171 modeli
What i changed ? antena holes are moved 1mm higher display hole is smaller side button is better protected pre-marked hole for power LED and antenna LED so if you print out of the translucent material, you will see the antenna red and the…
This is a cover for the Eachine PRO58 diversity module. The module goes into the cover, then the cover into the goggles. It has clips which will prevent it from falling out of your fatsharks while you fly. No tape needed! I designed this…
case for the eachine ev800d fpv goggles, the original model bothered me because it was very ugly, I decided to model a base for the goggles that has an improved look, reuses the straps from the original goggles, you just need to put some…
This is a drone frame for the Eachine E010 Mini. Be aware that this frame makes the drone way more harder to control (and a lot faster). So it may not be suited for beginners. It also doesn't have prop guards, so you may want to be more…
***Warning: I need to redesign 2 and 9 Blade Prop, please print 3 and 5 only in the meantime.*** (2,3,5,9) Blade Design 3 Blade Propellers are tested and perform very good. 5+9 just 4 fun. I Print with: ASA max 50mm/s 256°C/104°C 0.12mm…
To assemble the stand all you need is 1 x M3x20 screw and nut. You can find this great 7' Eachine monitor here: https://bit.ly/39uZf9U Other sizes and types of FPV monitors: https://bit.ly/3aqM2A9
Excuse the poor geometry, I went more for it working than for looks. To get the lens out of the goggles you need to unscrew these screws and essentially rip it apart (it shouldn't damage it) You might need to remove the fabric You can…
Ahoj, toto je moje diplomová práce z roku 2020. Rád bych se s vámi o ní podělil, jelikož se jedná o plně funkční model. Jedná se o kopii Eachine Wizard x220 s drobnými úpravami (zpěvnění ramen atp. kvůli tisku z plastu). Šroubky jsou…
If you need reading glasses and have one of those FPV goggles, you know the pain of only seeing a blurred image on the screen 😓 This little clip let's you use the lenses from one of those cheap magnifying glasses:…
I needed a reduction for my EV800D to a mobile phone, and there it is. As any owner of these glasses know, the display can be removed and the second part is loupe, so the idea was to use it not just for self builded drones but also for…
I wanted to design a frame for the Eachine E010 style drones that is very light but can withstand crashes. So here it is in 6mm and 7mm motor variations. I play a lot with my E010 built into this frame and I crash a lot but the frame…
A small Case for the Eachine PRO58 Diversity Receiver for my Fatshark Attitude V2. Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Supports: No Resolution: 0.20 Infill: 20% Filament:…
Easily detachable from the googles - snap fit No screws/nuts required I printed in PETG, 20% grid infill, 0.3 mm layer height, 3 perimeters minimum. No supports required.
a little remix to fit the screws better and also tidy up the last layers of the rotator shields Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Category: R/C Vehicles
I bought the Eachine EV100 FPV goggles as my first goggles but they really didn't fit my big head, no matter how I adjusted the PID it would still blur the outside edges. I found the replacement shell from Lichy but honestly nothing fit…
Print in PETG Props need to be trimmed a litte bit
Offset mount for 30x30mm so the VTX sits in the middle. Two models included. Thin platform and thick.
Create a standalone FPV Video Receiver, using an Eachine Pro58 Fatshark receiver module and a DJI Goggle analog adapter, with this printable case. You will need: Eachine Pro58 Module Analog Fat Shark Receiver Module Adapter V2 for DJI…
Hi, this is my original project for Eachine Wizzard X220 V2 (but it will also suit to many other 5" quad drones). It's size is designed for typical antennas and Beitian GPS BN-880Q with compass. Print it in slow motion with 100% infill…
Helps to protect FPV goggle lenses. Designed to be compatible even when you use diopter lenses. Print instructions Best material is PETG, because it's has to be flexible a little bit. Fell free to trim-sand top "bumps" which fit into…
The original part has broken twice for me now over two different cars. The only part to fail other than the wing, but the PETG replacement holds up well. Replace the original by unscrewing it, this is easier if you remove the two screws…
Support caméra TX06 Eachine avec attache GoPro Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Prusament PETG / PLA / FLEX Category: Camera
Mount for the Eachine TX04 AIO camera for the Inductrix / Tiny Whoop frames. I'm using it on a cockroach frame from NewBeeDrone. Use a bit of hot glue to keep the camera in. .f3d file is on Thingiverse because PrusaPrinters doesn't…
EACHINE Wizard X220 Feet (16mm) Drone skid plate/feet, designed for my EACHINE Wizard X220. I used M3x10mm Titanium screws with these feet, they go through the feet, frame and motor protectors to screw into the motor. The motor screw…
I present my Eachine Tyro 79 Part collection: Battery Saver, Cameramount, a cute sharkfin, plate on the back and antenna. All parts were made with PLA and high infills. Depends on your flight style;-)
The Eachine TX02/TX02 Pro cameras are an ALL-in-one solution for your FPV needs. Just plug power. However some setups need the bigger format, so this adapter TX02 Pro discontinued but this might fit TX03:…
Zweiteilige Halterung zum Befestigen eines Walksnail Avatar VRX an einer Eachine EV300D FPV Brille. Da diese Brille keine Möglichkeit der schraubbaren Befestigung bietet muss die Grundplatte mit dem beiligenden doppelseitigen Klebeband an…
Slightly changed the design of the visor in comparison with the original. Print Settings Printer: any FDM printer Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: any CoPET/PETG
Arm for Eachine Novice 4 Bras pour Eachine Novice 4 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.12 Infill: 100% Filament: NO NAME PETG Category: Hobby
I want to use a True-D V4 receiver on my Sky04X, so I decided to try to fit it. The board of True-D needs to be a little sanded to fit perfectly inside the bay, but it fits. This cover uses the original bolts and fits from True-D v4.…
Probably best printed in tpu or some sort of wear resistant filament
This is a model of the hood for the Eachine E013 or like frames with a camera. I have added the 3rd hole on the front right of the hood for the receiver antenna to come through. This hole allows for a range boost on the drone. Final…
Relocates the antenna to a much more crash resistant location. Print in TPU, PETG or ABS
This is a mount for the eachine tx02 camera ( https://goo.gl/4is3j3 ), to mount it on a common tinywhoop-frame. One part is without a tilt, the other one has a 10 degree tilted cam-holder. I also added the Sketchup-files, so that you can…
Not for X220s. If you are interested in a version for the X220s you can contact me. I attached the gps module with 3m double-sided adhesive tape. but you can also use a cable tie (2.5mm). Layer height 0.2 - 0.32 TPU 95A
This is a box for the cute eachine tx01 and I presume it wil fit to tx02 which is the same product but a 250mw radio. I had to sand the original size a lot to make it fit, but if you scale it 0,02 it fits almost out of the printer - the…
I made a cockpit mount for an all in one FPV camera (GOQOTOMO GD02 on Amazon) for the Eachine p40 RC plane. You'll need to cut off the old foam cockpit and screw the board into the bottom of this printed one. You can power the camera from…
Print in TPU or PETG for best protection
A camera mount designed for Eachine x220 v2 fpv drone
A simple case to carry an Eachine UK65 drone. The top bottom retaining ribs are a bit oversize so they can be filed down to create a perfect fit. Print instructions Category: R/C Vehicles Summary A simple case to carry an Eachine UK65…
Designed for a BN-220 GPS.Need new Screws M3 x 16mm
This is a mod for Eachine VRD2 Pro goggles that lets you use electronics as a separate screen without damaging the original case. Use an M5 insert on the base to attach to a tripod. Print Settings Printer: Delta Rafts: No Supports: Yes…
Print on its side for strength, supports will be needed. Go for a shock-resistant filament like PETG and up the wall count. Made for Eachine EC30 but to the best of my knowledge, it will also fit HBX 16889 shocks. Matching shock foot can…
Sliding lid box for FPV helmet storage Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Any PETG Notes: 2 contour thick wall (for lightness)
Just a part to convert your ugliest hat into a fpv goggle device!! Surprisingly comfortable compared to the original straps and easy to lock and unlock your goggles. Material: 3 x M3x10 bolts 1 x M3x25 bolt for the lock knob (optional) 3…
based on the original model i made a version that doesnt need support by removing the bottom holder part. Its designed to fit very snug so it doesnt rattle around. PETG recommended, as PLA is to brittle and will likely break when trying…
Print in TPU or PETG, replaces the LEDs
Full Protection, 10, 15, 20 and 25deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws
TPU Accessory mounts for the Eachine LAL3 frame Includes: Arm bumpers Express LRS antenna mount - Fits the Happymodel EP1 antenna VTX antenna mount
Die Originalen Füße von den waren scheiße, hab die vom Green Hornet nachgemacht.
Eachine Tyro69 (105mm) tiny whoop improvements: Camera replacement (any micro camera) protection canopy (usefull for crashflip) Foxeer Lollipop 3 UFL VTX antenna Buzzer added Landing pad and battery protection. Diversity RX antennas…
I tested only on eachine TX02, but should fit on the other models also. Print it in TPU or other soft materials. you can prind the base in PLA or ABS. you can chose between adjustable ancgle base and fixed angle base. Category: DIY
I apologize for the scrunched pictures, I guess thingiverse does not like 16:9 pictures. I modified one of my favorite "whoop" canopies that I designed to hold the Eachine Nano VTX in the top. Mount the VTX with the antenna and button…
Eachine e160 / JJRC M03 main gear. Includes a spacer to be installed between the gear and the bearing. It is recommended to print it with a 0.2mm nozzle or inferior. Adjust layer height accordingly i used 0.10mm. The speed must be kept…
Compared to the original I've just made the model 12mm shorter, so it would fit my headset. The 3mf file is sliced into multiple parts, just scale the middle part and move the SMA connectors into place. Fits an SMA distance of 78.8mm.…
TPU Accessories for the Eachine Shadow Fiend Includes: Arm bumpers ExpressLRS antenna mount - Fits the Happymodel EP1 antenna VTX antenna mount GPS mount - Fits 18x18mm GPS like M8N, BN-180
Holder for LiPo Battery. Use 2 straps for mounting the battery. Update: Added a TPU version, which has thicker arms to hold the strap.
This is an alternative camera & vtx mount for the Eachine Tyro69 fpv race drone. It allows to mount a proper nano fpv camera and a more powerful vtx. I've attached two versions, one with a hole in the back to increase airflow in case the…
It's pretty tight on Wizard x220,but fits. I attached a .blend file so feel free to widen it a bit if needed. You might need a brim, but I did it without and worked great on Creality Glass Bed. My setup: 0.4mm nozzle, 0.2mm layer height,…
Holder for Eachine TX805 VTX for the Source One V5 frame. In fact, you can use this for any frame with 20x20mm screw spacing. The screws I used to attach this to the drone were m3x7/8mm. Designed in Fusion360
This is an alternate frame design for the Eachine BAT QX105 quadcopter. The original carbon fiber frame is quite fragile so creating a backup was a top priority for me after I bought one. As expected the carbon frame broke on the second…
EACHINE Wizard X220 Micro Camera Adapter. I've designed a micro camera adapter for my EACHINE Wizard X220, it currently holds a Runcam Eagle Micro but it should hold other micro-cameras as well. It attaches to the front 2 M3 holes of the…
Print in TPU or PETG to provide some shock resistance.
A simple case to carry the Lizard 95 (without prop guards) along with 4 lipos (Turnigy 850mah) Print instructions Category: R/C Vehicles Summary A simple case to carry the Lizard 95 (without prop guards) along with 4 lipos (Turnigy…
FPV_cabin_BETA1400_holder_for_CAM_EachineTX03
This blind plug covers holes after fake antennas removed from Eachine E58 remote control. You can also replace one fake antenna with real 2.4 GHz antenna from old WiFi router. Print Settings Rafts: No Supports: No Resolution: 0.1mm…
Tools to dismantle the propellers on a Eachine 250 FPV Racer Post-Printing Category: R/C Vehicles
This is adapter to mount additional lens from model EV800DM to EV800D You have to buy: Eachine Ev800dm Goggles - Zoom Screen Mannifier You have to print 2 pices of adapter Print wih 0% fill and brim 3-5mm without support Next open goggle…
With this case you can mount your Uruav V3 module together with an Eachine Pro58 VRX and a Runcam mini DVR for recording your flight footage. Print with PETG or PLA with 0.15 or lower layer height for best results. Supports are only…
I'm using the bad shipped with the goggles to store them in a bigger bag. The only issue with it is that it could turn the power on by pressing the button for long enough, due to another item being in the same storage. I made this very…
This is the body of the Eachine Sphere Link IMX415 camera in case you break it (just like I did). Might fit the IMX335 version but I don't have one at hand so try hat your own risk. Took the measurements from a broken camera body and did…
This is a case with cover to hold up to ten 1S 3.7V Lipos (incl. Velcro) as used on the Eachine QX95 micro FPV quad or similar micros. The bottom of the box is split so you can print one green and the other red, powerchord on the red side…
25mm mounting for an eachine nano VTX. three versions.
This performs two tasks: Protect your Eachine EV800DM goggles from accidentally turning on in your bag because something pressed the power button. Protect your SMA Antenna connectors from dust, debris & deformation. This is a simple .4mm…
A simple, lightweight, snug snap-fit guard for arms and motors for Eachine Wizard X220HV. Designed to be very easy to print with TPU plastic. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…
English: Battery holder for a converted H8 Mini fpv drone with carbon frame. Is clipped into the carbon frame from below (additionally glued). Replaces the rubber band, battery is easier to swap . Suitable for the 260mAh batteries and…
Simple lightweight clip to mount the Eachine EV100 Micro AV Recorder to a 19mm strap of the Eachine EV100 FPV goggles. Print Settings Printer: PrintBucket 500 Rafts: No Supports: No Resolution: 0,2 mm Infill: 100 % Notes: Printed with…
Servo Arm for Eachine e160 and JJRC M03. 0.3mm nozzle or smaller recommended. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Filament: Tucab PETG Category: Hobby
I created this mount for the VTX and RX antennas because the propellers of the drone go to cut the antennas with this bracket the antennas will stay perfectly in their position without risking breaking anything
Glasses case for the Eachine EV800D. Everything is made nicely, nothing rattles around. The only thing I’d suggest is ad
This is a prop guard for mjx bugs 3 mini/eachine ex2 mini. Its flat not like the original, but its easier to print this form, and I think it works. Print Settings Printer: prusa i3 rework 1.5 reworked by hygy Supports: No Resolution: 0.16…
Antenna Boom Holder for the Eachine 250 FPV Quad. Designed to fix 2 2.4GHz antennas (e.g. Jeti Duplex RSAT) at the tail of the quadcopter., using 2 pieces of bowden tube as guiding for the antenna ends. Drill the 2 fixing holes to 2.4mm…
30 degree mount for camera
One-piece adapter for moneagle screen to gopro mount. Tested with PLA, works great with any tx16s gopro mount or other gopro accesssories. Category: R/C Vehicles
This is a camera + VTX holder and protector for the Eachine E010S. I couldn't find appropriated version so I started again from the Oscar Liang version made for E010 (the Camera + VTX module is much smaller on E010S). I have the E010S -…
Full Protection, about 30 grams. 10, 20 and 30deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws Update 16/4/20 added 15deg Version
Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)
Print with strong material. No PLA. PET and Nylon worked best. Design is made for Lizard95 with VTX02 VTX03 and a Runcam Micro (19mm or similar micro cam) Category: R/C Vehicles
The original Eachine EC30/B motor mount supports 14t or 16t pinion gears. This model gives more pinion gear options by adjusting the top screw left/right to find that perfect gear mesh! Tested OK with 12t - 17t pinion gears I suggest…
Eachine E010 Super Mini Light AIO camera mount 20 deg Category: R/C Vehicles
Eachine E010 battery adapter i use elastic sbs filament Category: R/C Vehicles
The rear end for Eachine Wizard x220 upgraded with TBS Unify and stump antenna. Cut off the end of the top plate is required. Print instructions Printed in XT-CF20 by Collorfabb with installed hardener nozzle E3D 0.4.
This little customizable angled case perfectly fits the Eachine TX03 AIO camera. You may have to slightly change some parameters in the OpenSCAD file to match your printer tolerances. The cut on the back-right-side is for the video-in and…
This tiny box protects your eachine E010S and also stores some batteries, charger and tools. I added some rubber dampers at the bottom of the middle part of the case. Have fun :-) Update: I added another cover (E010S_o2.stl) that gives…
mounts antenna up and away from blades printed with nylon but should work with any flexible filament
Also compatible with Udirc 1603 Tested on my own eachine eat 15 car. After over 30 hrs of usage it is still durable(pla+). Hole horizontal expansion: 0.0 (for my printer. It depends on your 3d printer)
I picked up a Realacc RX5808 Pro Plus OSD Receiver and needed a cover for my Eachine Ev200D goggles so I designed one. I printed it at 0.15mm layer height with support. Infill does not matter. The receiver will be a real tight fit if you…
Just prop guard for tiny qx80. Print Settings Printer: GATE 3Novatica Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: PLA Printed... Category: R/C Vehicles
TPU for flexible, shock-absorbing properties or PETG for a stiffer assembly.
the holes may be slightly off, I handled it by placing the heated inserts in a way that mitigates that.
