5113 modeli
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ALERT: If you use letter ‘g’ then change $fn=32 to $fn=15 This is a custom name tag / key ring charm generator using OpenSCAD with Barbie theme. These tags can be used for bags, phone charms, luggages, key chains, etc. Steps to Create a…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Wydruk około 3,93 €–4,81 € nettoWstępna wycena jednego wariantu
Prints Parameters : Layer Height : 0.2mm / 200um Perimeters : 6 (recommended) ~ Initially the lock may seem to be a little tight but with over a period of time and use, they will be lose enough! ~ ^This has been fixed now! Left the…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
I have remixed my previous model based on request to have taller handle while the bottom part is the same, so here it is.. Info: 🟣 the edge is round → so the edge is longer → you can use it for a longer time then other spatula types…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
🚀 This is NOT a typical moon lamp 👉 You don’t just see the Moon — you feel it. 🌕 Moon Lamp – High-Relief NASA Edition (Ultra-Detailed Terrain - also visible without light ) with Mechanical Dimmer 🤯 Most 3D printed moon lamps rely on…
Wydruk około 25,53 €–31,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero. This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :) Remixed Things I made few…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
If you like my design, I really appreciate if you can consider a coffee ☕ for me! ( LINK ) Version 2 released! Snaps on sides, slightly easier to open. Overview A business card stand for an exhibition booth or an event table. It folds and…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We all know how bad it is: You're traveling and suddendly notice that you have forgotten your Chess board and pieces. The vacation is ruined. This credit card sized Emergency Chess game solves this problem once and for all! You can always…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 24,55 €–30,01 € nettoWstępna wycena jednego wariantu
This is the insert and organiser for the war game The War of the Ring Second edition. ( https://www.aresgames.eu/games/war-of-the-ring-line/war-of-the-ring-second-edition ) With this insert I wanted to solve two issues: Ability to sleeve…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
Meditating Yoda
Wydruk około 5,51 €–6,74 € nettoWstępna wycena jednego wariantu
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
I see that the first edition is liked so I prepared 2 edition .I mostly give m3f files, I will try to make models in stl files as well, but I can't merge some parts. Warning! Parts knob 3,4,5 have been updated and fixed, If you have a…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on ISO/IEC 7810 - ID-1 for perfect fit in your credit card wallet. Thickness 4mm.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
I recently saw someone carrying around a similar wallet and thought, "Could I 3d print that?" The answer is yes! Here is a credit card wallet with a low poly aesthetic. It also features a lever that will lift the cards for easy access. It…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
a credit card cuttlery piece
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
GoPro mount to attach the action camera to all possible surfaces with the help of double-sided adhesive tape. In my case to a fullface helmet. There is a hole where the hexagon screw can be easily attached. I would be very happy about any…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Overview A rugged and reliable ammo storage box designed for firearm enthusiasts, reloaders, and range goers. Holding up to 81 rounds of 9mm, this compact case fits easily inside a range bag, making it a great alternative to flimsy…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Adds an Apple AirTag and space for cash, without adding much in thickness (4mm for the AirTag, nothing for the cash). This remix adds space for an AirTag on the top plate, uses some of the thickness of the bottom plate to add space to…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
A "wallet" for a single credit card, closed in the rear, with a hole to take out the card and a nice round hole in the front. I also uploaded the gcode for the MINI with organic supports and casual junctions. I think is good and hard and…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Evolution from model https://www.printables.com/model/464458-prusa-mk4-filament-guide with new original design. Improvements - Guide is placed higher up allowing for printing full height of the printer. - All parts now snap together, no…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Your favorite fractal sculpture! now halved, with a long flat base so it can be a bookend! Please consider supporting my hobby. You will make my day! (excuse my sloppy Photoshop, I haven't been able to print it yet) This was generated to…
Wydruk około 14,05 €–17,18 € nettoWstępna wycena jednego wariantu
Hello, I have for you a Minimalist Beer Crate for RC car expedition 1:10, 1:12. The part is a crate for 20 and 12 beers, including beers. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu
Steps to Create a Custom Keychain/Name Tag: Download and install OpenSCAD from the official website here . Extract the contents of the downloaded OpenSCAD zip file into a folder of your choice. Ensure that the "Starjedi.ttf" font file is…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Overlapping hearts with text in the interior. Editable with “Edit text” function in PrusaSlicer. GCODE for a Ender3-PRO without supports and without infill. I made it with Jayo3D red PLA.
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
The Volkswagen ID.4 has two credit card slots on top of the center console. These two slots are ideal for attaching a phone mount. The design has two slots in the stand, accordingly, where two printed cards can be inserted appropriately.…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Impress your friends and family with your new 6" Square Napkin Holder - Voronoi Edition
Wydruk około 11,53 €–14,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a special winter edition of the shopping cart coins. This is your ticket to use your shopping cart. You can keep the chip on your keychain, inside your pocket or in your car :) Or even better, you can hang the chips on your…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Accessories for the VW T3 camper model. (Universal trailer model for future projects) used screws: M3x20mm (12x) red M3x6mm (3x) blue Keep the orientation of the parts as original STL file. Printer setup: Nozzle diameter 0,4 10% infill…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a base that has an attached sign on the front of the base. You can add the name of the figure or model that you are displaying. I have included the files in various versions. Fully customizable sign with editable text or you will…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
BrassEnds: Locked In. Ready to Thread. Bullet-inspired beads designed for hoodies, bags, gear, and creative projects. Modeled after 9mm FMJ rounds, these rugged little details add tactical style and functional flair to any corded…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wallet with eject mechanism. Credit card sized. Includes optional coin and paper money holder. New in second edition sturdier design better fitting lid and longer lid screw more rounded edges fixed fitting issue with end cover Print…
Wydruk około 3,71 €–4,54 € nettoWstępna wycena jednego wariantu
English : Correction : access to top usb port cleared. The reworked optimized last version of my first rotativ Speederpad mount. Printed it with Black PLA+. Layer height : 0.2 ; Width: 0.4 Walls : 2 ; Wall ordering : From outside inwards…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
LXO's Lowest poly The Thinker is one of my favorite models and has become somewhat of an icon for me. I've printed dozens of them, it is essentially my Benchy . Since I love it so much, and the original model is released as mesh only, I…
Wydruk około 2,02 €–2,46 € nettoWstępna wycena jednego wariantu
Here's my version of the Galactic Credit Standard. Category: Props
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Bored of the stock knob from your original Prusa printer? This one is for you! A round, spiky knob that provides a better grip, and a concave part for easier pushing. Also plug & play. Use a small lever to remove the old one, snap in the…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
I liked the design I'm remixing. I decided to add a small compartment for a few bills, coins or flash memory cards. The drawer is very tight and there is no way to accidentally open it. The credit card compartment can hold 3 or 4 cards…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE (2026/01/23) - Added an STL model that has been scaled 200% larger named Conversation-Heart-Candy-Romantic-2xScale.stl. This appears to be especially helpful with some printers and the Orca Slicer. This is the first in a possible…
Wydruk około 9,12 €–11,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
This is a nice card organiser for Credit, Membership or Business Cards - and everything smaller. It's a modified version of another Credit Card Organiser I designed: Credit Card Organiser von Kilberisch | Kostenloses STL-Modell…
Wydruk około 3,86 €–4,72 € nettoWstępna wycena jednego wariantu
TOYOTA CUSTOM 4WD SHIFT LEVER (2.0) ……………………………….. ERGONOMIC Curved design hooks to the hand, easier to handle compared to the simple cylindrical shape. OEM INSCRIPTION Directions for shifting gears on top, just like the factory.…
Wydruk około 5,15 €–6,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A thicker version of my previous phone stand for thicker covers.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
After using this for sometime, I have added a hole to the side and screwed it place with a wood screw . Updated Increase the walls of the shaft to increase strength. Redone the tapering to print better Settings Supports under the crossed…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
Overview: BrassEnds are bullet-inspired drawstring beads that add rugged EDC style to your everyday carry, apparel, and projects. The .45 ACP Edition takes things up a notch—bigger, bolder, and ready for action. This version includes two…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Insert pro hru Karak - 1. vydání (obdélníková krabice - rozměr insertu je 314 x 224,5 x 67 mm). Tato verze insertu pojme věž na dlaždice, 16 kusů mřížek a veškerá vydaná rozšíření kromě 3D figurek. Mé inserty mají několik verzí, které…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't want to use your fingernails or scraper to pick the corners of your first layer calibration print off your pristine $35 steel sheet? I added a removal peg that solves this little annoyance. When you are done then just roll the peg…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This credit card size radius gauge fits is small and fits to wallet or pocket. From 1mm to 18 radius and some basic hexagons (8,10,13,17,19). Simple design, simple use. I used ASA, but every material is possible, not neccesary…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🎬 Video: Watch how this festive 3D model takes shape layer by layer: https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Description: This low-poly Christmas model captures the charm of the holidays with clean geometric…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
During box or square breathing, you breathe in for the count of 4, hold for 4, breathe out for 4, hold for 4, repeat. This little tool is a tactile guide for centering your mind while you do the box breathing. Each side has a different…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
CZ: Samosvorné víčko pro jogurt (Lidl Pilos). I když z mé strany byla snaha vytvořit co nejvíce univerzální model, nesedí na úplně každý kelímek (stejný výrobek, stejná značka). Doporučuji proto model vytisknout ve více velikostech…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An easy to print credit card wallet. It has a spring mechanism to prevent credit cards from falling out, it fits about 3-4 credit cards. If you use the pre-sliced gcode, you will need to break out the supports using a screwdriver or…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
First thing, many thanks to testudor for the original kit, this mod is a life saver. To be clear first, you can mount any 92 mm fan to the original frame, as long you can make it work. But the frame of the be quiet fans were in the way of…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena jednego wariantu
CZ: Editovatelný dil pro záchodové prkénko, který má funkci nejen náhradního dílu za původní podložky, ale funguje i jako stabilizační prvek. Tiskové parametry: Podpěry : bez podpěr. Filament : PETG, nebo PLA. Výška vrstvy : 0,15 - 0,2…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Insert pro hru Karak - 1. vydání (obdélníková krabice - rozměr insertu je 314 x 224,5 x 67 mm). Tato verze insertu pojme veškerá vydaná rozšíření, bonusový obsah a 16 kusů mřížek. Mé inserty mají několik verzí, které obsahují některé…
Wydruk około 4,19 €–5,13 € nettoWstępna wycena jednego wariantu
Prints at regular scale but I recommend 150% for full detail. See below I tried to squeeze in all the things I saw in the show. Did you notice the wheel on the right?
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Geometric planter and pot-great for all scenarios. May be used as a planter, storage box, etc. Designed in Fusion360 No supports. Brim/Rafts not needed. The thickness is pretty fitting; let me know if you need it adjusted. gcode is a…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Introducing the sleek and compact Credit Card-sized Ice Scraper – your ultimate winter companion for effortless windshield maintenance. This ingeniously designed ice scraper combines portability with efficiency, ensuring that you're…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a storage/travel case for the Kindle Oasis 9th Ed model CW24Wi. The kindle is held in place by magnets. I like the slim form factor of the caseless Kindle, so this case is designed to keep the screen safe, while being easily…
Wydruk około 4,49 €–5,49 € nettoWstępna wycena jednego wariantu
Update Created three new versions! Widened Eyelet 3.5mm inner dimension instead of 3mm as my keyring was not able to rotate freely. Keyring Edition - Double Sided To allow ID Cards to be visible from both sides Classic - Double Sided…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed this model from the excellent design by Kai. I have included the hooks from the Thingiverse design by CSD_Salzburg for convenience. I like the design and used it for some time, but I needed something that could fit a bigger…
Wydruk około 5,06 €–6,19 € nettoWstępna wycena jednego wariantu
card shape for use in example photos of credit card holders, so you don't have to censor your card in post-processing. available in 2 thicknesses: accurate thickness (is easy to break) double thickness (is a bit harder to break but please…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Our son got invited to a space themed birthday party, so we made this rocket keyring with the kid's name on it as a little present. There are two versions: single and multi-color. To edit the name you need this font which is free for…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Canada Soccer – Les Rouges National Team Crest (Bas-Relief Edition) : World Cup 2026
Wydruk około 9,24 €–11,30 € nettoWstępna wycena jednego wariantu
An editable credit/debit card design
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Meine Freundin und ich haben schon länger nach einer Möglichkeit gesucht, Einkaufchips und ein paar Münzen in unsere Kreditkartenetuis mit unterzubringen. Nun habe ich einfach ein kleines Fach in Kreditkartenformat entworfen, wo alle…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Added an alternative layout under STL … PhoneStandHeartB Added an alternative layout under STL … PhoneStandHeartC - just a minor change - the hearts above the flaps is higher up and at some angle A nice present/gift to someone that you…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
I had some spare Unifi equipment laying around that I decided to build a small Unifi stack with to give to a relative. Given the USG's Vintage status I decided to call it a Dream Shelf Vintage edition. It has enough space to hold a Unifi…
Wydruk około 14,56 €–17,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meditator and Dragon This model kind of sucks. My Trusty Design Computer bit the dust. Working on a m4 Mac mini and had to go through the entire rebuilding my tool chain. I had not realized how much I had augmented blender over the past 4…
Wydruk około 19,75 €–24,14 € nettoWstępna wycena jednego wariantu
I find out that Jumbo sells Acrylic foil that can be used to create a enclosure for the prusa MK3-4. If you don't want to cut them ( because is not easy cut the acrylic without breaking it), I made this version of the enclosure that use a…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
Hey, habe eine Hülle für Kredit Karten gemacht gedruckt mit 15% infill 0,4 Nozzle und 0,20 Structural, hab spass beim drucken Hey, I made a cover for credit cards printed with 15% infill 0.4 Nozzle and 0.20 Structural, have fun printing
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
We were so happy how the penholder for our friends (the 1860 version) came out and how useful it is to organize stuff, that I created one for us, too. For us, I chose a more subtle context and used a dragonfly for the front. It supports…
Wydruk około 8,14 €–9,95 € nettoWstępna wycena jednego wariantu
This tag is for you to see what the filament really looks like.
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Device that holds on to your smartphone while charging. Low support on one side for easy access to yout phone while charging. If you prefer acces on the left side it can easily be mirrored in the slicer. Also features two different size…
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
ClipCharge – RemixForge Edition Load Fast. Clip On. Move Out. ClipCharge turns a trusted 9mm speed loader design into a battle-ready EDC essential. This RemixForge edition adds a rear-mounted hook for keyrings, carabiners, or MOLLE loops,…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Pop-up credit card wallet spreader with Tile Slim holder
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is v3.1 of the model, the UGreen Nexode Batterybank Edition. Superior ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The 2022 remake of the classic Scotland Yard is called the Sherlock Holmes Edition and is a very nice game, the updated game mechanics add a lot of fun. Unfortunately the pawns and tickets were just thrown in ziplock bags, luckily the box…
Wydruk około 9,15 €–11,18 € nettoWstępna wycena jednego wariantu
Continuing on from my “Wall Art Line Drawing Print”, here's another design I drew made into a 3d printed art piece. Please see the read me file for printing specs. Please post your make with the “Post A Make” button (below the “DOWNLOAD”…
Wydruk około 6,64 €–8,11 € nettoWstępna wycena jednego wariantu
This is a set of screws which fits Sonic_2_1's Prusament Masterspool Final Edition . They are just their screws but the middle bit is removed to make room for the bars of the Prusa spool holder that comes with the MK3/S/+. The ones from…
Wydruk około 3,61 €–4,42 € nettoWstępna wycena jednego wariantu
DriftScoop – Paws Edition Part of the Drift Series Scoop. Clip. Go. The DriftScoop – Paws Edition brings pet personality to the rugged utility of the original DriftScoop. With the same travel-ready design and volume-tested functionality,…
Wydruk około 4,24 €–5,19 € nettoWstępna wycena jednego wariantu
For our latest space themed children's birthday party we bought some painter's overalls as space suits and needed a name badge for every guest like real astronauts have. As I could not find a satisfying model, I quickly created this name…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Credit Card Sized Checkers set
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Insert mirrors into your kallax or expedit shelves using these brackets. 4 different spacings of the bracket are available. 0.1, 0.2, 0.3 and 0.4mm With perfect print tolerances and perfectly leveled shelve, you can use four of the 0.2mm…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
PCIe/PCI bracket to fit Wi-Fi/Bluetooth antennas from an M.2 wireless module. Recommended PLA with supports as PETG sticks to supports with the force of god.
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Popis CZ: Upravená náhradní díl pro otočný ovladač stmívače LED světla. Tiskové parametry: Podpěry : bez podpěr. Filament : PETG, nebo PLA. Výška vrstvy : 0,15 - 0,2 mm. Infill : 100 %. Postprocesing : Není nutný.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna wire inside the mast. Filament used is PETG. Used 4 perimeters, 5 solid layers for top and bottom, 15% Gyroid infill.…
Wydruk około 3,94 €–4,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
robust cablemount for stiff cables or AC power cables, but easily editable model, using countersunk head screw, printing from PETG, simple, durable gcode is for 6x6 (used i.e. for flexo power cable for various hausehold machinery or AV…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![Business Card Case Holder & Stand [& Credit Card too!] (print-in-place, no support)](https://media.printables.com/media/prints/846c1284-c782-4628-b4ad-1f2f17dfd173/images/11630392_08724ebf-b08e-42b6-a261-58a1bf8a7450_f93918e8-9f3f-411a-b996-adeb883684e5/version-2.jpg)
![[REMIX] The Thinker - Voronoi Edition](https://media.printables.com/media/prints/581337/images/4915766_6be6cd43-bbda-453a-93e2-a49e6a31ec26_9f066e78-a41d-4e51-b188-f9113a4e6977/img-1-new.jpg)
