Liczymy pasujące modele…
This is a simple adapter for the Dewalt DXCVXA06B battery powered vacuum to the Milwaukee 49-90-1996 antistatic hose. I made this because the hose that comes with the Dewalt vac generates a lot of static. The Milwaukee hose, straight…
Required for the DXC2 Extruder
For use with the DXC2 Extruder Upgrade Requires installation of original magnets
Release Client! This is the final update unless users come across any issues. If you have one working, you do not need to upgrade. I have run approximately 100 hrs of filament through it at this point in this configuration. Feed tube…
This is a custom-designed toolhead cover modification specifically engineered for the Creality K2 , K2 Pro , and K2 Plus . It allows for the seamless integration of the high-performance Phaetus DXC2 extruder . https://dxc2.phaetus.com/…
DXC01 night stand - side table Interested in more? https://linktr.ee/smackmax This 3D printed furniture piece is a compact, functional side table with a bold geometric form—perfect as a nightstand, plant stand, or sofa-side accessory.…
print it upside down, for the most important surface of the hot end interface, the horizontal top surface. PPA-cf material was my choice for best stiffness and heat resistance. You will need to modify your front and back covers. You will…
Creality K2 DXC extruder upper mount with ptfe
No print support! https://www.phaetus.com/en-us/products/dxc-extruder The motor is not included as it's meant to be a drop in replacement for the Creality K1 extruder. Needs to be 12t gear (the common motor for Sherpa and Orbiter uses…
Este mod foi desenvolvido para permitir o uso da extrusora DXC da Creality K1 em conjunto com o kit CFS , algo que não é suportado no projeto original de fábrica 🚫➡✅. Além da compatibilidade com o CFS, o projeto inclui uma lâmina de corte…
Just a quick bodge together of the shroud by Chkathome for the custom "reversed" PCB mount and the factory Phaetus shroud for use with the DXC2 extruder. All the instructions for the the original applies here. My CAD skills are shocking…
DXC2 Extruder Has it's own files to print from instructions but after printing and installing the extruder housing hits the chain mount when purging/extruding. After multiple tests and prints and failed attempts + Creality support not…
Bowden clip that is easy to install and remove Important: 0.2mm layer height
This is a replacement carriage for the Ender 5 Max to use the DXC extruder. It works with the stock hotend or the Creality Hi or K2 hotend upgrade. I am currently using this with a Creality Hi hotend. I printed this in ABS and it seems to…
This washer allows the DXC Extrtuder to be used on an original Creality K1. The extruder makes the motor too high and further back so it colliders with the mount. I would recommend printing a Chain Raiser for the print head as well. Extra…
📐 Description This is a custom cable mount designed for the Creality K1C when used with a DXC Extruder mod. The DXC extruder raises the extruder motor significantly, which causes collisions with the stock cable mount — this part solves…
Enlarged front tire for my Worx Landroid mower to stop in sinking and getting stuck in my thick uneven grass. Remixed from similar tire for Landxcape mower that it may also fit. Printed in TPU with 10% Gyroid infill. I found this nice and…
I made this cage because I noticed that the DXC2/K2 extruder have the same reduction ratio as the Ender 5 Max, So it did not require any changes to the printer config file. You need to unplug and remove the PCB off the back of the K2…
This is a DXC extruder mount for the Stealthburner with UHF Rapido hotend and holes for SB 2209 canbus. Instructions and length of screws are written on the attached images or as below : 40mm bowden tube Two 35mm M3 SHCS screw Three 5mm…
passend für Landxcape und Worx Rasenmäherroboter. größer Teller Durchmesser als original und befestigungen für 6 Messer. erforderliches Zubehör : -M4 Mutter - optional Ø7 Zentrierringe
Guide to run the PTFE from the back of the printer to the side, to feed the filament through after removing my stock run-out sensor and the stock extruder, replaced by the DXC extruder that has the run-out sensor integrated.
This is a remix of the new riser by Phaetus and the "bearing" component by @user8738280062.The riser cover has been redesigned to avoid interfering with the cable chain in the nozzle purge area.
The part was designed in SolveSpace
Lid riser for the original creality k1 3d printer. Idealy petg. Clears the DXC extruder, fits with my other bowden tude holder link. Requires supports, idealy print in PETG.
When my compressor arrived, this isolator was broken out of the box. I did not see that immediately and only much later realized this. I looked online but could not find the correct part, so I used the broken parts to reconstruct this.…
After 2 failed stock hotends and countless extruder clogs, then trying the DXC with K2 plus and not being happy with the rigidity I decided to go rogue and make my own. DXC extruder, TZ-V6 hotend. Noctua 4010 for heatbreak cooling and one…
Here's a second thumb steer iteration. The 3MF has the inner body set as a modifier with zero top/bottom and honeycomb infill. Adjust as you like! I think I over did the adjustments from the first version. The geometry is ~ 35° downward…
***FYI If you have downloaded this cage before 10/6/26 I had the wrong models uploaded, and the current ones are correct. The only difference is the front cover pins are about 1.2 mm too far back and may case the cover to not sit right.…
Printing Settings : Layer Height: 0.2mm Nozzle: 0.4mm Perimeters: 3 Top/Bottom Layer: 3-4 Infill: 30% Support: Maybe needed Material: PETG/ABS/ASA Assembly for the MantisDuct-Remix v1 : 1) 5015 24v Blower - 2pcs 2) 3010 24v Fan - 1pcs 3)…
Designed this with the mounting holes in mind for a direct drive extruder design using the phaetus DXC extruder. I'd recommend using ABS and printing this with 50% gyroid infill with 3 walls.
An adapter to mount the DXC to the mailbox toolhead
Can fit like three USB items and MicroSD card and/or smaller MicroSDXC card. There's tons of really tight models, but I specifically wanted model that fits like that absurdly big TP-Link Wifi dongle and yet it can still hold those memory…
Not too bad for a first iteration. I'm changing the geometry on the next one, but posting this here in case it's useful or inspiring for someone else! I made it two bodies with the intention of exposed infill. Unfortunately I worked over…
This is a replacement carriage for the Ender 5 Max to use the DXC extruder. It works with the stock hotend or the Creality Hi or K2 hotend upgrade. I am currently using this with a Creality Hi hotend. I printed this in ABS and it seems to…
print it upside down, for the most important surface of the hot end interface, the horizontal top surface. PPA-cf material was my choice for best stiffness and heat resistance. You will need to modify your front and back covers. You will…
An adapter to mount the DXC to the mailbox toolhead
For use with the DXC2 Extruder Upgrade Requires installation of original magnets
*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. /////UPDATE V4 - 23.04.2026 ////CHANGES BASED ON V3 The base of the arm was raised by 3 mm. The internal geometry of the arm…
This really cool Extruder is from the D3vil Design Team I want to use it for another DIY build, so I made a mock-up before the D3vil team releases the official stp file. It should be accurate enough.
*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. /////UPDATE V4 - 23.04.2026 ////CHANGES BASED ON V3 The base of the arm was raised by 3 mm. The internal geometry of the arm…
![CREALITY K2PLUS - CHAIN RISER [ORIGINAL AND DXC2 EXTRUDER]](https://media.printables.com/media/prints/60a6c12f-0cb5-4f1e-a741-d72f66d654ea/images/12755804_9e98d822-26ce-4b9f-96e2-26277dcdc0b8_78c358ec-c365-44c9-9728-635faf430763/k2_plus_chain_riser_1jpg.jpg)
