3875 modeli
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
Wydruk około 6,61 €–8,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
These are fast and easy to print. I have included a Mk3S gcode for a single and set of 6. The gcode is optimized to print fast... about 16 minutes. I recommend scaling Z to 80% for a more flexible ear saver. I have handed out about 300 of…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made this model from scrath with caliper measurements after I found a look alike model that didn't fit my snapback (the holes and pins were too small) PLA model with ironing to make the finish a little smoother. May require some cleanup…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
GoPro - Extender 50mm
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
Wydruk około 20,05 €–24,51 € nettoWstępna wycena jednego wariantu
Remix of smysnk 's toe kick clip, modified to fit the metal CAPITA legs. Following the advice of some YouTuber, I used the metal CAPITA legs instead of the standard plastic SEKTION legs. The metal legs are very sturdy and great, but the…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of https://www.thingiverse.com/thing:2064269 thanks to https://www.thingiverse.com/thegoofy/designs for the original design. I added 90mm to the base and sliding jaw screws to accommodate clamping larger items. The other…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
An altered version of the official Handy 2 extender making it easier to print on an fdm printer. I basically thickened the interface part facing the user with 1mm. The result is that breakage is less likely. The internal ribs were also…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4xM3 nuts and 4xM3x6mm bolts (best cap head socket screws) needed for assembly. After few test I found extenders wobbly, maybe trying print it with PLA will solve the problem. I'm still working on better version with supports to make it…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When securing cupboards to the wall, IKEA provide some adjustment but it can help to have more options when the wall line is not parallel. Fortunately I found a model already designed by @MotorboatMe_237913 so just needed to modify the…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
This is an extended cover for the Makita LS1219L. It might also fit for the Makita LS1019L, XSL06 or XSL08 but I didn't test this. I changed the Laser light of my LS1219L to a shadow line / work light using the instructions of pemphillips…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
print 0.2 layer height of finer tightening the thread will hold the pencil in place assembly see image's, 2 or 3 parts depending on your preference. the end cap slides on the half length and chuck screws on to the threaded portion.
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Collapsible, Extendable, Retractable Baton. It is a good toy and a cosplay option. The head at the handle is screwed. The material I used is PLA/PETG Basic…
Wydruk około 10,25 €–12,53 € nettoWstępna wycena jednego wariantu
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Diese Maskenverlängerung erleichert das Tragen von Gesichtsmasken (Covid-19). Sie schont die Ohren und ist angenehm zu tragen. Eine Seite der Maske wird in die Verlängerung geklickt damit beim Abnehmen der Maske die Verlängerung an der…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
This is a standard 12mm hex that is 2.2mm wider than a standard hex, with slightly more depth for the pin. I've printed this in both PLA and PETG. With PETG the fit can be tight due to the stringing, so a little bit of post processing…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
You need one extra M3 Screw + Nut (15-20mm long), one on each side, to complete it. It only works with liftet rear end.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
A useful end to get into tight spaces, print as many extensions to make it as long as you want. Great for sideboard, side of fridges, tight spaces… There are 2 parts, the base and the extenders. The Extenders push on and twist to lock on.…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
German Die Citroën C4 Modelle ab 2020 enthalten eine Tablet-Halterung . Mit dieser Halterung können aber nur folgende Tablets genutzt werden: Amazon Fire 7"-Tablet, Vexia E1, Vexia E2 Plus, Danew 1013QC, Apple iPad 7th Mit dieser…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
From my Google Lens search, it appears this handle fits between a 1994-2004 GMC/Chevrolet model vehicles. I made this handle from scratch. It took me about 6 prints to get it just right while also improving it so that it cannot break. You…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
I got one of these Beelink mini pcs to use for a plex server. It comes with an empty internal bay for a 2.5 inch hard drive, but there is extremely little clearance around it. The hard drive I wanted to add was apparently more rubenesque…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting. This model allows to extend and then tilt the light…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is holder for 5 pieces of TePe Angle Interdental Brushes, 10 pieces TePe Interdental Brushes and 4 pieces teeth brushes. NO SUPPORTS NEEDED!!!
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
These are 1x2 gridfinity modules. Their function is to be an angled baseplate. They are low, but they will still raise up any module on them as well as angling them forward. There are versions with angles in 5º increments up to 20º. This…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to extend the “additional feet” and chimney for the printer-box spool tank to allow more room between the Spool Tank and MMU. The filament has a smooth run between the Tank and MMU. The original model can be found on the…
Wydruk około 16,78 €–20,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed this model from the excellent design by Kai. I have included the hooks from the Thingiverse design by CSD_Salzburg for convenience. I like the design and used it for some time, but I needed something that could fit a bigger…
Wydruk około 5,06 €–6,19 € nettoWstępna wycena jednego wariantu
I used the 46 cm model MicroSD extender from www.aliexpress.com/item/32875435875.html?spm . The model now fits the micro 3d card reader extender tightly, wasting less material in the process and printing faster. Also, I changed the holes…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
You need just one hook to hang a ceiling light and at least three of theese stand-off sets for leveling. I use a cable tie to hang a lamp in one point (between the lamp and one already installed ceiling hook), than I tie the cable tie. At…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Tray extender for Dolce Gusto Piccolo XS, for a better fit of certain cup sizes. Print with with 3 vertical shells and no solid top or bottom layer. Adjust infill to own liking. Model snaps in place on top of existing tray.
Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple music stand extender to support single note sheet papers. It grabs on to the music stand using a tightening nut. Printing Tips Easy to print. All parts already oriented for printing without needing supports. I printed all…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
extended the length of the original design by ~35mm, and added some more rounding and smoothening
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
I have always envied the look and functionality of the extended lanyard hook on the X9D. I stumbled across this design on Thingiverse and I had trouble printing it in PETG due to overhangs, gaps, and orientation issues, so I tweaked the…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are just hole insets of the “whack a mole CATtoy” for preventing the moles from being stuck when they are being pushed too far in. The extenders have cutouts for allowing the arms to go all the way up. For this reason I recommend…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
3 variants available: [wPlate] => Get SSR90 size with rubber butt cover ( Cover from AirsoftPro ) [Nature] => Get SSR90 size without the additional cover, provide bigger space [eone_remix] => Same sizes as enone version, just rounded…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This retrieval hook was designed to attach to a standard expandable painters pole available at most hardware stores. It was printed with PETG but other material would also work. It is a bit more flexible than I wanted but that does not…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
IKEA CITRONHAJ Spices Stairs These stairs are specifically made for the 20cm wide METOD Kitchen Cupboard with pull-out drawer Put these in the top shelf with 4 Citronhaj or print more of them :) Extendable Low Tolerance (0.2mm gap on…
Wydruk około 4,60 €–5,62 € nettoWstępna wycena jednego wariantu
A customizable xLCD mount for both Core One+ and Core One+ L printers. It can be printed on both as well, you just need to rotate the mount to fit the bed of the Core One+. It can be configured in multiple ways: Allow the install of a USB…
Wydruk około 5,64 €–6,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a simple screw-like extending pillar, with a rotation locking slider for locking the height.
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Longer bolt handle for the Nerf MultiTool by Doughtinator. Uses no additional hardware, and can be screwed on to either side of the bolt, same as the original part. I found that the included bolt “stub” part was too short and awkward to…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
This is a system for extending the height of a Premier One Poultry Fence. The fence pole extender is designed to clip tightly to the pole. Then insert a garden stake (I use 18" green metal-core garden stakes from Ace Hardware). Finally,…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
EN: Extendable telescopic stabilizing rod/tube/pipe for the "mini photo studio screen holder", print-in-place Redesign The "mini photo studio" with my Remix: https://www.printables.com/de/model/764195-mini-photo-studio-screen-holder-remix…
Wydruk około 4,87 €–5,95 € nettoWstępna wycena jednego wariantu
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
The reach of iFixit bit driver was not sufficient for my use. I created this extender to enable myself to reach to screws. I printed this with the 3 perimeters and 30% cubic infill. I printed it standing with the bit end down. I printed…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
I assembled the RP2040 ( SKU 1030018) with the additional header pins - this remix is to allow fitment of the board with extended headers. My application is more likely to get wet, so I opted to close off the light pipes. Recommended…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena jednego wariantu
I use some cheap PLA. this fits the pictured Intllab Magnetic Stirrer. I received it free, but I found it on Amazon with the same dimensions.
Wydruk około 6,12 €–7,48 € nettoWstępna wycena jednego wariantu
An extended version of my remix to fit the wise words of Reddit user SGrim01 “WTF is the *%*&% MMU doing now?” Added a blank version as well. I did not test this at all, so good luck.
Wydruk około 4,02 €–4,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mustool MT99 Multi-meter single cell LiPo / Lion Extended Battery Case. Parts USB 5V 1A Lithium Battery Charger Module M3 Button Head Screw 6mm Options (pick one or the other): Print both the Battery Cover & Battery Cover Template , then…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clothes hook has been lengthened, as this saves more space when the jacket shoulders are lower underneath each other. This suits my needs better. I hope others will too. Kleiderhaken wurde verlängert, da dadurch mehr Platz eingespart…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Was rotated 180* in Prusa Slicer. Print with flat part facing down. Its a relatively quick print and was made for the Velocifire Tenkeyless Mini but will work with other mechanical keyboards. It is elevated and when pressed sits perfectly…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Got a new keyboard did not like the height of the legs so i quickly designed some new legs, double the height. i made custom support on the round thing that goes in the keyboard that need to be snipped off with flush cutters or a file.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Mounting hardware for range extender of DualShock 4 controller with universal DS4 zip-tie attachment. The long range capability can be done adding RC joystick module from https://github.com/ctu-vras/rcjoy . System is fully see-through and…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by this version for the round baby mobile arm, I decided to make one that fit our square version. Designed in Onshape , feel free to remix. Printed in PLA with supports and low infill which works just fine!
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
V2: Stability improvements #1 main-mount - layerlines orientation Split main-mount into two parts. Print the two parts in different print orientations to prevent layerline stress in z directions #2 profile-mount - stability Increased…
Wydruk około 4,93 €–6,02 € nettoWstępna wycena jednego wariantu
I needed a small 7cm extender for a compact tripod i had, it was just that little smaller so i made this very basic one. Its niche but i hope someone might find it usefull. I printed it in normal pla Used https://bumpmesh.com to add the…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
You just need some rubber to get lock in place with regular car shade
Wydruk około 7,49 €–9,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made the extender by sinking the original in to the build plate and then increasing it's size. Next, I took the original and used it as a negative volume to empty out the inside so it can just friction fit on top. I did find that it was…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the Tzumi ionvac 3-in-1 design vacuum extender handle connector clip. When the clip is broken, the connection with extender handle could become loose. Print 0.4mm nozzle, 0.2mm layer height, 3 perimeters, 100%…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a TV mount for the OREI 4K HDMI over ethernet extender (model UHD-EXB400R-K). Print the model and use double sided tape to attach to your TV. Printed on a PRUSA Mk4S w/ MMU3 in Original Enclosure with Overture PLA. PLA, 0.35mm…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
This is an extender/splitter to allow four additional items to be hung from one hook (with the original hook still available for a fifth item). It was originally designed for Command Medium Clear Wire Toggle Hooks , but the model could…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
I made this SpiceShelf Extender to get a bit more room in my spice rack. It holds two small cylindrical jars and fits neatly into my store-bought spice shelf. Dimension of a jar: round about 41mm diameter, 77mm height Motivation: Our…
Wydruk około 2,54 €–3,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scame box 4003376 Extend
Wydruk około 11,87 €–14,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple light switch extension intended for those who want the longer reach for accessibility purposes but also want them to be decorative. Fits narrower light switches that measure from 6.5mm horizontally across at the tip to 7mm wide…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Twinny Load Easy is a nice quickloading bikerack for cars. However with racing/gravel bikes the slope in the top bar makes your front wheel hang too low and it hits the ground (speedbumps). This extender corrects that. It slides in the…
Wydruk około 3,99 €–4,87 € nettoWstępna wycena jednego wariantu
Building a large minifig wall meant that printing AJ Raceway's awesome hexagons individually was taking a little time. So I whipped up some larger options depending on the size of your print bed. You can now print a set of 3 or a set of…
This is an extended version of Tonyk's excellent Pokeball card box, for those with more cards (also fits sleeved cards). This version's roughly 3 times longer than the original, measuring ~178mm long. You need to print 2 copies of the…
If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂 https://ko-fi.com/vinis
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
Since the Jonsbo N2 originally only comes with a quite loud “slim” (15mm deep) 120mm fan in the back I wanted to swap it out for a quiet fullsize (25mm deep) fan. Unfortunately due to the very limited space in the back of the case this…
There are so many of these out there. The AAA batteries in others could get clogged. This should be fixed here. I modified this so that you could attach them side my side to form a block and allow for more storage. Mix and match as many…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
Redesigned the slot little bigger to fit more screw types. Prints flat & side perfectly if printer is fine tuned. Otherwise side printing would work. Offset pin/hole: 0.3mm circular Minimum Settings Recommended: 5 Walls, 5 Top Layers, 5…
I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries
all stock hardware. I used pps-cf filament but anything should work
This is a remix of “Laptop Stand” by finke. I really liked the original model, but added 15" computer support and some nice to haves like a stand version with no lip so you can close the computer and an optional connector for…
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
Extendable and modular stackable drink dispenser, multiple combinations and configurations in heights, levels, rotations, etc. Model measures The model is designed for the 66 mm diameter x 115 mm long can. You can make other dimensions of…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
It's an extender for coat hangers, to hang a coat hanger on a coat hanger to have a coat hanger chain gang of coat hangers. Print instructions Category: Household Supplies Summary It's an extender for coat hangers, to hang a coat hanger…
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
Extended/custom shaped barrel. No supports should be needed. Hope you enjoy. Included is the barrel latch, there was alot of play and lack of spring. Made latch catch a little thicker. I’ve uploaded my own version/custom form fit grip. It…
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
✏ Back to School with a smart and useful idea! How many times does a pencil become too short to hold comfortably, even though it still has plenty of lead left? With the Pencil Saver , a simple 3D print, you can give your short pencils a…
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
![94-04 3rd Door Handle for Chevy S10/GMC Sonoma Extend Cab [Handle Only]](https://media.printables.com/media/prints/222498/images/2035579_b4df1ecf-e043-47cd-ab54-777467923c9f/print-measurements.png)
