Źródło oznaczyło ten model jako treść 18+.
- Pobrania
- 5110
- Polubienia
- 779
- Ocena
- 4,94
104 modeli
Źródło oznaczyło ten model jako treść 18+.
https://creativecommons.org/licenses/by-sa/4.0/ https://it.wikipedia.org/wiki/Piet%C3%A0_vaticana#/media/File:Scan_the_World_-_Piet%C3%A0_(Michelangelo).stl
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Moses by Michelangelo Repaired for 3d printing. Minor fixes to base and a few holes in mesh.
There is a model of a Statue of David by Michelangelo, in Florence, Italy.
This is a lowpoly remix of Michelangelo’s sculpture of David from "Scan The World" The .gcode file has fairly robust supports because the model is pretty tall and skinny, but they come off easily enough and don’t leave a mess behind. Feel…
MICHELANGELO TMNT REMIXED
Źródło oznaczyło ten model jako treść 18+.
I reimagined Michelangelo's David through a 3D project, complemented by a column with an Ionic-style capital serving as its base. This endeavor aimed to enhance the presentation and aesthetic appeal of the iconic sculpture. In…
Bust of famous David statue by Michelangelo. “Cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899” Make this the artpiece of your livingroom or office. Scale in your slicer…
This is a remix of: http://www.thingiverse.com/thing:657397 . I edited the original with MeshMixer ( http://www.meshmixer.com ) to make it 3D printable. MosesStatueRemeshed.stl is smaller in data and is easier to slice. I filled the holes…
Thank you for downloads, likes… Enjoy !
Michelangelo`s eye of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
A re-shape, with more details, from the amazing work done by 3DWP . Dimensions now are about 83x57x200mm, and i've correct some detail and mesh errors. My model (in photo) it's about 350mm in height, keeping the aspect ratio.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Michelangelo`s eye of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
Updated model uses more affordable counterweights (m16x50 bolts) and raises the weight on the pen holder for less swinging, making for straighter lines at higher acceleration. assembly guide:…
David Statue Extrudr Green-Tec Pro white 220/60/0,2, 3 shells, 15% infill
David (Michelangelo) statue Image by wikipedia.org Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
TMNT set Fortnite (Donatello, Michelangelo, Raphael,Leonardo)
Model od https://www.myminifactory.com/object/3d-print-michelangelo-s-david-in-florence-italy-2052. Dejte si pozor na podpěry, hlavně na loket.
Michelangelo`s mouth of David carefully modeled to be used as an ornament. My advice is to print it with 100% infill, to avoid transparency. I printed this model with a 0.1mm heigh layer as in the picture. the object must be printed as it…
Lowered poly count and fixed base.
This is just a different approach to a Gondola for a Polargraph robot. My main goal was to get the pen up and down to a smooth linear motion and make it easy to change colors. You need: 2 x 6806-2RS Bearrings (30x42x7mm) 1 x mg90 servo…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
I used pieces from several existing models. I also created a more realistic turtle head that's dummy 13 compatible. All files are 100% size. Leo and Raph are 125% in my pictures. Mikey is 100% (and has different hands in the pics. I can…
A piggy bank shaped like the head of Michelangelo's masterpiece, "David".
Set David into any pose you want with fully rigged skeleton
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Jade White At layer #13 (1.12mm) swap to Black At layer #14 (1.2mm) swap to Orange At layer…
Bring the ultimate party dude to life with this incredibly detailed 3D printable Michelangelo figurine that captures every iconic detail of the beloved Teenage Mutant Ninja Turtle! This expertly crafted STL model showcases Michelangelo in…
I used Meshmixer's ''Make Solid'' tool to create a blocky remix of Michelangelo's David statue ( https://www.thingiverse.com/thing:502967 ). This tool fills the mesh with stacks of cubes and gives the model a Minecraft like appearance.…
Truly the ideal male form. A split version is included for those of you with smaller printers. I am one of you and I feel your pain. Consider beefing up the supports under the elbow as that was a common point of failure for me. The single…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1 mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to Orange At layer…
This is a remix of few parts I needed to build my drawbot with https://github.com/MarginallyClever/Makelangelo-software and Marlin 2.0.9+ firmware. It uses LR 20 batteries as counter weight. I used all the parts from…
Introducing the Low Poly David, a modern take on Michelangelo's legendary masterpiece! This geometric rendition captures the essence of the iconic statue while giving it a sleek, minimalist twist. Perfect for art enthusiasts, this 3D…
Bust of Michelangelo's David Bottle Topper for Wine and Alcohol bottles. This Topper is used with modular Bottle Stopper (see link below). Screw thread on the bottom screws into the top of the Bottle Stopper. Print vertical with Organic…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
To get the best result: Use organic supports.
Inspired in 3D Printy's emoji bobbleheads, Made one out of Michelangelo's magnum opus. Files: .3mf files for both 0.4mm and 0.6mm nozzles, Prusa MK3S Had to make an elliptical negative volume for the head, so including the .STL Made a…
This is an upgrade print. It updates two parts of the Makelangelo plotter robot pen holder. The screw that holds the pen is moved to the top for easier access. An optional cap for the screw is also provided. Replace the equivalent parts…
Any feedback would be greatly appreciated . Nozzle: 0.4-1mm Layer: 0.32-0.6mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
the original file by 3DWP is very heavy in details and also in size. this causes a lot of work for your slizer. for faster slizing I made a couple of versions with reduced mesh geometry. there are still enough details included for…
Michelangelo di Lodovico Buonarroti Simoni – Buste Description (Français) Ce buste rend hommage à Michelangelo di Lodovico Buonarroti Simoni, figure majeure de la Renaissance italienne, dont le génie a profondément marqué l’histoire de…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x187.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
lithophane of the sistine chapel ceiling by michelangelo created on itslitho.com generic white pla 200° nozzle 0.4mm 50° bed Category: 2D Art
Filament : GST 3D. Marble PLA : 0.20mm. 15% Infill : Gyroid. Nozzle : 215c. Bed : 60c. Support : Organic Soruppt.
Creation of Adam - Michelangelo continuous drawing lines
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to naranja At layer…
Printed on an Ender 3 Pro with Supports in Polymaker Polylite Natural PLA with Nailpolish Paints. This would probably turn out even better on a SLA printer than on a FDM, but I don't have one. Settings (time = 4 hr 10 min) Layer Height -…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x103.91mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
These are the DXF files for the Makelangelo 3, a polargraph style mural drawing robot. At the time it was designed I was frustrated with my unreliable 3D printers so this machine contains ZERO 3D printed parts. Their latest version is the…
Statue of Michelangelo *picture with ai help
Michelangelo's David Bottle Topper for Wine and Alcohol bottles. This Topper is used with modular Bottle Stopper (see link below). Screw thread on the bottom screws into the top of the Bottle Stopper. Print vertical with Organic Supports.…
Background Makelangelo is a wall hanging, mural drawing machine. There is a motor on the top left and top right of the wall, and belts hang down from there to the pen. To draw on the ENTIRE wall you need a belt that goes diagonally across…
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
Recommended order: Black, Dk Gray, Gray, Light Gray, White. Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the MK3 jogs after a change it will spit…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Orange Transmission…
I created this Spool Holder for my TEVO Michelangelo. It's like this thing: https://www.thingiverse.com/thing:2832449 but I designed two parts for better printing without Support Material. It can be print at the Michelangelo, please look…
Introducing our innovative homage to the timeless masterpiece, Michelangelo's David, reimagined through the lens of modern digital art. This 3D printable model seamlessly blends classical sculpture with contemporary pixel aesthetics,…
COWABUNGA, DUDES! TURTLE POWER! 🐢🍕 Bring a little nostalgia from the sewers of New York City to your everyday carry with this awesome Teenage Mutant Ninja Turtles Michelangelo Keychain! Inspired by everyone's favorite pizza-loving party…
you can connect any pinda size abl sensor. stays on the front, outside of hotend cover.
This 3D model depicts the classic masterpiece sculpture of Michelangelo's David standing in a contrapposto pose on a stone pedestal base. Sliced for standard 0.4mm nozzles at a 0.2mm layer height, 2 wall loops, and 15% Gyroid infill, it…
Model Created by using 3D scan of the original sculpture, and reducing mesh to core shapes. Printed on AdventurerC3 from Flashforge in PLA. Printed with a support for the left floating hand.
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. TMNT Michelangelo Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher…
Michelangelo's David Espresso Tamper. 53mm diameter grooved tamper. Printed with four layers and 75% infill for extra sturdiness. Handle connection to the sculpture's shoulder is solid, the legs are a bit of a weak point but it held up…
Enjoy this beautiful piece of art for free. Not for resale. This is to be given away freely for all the world to enjoy. Gift it to your wife. Give your daughter 2. They'll say “Thank you husband/father for this wonderful statue of Mr.…
A 3D printable representation of Michelangelo’s famous David, one of the most iconic masterpieces of Renaissance sculpture. The model captures the heroic proportions, classical anatomy and sculptural character of the original artwork. A…
Take the fiddling out of getting a marker into your Makelangelo vertical plotter robot just right . This handy tool makes it quick, easy, and perfect every time. Fit the cap over the wide end of the Makelangelo plotter. Insert a marker…
Frame for hueforge Michelangelo mask Print with supports for the hoop Link for the hueforge https://www.printables.com/model/672981-michelangelo-mask-hueforge Please "Like", review follow and upload make. I spend a lot of time designing…
I like the Spoolholder from Scobo, but I love removable parts. So I remixed it to remove it quick for transport. After removing the support I had to polish one side a litte P.S. may be it's also good to print 0.3 Layer and 100% infill - I…
this printer gives me perfect prints and i wanted to make it better at higher speeds. using 2000 acc. and has zero ringing thanks to input shaper(marlin). probably i can use higher acc. but stock hotend will limit. you will need 3x m3…
Start your day the Ninja Turtle way with this Michelangelo Egg Holder! Perfect for fans of Teenage Mutant Ninja Turtles, this little guy brings a whole lot of 80s energy to your breakfast routine. With his iconic orange mask, shell…
Action Video The Makelangelo robot normally ships with suction cups for mounting to a window. If you'd prefer to mount it on a whiteboard, we recommend these handy hooks. Something about whiteboard cleanliness or the surface material…
As seen on Makezine and Hackaday ! This machine is like training wheels for 3D printers. All the same technology minus the dangerous stuff for 1/10th the price. Get the latest hotness in kit form from the official site or download these…
An update the world reknown Makelangelo vertical plotter! The new pen holder prints in 1/4 the time with less parts and much tighter tolerances for a cleaner drawing. Needs two 6706 bearings (30x37x4) one small paperclip one Phillips…
The feet on my Delta Cycle Michelangelo bike rack keep sliding around on my floor. This holds them in place. BOM 2in double-sided sticky tape. I used VHB, but perhaps something thinner would work better Printing 2 feet, so print 2 copies…
A sculpture by Michelangelo Buonarroti depicting the Virgin Mary holding her son in her arms after the Crucifixion. One of the most beautiful works of art in the world.
I want to remove the spoolholder quickly without screwdriver Print Settings Rafts: No Supports: No Resolution: .2 or .3 Infill: 50% Category: 3D Printer Parts
this is a scan of an action figure "Michelangelo" from TMNT
Use this pair of hooks to mount your Makelangelo polargraph robot to a whiteboard or easel without screwing, glueing, nailing, or frustration. Print two pairs, one for each end of a Makelangelo 5. May also work with Makelangelo 3 but we…
Replacement for the PSU Plug on the Tevo Michelangelo For Xbox 360 PSU. My PSU exploded durin the first two test prints so I had to come up with a solution fast. What I did is I removed the PSU and the Powerplug adapter from the case and…
This is a simple hanger that fits the holes on a Makelangelo V5 from www.makelangelo.com This is nothing offical from Makelangelo but I just wanted to hang it over my door. You need two of them. Print on their side with some support for…
Detailed 3D printable Frog Version Of David Statue By Michelangelo figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
David by Michelangelo Vase The head of Michelangelo's David, cut open on top and hollow inside. Fill it with flowers, or keep it on your desk for pens and brushes. The photos show real prints in white, gold, black and pink. Three sizes…
David by Michelangelo Vase V2 The same David bust from my first David vase, open at the top so it holds dried flowers or pens. What is new is the base: a thin black disc under the bust that makes it look like a museum piece. It is one…
Makelangelo vertical plotter can hang on a window with these hooks. They pair perfectly with ULINE suction cups ( https://www.uline.ca/Product/Detail/S-16142/Store-Supplies/Suction-Cups-with-Hooks-Medium ). A padded chair foot at the…
Detailed 3D printable Frog Version Of David Statue By Michelangelo V2 figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
Filament : GST 3D. Marble PLA : 0.20mm. 15% Infill : Gyroid. Nozzle : 215c. Bed : 60c. Support : Organic Soruppt.
A piggy bank shaped like the head of Michelangelo's masterpiece, "David".
The Ninja Turtles' wildest member, Michelangelo, is ready to party on your print bed! Features of Our Models: 10x Scale: An imposing size that gives the figure excellent display presence. No Painting Required: Designed to look complete…
Famous Art - The Creation of Adam - Michelangelo - 1511 3D printable model.