Liczymy pasujące modele…
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
Model has got 3 parts. Upper and lower part screw together and leaf lace up to the acorn. Printed with viva la bronze and opal green PLA. In leaf gcode is colour change.
V poslednej dobe ma fascinujú kĺby, ktoré sú potlačené s Tlač na mieste. I have had this model in my head for a long time, finally after several tests I managed to realize it. It is a round Clip with movable arms and diameters of 20, 25,…
Result of office Avocado seed floater challenge. Printed in ONE piece. Mechanical lock. It is easy to open when the roots come out. Before use, you cut out the 1 layer brim between the lock.
more recent version: https://www.printables.com/model/1083785-robot-hand-v2 A robot hand: print in place, but posable via the embedded tightening screws. Slice with standard Cura PLA 0.2 mm layer / 0.4 mm noozle. No brim, No support…
I've seen other Minecraft diamond ore lamps in various places by they all seem to lack the definitive pixelation that Minecraft embraces. By leveraging techniques used from 3D printed lithographs and some of the features of the latest…
openable poke ball 3 files loaded upper part lower part stick you can use 1,5mm or 2mm long screw instead of stick original size 80mmx80mm
Since there are obstacles under my desk and the drawer size is limited, common drawers cannot be fully opened and are inconvenient to use. I designed this drawer that can be fully opened. There are 2 trays with a total of 5 parts that…
Just print it :)
Note: This design is not mine. The original creator of these parts is pekcitron . The parts were reworked by jltx and uploaded here . Many of you will never find / have found these parts on Thingiverse, but since I think this upgrade…
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…
Info: well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time design is parametric (see source file), so any book width/height is…
I originally made these doors for the Resident Evil 2 board game to integrate with the modular walls that I created, but then I got to thinking that someone might like to use the doors without the walls... so I made these! It's a real…
Basics & Demo This display case tightly fits onto the Taurus cooling duct, version 2 and up. You can find this cooling duct here: https://www.printables.com/model/511962 If you're not already running a Taurus cooling duct that you are…
A pokeball that opens and closes. Great for a costume prop. Printing Print as oriented. All parts need supports. The black rings should use “organic” or “tree” supports. Everything else can use “snug” or regular supports. Post Processing…
I have mirrored the model of the Y-Rod holder of the MK3s+, so that the upper part is removable and the axles can be taken out upwards. Compared to the original Y-Rod bracket you need a total of four additional square nuts and bolts. Make…
This is a project I put together as a gift for my niece. I've only made the one and I was super pleased at how well it came out! I used the existing (Totoro)[ https://www.thingiverse.com/thing:12146 ] model by (Joo)[…
[update 2024-01-01]: i have fully redesigned the joint, now it is easier to print, the connection to the ball is stronger, and the screw is better too. I have not updated this model with it yet, i plan to do it in the coming weeks (also…
Based on the original rod holder for the Y-axis I modified them to be openable without unmounting and calibrating the Y-carriga when for example bearings have to be changed. Only one screw is need for each holder. On the two holders for…
This is a version of the famous Gear Bearing by emmett - Thingiverse . I reduced the number of gears to 4 which lets you see the gears better. I also made it a bit smaller for a faster print. This is a great torture test for the MMU,…
We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…
Instructions: Print both halves Clip them together (option) color the text with a marker or acrylic paint Cut a picture and put it inside (19x13 mm) This is a collection of all my valentines designs: ValentinesGifts Express your love in a…
Did you know 27 million business cards are printed every day - and 88% of those are thrown out within a week? That's 8 BILLION cards thrown out annually, or about 8,000,000 kg of waste. Business cards are still an essential part of…
Authors: Anna King, Gregory Macke, Jackson Romelli, and Lillie Orians The body powered hook is a below the elbow prosthetic made to aid the user in pushing, pulling, grasping, and manipulating objects. The device was developed in response…
Los módulos se sujetan de una guía, que debe fijarse a una superficie vertical. Pueden quitarse a mano simplemente subiéndolos, y pueden reordenarse a voluntad. Muy prácticos para tener relojes y anillos a mano y no sufrir intentando…
A refined version of the easter egg can be found here: https://www.printables.com/model/822685-openable-easter-egg-refined ------------------------------ I needed to create a "large" easter egg for my cousin's 2-year-old daughter. The egg…
I love Frenshape's Dodecathing and wanted to add a little extra flare to the spans. I also filled in the endcaps so I could scale down the prints if desired. I've been able to print successfully at 60% with the new endcaps but I've not…
A model of the Floating Maxwell the Cat, modified to be printed in multiple colors using the Bambu AMS.
I made some openable crates that can be used in various tabletop games! I thought that it'd be fun to have them be openable, as I could then put little pieces of paper inside each one that lists what's there when they're opened up. Maybe…
This is a sliced-up version of https://www.thingiverse.com/thing:2091732 It's enabled to insert a 3mm LED in the front and use the trigger with a push-button and a 9v battery in the grip. Recommended to print in colored (red) PLA and then…
Openable Avocado Seed Floater by @DominikCisar, with the unnecessary bottom "support" layer removed.
The Factor must grow! This is a model of a Factorio Wooden Chest that can open up and even store a couple circuits. See the 3mf file for my personal choice of print orientation and settings.
Half scale can model with a threaded removable lid. The pull tab should be glued on with superglue and a string can be tied to the pull tab to hang it. Stick on a label 52mm tall and 120mm around. No supports are required (print lid…
Gingerbread house with a hinged roof that can be opened. Slowly learning my way through CAD and CAM, applying what I've learned so far. I started this a little late for this contest so it's bare on the sides and back, I hope to update it…
Another Portable Drill Press, designed around the makita drill XPH07Z . It can be used with a vacuum pump to hold the position, even horizontally. The base can be used to drill round stock with its vee-groove. Makita small router base…
Im planning to enclose my XL in the long run, and the LCD was in the way for a door on the aluminum extrusion. Base on the enclosure are the Sidecovers that you can find here:…
Inspired by this video from bitluni I've designed this LED matrix lamp Print instructions The lamp shade needs to be printed in spiral vase mode with a layer height of 0.2mm and 4 bottom layers The base is printed with a layer height of…
Print instruction: material: PETG supports: recommended (see attached picture) layer height: 0,2mm nozzle diameter: 0,4mm brim: recommended enclosure: not required
For all those US BMW E9x owners, this is the little spacer that sits inside of your headlight housing that you need to re-enable your rear fog lights. This is the same piece that is used for your front fog lights inside the switch…
310.0134: CAB WITH OPENABLE DOORS (print in place) Yo, the driver’s cab now got them working doors that print right in place – no extra assembly needed. They pop right outta the printer, already in the right spot. But yo, after you remove…
I just needed the bottom covered as well. probably be printed in pla, as when I tried petg it was harder to put together Category: Games
This is a slight remix of the original Fully-openable Under Desk Drawer from PeterH. The only modifications are the Outside-L1 and Outside-R1 files: the stems of the catches have been shortened so that they are more difficult to raise out…
Video here; https://youtu.be/H9cWcQdhQoM This is a pet feeder/treat dispenser. There are others out there, but none of them were exact for my requirements, and most were not in formats that I could easily modify. This pet feeder needs to…
This is my Heart-Shaped Pokeball. A random idea I had. This heart container has a hinge to allow it to open/close, with 2 notches in the front of the box to allow it to snap-shut. No external hardware required. This also prints with no…
This is a print in place foldable heart. When opened up it reveals a spot where you can glue in a photo of a loved one. To print it place it on it's back not like on my photo ;) Printed in PLA 0.1mm layer hight
Organize and hide your cables under your desk or anywhere else. Attach using double-sided tape. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.3 Infill: 30 Category: Hobby
Trophy for Boundless Creativity Enabled by 3D Printing This trophy symbolizes the freedom and possibilities that the 3D printing industry offers. It represents an Open Mind , the free spirit, and the courage to innovate embodied by 3D…
I needed to create a "large" easter egg for my cousin's 3-year-old daughter. The egg had to be able to be opened to store candy inside. In this refinement the open and close feature of the egg has been refined. The egg itself looks more…
a simple wallet which looks very clean
Egg for darning socks, which can be opened into two screwable parts and contains small parts essential for sewing. Material used: PLA CRYSTAL. Only the thimble is in TPU.
Openable Gonggi Set with Storage Case Enjoy the classic Korean game Gonggi with this 3D-printable, openable set—complete with a compact storage case! The gonggi pieces are designed for a smooth toss and catch, and the case keeps…
I printed this with the same settings as my avocado floater - clearly not optimal. I used a 0.6mm nozzle and a 0.36mm layer height with E3d Spoolworks Edge. Dimensions and settings are unlikely to be very critical. Print is fast, took me…
I would print it with the same parameters as the mk4 parts: Print settings: 0.20mm QUALITY Filament: PETG (tested on Prusament) 15% Grid infill You will also need for each holder: M3 x 10 screw - 1 piece Square nut M3nS - 1 piece
A 2-in-1 Darning egg with storage inside :) 🔩 Print settings: no supports needed ⏩More of my sewing Essentials: Link: https://www.printables.com/@universalmake_168616/collections/1303275 💸 Want to sell this design commercially or support…
The model in the photo is printed with PLA 0.25mm Layer. Support are required for the cover (3) and the top (2) Use glue to connect the 2 handle part (5-9). Clean the hole before inserting the pin.
A sign that flashes "RECORDING" when you trigger it via WIFI. Used to warn family members, friends, and relatives that you are recording and not to be bothered. WIFI is handled by ESP8266, LEDs are WS2812, and command can be send via an…
This is a modified version of the Ducky Swimming model that contains an internal space to place a module. In this case I used a module from bigdawgsgreetings that can record 10 seconds of audio and replay the audio when light sensor…
Add a touch of magic to your holiday decorations with these delightful 3D-printed ornaments! Perfect for hanging on your Christmas tree, wreaths, or any festive setup, these ornaments aren't just beautiful—they're interactive too! Each…
14" Laptop Stand to use with screws 2xM3x14 and 2x M3x20
Authors: Jackson Romelli, Lillie Orians, Anna King, and Gregory Macke These assistive devices were developed to attach in the grip of the J-hook of the EnableUC Body Powered Hook Version 2, were they could hold common objects to…
Dice case openable dice dimensions 14x14x14 and 12x12x12
Brittle Gum Benchworks’ (BGB) remote controller uses an ESP32 CYD (cheap yellow display) as a remote controller for classic Bluetooth enabled robots like BGB’s QB and HP Robots’ OTTO, and it will work with any Bluetooth Classic (SPP)…
Unopenable Piggybank 'Safe' Piggybank 'Safe' with coin slot. unopenable - Unopenable - Size: 100x86x150mm Printing tips for supports: -'Support critical regions only'. -'Supports on build plate only'. 06-24-2026 - Rounded corners and…
I was searching for some accessories to mod for Loftyo, and I found this amazing design of a print-in-place backpack. Print Settings: Layer height: 0.2 or less Supports: On the ball joint only After printing, use a flat-ended screwdriver…
A small connector to attach the barrels to the plunger tube after removing the rotating barrel alternator in the X-Shot Bug Attack Eliminator/Dino Strike Claw Hunter (they share the same internals, even though the shells are built very…
A coworker wanted this to attach on a bag. Very simple design but it's my first attempt at making a logo where the bottom layer is the colouring. Can be printed at 0.2mm layer height no problem, best to turn on “Avoid Crossing Walls” and…
An edited version of Patrun's Travel Salt Shaker with a mirrored main body for easier refilling of the salt/spices and a smaller sieve size to screw in perfectly. This way you can just unscrew the bottom and refill, instead of unscrewing…
Two versions, both based on Canilupus original version that both share that I made the original model taller then cut the hinges to give the print-in-place hinges more clearance as the original model almost didn't break free for me. Both…
Easy print PLA or PETG will work.
Mounting over one screw into the base Simply closed and opened with side feed Very strongly held, due to two reverse hacks Designed for three cable Also published here
To add to my red,yellow, and black alert signs, here is the Cloak Enabled alert as seen on the USS Dicovery in the 32nd century.
I wanted to change my Sony SS-CSE from black to white to make them blend in better with the room. The housing is simply covered in vinyl, but I modeled the grill to print it in white and cover it in cloth. Printed in PETG. Prints without…
The Enabled Controller is an open-source switch interface that enables adaptive switches and analog joysticks to be used with a compatible USB device such as a computer, tablet, or phone. The device accepts up to 8 adaptive switches (3.5…
When you are working with expansions like the Incognito that need the expansion cover removed to change the CF card you have to replace the cover every time so that the cartridge bay can be closed and the power can be turned on. This…
Colorprint recommended.
Made it to scare away wild boars. Super bright if LED voltage is cranked all the way up so careful around public roads and stuff. Simple print with almost no supports needed and cost should be around 20$ Parts list: Pir sensors 3pcs:…
SwitchBot Curtain Ramp - For Extendable Curtain Rods This allows the SwitchBot Curtain to move between extendable curtain rods with varying diameters without getting stuck. Background Let me start by saying that SwitchBot support is…
Printables edition of the models found on this Instructables post .
Hello After having seen here and there that there was a fire risk to let a printer work alone (which I do very often), I looked for a solution that could warn me even if I'm far from the laboratory. It suffices that the process stops for…
A minimal stand to hold the SwitchBot "Hub Mini" and "Hub Mini Matter Enabled" in a vertical position on a desk or shelf. Two versions, one with two screw holes 80mm apart. No supports needed. Print as pictured.
This project integrates: BME Temperature/Humidity Sensor LD2410C LiDAR Sensor WiFi-enabled ESP32 Designed for smart home integration - instructions provided below are intended for use with Home Assistant with ESPHome. The enclosure is…
for the print with the clip I recomend to remove infil for the clip part to make it able to flex enough to be inserted recomended layer hight 0.2mm
The Wooden Horse of Troy, reimagined as a little rolling treasure box. Pull it along on four spoked wooden wheels, then swing open the hinged door in its back to reveal a hidden compartment inside the belly. Pure Odyssey / Iliad lore: the…
For Pokemon livers and people who like Master Pokeball.
use supports on drawers slides use brim on mid slides some lube on slides helps a lot ;)
Print with suppots. Pls like and post makes. Good luck!!!
Hello, Sharing my project of unopenable piggy bank. It's pretty simple project and there is no opening anywhere, so the money thrown inside is stuck there forever :) Dimensions: 60x60x101mm 🚀 Want to sell prints of my models? Subscribe to…
I designed this enclosure to contain a Raspberry Pi 3 and a Waveshare GNSS HAT based on MAX-M8Q. The enclosure provides for ventilation on top, bottom and one side, exposes the Micro USB and Ethernet ports, but covers others that are…
A minimal stand to hold the SwitchBot "Hub Mini" and "Hub Mini Matter Enabled" in a vertical position on a desk or shelf. Two versions, one with two screw holes 80mm apart. No supports needed. Print as pictured.
Another Portable Drill Press, designed around the makita drill XPH07Z . It can be used with a vacuum pump to hold the position, even horizontally. The base can be used to drill round stock with its vee-groove. Makita small router base…
An edited version of Patrun's Travel Salt Shaker with a mirrored main body for easier refilling of the salt/spices and a smaller sieve size to screw in perfectly. This way you can just unscrew the bottom and refill, instead of unscrewing…
This project integrates: BME Temperature/Humidity Sensor LD2410C LiDAR Sensor WiFi-enabled ESP32 Designed for smart home integration - instructions provided below are intended for use with Home Assistant with ESPHome. The enclosure is…
Brittle Gum Benchworks’ (BGB) remote controller uses an ESP32 CYD (cheap yellow display) as a remote controller for classic Bluetooth enabled robots like BGB’s QB and HP Robots’ OTTO, and it will work with any Bluetooth Classic (SPP)…
Printables edition of the models found on this Instructables post .
more recent version: https://www.printables.com/model/1083785-robot-hand-v2 A robot hand: print in place, but posable via the embedded tightening screws. Slice with standard Cura PLA 0.2 mm layer / 0.4 mm noozle. No brim, No support…
[update 2024-01-01]: i have fully redesigned the joint, now it is easier to print, the connection to the ball is stronger, and the screw is better too. I have not updated this model with it yet, i plan to do it in the coming weeks (also…
