1689 modeli
Hi I made entrance reducer or closer (its modification of commercial product) Its 19cm long, 3cm high. ASA, ABS or at least PETG recommended for outdoor usage. Take care of orientation, and remember it will be pulled and probably…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This is a remix of the PRUSA RC3 Face Shield, in 888 format (the holes are 80-80-80 spaced for a standard 4-hole punch, unlike the 80-60-80 of the original). This version is also reduced in height, with a 8mm tall section for the visor…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here's my time telling EduClock, designed to help young people master the art of telling time on an analog clock. This clock face is easy to use and features a hands-on approach to learning, allowing children to physically move the clock…
Wydruk około 4,15 €–5,08 € nettoWstępna wycena jednego wariantu
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
The air coming out of the heatreak fan is causing a lot of noise in the heatsink blocks. Thanks to this fan cover, the air is evacuated from a single point and reduces the noise generated by the fan by 50%+. You will feel the difference…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
A 3D printable set of Pattern Blocks. You can learn more about pattern block here: https://en.wikipedia.org/wiki/Pattern_Blocks
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
A friend of mine shared a link to buy this kind of object, and I decided to make an easy to parameterize and 3D print version. ^w^ Usage: Simply press the object firmly onto the injection site (the side with the spikes facing the skin)…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reducer for use of large spools on Singer machines. Supplement with 1.5mm diameter wire.
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Použito na svod okapu. Used for gutter downspouts.
Wydruk około 5,61 €–6,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
the force required to insert filaments through the sidemounted filament sensor didnt agree with me so i reduced the spring compression by 1mm. reducing it more will become problematic for the center filament. integrated filament numbers…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This collection of bird heads with different beaks is used to teach young people with vision impairment about the different beaks a bird can have. the collection contains a head of a hawk, a dunlin and a seagull which all have different…
Wydruk około 6,14 €–7,50 € nettoWstępna wycena jednego wariantu
🇲🇽 ¡Bienvenidos a Querétaro, México! Welcome to Querétaro, Mexico! The most famous landmark of the city of Querétaro in central Mexico is the aqueduct or arches (Los Arcos), a civil engineering work from the 1700's to bring water to the…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Just add water. Notes: Print in PLA – although the ideal material would be Nylon The top reservoir is for reagent, and should stop flowing when it reaches the main branch, unless there is liquid in the main branch Use a paper towel as a…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Another fired round. This time 9x19 Parabellum. Also called 9x19 Luger. Tolerances are .15mm for the primer and projectile. These tolerances are not what a true bullet would have. The tolerances have been increased for 3d printing. The…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This cable duct can be used to replace the original vertical cable duct. It provides more space for cables, hides the screws and can be easily installed into each corner. You need four 8 x 3 magnets Print upright with rim. Before After
Wydruk około 5,33 €–6,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Odolná hadicová rychlospojka z ¾" na ½" (nebo opačně) s těsněním. Model je tisknut z materiálu PETG s podpěrami a skloněn pod úhlem 45° z důvodu odolnosti tlaku uvnitř rychlospojky. Soubor 3MF obsahuje též malou podpěru pro zvednutí.…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is based on the entry 6cgr from the protein data bank (PDB), presented in this publication: Dai, X., & Zhou, Z. H. (2018). Structure of the herpes simplex virus 1 capsid with associated tegument protein complexes. Science , 360…
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
I made this accessories for my friend that has big aquarium and wanted to fill it with garden hose not from outside but from kitchen tap. We added several rubber seals for leak prevention XD
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
I recommend first print only thread , for check tolerance your printer. If printed thread not fit, you can scale model (only X and Y axis) a half percent and try it again. Printed thread must be a little tight, for better strength.…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Back story Apparently in 1950 Colgate had a competition to find ways to sell more toothpaste. Someone said they could increase the sales of toothpaste by 40% for $100,000. Colgate agreed, and the the idea was to increase the nozzle size…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
[ENG] VOLTa221 is an innovative open-source kit that combines accessibility, flexibility, and hands-on learning. Each module can be 3D printed and equipped with WAGO 221 connectors, enabling quick and reliable wiring without soldering.…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
If you have a font for your official school script. You can crate your own stl with openSCAD. You can print words or letters in a grid. Adjusting the lines or print without lines. I uses PETG because it is durable and flexible. Layer…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DESKのレールにひねって接続するときの負荷が大きいので、しなり・粘りのある素材（ABSなど）での出力をおすすめします。 （当初PLAで出力したところ、耐えきれず割れるケースがありました）
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…
Wydruk około 5,34 €–6,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is bobbleDuck - a version based on 3D Printy Bobbleheads using Swingy - the swinging duck from lab_dis - a great model to be used for Bobbleheads. Great to watch after your print sitting on the hotend. Works well on your fridge or…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
This umbrella reducer will allow a smaller diameter umbrella pole to fit snugly in your patio table. It's designed for a patio table cutout of 2" (actual diameter 48mm), which fits an Ikea Äpplarö table. The umbrella cutout is sized for a…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
enable organic support everywhere
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Reducer for dust extraction for Extol ESB1010. This end cap ensures the removal of dust particles from the machine. It reduces the outlet from the machine base to a 30mm hole for a flexible hose that is connected to the extraction (e.g.…
Wydruk około 2,88 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For more information, see the OPs description: https://www.printables.com/model/394291-lungs-and-diaphragm-model
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is based on the entry 7r5k from the protein data bank (PDB), presented in this publication: Mosalaganti, S., Obarska-Kosinska, A., Siggel, M., Taniguchi, R., Turoňová, B., Zimmerli, C. E., ... & Beck, M. (2022). AI-based…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This ring fits snuggly over one of the more common automatic fish feeders to give you more control over the size of the opening for food delivery. This is particularly helpful for small pellet foods. This ring has openings from 1.5mm to…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🌎 📐 Educational Model 🔍📊 At MiniWorld3D , education is one of our primary goals. In addition to actual Lessons published for Educators , here is this free and collaborative project for anyone to enjoy. Our regular models are also used by…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Teaching Time: A Fun and Interactive Clock Model for Kids Inspiration : As a parent, I found myself looking for a fun and effective way to teach my daughter how to read a clock. The process of explaining how to tell time can be a bit…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
Keeping the basic structure of version 2, the front is closed to improve the appearance and rigidity.
Wydruk około 12,31 €–15,04 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
While printing for a long time, I noticed that the cardboard roll wears out, which creates dust, which is an undesirable phenomenon when the bed is closed. The sleeves effectively reduce this, so there is no dust at all.
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
OpenScad files available to customize the Letters or entire words.
Wydruk około 7,82 €–9,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed to make room in the floor cabinet where my MK4 lives for his soon to be friend, the Core One. This adapter snaps onto the frame and the existing spool holder for the MK4/MK4S snaps onto that. You will have to remove the filament…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
This is reduction for drill Narex and Protool. Suitable for stand from antother century :) Narex SU2. Much more better than metalic two original reductions. You can use very simple openscad code for your needs.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Special case for mounting Japanese paper towels "Kimwipe" at the bottom of PREDUCTS DESK（is also a Japanese product)
Wydruk około 18,43 €–22,52 € nettoWstępna wycena jednego wariantu
Give this to a teacher, principal or anyone at the school that you want to show your appreciation too. Let them know you truly appreciate all they do to help you or your child learn everything they need to in order to become successful!…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
With my Ender 5 i had the problem, that retracting a lot on one spot of the filament, led to grinding down the filament or rolling it flat, which results in a failed print, because the extruder can't extrude filament anymore. If you have…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Actin polymer model based on pdb file 8OI8 and EMDB volume 16888 Uses magnets to hold together Per monomer, you will need: 2 pieces of: 3.0 mm x 12 mm screws (picture attached) 2 pieces of: neodymium magnets with 5 mm diameter and 2 mm…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Protože jsem nikde nenašel alternativu nebo možnost koupě redukce k odsávání na pracovní stroj který vlastním, tak jsem vytvořil vlastní..A to na běžný vysavač Parkside vs pásová a čelní bruska na dřevo Holzmann BT 1220..Sedí přesně…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
This model is a functional miniature of a pumpjack, often referred to as a “nodding donkey”, commonly used in oil extraction. The design focuses on clearly demonstrating the mechanical principle behind the system: converting rotational…
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
Reduction ring for original spool holder. 68mm of use
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the structure 3jc5 in the protein data bank https://www.rcsb.org/structure/3jc5 DNA was extended using AlphaFold3 by building a complex of the hexamer and a long DNA piece, and aligning the result to 3jc5. The model was glued to…
Wydruk około 7,47 €–9,12 € nettoWstępna wycena jednego wariantu
Vertical orientation improved space efficiency. Also improved removability and rigidity.
Wydruk około 14,06 €–17,19 € nettoWstępna wycena jednego wariantu
Something to think about PS: Thanks to blechbude for the suggestion to make it into a key chain.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
this is an educational tool used for maths addition you can count up to ten and ill post the cubes are gonna be down below it can cost up to 18 if cubes placed next to each other on this board the cubes have dents and the board have…
Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu
Something to think about
Wydruk około 2,53 €–3,10 € nettoWstępna wycena jednego wariantu
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This set…
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
Minor Update - 14 Feb 2025: 3DBenchy model restored to the package now that it is in the public domain . Major Update - 21 Jan 2025: The Modular Wind Tunnel for STEM Education and its accessories are now FREE and published under a license…
Hello fellow Bambu Lab owners. Do you hate all that waste that the AMS units generates? Me too. That's why I made this guide how to reduce / tune / calibrate / optimize the purge waste. If you find this guide helpful, I'd be glad if you…
This remix has been run through Quadratic Edge Collapse Decimation in MeshLab to reduce the number of vertices while retaining the most true geometry. This was done to shrink the file size to under 25Mb, as Tinkercad has that upload size…
Created the missing cover for the back of the print bed and merge that with the Noise Reducer that would also go there.
AutoCoupler Cutaway educational model of an automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Original Auto Coupler Check out the Dragon Railway ecosystem! Join our : Discord If…
This is a modular system with which many kinematic chains, aka robot arms, can be constructed. The modules can be seen in image 1. The chosen actuators are very cheap servo motors without gearbox, which brings advantages and disadvantages…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples series on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples]…
Designed to be printed and used for teaching proper brushing, flossing, and water pick techniques. Gaps between the teeth will allow full demonstration of flossing in particular. Model in the photo is printed at 200% of normal adult size…
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
I saw that nobody made any low profile squashball feet for prusa mini so i did. The design is inspired by some other creators, with my own spin. Legs are push to fit, so no screws or bolts needed. i recommend printing 4 feet total for…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…
This model is compatible with the lego system.
Introduction: This is yet another educational model of a rack and pinion gear. My daughter had to give a presentation about this type of gear at school and we did not find a model that met all of our criteria: big enough (also the teeth)…
This design is specifically aimed at reducing vibrations on the Y-axis, particularly the bed, which carries the most inertia and tends to resonate at higher harmonic frequencies. In my tests using Klipper and an ADXL345 sensor, I've been…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] This model…
Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…
FR La Flashforge Adventurer 5M Pro est une imprimante 3D qualifiée très silencieuse, mais une mauvaise conception du support du ventilateur refroidissant les steppers vient perturber le résultat. Ce support permettra une fixation plus…
Scroll Down for Assembly Instructions Purpose This set of models is the result of testing to help reduce VFA (Vertical Fine Artifacts) coming from the misalignment of the Y axis belt on the MK4. As originally designed, many of the parts…
Updates May 22, 2022 added dual version of insert-empty Simple remix of the original insert-empty (single and dual) to remove 3 of the 6 tabs to reduce friction and hopefully improve insert / removal with the honey comb wall.
A Sig Sauer reduced angle grip V1 knockoff made from a photo and a random grip from Laffs Dynamics(on Odysee). Can't find what I made it from originally. 1.1 UPDATE - Now will accept the serrated washer/flathead screw An alternative since…
Este diseño en . STEP y . STL representa un motor con caja de engranajes. Un componente único para tus proyectos de diseño en Fusion 360 o Inventor.
This is an educational clock to teach the analogue clock. Also interesting for lovers of clockworks or gearboxes ;) Completely printed without supports, no need for glue or screws either! Also fits onto the Prusa mini (: The hour- and…
When I need a bunch of Dominos for repeated dry fits to dial in my parts's sizes, I typically sand down standard wooden Dominos. By printing these I get the advantage of a lower price, less of my time spent preparing and marking them, and…
This reduction gearbox is a great way to demonstrate to students how gear ratios compound (it's also just fun to have as a desk toy). Each compound gear has a 32-tooth and 8-tooth gear stacked resulting in a 4:1 gear ratio. With 9 gears…
Mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. Mount holes to fan are size M4. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
Hi I've reworked the universal mount model I remixed earlier to make it natively compatible with the Neptune 3 and 4 series, I can guarantee the dimensions will fit the 4 and 4 Pro with 20x38.5mm feet, and I think they should fit the rest…
Made to fit an Ender 3 V2 print bed (235mmx235mm) when rotated to face a corner. How to Print Scaling Scale to 10000% for a ~140mm wide head (or 9750% w/ heat gun to reshape the back) roughly 200mm x 229mm x 166mm (xyz) w/ opening facing…
Please note: this is designed to be a press-fit INSIDE a blast gate (or dust hood) with a 4-inch OD, as shown below: … which is exactly how the POWERTEC 70291 (after which this was styled) fits inside a blast gate (or dust hood) with a…
Just about everything should be able to be printed without supports. Material of choice can be used, but I'd recommend something on the order of PETG strength or greater given the nature of hex interfaces. Interlocking dovetails of the…
This is made to accommodate a “press fit” for the tapered adapter that came with my VacMaster Shop Vac 2.5" hose. The stock tapered adapter's OD (outside diameter) starts at about 58.5 mm at the base of the connector and tapers to about…
🇪🇸 Welcome to Roman Hispania! Legado3D is an archaeologist that does digital preservation of historical legacy, and they are taking us back in time to the Roman Empire with this model! The Aqueduct of Segovi a (Spanish: Acueducto de…
Introduction: Welcome to the ultimate playground innovation – the All-Age Catapult! This isn't your average, run-of-the-mill toy. Oh no, this is the pinnacle of fun that defies age, gravity, and possibly the patience of your neighbors.…
This helper holds two wires together so you can hold the solder and soldering iron. This is a remix of a great design by PeterLandin. I needed something a bit smaller, so I reduced the size and added a couple more slots for various wire…
This is the first release of a model that I intend to refine further. Help test this out, provide your feedback. This assembly reduces auxiliary fan noise and improves chamber heat retention. While also preventing the buildup of hot spots…
The cannibal math teacher you dont want to have
Cover and noise reducer for the rear of the AD5M bed. I saw there are covers from other makers for the side mounts, and a rear plate for the AD5X, but not the AD5M or 5M Pro. Printed in PETG. Pops into place. Assume it will work well as I…
Since the original was copy right struck on a different site, I redesigned this doll stand for generic fashion dolls of about 25 to 30 cm height. These dolls may or may not attend schools of secondary education, potentially with a…
A sexy one line wall art. Easy to print and attachable with a nail. You can also buy this product on my Etsy-Store: emberwork.de
This helps to make the waterflow a bit stronger and have less water running just along the sides. It should fit tight, so there is no glue needed - and so they are changeable if you want another color
Here at Vestibular First, we are excited to share our knowledge and passion for the anatomy that makes up the vestibular system! Combining this knowledge with technology is at the heart of our company. There are only a limited amount of…
