398 modeli
I found this jig made from wood on my trip to Japan twenty years ago in the alleys of an electronics market in Shibuya, Tokyo. I thought why not share with you the little tool that has served me well for years. Model 133 x 17.5 mm Bending…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
A handy resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes: A 6.3 mm spacing slot – ideal for standard 1/4W Arduino resistors A 10 cm gap – useful for larger power resistors or…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A handy dual-sided resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes two bending options: 6.3 mm spacing slot – ideal for standard 1/4W resistors and common Arduino projects…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
3D-printed Metal Bending Tool for Sheet Metal fitting for a Heuer Front 120 vice. Tested with 1mm aluminum and 0,8mm steel - I didn't see any wear on the tool parts during bending. Printed on a Prusa Mini in PET-G with 12 perimeters and…
Wydruk około 21,71 €–26,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bending machine for making brass rings for telescope eyepiece holders. I have introduced an improvement in some of my adapters for 1.25 eyepieces to T2 thread, available here in PRINTABLES. (see:…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aufgrund des großen Volumens der Arbeitsschüssel des Bosch Cookit ist der Versuch, kleinere Mengen sehr fein zu mahlen nicht immer zufriedenstellend. Mit diesem Zubehörteil könnt ihr das Volumen auf knapp 1 Liter reduzieren. Der Arbeits-…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Brake line bending tool that's designed mainly for the classic mini cooper front subframe nearside, where the line needs to perform a fairly tight bend very close to the fitting. I found that most standard tools on the market have a very…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Ein einfach Werkzeug zum Messen von Spiralen in einem Snackautomaten. Das lästige messen mittels eines Zollstocks o.ä. entfällt damit. Folgende Größen können damit gemessen werden: 11, 18,5, 25, 30, 35, 40, 45, 55, 65, 77, 80, 85, 95,…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Quick & dirty simple diode jig for 8mm holes. Accepts 10 diodes at a time. Insert diodes into holes, bend by hand. Fold diodes flat and cut to remove tape. Originally designed for building the split keyboard ErgoDonk Zero .
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
Condescending Wonka Meme Made with gwen image edit : Huggy Face and Flux 1 dev upscaler. x2 before the gwen and after. Tripo for image to 3d generation. Using gwen image edit is slick you can put the incomplete pic from the meme jpg and…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Je to ochrana před úrazem elektrickým proudem při práci v rozvaděčích. Zabraňuje náhodnému dotyku propojovacího hřebenu ze strany.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a simple screw-like extending pillar, with a rotation locking slider for locking the height.
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The material, when printed from PETG, is safe in the Cargille imaging oil. The black ink when printed from black PETG does not leak out. I printed it without support for the spikes sticking out into the agarose, but the two vertical bars…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 25th June: made the keyring hole a bit bigger, fixed issue with orientation: apparently the model was rotated a bit upon export to stl Description: Redesigned RCM jig, based on thing 2877484 but redesigned from scratch with…
After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…
With these 3D-printed tools, you can create strong and long-lasting springs yourself! — not only for the Wire Stripper Pro ( https://www.printables.com/model/1482697-wire-stripper-pro-functional-maker-tool ), but for many other projects…
This is a coin operated vending machine designed for fun-sized candy bars. It takes American quarters or the included discs of the correct size. Use the key to unlock to door on the back to restock the machine and access the coin drawer…
Bender Bending Rodriguez mini figure in 1:10 scale. EDIT: If possible, use upgraded parts under remixes tab. It took four redesigns for limb parts (and shoulders, and hips). And the final ones are not the best. Strength is good, but wear…
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
Ascending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…
Tool to cut and bend wires for use in a breadboard. To use the the tool: Count how many holes are between the two nodes you wish to connect (including the nodes themselves) Find the equivalent number on the tool. Cut the wire to that…
An all in one needle cutting guide and bending tool for redfoxdude 's popular Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool . It's uses the needle length (35/25mm) as the reference, so it's compatible with both the…
Descending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…
Open source 3D printed vending coin machine! This modular coin mechanism accepts a single 3D printed coin and allows a single rotation of the output shaft. This should be fairly tamper proof but you should still keep in mind the physical…
A design for a vending machine I made that accepts American quarters and dispenses cards in a card sleeve. There is a model to accept 1, 2, 3, or 4 quarters, although I think the 1 quarter model is the most reliable. Check the…
Biegevorrichtung für Widerstände, Dioden, etc. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Filament: Anycubic PLA green Category: 3D Printing
The design is based of a tool thats been around for years. Its printed from PETG with 4 walls and seems to hiold up well for coat hanger wire. The four holes are for short pieces of 1/4 steel dowel for bending more intricate shapes. Print…
Description I present to you my slightly larger project. It is a simple mechanical vending machine. All parts except the coin selector are printed. In addition to the coin, it is also possible to use a token, which is also in the project.…
P320 FCU Bending Kit (Work in progress) Machine: Klutch 3-1 Manual Brake Press This project is under construction and as I keep tweaking and testing, this will be my landing zone for uploading files and keeping the most current, tried and…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Are you a grow-er, not a show-er? It's a bit cold out there, huh? REAL cold, I hear. Well this is one giant collapsible beat-stick that WON'T leave you hanging. It can extend, collapse, uh... well that's about it, but it looks sick as…
The model comes with: One-piece main figure Separate surfboard Separate base Dimensions as shown in the photos. Resize if necessary: If you need to change the size, make sure to adjust all the pieces equally to maintain proper…
Easy to print. Can be made in pla, petg or abs. Can be scaled to desired size.
Similar to EKWB modulus tool, 14mm version. For bending PETG and acrylic tubing for water cooling PCs. Print out of ASA or something even more temp resistant.
This jig create bends from 2 to 24 mm in +2mm increments which fits perfectly on a breadboard (holes are separated by 2.54mm) I recomment printing with 0.25 nozzle, but have a try in 0.4, it's a quick print anyway.
Updates These are the changes I made to the instructions: I changed the part numbering to match the part splits. I added some steps for the new parts needing glued together and pushing out the deliberate support in the mouth of the body.…
If you want to bend acrylic tubing, i recomment to print it in ASA/ABS for better heat resistance. For acrylics, i had the best results with the 35mm bend radius and round walls, but 30mm works, if you heat the acrylic well. If you feel…
Key from serial and comics Locke & Key
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full Futurama collection here: Futurama DeskBuddys – Full Cast Collection by CheekyTomato | Printables.com More added regularly until even the most…
Monster standee replacement for the board game Gloomhaven. Standee Count: 6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Check out the awesome remixes of…
This is the model (from 3dsMax) for the new Nuka Cola vending machine in Fallout 4. I have uploaded this model on request - if you are going to build one by your own feel free to share the pictures! Print instructions Category: Video Games
This is a customized version of the latest Bambu Lab X1C startup and end G-Code. It removes all unnecessary calibration steps and allows for prepare times of around one minute from start to the first line printed. I mostly design small…
Similar to EKWB modulus tool, 16mm version. For bending PETG and acrylic tubing for water cooling PCs. Print out of ASA or something even more temp resistant.
Printing advises: Print with brim 0.25 mm nozzle is best layer height >0.15 mm Print in orientation shown on picture 3
Always the right length! Compared to a common bending tool this adjustable one can be set to the wanted length. It can form long wires for breadboard use as well. Even diagonal connections with unique lengths are no problem. A paper about…
Very simple design: this jig allows to bend quickly and repeatedly diodes for the Redox keyboard PCB. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 150µm…
Because I couldn't get consistent results I designed this easy to use die to bend the brake tube around. It works a treat! I've download other peoples files and I'm happy that I can pay back with a useful design of my own :) Here's the…
Simple 2 Part Model designed in FreeCAD, There is a lot of room for improvement. Feel free to Remix. Print Settings Layer Height: 0.20mm Filament: PLA or PETG (both tested by me, but any material should work)
This a model of a japanese distributer. There is a STL with all préassemble composant and there is all the composant if
Organize Your Creative Space with the Perfect Brush Caddie! Keep your workspace neat and efficient with our 16-Place Small Blending Brush Caddie—designed for crafters, artists, and makeup lovers who demand both functionality and style.…
A very simple tool to help bend THT components in shape.
Falcor the Luckdragon is sculpted in a dynamic pose, soaring through textured clouds. His furry body curls with that familiar gentle elegance, while the cloud base adds movement and height. This 3D model captures his whimsical grace,…
Find out the stiffness of your printed materials. This is a three point bending test jig. Video on YouTube: https://youtu.be/te0Wwf7Dxj4 Category: DIY
Here I share a bending tool for you. I use this for example voltage regulators and transistors in a TO220 case. With this tool you can bend every pin in the same angle an distance.
combination of the origiinal diode bender and the lead bending jig :-) If you like my work and would like to support me, please consider donating to my tinkerfund - http://paypal.me/sabitech2k
Sometimes I need a tool for bending small sheet metal parts. You can buy these bending tools but they are expensive. And making is more fun then buying. So I made a bending tool for fine sheet metal parts. It is fully printed and you need…
Shot glasses with diffrent volumes. (see models) Don't drink under 18!! (or 21 in America) If anyone has any questions please contact me, THop3D
Vending Machine Keys Category: Machine Tools
Brittle filaments will break inside those teflon tubes if they are bended too much. With this equipment, we can have measured numbers. This tester will be regularly used on the MyTechFun channel (with brittle filaments). If you add a…
Introduction If you have ever seen a video from CNC Kitchen or are interested in materials testing, you have probably heard of a 3-point bending test (see Wikipedia ). It can be used to analyse the stiffness of materials. For this, a…
Imported from Thinkverse without modifications. All credits goes to user Kest430 . The rock ascending is too steep for electric train! I printed with little support, but it's probably not necessary. Infill: 20%
print settings infill- 20% supports touching build plate brim use glue to attach two sides together, easy to print.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and…
Sturdy version of a key, which is used to shut off the alert system of some vending machines. Original ones cost around 10 € + 25 € shipment and they use to break quickly.
A small tool to bend the legs of DIP ICs (7.62 mm) packages to the grid size. It's a JIT project, so I didn't put much emphasis on user friendliness, a bit fiddly but it does what it's supposed to, maybe it's helpful for you too :) It's…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Similar to EKWB modulus tool, 12mm version. For bending PETG and acrylic tubing for water cooling PCs. Print out of ASA or something even more temp resistant.
This bracelet bending tool can bend up to ~2mm (14 gauge) aluminum, copper bracelet blanks and other metals… Print and add to your Cricut / laser arsenal of tools, or fix your own bracelet… Note: > Print in a tough filament such as: ABS,…
Hello a short upload from my side :) A small piece to guide a plant towards a direction and spread its canopy (aka Low Stress Training) Scaling should work fairly easy. No special needs in terms of material, infill, layer height. One…
I have created this kit for bending 16x1.5 mm steel tubes building a frame for saddle bags for my motorbike. You will find the possibility to bend 8mm, 10mm, 12mm, 16mm tubes with different radius and I have also added the FreeCad files…
The C legs of the relays in our ABB SAH/S KNX switch actuators has 6.35 mm spacing. Unfortunately the manufacturer does not provide a bus bar so we have to join the C legs with wires. This tool is designed to make our work easier: the…
A vending machine with magnetic assembly. Magnets for this scale are 6x 2.75mm (6x3 neodymium magnets). Shelves on the inside allow for easier glue-in of optional content (not included). Contact me if you need a different license :)
10cm vysoký Bender
Yes! It's yet another Bender from Futurama. This has been done numerous times before, but none of them were to my liking, so I created a completely new model. Bonus "blueprint" included! I also included a stand for the model. The model…
✨🐍 A little piece of Fantastica, made with care and brought to life by you 🐍✨ Some objects are more than just things we can hold in our hands. They carry memories, feelings and entire worlds within them. For me, AURYN is one of those…
By request on the r/functionalprint subreddit, one of my more effective-yet-arguably-unnecessary designs. Original post here . First up, credit where it's due; much of the CAD work was derived from the stellar TUSH FT ‘Fat Tracks’ Spool…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D Introducing the Parametric Bending Gauge for Electronics—a versatile tool…
Just made the model solid. Still a great movie. Watch it, if you can. Category: Props
Just a tube bending tool I designed for a Berd Air system. All the ones I downloaded and tried either failed partway through a bend or just failed completely. So I took principles from commercial tube bending tools and designed my own,…
This is a remake of the pipe bending tool from EKWB.
Parametric extending print-in-place back scratcher
Model generates a template that you can 3D print to lay out cuts for bending a rectangular tube. Rectangular tube will have a nice outside radius and is guaranteed to fit together tightly for easy welding. Fusion 360 model is fully…
To the winch, wench! 8x3mm magnet to be glued in. Example print used 15% infill, but…we don't care whether or not we care. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile…
I needed to bend the leads of a lot of through-hole electronics components such as resistors and capacitors before soldering for a project I'm working on, so I made this tool to speed up that activity. The holes of through-hole components…
Based on the excellent #NoWalls dungeon tiles by TheRooster, and the OpenForce Half Height Spiral Stair with only minor adjustments to reduce complexity Category: Toy & Game Accessories
I really enjoyed designing my Spitting Drake, so I made a Rending Drake to match! I figure that the Rending Drake and the Spitting Drake are probably closely related species, so I figured that I'd move this guy one step closer to his…
Bender with exchangeable eyes (3 sets, normal, angry, sad) and two mouths (with and without cigar) Held in place with Harbor Freight Magnets - https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html Video of design process of…
Works fine with both acrylic and PETG tubing, easy to use, perfect 90 bends. 2cm bend radius.Enjoy
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces
The kegland nukatap mini and flow control disconnect is a pretty cool little widget, but flexes way too much in stock form. This brace clips straight on and reduces almost all the flex. I also tried a top pin - had a 2mm bicycle spoke…
Kit to build a vending machine for Hershey's Kisses, easy assembly. Takes nickels, quarters, and 20 Euro Cent coins. 0.20mm layer height 0.40mm nozzle 15% infill no supports Print all parts together or separately. Snap out the wall…
Low poly Bender I made for the Low Poly contest. Scaled down 66% for printing, .2mm layers with tree supports.
Three level Blending Brush Holder using lazy susan (https://www.printables.com/model/815431-mini-turntable-100mm-lazy-susan) by logical planet. Includes internal storage. Caddy inspired by Honeybeestamps Blending Brush caddies.…
This is for custom watercooling tube bending with acrylic or PETG, allows you to get a 90 degree bend with a 25mm radius. This was made to fit 14mm tubing, I have not tried bending a smaller tube on this. I printed it in PETG and it…
Hard tube Bending Jig for 14mm Pipes
Now you can have your very own Brendan S.C.S.M, complete with decals! The standard size Brendan comes in at is about 1:16-1:15 in scale, meaning your 4-5" figures are perfect for displaying along side him. If you are printing this Brendan…
This is a bracelet bending block to bend flat strips of metal into cuff-style bracelets. The larger circles are for a wider, bend in the middle and the smaller circles are to introduce the bends on the ends to wrap around the wrist. I…
