mf file for Prusa slicer. :)…
Wydruk około 11,32 €–13,83 € nettoWstępna wycena jednego wariantu
I needed some form of document camera to be able to digitize hand-drawings reasonably fast. Since they're 60+ Euros and I had a webcam around I decided to build a stand for the webcam. Additional material required: 2x40cm 8mm…
Wydruk około 3,68 €–4,49 € nettoWstępna wycena jednego wariantu
Requires supports (the top edges are only cosmetic). Requires 4 threaded M3 inserts and M3x5 bolts (supports also M3x8). You'll also need a USB-C extension cable to be able to connect the USB dock to the Steamdeck. The holder is based on…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional Fits FCC ID SHKASCEHB9
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Converts the Belkin AVC006 USB-C Hub into a fully enclosed Steam Deck Dock. Ran out of good new filament so I used old filament in the pictures (sorry). Tolerances were made for printing at 0.3mm layer height. IMPORTANT! Print the top…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Smartphone support for a Tesla Model S/X. Mounts with the screws available in the car. Similar to the dock available on the Tesla website. Simple cable management. Not for iPhone max models. Add supports to your liking. Standard slicer…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For Pixel, stand, charging dock. Simple stand without support structure, little material consumption.
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
I really liked this model and there was a suggestion to create a 45 version of it so I made this. Print with the 45 degree side down. It requires no supports. Happy Printing! Edit 10.6.24: Added an M5 nut for the back of the Dock plate…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
USB gadget für den Schreibtisch
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Este es un "remix" del diseño de Doremus, lo que he hecho ha sido adaptarlo para poder ponerle un ventilador en la parte de atrás del dock de Nintendo Switch sin tener que romper el original. Esta diseñado para un ventilador de 80mm que…
Wydruk około 5,50 €–6,73 € nettoWstępna wycena jednego wariantu
While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Grill (120 mm, 140 mm) one, two or three colours
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
I printed the “Clean iPhone Dock” by @Henne — you can find the original design here: 🔗 https://www.printables.com/model/1017247-clean-iphone-16-pro-max-dock-applewatch-case One thing I didn’t love: the eject button stays pressed down when…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
This adapter keeps the USB type A Dongle from LedLenser standing steady on the table, turning it into a convenient charging dock. Confirmed working with the P5R Core and P7R Core , but should work with diameters up to 30mm. Let me know if…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Replacement push button for the Icy Dock MB982SP-1S 2.5" to 3.5" hard disk adapter cage. The original part is made of fairly brittle plastic, and due to the heavy swinging door often hitting it with force in a particularly nasty way, the…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a catch-all tray with a dock for an Apple Watch. The depth is about 10mm and the dimension is about 230mm/120mm.
Wydruk około 7,86 €–9,61 € nettoWstępna wycena jednego wariantu
Shelf for series printing on prusa mini. Numbering from command line. Ready with support cones.
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
Designed to fit Plexgear Multiadapter USB-C with 9 connections.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview This custom-designed charging dock combines function and minimalist aesthetics, tailored specifically for Apple MagSafe-compatible iPhones and the Garmin Fenix 7/8 smartwatch. The dock consists of two interlocking base…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
3 perimeters and 1mm top and bottom solid thickness is optimal (or use my PrusaSlicer 3mf with special raised walls and raised infill for the rod part of the model) additional parts: 3 screws 1 small tightening strap (2.5mm wide) to fix…
Wydruk około 5,60 €–6,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional After printing, the charger cable presses into this part. It takes some force, but this…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Čtečka čipů pro docházku žáků a následné automatické zapsání nepřítomnosti do systému Bakaláři
Wydruk około 6,82 €–8,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I leave this dock on my desk most of the time but I don't have the Pocket in it. I created this adapter so I can use it for my phone, small tablet or alternative handheld gaming devices. I printed using PLA at .20mm layer height. I know…
Wydruk około 1,25 €–1,52 € nettoWstępna wycena jednego wariantu
This model is based on the Trilogic game ( Towers of Hanoi ) created by The Toymaker in Dr Who. The Doctor is forced to play this game in episodes The Celestial Toyroom , The Hall of Dolls , The Dancing Floor , and The Final Test from…
Wydruk około 7,45 €–9,10 € nettoWstępna wycena jednego wariantu
I Remixed the Steamclip - Steamdeck Attachment System - VESA Attachment by Mike Brumm to create a dock where I could attach my battery my steam deck and my Anker A8352 hub. I borrowed pieces from different sources to create this dock that…
Wydruk około 18,83 €–23,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Porta Sapone, Spugna, Shampoo, qualsiasi cosa per tenere in ordine la propria vasca da bagno o doccia. Enjoy !
Wydruk około 14,67 €–17,92 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “Doctor of Hard Knocks”, with art of a mortarboard hat and rolled scroll diploma Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Original piece of plastic keep broking and you can only buy new full shower kit. So I made this little plastic spare part! :-)
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Last year, I bought my first Foreverspin Top and Spinning Base during their annual sale. This year, I picked up two more tops. This is my way of being a little more organized about them.
Wydruk około 4,04 €–4,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I would love to share with all of you my holder/dock for Apple's M4 Mini with integrated OWC Express 1M2 holder enclosure. With added notch for the power button Print Setting's : I Recommend PETG or any stronger more heat resistant…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stand with a cutout for the charging puck(?) that comes with the Carbinox X-Ranger Watch (https://shopcarbinox.com/products/carbinox-x-ranger), designed to be printed with minimal supports while still allowing for the watch strap to sit…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena jednego wariantu
Marvos S 80W - Dock V1 - Kit only Dock V1 - Kit + Pod Dock
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
Cerniera di ricambio per box doccia compatibile con sistema Novellini R04PET. Questo componente è progettato per il ripristino o la sostituzione delle cerniere originali nei box doccia e sopravasca delle serie Aurora e Peter. Il modello…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
This is still work in progress. I make this for my Prusa XL as a dock for my DryBoxes supporting the RFID reader from the Project SpoolSense.org This enclosure is part of the SpoolSense ecosystem – an open-source project for tracking…
Wydruk około 6,00 €–7,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
