468 modeli
I remodeled the chassis of the Ferrari 575 GTC LM04 Evolution to fit the digital decoder (26732). Update 1: Improved model printability, removed Magnet tray between Motor and Decoder. requiered parts: Ferrari 575 GTC LM04 Carrera digital…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Don't forget to like and check out some of my other models.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
The vertical graph y = f (x) is rotated around the x axis. Volume of the rotating body: The used function: (0.05 x^2 + cos(x) + 2) / 2 : x ∈ [0, 10] (cm) V = 119.94 cm^3 The function is written on the bottom of the vase. I made it for my…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Eevee and all her evolutions, all scaled and with organic supports (PrusaSlicer 2.6) all setup. These are excellent models and perfect for painting. They are approximately 38% of the original model size, and have been simplified to ~60k…
A great Wall Art of the Evolution of Star Wars Droids. Do not forget to upload your makes, thanks ! Inspired by a sticker “Evolution” Wall Art Collection : Lego Minions Darwin Alien Rabbids (Les Lapins Crétins)
A great Wall Art of alien's evolution. Do not forget to upload your makes and LIKE the model, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker “Evolution” Wall Art…
Update 26.05.2024: Added version for 4-color multicolor print (AMS & MMU). Summary This is a model of a Mitsubishi Evo 4 (Lancer Evolution IV) in a kit / gift card style. Some characteristic details can be discovered. Equipped with…
A great Wall Art of the evolution of Lego's character. Do not forget to upload your makes, thanks ! Inspired by a sticker “Evolution” Wall Art Collection : Minions Star Wars Droid Darwin Alien Rabbids (Les Lapins Crétins)
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Update 2023/09/18 Version without a visible logo/name added About this project I designed this airbrush stand to fit into my workspace, following my design style and passion for hexagonal shapes. As I have a Harder & Steenbeck Evolution…
The four year old design has been remastered for greater driving precision, faster printing and 97% less support material. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have…
For fans Digimon series, Angemon Evolution. You can add some Led Light, in your Digivice base. Sculpting, creation idea by me. Hope you liked. Thanks
The design is fully tested but the documentation is work in progress, Please message if there any queries. Last edited 24\09\23. Attribution & Credit to the Voron Design Team I am not quite sure if this can be classed as a formal remix…
I resized everything to 150% of the original design. This included properly resizing some of the components included in the Remix, such as the rocker covers, intake manifold, and display stand. Everything has also had an appropriate…
This is a remixed version of an airbrush holder. Base was shortened to allow brush to sit in holder, cup resting fully against front edge, with a rigid hose that drops off edge of table surface. Added curved edges on main body. Opened…
After 2 long hard years of service I decided my HEVO needed some TLC. Within the refurbishment I Klipperised the HEVO so I also had to revise my Electronics Enclosure design. The wire management of the HEVO is so much easier without a…
Minecraft Evolution sign Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
Starwars evolution - wall art, easy to print
Thin Strip Ripping Jig. Make repeatable thin strips using this Thin Rip Table Saw Jig. To set it up, install this jig in your table saw miter slot, and simply set the thickness of the strip desired. Measure the distance from the outside…
A great Wall Art of Minions evolution. Do not forget to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a drawing “Evolution” Wall Art Collection : Lego…
Please click ❤LIKE❤ if you appreciate my work 😊 The rally legend – now on your wall. This 3D printable model of the Mitsubishi Lancer Evolution V is a tribute to one of the most aggressive and iconic 90s performance cars. Wide fenders, a…
Nom de la Collection : Évolution de l'Emblème de Batman Description : Plongez dans l'histoire emblématique du Chevalier Noir avec notre collection de douze magnets qui célèbrent l'évolution de l'emblème de Batman à travers les décennies…
Runner for the ‘t-track’ of an Evolution Rage 5-S table saw. Can be used as the base for mitre jigs, sleds etc. Two versions provided - 7.5mm sits just above the bed, 7mm just below depending on the need. Evolution tools are not known for…
UPDATES Update June ‘25: I have created some alpha track parts which have the “teeth” on the hub, instead of the track. This is in the “tracks-HubsWithNubs” folder. This uses my narrow track and hubs which directly attach to motors. The…
3D Printed Lancer Evolution Shell
A set of evolutionary skulls 3D scanned from replicas. Great for educational discussions in evolutionary change. Another great addition to this set: Taung Child Skull by @Radiolab Category: Biology
Zero Clearance insert for the R225 mitre saw from evolution power tools. It has a dust box on the bottom with an opening at one end. This prevents dust from falling out the underneath of the saw and encourages dust to be flung up from the…
Print w/ supports Commercial use NOT allowed!
Thought it'd be fun to show arrow keys some love. In most games I use IJKL to move, but back in the day, most games used the arrow keys (besides WASD) for important controls. Printing - For the Standard Version, best with a resolution of…
A fully modular curve library spanning radii R0.25 through R10— not offered by Carrera off the shelf—so you can expand your track possibilities well beyond the commercial range. Each radius pack contains: Inner & Outer Borders : Snap-in…
This is a custom-designed wall holder for the Powrtouch Evolution Caravan Mover Remote , specifically model PE0A2211048 AUTO (CDFMC Motor Mover). I made this because I couldn’t find a decent wall mount for the remote — so here’s a clean,…
I made this awesome pokemon keychains. Use AMS or layerpause. Enjoy! For commercial use. If you make a ton of money with it we are super happy for you, but also think about us. You can donate some to our account on paypal. So we stay…
Bookends in shape of man evolution theory.
This model recreates the iconic Mitsubishi Lancer Evolution VI as a high-detail exterior-only shell — ideal for 3D printing, display projects, or RC car body swaps. Designed with accuracy in mind, it captures all the distinctive Evo 6…
This is a Hueforge STL of an Eevee/Flareon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
This is a Hueforge STL of an Eevee/Umbreon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
This is a Hueforge STL of an Eevee/Sylveon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
SINCE THINGIVERSE IS KINDA HALF-DEAD RIGHT NOW, HERE ARE THE PICS: https://i.imgur.com/eeRiB8r.jpg https://i.imgur.com/b4p8imW.jpg https://i.imgur.com/tnWlnFg.jpg https://i.imgur.com/Oef3bQ0.jpg https://i.imgur.com/gMHWRQW.jpg TL;DR: This…
A great Wall Art Rabbids (Les Lapins Crétins) Evolution. Do not forget to upload your makes and LIKE the model, thanks ! As it is very thin and tricky, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a…
i hate documentation, will do later
espero les guste este modelo que remixee para poder imprimirlo, denle like y guardenlo, signame para ver mas modelos 3d geniales, graciaaaas
This model is an XCOM: The Board Game insert that fits both the base and expansion games into the base box. If you've owned this game before, you'd know that is cardboard insert that comes with the game is terrible and doesn't even fit…
This is a Hueforge STL of an Eevee/Leafeon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
Mitsubishi Lancer Evolution VI, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm…
This is a Hueforge STL of an Eevee/Espeon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
This is a Hueforge STL of an Eevee/Vaporeon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a…
I liked the emergency stop paddles I saw on other table saws, and I wanted one! I have made one with two parts. This has an attachment fitting, in which the inner surface is shaped to match precisely the piece that it is mating to. It can…
Light cycles from Tron: Evolution Category: Vehicles
Can be easily scaled for other evolution saws Concentrates suction and improves dust collection
Replacement parts for Nacon Revolution Pro 2 Controller. Trigger R1, L1 Trigger support R2, L2 Print instructions Category: Electronics Summary Replacement parts for Nacon Revolution Pro 2 Controller. Trigger R1, L1 Trigger support R2, L2…
This is just an adaptation using Tinkercad of the part designed by DropdeadFredd. I needed it to be 2.4 mm longer and 0.6mm thicker to have an almost perfect fit, so I did just that. Thanks DropdeadFredd for the original files. Printed…
This is a Hueforge STL of an Eevee/Jolteon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print with the STOP label face down. I printed it with 0.28 layer line, but any standard PLA settings is fine, on any slicer you prefer. I printed it multicolor on an X1C + AMS qith Polyterra red and white, and it is so good that it looks…
I suggest you print it like this: Top and the Bottom part Then measure how long arm do you need in between. The lengths are measured from hole to hole. There are different lenght arms, because the length depends on your pedal holder…
2/2/22 - I've added two .3mf files which contain my complete printer settings for printing the frame in Taulman Glass Alloy, and XT-CF20. As well, there are two .3mf files containing my settings for printing the canopy in TPU, and PCTPE.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Assembly instructions: https://www.youtube.com/watch?v=iwBxOFVILhs&t=15s The revolutionary 3D printed RC car design featuring the Subaru Outback is an innovative project that utilizes cutting-edge technology to create an RC car that does…
Chaos Magic Reality Warping - Wanda's unique mutant ability allows her to harness and manipulate the force of probabilit
llavero realizado en pla. boquilla 0.4./0.20
“The Carnation Revolution, also known as the 25 April, was a military coup by left-leaning military officers that overthrew the authoritarian Estado Novo government on 25 April 1974 in Lisbon” ref.:…
This is a Hueforge STL of an Eevee/Glaceon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a layer…
Crown cap for an Iwata Revolution BR Print instructions Took some experimenting with settings to get this to print OK Things worth trying to get good slicing/printing results: 2 layer raft, instead of a brim Reduced external perimeter…
The Hook and Loop contest inspired me to solve a problem I've had for a long time, how do I mount my bike lock? This is a very popular lock, even recommended by the lock picking lawyer, so I was very surprised to find that there were zero…
Coasters of Five Pokemon Evolutions Shown In Coaster Form Pichu-Pikachu-Raichu Ghastly-Haunter-Gengar Squirtle-Wartotle-Blastoise Charmander-Charmeleon-Charizard Bulbasaur-Ivysaur-Venasaur May Require ‘Print Thin Walls’ On Due To…
This is a Hueforge STL of an Charmander/Charizard Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with…
Lock Token for board game Zombie Kidz Evolution instead paper one. Print instructions Printed with 0,4 mm nozzle, 0,15 mm layer, Do not forget to set color change(M600) for color print. Try to print with 0,25 mm nozzle.
Description Useful of you need to keep track on how many turns you made on a shaft or want to remember setting to quickly tune back to previous value. Knob is directly connected to shaft and follows 1:1. Counter tracks knob revolutions…
8/1/2025 Added updated part cooling duct. (Part Cooling Duct V2.stl) Easier print and better air flow. 9/28/2019 I've installed this on my Hypercube Evolution and it is working well. I ordered my first spool of flexible filament and can't…
The Golf Cart Cup Holder Adapter fits the small cup holders on EVolution Golf Carts, or any other similar cup holders. The adapter accepts up to 3.5 inch diameter cups in the original 2.5 inch diameter cup holder.
A cap for the Harder and Steenbeck Evolution and Infinity airbrush to protect the nozzle and needle. It fits very snug. If you are looking for more organized Airbrush storage, check out my Airbrush Storage system . Check out my other…
A detailed model of a revolutionary war era cannon.
Be careful not to strip the threads!
Kryptonite Evolution Mounting Bracket that fits onto the drink holder. Example bike is a Tenways CGO600. Printed in ASA on a sidewinder X1 with a 0.6mm nozzle.
WallArt Badminton Evolution
Babylock Evolution Waste Bin This is a re-upload. I've needed supports at the bottom corner. Printed on Elegoo Neptune 3 Pro & Prusa Mk4
This is a Klicky Probe Mount for my Hypercube Evolution refurbishment build. This is a Step file only upload. Please note the Hot End Probe Mount is specific to my Mini Boothy Hot End so may need some revision to suit a stock HEVO hot end…
This model is inspired by organic forms and patterns, designed using a growth algorithm in Grasshopper to create a natural, evolving shape. It's optimized for 3D printing in ' Vase Mode ' or ' Spiralize Outer Contour ' in slicing software…
Epic evolution of Luffy ( file is ready to print ) U can swap last layer to change colour of the frame Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used by me: SmartMaterial3D PLA recycled Black…
Over time I received some requests for providing a version of my well-received airbrush stand that supports some kind of clamping or mounting mechanism. With this remix, I am providing you with a solution that enables you to create…
This mask fits neatly inside a NexStar 6 Evolution and is easy to remove. Focusing works like a charm with an astro camera, takes out the guess work of lucky imaging. I've created the shape on this site:…
This camera mount keeps the aftermarket camera centred and out of the way of the number plate.
As shallower spools tend to slip of the bearings, I decided to redraw chanders Spool Holder and add a third bearing. So even smaller spools stay in place. The pin holds the bearings in place. I used these bearings, they work well…
End-caps for Revolution EXP kite handles that double as line winder With those, you can easily wind up yourtr lines at the end of a session while keeping them attached to the kite Heavily based on the original Revolution caps…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
As others have confirmed, the Evolution Mitre Saws have rubbish dust collection. This builds on others ideas for the saw cover, now to find - or design - something that goes behind the fence… I found that normal supports work better for…
An option to securely hold the Carrera Evolution/Digital 124/132 track together. I use these to hold sections of track together and the standard Carrera ones to join the sections so the track be taken apart in sections I used a 2.6mm wide…
A evolution Mega knight from Clash Royale. Please like!
Remix of the 255mm version for the 210mm and complete by the other necessary junctions. Use a 32mm suction pipe for the internal diameter and 41mm for the external.
Height is 2.6mm, in my opinion looks the best when placed on wall. You can make it larger or smaller, but I assume 2mm is the lowest you can go in height. Prints flat on a 256x256x256mm plate. I oriented it diagonally on the plate to make…
This is for the 10mm to 8 mm XY Joiner. I have included step files for the parts if you require to create a 8mm to 8mm derivative. My stock XY Joiners on my Hypercube Evo build started to split under the tension of the drive belts and the…
1st generation starter Pokemon. Charmander, Squirtle, Bulbasaur
Halterung Kryptonite 2130 Evolution Da sich die original Halterung ständig löste, und ich sie öfter wieder festziehen musste, habe ich eine eigene entworfen. Zudem muss ich das Schloss nicht mehr entriegeln, und kann es mit einer Hand aus…
This 3D printable object is a switch cover for an EVOLUTION RAGE5S 255MM 1500W MULTI-PURPOSE TABLE SAW. I was always searching for the small red stop button and needed to take my eyes off the workpiece which to me posed a serious safety…
3D PRINTING SETTINGS -0.4 Nozzle -0.2 Layer -20% Infill -No Supports
Here is a cool Wall art of Darwin's Theory of Evolution. Do not forget to upload your makes, thanks ! “Evolution” Wall Art Collection : Minions Lego Star Wars Droid Alien Rabbids (Les Lapins Crétins)
A storage for the Harder and Steenbeck Evolution airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…
