254 modeli
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a "lock" which means you can tell at a glance (just poke your head in the room) if the cage doors are completely closed. It's for piece of mind since otherwise to know the cage is fully closed you must physically tug on each door,…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
Deutsch: Ein kleine kleine Verbesserung für den Luba, um ihn 4, 5 oder 6 Messer pro Seite zu ermöglichen. Was brauchst du: (8x/10x/12x) Ruthex M4x8.1 Gewindeeinsätze Tipp: Zudem empfähle ich Klingen zu verwenden die Hinten angeeckt sind.…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…
Check out how to assemble the model here: 29/01/2024 - V2 Now Available! This is an outdated version that I have left up for posterity, the newer version can be found here:…
Link zum OSVac System: https://ossso.de/osvac/ Adapter für die Tischkreissäge DeWalt DWE 7492 um diese mit dem OSVac System zu verbinden. An dem Adapter wird auch gleich die Absaugung für die obere Abdeckung angeschlossen. Druckdaten:…
Gas Can (Midwest) Nozzle / Spout with Breathing Tube This is my second Gas Can Spout design. The old design was straight with no breathing hole. This one pours way more easily + faster + smoother. That tube at the back is just a tube I…
How to Assemble the prop can be found here: https://go.screenpal.com/watch/cOVvfCn3wXB [30/1/2026, after youtube took down the original video, managed to get ScreenPal to work, let me know if there are any issues] Dimension 448mm x 52mm x…
DEWALT table saw that is nearly 1:1 ratio to the actual DWE7492. I created this model for designing a workbench in my workshop.
The forest dweller‘s sword! Some parts need supports and some do not, use your sense. I haven’t printed this yet, if you have any issues PLEASE tell me and I will help you. However, I can’t fix everything so please make sure you will be…
The miter slot on the True-FLEX featherboard didn't fit my dwe7485 so I took the exact dimensions of the crosscut miter that came with the saw and made a compatible miter slot for the board. Uses m6 screw and nut
Midwest / Scepter Gas Can Nozzle and Cap (with f3d for customization) I designed a better one here: https://www.printables.com/model/460322-gas-can-midwest-nozzle-spout-with-breathing-tube IMPORTANT NOTE: Please be very careful when…
This t-track uses a m6 bolt, I'll add more sizes if there are interest. The bar is slightly beveled to make insertion easier. (The featherboard can be found here: https://www.thingiverse.com/thing:4228110)
I created an adapter for the dewalt grinder so that it can be connected to a 35 mm hose. The adapter fits snugly.
The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…
Invite eerie ambiance to your print queue with this Haunted Cottage! Cracked stone walls and warped timber beams converge beneath a steeply pitched roof and twisted spire. A gnarled dead tree leans over the crooked fence, pumpkins gather…
Rigid NXT Shop Vacs already have a rotating coupler on the end with a locking attachment. I designed this to attach the Rigid shop vac to Dewalt DWE6421 and DWE6423 orbital sanders. This adapter has a feature that helps still utilize the…
The original design requires that the cardboard player boards be inserted into the insert to keep all the components together, but the player boards are damaged by frequent insertion and removal. These covers can be used instead, while…
An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…
These adapters are made for the DEWALT DWE7492 Table saw adapter : - ID 35mm for shop vac - Port for 31.5mm ID hose to riving knife Riving knife adapter : - Tapered that goes inside the riving knife - Port for 31.5mm ID hose Fusion 360…
This is a pistol grip. Use it however you like. Has been hand tested and can fit a wide variety of hand sizes. UPDATE 9/24/23: Added more fillets and hexagons. Old files were uploaded improperly.
Although I have a plus sized print bed I especially like the 200x200mm “ Light SKÅDIS (Skadis) Board” by grafit.xyz and wanted to add a couple more options. Here is a midweight “accent” panel to add a bit of aesthetic. I even like the…
Connect your DWE7485 to your dust collection system
Cooling for inventer GoodWe with 120 mm fan
Designed around the 2.5" ultraflexible hose on Amazon and has an adapter to take advantage of the blade guard in order to collect dust from both under the blade and over the blade. Hose https://www.amazon.com/gp/product/B01M35BE8D/ Hose…
These are simple brackets that fit over the feet on the DeWalt DWE7485 / DCS7485. They allow you to easily & securely mount the saw in place as I found the original mounting holes to be very awkward as they are at an angle. Are a ver good…
Could fit to other DeWalt random orbit sanders and vacs.
Player of th Match trophy. Qatar 2022 Budweiser Made in the metaverse with Oculus Quest 2 Happy Printing From Portugal :)
The Treadwell Droid has a claw utility arm. The found prop is an ice cube grabber. These are still available to buy, but I wanted to 3D draw it up to see if it would work. I drew the two pain components, the claw body and the actual…
This adapter allows 1 vacuum to connect to both the main dust port and the blade guard dust port at the same time.
These clips are made for the DEWALT DWE7492 These clips allow you to hold and remove the tablesaw when it's needed. No need to unscrew it, just grab it and move. I recommend you to print it with the " U " face against the bed. My table…
Miter track slider for Dewalt table saw DWE7485, designed for use with this featherboard https://www.printables.com/model/172907-featherboard-for-woodworking-no-supports-needed-wi , but can be used for anything. Designed for use with M6…
This is one of the first 3d models I started when learning blender. I have finally bitten the bullet and decided to upload this file. I haven't finished the paint job, however check out Silverrend Props inspiration on painting Dwemer…
I created this to allow for print on my smaller printer (Bambu P1S) and to then assemble with screws. Added a solid bar across the middle with 2.5mm holes for m3 screws to thread the pieces together or a narrower bar to use an m2 screw…
27 pieces need to be printed.
Assembling > following things are necessary: 2x M6x60 socket head screw 2x M6x30 socket head screw 4x M6 nuts You can easily change between the 90° and 45° angle.
Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=1246651 Print instructions Customized using the following options: LargeEndMeasured =…
osVAC Adapter for the lower vaccuum port of the DeWalt DWE 7492 table saw. I printed in PETG, but other materials should work, too. No supports needed when you print with the table saw side facing the printing bed. Feedback Feedback?…
Modely pro doplnění aktivního chlazení ke střídači Goodwe ET 10kW. Předpokládá 5ks 12V větráčků 70mm spojených 16ks FAN_SPOJKA (použity šrouby M4x25, matice M4) Uchycení ke střídači za jeho krajní žebra, na držácích jsou vždy 2 přítlačné…
Wanted to increase the rip capacity of me DWE745. Instead of buying original, and costly, replacement rails and joining i decided to design them myself. I printed them upright (hence the max 250mm) on my Bambu Lab X1 Carbon using eSun…
Print Settings Printer brand: Prusa Printer: MK4 Rafts: No Supports: Yes Material: PLA, PETG…
An adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Both ends have a slight taper.
6/18/2026 Looks like there may be some size differences in mounts. I added a zip of alternatively-sized mounts, incrementally smaller. These are NOT TESTED because they don't fit my mount. Please let me know your successes or failures…
Da mit kann ich mein Wechselrichter mit 4x 120 Lüfter Kühlen This allows me to cool my inverter with 4x 120 fans
Quick attach sander adapter. Fit ShopVAc hose.
I've seen a few fence spacers but none that would really work with the Dewalt DWE7485 A common issue I was having with clamping offcuts to the fence was the fact there's a push stick and not really too much room on the fence to clamp…
Allows mounting for the installation of a sandpaper disc
28mm vault dweller for tabletop
The chamfer makes the part compatible also with countersunk wood screw.
Brillenablage in Form von Werkzeug bestehend aus einem Halter, dem Werkzeug und einer Schraube.
Update If you use the osVAC system, have a look at the similar osVAC compatible vacuum adapter I made that you can use to connect your DeWalt table saw to the osVAC system here:…
This model is compatible with the lego system.
I print it all in PLA without support. Nozzle 0.6; Layer Hight 0,36
The included steel water dish holder makes it impossible to remove the dish to refill it without it suddenly releasing and spilling water everywhere. This was a replacement holder for "MidWest Homes for Pets Snap'y Fit Stainless Steel…
I love seeing our garden filled with different animal species, because each one plays a vital role in maintaining a balanced ecosystem. However, in our little urban enclave, birds - especially the smaller ones - often seek refuge in the…
A lighter or heat may be needed to smooth some edges
Stand for iconic gun Caldwell Conversion Uppercut from the game Hunt: Showdown. It fits for this model: https://www.printables.com/cs/model/280552-caldwell-conversion-uppercut-v1/comments Happy printing!
This is a simple rain cover for the PUC from Birdweather. https://www.birdweather.com/#puc This cover protects the PUC from heavy weather (even though it is weatherproof) and allows you to mount it to a wall/fence/post. Printed WITH…
Another laser cut scatter terrain piece of Star Wars Legion, this time a treadwell droid. Its not terribly accurate, but it's as close a 3mm on one side as a constraint as could be. Print Settings Printer: k40 laser cutter Notes: Cut and…
Budweiser Logo Plaque Category: Other
Nozzle to dispense Goldwell hair color product into a bowl for mixing. This is the old method, not the new way which dispenses from underneath into the base of special bowl. Compatible with Goldwell's latest canister system. Print a few…
Mini 13: Figurine System Compatible Headgear Set including: Yarmaluke Kiffah Fezz Niqaab Hijabi Headgear configured with a slot for adding a magnet. Positioning is based on compatibility with my various Facial Hair Head designs.
Title says it. I've had a few of these split on me, so decided to model one a bit heavier. Fits the diesel, kerosene, or gas cans. Print with spout opening up using supports, as the thread shape is odd with a flat on top.
Neon effect Budweiser sign for home bar, the 3D printed parts were glued to black acrylic background. Holes drilled in acrylic allow light from LEDs behind the acrylic to illuminate the sign. Print Settings Printer Brand: Prusa Printer:…
The make in the photo was; Printed on an Ender 5 plus 0.2mm layer height 2 perimeters 5% infill 11.5hrs print time For post processing, see below steps if you want to some tips on replicating the same look in the photos. 80 grit sanding…
Simple one-part print, best done with “upside down” orientation and snug support. Will hold a Woodpeckers SS square , a Paolini Pocket Rule and 2 Pica Pencils/Pens Installs by sliding onto the rail of the MFT Table. It can be positioned…
The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
Vhorlath Realms – Season II: Shadowed Empires Dark Elf Voidweb Priestess 3D printable STL miniature for dark fantasy tabletop RPGs, miniature painting, collecting, display, and wargaming armies . The Voidweb Priestess is a sinister and…
The Dreadweaver is a terrifying hybrid creature, combining the features of a spider and a scorpion. Its elongated, jointed legs allow it to move swiftly across any terrain, while its venomous stinger, arched high above its body, threatens…
for mounting GPS receiver on quadcopter drone on the nose over the FPV camera FITS: Lumenier QAV-S 2 Sub250 Joshua Bardwell SE 3in frame link HGLRC M100_Mini GPS link MATERIALS: TPU 95A (optional) M3x6 or M3x8 screws (4 each) PRINTING…
When viewing in rhino7, you will have to manually adjust the position of the house and the rendered material.
This is a Bud Light and Budweiser set of koozies. They fit US 12oz glass bottles. I store them in the freezer so they are nice and chilled when you need them. For multi color printing use the STEP files so you can select objects…
Upgraded Version of the original File with adjustable T-Slot slider! You can use the original 8mm dial indicator mount from the original author. Fusion 360 File is added! Thanks to the original owner!
This is a remix of a Skyrim Dwemer Gear that I found on thingiverse. When looking at the ingame model, I noticed that it was double sided and thin. Printed the one in the images with Polymaker PLA+ Black at 0.2mm layer height, 10% infill…
Ersatzteil für SIKU 4258 Claas Lexion
Uses a twist lock like the actual connector. This should theoretically fit any DeWalt tool that uses the DWV9000 universal quick connector, but I don't have any other tools that use it to be sure. This was modeled using a DeWalt DWE6423…
This is the shroud I use to cool my GoodWe 10K-ET+ inverter. It’s designed to hold four 92 mm PC fans, which keep the temperature below 45 °C, even during summer. I’m using four ARCTIC F9 PWM PST fans, controlled via PWM signals generated…
Capture the vibrant beauty of the ocean with this 3D printable STL model of a Clownfish. This lively marine dweller is perfect for adding a splash of color and aquatic charm to your displays, aquariums, or miniature ocean scenes. All…
After using my original design for several months, I decided to refactor my designs and add some features to improve the usability of the boxes: Rounded boxes -- All of the boxes now use rounded corners and edges that make them more…
This is a sanding adapter for the Dewalt DWE6411 Pad sander. It connects to a 1 1/2" shop vac hose. I included a vented and non-vented version. I was concerned it would stress the shop vac too much to pull only from the small holes in the…
The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
Dewalt DWE7485 to Festool 27mm hose adapter
ZenLith – Die Perfektion der Natur, gedruckt für die Ewigkeit. Holen Sie sich die zeitlose Eleganz eines japanischen Bonsais auf Ihren Schreibtisch – ganz ohne grünen Daumen. Der ZenLith Artisan Bonsai von F.W. DESIGN ist mehr als nur ein…
Impreso en Pla, el ancho es de 2mm con un diámetro de 12cm, el posavasos lo he impreso con una Ender 3 Neo venida de fabrica sin modificaciones, el modelo presenta un problema y es que ni empezar a imprimir pide un cambio de filamento, es…
Mount for the Midwest Industries AR-15 Lower Receiver Block on Multiboard. Connects to multiboard with snap fit. All I did was take a lower receiver STL and cut it up, it's quick and dirty but works. Print using your standard settings.
I couldn't find an adapter that fit my Dewalt DWE6411 sander and Ridgid HD06001 vacuum, which has a 1 7/8 inch hose, so I followed this great tutorial by Becky Stern and used Tinkercad to design one. I assume this would fit any brand…
The WyrdWeard Amulet. (Old English for Fate-Turning) The Wyrdweard Amulet: Unveiling a Destiny-Shaping Relic On the rugged shores where the whispers of the sea meet the imposing presence of a newly established Christian kingdom, a recent…
One sided Large Dwemer Plate Steel, created based on in-game screenshots. I do have a mostly completed 2 sided version but decided against it, to reduce both supports when printing and post processing time. If someone is interested in…
Wonderful Job on the original by Immaculato solving the big problem of the Caldwell unit being a magnet for bullets and self destructing, however, every time the sacrificial reflector receives an impact it has to be replaced with a new…
This remix of the DeWalt DWE6423 Sander Wall Mount has been scaled up by 4% to create a slightly looser fit , allowing the sander to be stored with sanding paper attached . It’s modified to include the Skadis T-clip mounting system ,…
Zweistöckiger Schriftzug „Jugend Weihe“ – Modernes Design Dieser stilvolle, zweistöckige Schriftzug wurde speziell als dekoratives Element für die Jugendweihe entworfen. Das Modell kombiniert eine moderne, serifenlose Basis mit einem…
I resized the slot to .1mm this should make it much closer to being zero clearance. Increase the walls in your slicer.
Thick girl vault dweller fallout who is ready for combat. One version with a base included, but the one without is pretty stable. Be careful removing the support around the sword and hand. It might need a snip or two and a but of a…
This is a rain shield for BirdWeather , a smart bird identifying and logging device which will record and catalog your local avian neighbors. The device is weatherproof but could use a bit of extra protection for its USB port and…
osVAC Y-Adapter for the DeWalt DWE 7485 table saw, for the lower vacuum port. osVAC Y-Adapter für DeWalt DWE 7485 Tischkreissäge, für das untere Absaugrohr.
