Liczymy pasujące modele…
prints best with 2 walls and 10% infill, suitable for 175mm TIG tungsten electrodes with hex sides, so it cant roll of the table :) when going with more strength, you might want to use the looser Version, since the threads get kinda…
Part A: Countersink hole for M3x12-14mm Flat Head Screw Part B: Hole for M3 Heat-Set Insert
This is a remix of the TIG Tungsten Electrode Storage Container by @LeHaDesign . I added a flat section to the side of the top portion for applying a label. It should fit a 58mm (2.28 inch) long strip of the common 12mm (½ inch) label…
This welding rod holder is a vase mode print suitable for tougher filaments PETG, ASA, ABS etc. Note that it is not suitable for hygroscopic rods as it doesn't seal the rods from moisture in the air. I set the extrude width to 0.8mm for a…
I printed this at .16 layer height at 45mm/s with 50% infill.
With M3x12 Hex Head Screw And Nut
I'm endeavoring to print the entire Gen 1 Pokedex in the low-poly style popularized by Flowalistik, but the majority of Pokemon still have yet to be designed! You can follow my progress on YouTube or Instagram, @zembacraftworks or…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs The vitals monitor plays a crucial role in clinical simulations, enhancing the realism and educational value of…
Tig welding tungsten electrode holder there is files for both 1.6mm and 2.4mm the top suits both with a gridfinity base, loop at the top for a lanyard or carabiner or can be stored in a pocket or tool bag. Each tube can hold 19 electrodes…
1 x 1 Gridfinity holder for brass electrodes. Settings: PLA or ASA 0.12 - 0.3 mm layers 10% Infill 2 - 3 Walls For more information about desktop EDM check out rackrobo.io
1 x 1 Gridfinity storage for EDM electrode holders/cartridges. Contains up to four 2x6 mm neodymium magnets. Settings: PLA or ASA 0.12 - 0.3 mm layers 10% Infill 2 - 3 Walls For more information about desktop EDM check out rackrobo.io
waterproof so far, no clue how airtight had some silicone grease on the threads when I submerged it, might have made a difference If someone with better CAD skills could add some strength and a way to use O rings that would be great!
This is a holder/handle for the spotweld electrodes of a battery spotwelder. Specifically the ones found on Aliexpress. With this Thing you can hond both electrodes with one hand. You can make your own spotwelder using a microwave…
Storage box from HT pipe for keep dry welding rods with silicagel. Two sizes DN50, DN75 are available.
the tube itself if you can manage to print it sideways in some manner it will help with strength as the layer adhesion is difficult here
This is the publically accessible repository for the 3D files to accompany the paper “Additively Manufactured Rotating Disc Electrodes and Experimental Setup” Please use whatever material you have access to, I suggest ABS for the main…
There are 2 options: model with holes for magnets on the bottom and model without these holes. The top of the model is the same for both versions. The case has the following dimensions: outer diameter - 26.5 mm inner diameter - 18 mm…
I added a small part onto the upper side which should allow one to remove the inlay. Unfortunatelly it has been broken off on my print so it is missing in the picture. I think the reason are my print settings.
Pequeño llavero del Pokémon Electrode para imprimir en 3 colores con alturas de relieve diferentes para el cambio de filamento. Especificaciones Para imprimir el llavero y que los cambios de color se hagan correctamente la altura de capa…
The EleCell-100 is a robust, modular electrochemical cell assembly designed for 100 mL standard glass beakers and compatible with a 3-electrode system (Working, Counter, and Reference electrodes). Ideal for educational labs, research, or…
Keep your TIG tungsten electrodes organized and protected! This 3D-printable TIG electrode holder is designed for convenient storage and organization of tungsten electrodes used in TIG welding. The cylindrical design features a ribbed…
Want to replace your electrodes with universal ones? Here you go!
long Version. internal length 177mm long Version with separation. internal length 177mm short Version. internal length 89.5mm short Version with separation. internal length 89.5mm holder for four containers. uses 8x 6x8mm Magnets
Hello, I designed a small box for TIG electrodes. Since I only weld with a stubby setup anyway, I buy normal 175mm long electrodes and then cut them in half so that they fit perfectly. Please don't get confused the pictures I took are the…
electrode and voltorb from pokemon quest PARÁMETROS DE IMPRESIÓN 3D requiere un poco de soporte
Replaces the bottom plate with stock hardware. Other names for the spot welder: MashWB+Merc. BlackTech Lab ODM PLBLABS
A pH-electrode station consisting of a base that holds a standard 50 ml Schott bottle and a sleeve for the electrode, that acts as a cap and depth stop. The base is best printed in PETG for flexibility of the clamps that hold the bottle…
Chute for the DF64 Gen grinder. Designed with better roudings to reduce clogging and retention. There are no holes for electrodes of the plasma generator as I have had a lot of retention an ground beans sticking to the metal pins. In case…
TIG Tungsten Electrodes Container 50mm 60mm
TIG Welding electrode size gauge. Diameter of all holes are 1/8in. Ideally to print in PETG, however from my testing the labelling is only readable when printed in PLA. If anyone is interested I can resize text to make it readable with…
Made in Autodesk Inventor (ipt file included)
This cap has six holes so that you can insert a platinized electrode and stainless steel electrode for in-situ electrolysis and lines for CO2 sparging, in addition to the inflow/outflow lines. Printing Important: only use high-temperature…
Frankenstein Head and electrodes for original single plate print LEGO Skeleton posted by @maxelman
Easy to print magnet for fridge - pokemon electrode. You need one magnet 4x2mm
An EEG electrodes holder for a basic 7-electrode EEG setup using g.SAHARA electrodes. This is my entry in the Ars Electronica 2017 Br41n.IO hackathon, awarded the second place. A result of ~6 hours of design, it is still quite rough…
The Reference to Electrochemistry Electrodes can be placed in a 15mm centrifuge tube, and placing them in this tube serv
I created this in Onshape so that I could use the Ender-3 S1 Plus as the CNC part of the EDM project created by RackRobotics. As I have the original PowerCore, I have not started using the Wire EDM mod yet. As it is, I need a way to hold…
Electrode Tweezer for ABL800 (700, 800, Flex etc.) Designed to remove the electrode from its position without the need for direct contact with the electrode itself. This method ensures safety by minimizing the risk of accidental contact…
Suction bulbs for standard EKG/ECG machines' electrodes. I recommend using FLEX/TPU, printing with a 0.4mm nozzle, 0.20 layers hight, and 10% infill, depending on the hardness of the filament used (the examples were printed with Tinmorry…
Cap designed to fit with the Dropsens Boxed Connector for Screen-Printed Electrodes DRP-DSC4mm. The boxed connector in turn works with Metrohm Dropsens screen-printed electrodes. To reduce noise during measurement, a Faraday cage is…
The adapter fits Tarlido cordless rotary tool from Amazon and is designed to sharpen electrodes @ 15°. I also purchased (from Amazon) Jingling diamond cutting wheels size 20mm. The rotary tool costs $13 and the 10-pack of diamond discs is…
The TriCell-10 is a compact, 3D-printable electrochemical workstation designed to securely hold a 10 mL standard glass beaker and precisely position three electrodes —working, reference, and counter—for accurate and repeatable…
vergolden, verchromen, vernickeln usw… https://real-gold.de/
Kweld Turbo Tunnel Designed to turbo charge electrode cooling Place the cooler over the top of the electrodes and they go from 70C to 25C in just a few seconds. What's needed? 100g PLA/PETG (ABS might shrink and cause inaccurate…
These are the files for the MindAffect BCI headset based on TMSi water based electrodes. Further documentation can be found here: https://github.com/mindaffect/Headset Added next iteration with integrated electrodes: Print "disc_holder"…
Holder/stand for screen printed electrodes, designed for Metrohm Dropsens brand screen printed electrodes with ceramic chips. One piece holds up to 12 electrodes Screen printed electrodes are useful for taking measurements in-situ, and…
43mm in diameter, 80mm long. easy to reassembly and so much better to use. I print it with 50 % innfill. PLA used. Feel free to change it to your needs.
A small box (120x110x28 mm) designed to store pulled glass microelectrodes or micropipets. Use double-sided poster tape on the center pedestal to hold the electrodes, the back opening allows for the connecting wire to extend out without…
A collection of adapters for holding (standard) electrochemical electrodes in ground glass joints. A common use for this would be to hold electrodes for lab scale H2 production or for potentiostat electrochemical measurements inside a…
Remix where I added embossed size labels for .040, 1/16, 3/32, and 1/8
They no longer make replacement parts for this electrode so I designed a replacement. Used an old platinum wire from a different part we had. If you want to do it cheaper make sure you use some sort of anti-corrosive wire like NiTi or AgCl.
I got a request from someone that has to use an ankle orthosis, and needs to wash and dry the electrodes every day. That's why i've create a simple stand to simplify the drying process and to organize them.
This files are for the 3D printed enclosure of the FuNIITriz, a microelectrode polishing machine, made with HDD motors and Arduino microcontrollers. More information about the project can be found at https://www.funiilab.com/funiitriz…
A simple plastic cap that can be used in place of the stock rubber cap supplied with the welder. Quick to remove and replace between jobs. I printed in PLA with a .4mm nozzle on Bambu X1C.
The summary pretty much says it all. This is a little adapter and stand we use to measure pH with a Xylem/SI Analytics N6000 pH Microelectrode with volumes down to 200 µL. We needed a solution for small volume measurements to avoid…
A 4 mm diameter disk electrode intended to be printed in ProtoPasta Conductive PLA and normal PLA to produce a low-cost electrode for electrochemical measurements. This electrode has been demonstrated for the measurement of dissolved…
The model works with 20 ml and 10 ml beakers. I also included a cap for 20 ml beakers that holds 1 reference electrode and 8 working electrodes.
Holders for INTEX Krystal Clear electrodes WARNING: I'm not sure what the best filament is — I printed it in PETG, and it only lasted about two months!
45 degree micropipette and microelectrode holders for scanning electron microscopy imaging (SEM). Printed with conductive filament (Protopasta CB/PLA). The 45 degree allows for imaging both sideways and top view of the microelectrode if…
The holder was 3D-printed using PLA with a hotend temperature of 220 °C and a heated bed at 65 °C. It provides a stable support for the glassy carbon electrode, ensuring secure positioning during drop casting the ink.
Pegboard-mounted triple quiver for SMAW stick electrodes. Rods stand nearly vertical with ~120 mm of tube support; 14″ (355.6 mm) sticks extend above the rack. Key dimensions: Tube IDs: Ø24 / 28 / 32 mm (≈10–15 rods of 3/32″, 1/8″, 5/32″)…
Detailed 3D printable Chibi Version Of Electrode Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
Easy to print magnet for fridge - pokemon electrode. You need one magnet 4x2mm
Suction bulbs for standard EKG/ECG machines' electrodes. I recommend using FLEX/TPU, printing with a 0.4mm nozzle, 0.20 layers hight, and 10% infill, depending on the hardness of the filament used (the examples were printed with Tinmorry…
Tig welding tungsten electrode holder there is files for both 1.6mm and 2.4mm the top suits both with a gridfinity base, loop at the top for a lanyard or carabiner or can be stored in a pocket or tool bag. Each tube can hold 19 electrodes…
the tube itself if you can manage to print it sideways in some manner it will help with strength as the layer adhesion is difficult here
