679 modeli
This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. If you would like to donate, please do it to the author of the original model as he…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
I made this model because I’m really pretty picky with the type of paper I use for my notebooks and sketchbooks so I made the Hexbook one with interchangeable paper. no print support needed. Print the cover 2x, spine 1x, clip 4x. The…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
OpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Overview Simple yet effective fletching jig that will adjust to all your needs. Intended to provide new archers with access to 3D…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As the Sketchfab store is set to shut down in just days, we're facing an uncertain future. In a few months, it may become impossible to share 3D models freely. This community holds a special place in my heart, and I plan to continue…
Wydruk około 5,52 €–6,75 € nettoWstępna wycena jednego wariantu
Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator : Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
This is my ring MEOW.
Wydruk około 5,55 €–6,79 € nettoWstępna wycena jednego wariantu
This is a holder for the Ketch Karbonate (specifically plastic 26" model ) fishing ruler that attaches to standard kayak accessory tracks (specifically for my Native Watercraft Slayer Propel 10 ). Disclaimers: I cannot guarantee that the…
Wydruk około 4,66 €–5,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for a ketchup bottle that fits bottles made by Idun (Norwegian company). Store the bottle up-side-down to make it easier to empty. Can of course also be used with similar bottles. I've printer this with PLA. Features: Stores the…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
Angle 25°, 75 massage points, non-slip surface, easy grip, tread surface 250x290mm. material PLA, PETG no supports
Wydruk około 47,63 €–58,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A neat and tidy way to store all my takeaway ketchup sachets for use later
Wydruk około 9,04 €–11,05 € nettoWstępna wycena jednego wariantu
Stretching Cat model with demonstration gcode for proper support. Remix of content prompted by @Senk_3022469 .
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Overview This art deco style etched vase has very thin walls but don't let that fool you into printing in vase mode, because it's not quite doable. I've included a couple different versions so you can pick whichever speaks to you: Low…
Wydruk około 4,35 €–5,31 € nettoWstępna wycena jednego wariantu
This design has complex geometry reminiscent of an old lantern. Rotate it - it looks different from every angle! With my settings, it weighs almost nothing. This is the second in a series of four lantern ornament designs. This season, I…
Wydruk około 4,14 €–5,06 € nettoWstępna wycena jednego wariantu
a rocket benchy
Wydruk około 1,49 €–1,83 € nettoWstępna wycena jednego wariantu
Introducing the Hellmann's Ketchup Bottle Stand – optimizing your dining experience. Fed up with the wait for ketchup to reach the nozzle? This stand turns the bottle upside down, ensuring instant pouring from the nozzle. No more delays.…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Nice place to hold your pens, etc.
Wydruk około 10,64 €–13,01 € nettoWstępna wycena jednego wariantu
Rotate the ornament - it looks different from every angle! With my settings, it weighs almost nothing. This is the first in a series of three lattice ornament designs (no tree topper so far). This season, I plan to publish one Christmas…
Wydruk około 3,91 €–4,77 € nettoWstępna wycena jednego wariantu
Had some trouble with wrapping that's why the box has the pattern on top and bottom.
Wydruk około 3,86 €–4,71 € nettoWstępna wycena jednego wariantu
Jednoduchy držiak malej stretch baliacej folie do jednej ruky. Pri balení si môžeš brzdiť odvijanie palcom ruky aby bola folia pevne napnutá. Pri vkladaní rolky stlač spolu k sebe rozdelený koniec držiaka a nasaď rolku. Tak isto aj pri…
Wydruk około 6,09 €–7,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
set of 4x, 100x160mm signs; reading "Aberrantly Alliterative, Obstinately Obfuscatory, Serially Sesquipedalian, Persiflage Perpetrator". Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included…
Wydruk około 1,66 €–2,02 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “tis the season for Stretch Pants” with art of a stretched happy face. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames ,…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
We got a used smART Sketch 2.0 projector, but the battery door was missing. This replacement door was modeled using measurements only of the main unit and not the door itself. Printing Orient the print standing up, with the narrow portion…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stretchy Springy Ghost Toys STL files included for three ghosts: (1)Big Ghost (2)Medium Ghost (3)Baby Ghost Dimensions of Big Ghost: 3 in. x 2.5 in. Dimensions of Medium Ghost: 2.5 in. x 1.5 in. Dimensions of Baby Ghost: 1.5 in.x 1.25in.…
This fully print-in-place fidget boasts a variety of shapes for a satisfying squish and squeeze experience. You can choose between a circle, a triangle and a square. Print Settings: Make sure you have a lot of bed adhesion because the…
This is a scan of a small cat statue in a stretch pose. The statue was constantly being knocked off the window sill by our real cat who apparently didn't like the competition. The statue had some damage, so I repaired what I could and…
Simon's cat figure, scratch version and stretch version. Can be use as fridge magnet by glueing a magnet to the back. I'm a big fan of the Simon's Cat Cartoon. If you don't know what it is, check it out: https://simonscat.com/ Thank you…
Update 11 November 2023 By popular demand, I have a created a variation that hold CFA sauces on one side and their uniquely shaped ketchup packet on the other side. This is a sauce cup holder designed specifically to hold Chick-Fil-A…
Keychain from game Minecraft Sword Axe ... - SketchUp 8 + stl + gcode (Ender 3 v2 Prusa Slicer)
The Voronoi Stretching Cat is a beautiful 3D model perfect for pet enthusiasts and those who appreciate contemporary art. The design employs a Voronoi pattern, which creates a mesh-like structure that is not only aesthetically pleasing…
This model is suitable for a Prusa Mini, and prints easily with no supports and (almost) no infill. Printing details are at the end of this description but first: SIZE Two models are attached in Small Size (EU size 54 and up), and Large…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Fidget Stretchy Flexi Squeeze Thingi I had no clue what to put into the searchbar for this toy. So I made it myself. The slats are very thin and short, so you may need a few tries. You may need to adjust the temperetures of the headbed,…
Stretchy, Springy Pumpkin Toys STL files included for two pumpkins: (1) Big Pumpkin (2) Small Pumpkin 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great No Supports needed. 15-20% Infill Dimensions of Big Pumpkin: 3.25 in. x 3 in…
This design is based on a size 10 UK shoe size but can be used for smaller.
Baseball Caps Insert| Hat Shaper |Cap Liner| Ball Caps Form| Hat Stretcher I used 10% infill PETG Once done printing take the print off the build plate and start molding to the inside of your hat. The build plate is still hot so be careful.
I designed this snap-on gadget for Norwegian (Idun) ketchup and mustard bottles earlier this summer. I use this snap-on lid a lot and it makes it so much easier to balance the bottles on its head so I can easily use all of the contents.…
Stretching cat phone stand, designed to hold a large phone the gap is 14 mm. Printed with supports, but I think if you drop the model 1mm under the build plate it would be possible to print without. I used a model from Cults3D ( Free STL…
Cat Ring Holder I made this for my girlfriend and I think there are many other girlfriends of 3d printing nerds like me that would enjoy it :") It can hold many things: Rings, necklaces, watches, glasses (if scaled up big enough). The…
This is the second in a series of four spiral ornament designs. With my settings, it weighs just 7g. This season, I plan to publish one Christmas ornament a day. Follow me to stay up to keep up to date. I originally printed my stretch…
Compatibility: GalaxyWatch_2-3-4_CatStand_V1 (33.66mm charger puck): Galaxy Watch 2 (not tested) Galaxy Watch 3 (not tested) Galaxy Watch 4 GalaxyWatch_5-6-7-8_CatStand_V1 (29.33mm charger puck): Galaxy Watch 5 Galaxy Watch 5 Pro Galaxy…
Plate for french fries and ketchup Sizes Plate width 215mm / ketchup section height 52mm / plate height 47mm No supports needed Any convenient materials
Designed from scratch with thinner vanes and a 3" deep hole to fit a 5/16" wood dowel (Home Depot). Vane is about 3 3/4" long. I recommend increasing printing flow to 102% as I've experienced a bit of underextruding. I recommend attaching…
Stretchy, Springy Candy Corn I included 2 STL files of this Candy Corn. One file has “more spacing” between the layers so they are easier to separate. But I also included a file with “less spacing” which is a little more work to separate.…
Designed after I 3D scanned a wooden cat model. Made in ABS. How I Designed This Step 1 Obtain materials Obtain wooden cat model Retrieve Projector Get noise pattern picture Procure camera Download VisualSFM Download Meshlab Download…
Stretchy, Springy Snowman Included are 4 files: Large Stretchy, Springy Snowman Small Stretchy, Springy Snowman Hat_Large Snowman Hat_Small Snowman 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great No Supports needed. 15-20% Infill…
A remix to add stands and stability to use this awesome design as bookends!
Remixed the original file into a low poly version. No supports needed, but printed with a brim to help support rear legs.
Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…
Stretcher bars for embroidery/needlepoint canvas. Use tacks to pin the canvas around the frame like you would with wooden stretcher bars. Use four bars to make a complete frame. Features Stretcher bars from 4" to 10" (in 1" increments)…
Nemesis Retaliation board game insert/organizer using the core box and the sangrevore expansion box. The sangrevore box holds all the enemy miniatures. The core box holds everything else. The insert supports the following: core box…
SG90 Servo Motor
Love is in the air! these earrings shaped like doodled hearts are a perfect way to say that. Perfect for Valentine's day! Edit 2024/02/11: We've added a smaller version of the earrings. They are not just scaled down, the wall thicknesses…
This is a remix of one of my own designs, Cat stretch. I reduced the cat mesh to a lower poly count, and then copy rotated them into 3 positions forming a circle, and then rested a nice sized (almost 8" in diameter) dish balanced between…
This was modeled after a real side handle. I've included some small supports in the main body. PETG or ABS is recommended. I printed them at 0.2 layer height and oriented them as seen in the last picture.
Fletching Jig for 3 vane arrows. I need a true helical jig and wanted it to be small enough to pack away. Uploading full Fusion 360 file for you to play with parameters (in images). I have added files for 4" vanes, 0.2875" shaft, 4 deg…
Single piece haunted mansion gargoyle. Note that the model is front heavy and needs to be secured by glue or other means to attached surface. Also included single piece base with drywall screw keyhole and single piece base with no…
Your BOOST helps me continue creating unique designs and share even more free models for everyone to enjoy! 🚀 Meet the ultimate snack-time companion – a hot dog that barks instead of sizzles! This cute little pup is curled up inside a…
Why? This is a small tool made for sliding onto your arrows so you can use a mechanical pencil or marker to draw lines for attaching stick-on type fletchings, such as XSWings, Spin Vanes, Spinwings etc. Parametric There are two example…
Created for a crazy cat lady in my life, this holds a 70cl bottle of wine in a stylish way. Printed on an Elegoo N4Pro at 0.2mm, 3 walls, 10% gyroid. Added manual tree supports on the cat's undercarriage for safety but would probably be…
Stretchy Hexagon Fidget – FREE TO SELL!! This is a super stretchy hexagon fidget that’s crazy satisfying to pull, twist, and flex. It’s designed to print strong while still being flexible, giving you that perfect bendy, fidgety feel. Even…
Fletching jig for original Ek Archery 7.5" Adder Crossbow Bolts by Joerg Sprave (2 Vanes). Print: 1x Base 1x Arm_A (or Arm_A_0.3_Offset) 1x Arm_B (or Arm_B_0.3_Offset) 2x Lever Parts needed: 3x M3x30mm Screw FH 3x M3 Nut (recommended…
I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design. Having no goose feathers on hand, I figured a 3d printed one could be a decent alternative. Upon searching I found a cool idea by Tal84:…
Simple print, no support. Item should be short enough to allow a bottle to bottle contact minimizing food from touching printed surfaces. This works on the large Heinz bottles and I am sure a number of other containers you can find in a…
Photo etch bender In modelling, photo etch is widely used for upgrading models. Often, these parts need to be folded accurately. Tools for this can be bought, but we own a 3d printer so we can print them ourselves. I designed this model…
This is a mostly 3d printed fletching tool. Suitable for fletching arrows with 3 fletches. The frame is based on 20mm by 1.85mm flat Aluminum stock from the hardware store. The spacing between components can be adjusted to suite your use…
I couldn't find any individual fletching models anywhere so I decided to design my own. Can be glued to an arrow using super glue or fletching tape. I have NOT tested it yet. Print Settings Printer: Ender 3 Rafts: No Supports: No…
Scale záchranářské nosítko 1/10 podle předlohy reálného nosítka. Rozměry 218x62x3
Based on native wood carvings. Check out all my animals! Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Upside down bottle holder for your ketchup, mustard, burger dressing, remoulade, etc. To be used in the refrigerator and/or at the dining table when barbecuing. The holder only adds 0-2mm to the height of the bottle (depending on brand) -…
my fanwork of the dungeon & dragons Dretch. Category: Toys & Games
This model was inspired by the “single extruder -dual color” contest and Rossero. The original model was a scan by blu3lit3 on thingiverse. I remixed that to make the tail better. And then this remix is for the contest. The stretching…
I bought a kit (yes, that kit found also on Amazon) containing plenty of ear stretchers but when I reached size 6mm I noticed that the next piece was 8mm. I created a 7mm and a 9mm stretcher. You can use the o-rings from the kit. The…
Recommend printing on side, with brim enabled, but no need for support structure. Feel free to scale it down a bit if you want.
Растяжитель для широких ботинок. @Напильники для двух размеров обуви: клиновой и соединительный. @Я использовал широкую шайбу 8 и винт с потайной головкой DIN 7991 М8х100. @И два винта М4х30 . @Есть напильник под болт М8х90 с шестигранной…
Saw the Voronoi Cat model and thought it was well done. Saw where someone else made bookends out of it but did not include the extension that lies underneath the books. I changed the bookend base to include the extension and raised the…
3D PRINTING SETTINGS: PLA works best. Layer height 0.2 mm 15 % filling No supports required The slicer shows a lot of warnings, please ignore that. The program detects the distance between the individual layers. This "space" is wanted and…
Made a stepped holder for the SKETCH line of Copic markers, can hold up to 50 markers and can be wall mounted via key holes in the back. No supports needed, would recommend a brim.
Fletching that fits a 7.9mm (5/16") rod perfectly. Vanes are slightly (2 degrees) angled for speed and accuracy increase. Works great - have been tested. Print Settings Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0.2mm Infill:…
So i remixed a version fo the filament sensor holder by Štěpík. I modified because I have bondtech extruder and orginal one wouldn't fit on the bondtech. Also I made extension and added second screw so that the filament sensor would't…
Because the commercially available tools for this job (meassuring bolt stretch while torquing bolts during assembly of an engine) are quite expensive and we already had a micrometer gauge at hand - i decided to go ahead and just print…
Dimensionally accurate model of an etch a sketch
Chuck-It launchers use their own crappy sizes. This can be used to replace the Pro Launcher XL ball. The factory ball is terribly made. It NEEDS to be printed using TPU - which is animal safe. Scale to 75mm & it should fit just right. It…
I was really interested in the Calfpro and the positive reviews it’s received. However, at over £100, it’s more than I’m willing to spend. So, after spending a couple of hours in Fusion360 and using the information I found online, I’ve…
This model is easy to print and requires small supports on base. The articulations are designed to come out clean even on basic printers, making it great for both beginners and experienced makers. Video :…
Hat Stretcher worked great, but having the layers the same direction as the threads could case layer separation if screwed too tight. Merged the screws into one model and made it so can be printed horizontally. Worked well for me. This is…
Here is a cute articulated stretching cat! The spiral body design makes it flexible and super satisfying to play with as a desk fidget toy. ⚠ Printing Tips (Important!) Supports: YES, REQUIRED. Due to the overhangs on the chin and belly,…
Come and get your favorite demon, the Dretch! There are 2 files uploaded. One has custom support for easy printing, and one without support (for resin). The model was made in Blender and is used for 28mm scale table-top gaming.
A nice little tool to help you mark the position of your 3 arrows, at 120 degrees from each other. There is a nocking point within, so that your cock feather is perfectly 90 degrees from your string! Fits shafts up to 9mm diameter, and 4"…
