P
Printablesmouf
Locking pin for car fire extinguisher
Simple locking pin for smaller fire extinguisher. There is a hole for key ring to make usage reliable and easy in case of need. Print with supports.
- Pobrania
- 53
- Polubienia
- 9
- Ocena
- 4
Wyniki wyszukiwania: extingui
166 modeli
P
PrintablesTmnSn
CO2 fire extinguisher sign
A quick model I made for my fire extinguisher. Put a color change at 3.2mm (Layer 16 for 0.2mm layer height)
- Pobrania
- 44
- Polubienia
- 9
- Ocena
- 0
P
Printableskaje
Fire Extinguisher Hanger
A small (tank is 80mm diameter, 350mm long) fire extinguisher in my shop did not have any kind of bracket or hanger for wall mounting, so I made this one. Unlike some other 3D printed hangers which have bottom support, this hanger instead…
- Pobrania
- 40
- Polubienia
- 9
- Ocena
- 5
P
PrintablesTJL
Extinguisher45
I purely made this for as an entry for the contest. Designed with Tinkercad.
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHollaDaywalker
Automatic Fire Extinguisher Mount for Enclosure
This mount is for the Jogoswall Fire Extinguisher for on Amazon: Jogoswall Automatic Fire Extinguisher,Fire Extinguisher Car,Small Fire Extinguisher,0.24lbs,Car Fire Extinguisher,clean agent fire extinguishers (CAR,SUV,TRUCK) - -…
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0
P
Printableshangbar3d
Sodastream Extinguisher/ Instant drink cooler
Just screw the adapter on, and push the button. Attention: Be careful this is not a toy, it can get to extremely low temperatures.
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTJ
Fire Extinguisher
Non functioning fire extinguisher model. The head, shell, and nozzle print sepretely and can be screwed togeather.
- Pobrania
- 1123
- Polubienia
- 101
- Ocena
- 4,5
P
PrintablesIonNight
RC Scale Fire Extinguisher and Jerry can + case
Imported from my designs on Thingiverse. Original upload was 13.08.2018 (dd.mm.yyyy) Fire extinguisher and jerry can for your scale truck. I made this for my Scx10 8x8 Maz-537 project. Video below. Use support on the fire ex top and the…
- Pobrania
- 496
- Polubienia
- 66
- Ocena
- 5
P
PrintablesJoe
Fire extinguisher for dioramas or board games
Fire extinguisher model for dioramas or board games, etc. I've included some print sets for doing the Tank in a separate colour from the Hose & Handle.
- Pobrania
- 451
- Polubienia
- 67
- Ocena
- 0
P
Printableszeus
Customizable Ashtray with Cigarette-Extinguisher
i remixed the customizable ashtray from here: http://www.thingiverse.com/thing:316440/ i just added an extinguisher to the center. works like a charm and makes the ashtray much more durable, because of less contact with hot ash. the…
- Pobrania
- 389
- Polubienia
- 30
- Ocena
- 5
P
PrintablesPHIL Sherwood
1/10 Scale Fire Extinguisher for RC
Easy to print 3 part fire extinguisher. Nozzle fits into handle, handle fits into tank.
- Pobrania
- 280
- Polubienia
- 50
- Ocena
- 5
P
PrintablesJaco Wiese
wpl d12 jerry-can & fire extinguisher roll bar
Resolution: 0.16mm infill (%): 20 Support: Yes
- Pobrania
- 275
- Polubienia
- 30
- Ocena
- 5
P
PrintablesGlen Bayley
Fire Extinguisher Wall Mount (parametric)
This is a remix of @franktrebin‘s fantastic fire extinguisher wall mount. Massive props to him, it is a work of art. It's not only very functional and well designed for 3d printing, it's quite a sexy design too. It wasn't the right size…
- Pobrania
- 240
- Polubienia
- 44
- Ocena
- 5
P
Printablesanhaga
Fire Extinguisher Toy for Kids
Small fire extinguisher toy for kids. Assembly video: https://vimeo.com/764271995 Print properties: 0.20mm layer height Support for some parts Material: PLA/ABS/PETG Additional parts: M2 socket head cap screws 2-off M2 x 8mm to prevent…
- Pobrania
- 216
- Polubienia
- 56
- Ocena
- 4,8
P
PrintablesJan Kománský
Fire extinguisher
3d printable not working fire extinguisher
- Pobrania
- 196
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDusterLE
Dacia Duster 2 - Extinguisher holder
Printed from material PETG, 15% infill, 4 perimeters. You will need 4x screw M3x40 (Allen key), 4x nut M3, 1x screw M6x14 (Allen key) with hemispherical head and 1x nut M5
- Pobrania
- 170
- Polubienia
- 45
- Ocena
- 5
P
PrintablesBruno Germany
Fire extinguisher for the new Prusa Enclosure
The new Prusa case comes without a fire extinguisher, but I think it's a good idea to install a smoke detector and fire extinguisher directly into the case, especially if you're not always watching the printer. I used the "Fire Cookie”…
- Pobrania
- 167
- Polubienia
- 12
- Ocena
- 5
P
PrintablesBecker Thorne
Fire Extinguisher Signage, Glow In The Dark Background
Needed a Fire Extinguisher sign for my shop and modeled this up in AutoCAD. Printed with a glow in the dark PLA background and cherry red PLA for the artwork. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter…
- Pobrania
- 156
- Polubienia
- 42
- Ocena
- 5
P
Printablesfranktrebin
Fire extinguisher holder/ Wall mount / Wandhalterung für Feuerlöscher
In den Halter passt der kleine Schaumfeuerlöscher Reinold Max 750ml. Schraublöcher für 5mm Schrauben. Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: No **Resolution:** 0.3 Infill: 20% Cube **Filament:**…
- Pobrania
- 154
- Polubienia
- 12
- Ocena
- 5
P
PrintablesEnginetris GmbH
Fire-Extinguisher Mount
I've created that mount for a small fire-extinguisher (750ml, 76mm diameter) to be used in my workshop (in the near of my 3D printer), garage to mount a fire-extinguisher to my tool and gear wagon and in my camper van. I've created a…
- Pobrania
- 151
- Polubienia
- 30
- Ocena
- 0
P
PrintablesMrCitizen
Element E50 fire extinguisher mounts for 2019+ Jeep JL (seat and overhead/roll cage)
I bought an element E50 fire extinguisher and a lot of the 4x4 clubs require that it be “within reach of the driver” for quick access. I wanted to mount it to the lower seat but unlike my 2011 JK jeep there really wasn't anything to…
- Pobrania
- 150
- Polubienia
- 28
- Ocena
- 5
P
PrintablesSmiksky
Fire Extinguisher Pin Replacement
A 3D printable replacement pin with pull ring for fire extinguishers. I tried it on 3 different model extinguishers and it fit all of them, so it might be kinda universal. The pin is about an inch long, and about ⅛ of an inch across: I…
- Pobrania
- 145
- Polubienia
- 17
- Ocena
- 5
P
Printableshummi
Fire extinguisher (Feuerlöscher) velcro holder
34b Fire extinguisher holder for velcro tape to mount it on car interior.
- Pobrania
- 140
- Polubienia
- 34
- Ocena
- 5
P
PrintablesINVESTEGATE
BW24 Lösch-Cookie Halter Holder BW-24 Brandwaechter Automatic Fire Extinguisher
Can you no longer sleep well at night because you are afraid that the 3D printer will catch fire? :D Then we have the solution for you here! BW24-Cookie is an automatic, self-igniting powder extinguisher to delete fire. This bracket…
- Pobrania
- 138
- Polubienia
- 14
- Ocena
- 5
P
PrintablesPLAprinter
Extinguisher（generated by Revopoint POP）
This extinguisher model was made by Revopoint POP. If you want to get more models like this, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
- Pobrania
- 138
- Polubienia
- 18
- Ocena
- 0
P
PrintablesJoe
Birthday cake fire extinguisher - You never know when you might need one
Birthday cake fire extinguisher, plus a birthday sign. I've included a couple of print sets which let you print the Tank red and the Hose & Handle in a different colour such as black.
- Pobrania
- 135
- Polubienia
- 15
- Ocena
- 0
P
PrintablesWoom-E
Fire extinguisher
Please don't get it confused with a real one
- Pobrania
- 131
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMarkus Schmidt
Feuerlöscher Wandhalter / Fire extinguisher wall mount
Feuerlöscher Wandhalter Einen Feuerlöscher griffbereit zu haben ist beim 3D-Druck immer empfehlenswert. Hierzu habe ich einen praktischen Wandhalter gezeichnet. Er ist für Feuerlöscher mit einem Durchmesser von 74mm vorgesehen. z.B. für…
- Pobrania
- 128
- Polubienia
- 7
- Ocena
- 5
P
Printablescwwid
fire extinguisher wall mount
The holder was planned for small fire extinguishers, but it can also be used for spray cans and the like if the shape fits. Can be printed completely unsupported, but I recommend bracket support inside and below.
- Pobrania
- 125
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMeesterEd
108mm Large Fire Extinguisher Holder Bracket
Resized Fire Extinguisher or Gas Torch Holder by The_BeardBot to fit my larger 108mm diameter extinguisher. The screw holes sizes are in tact so the same hardware can be used. I just used some doubled up electrical tape for the strap.…
- Pobrania
- 116
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDot Dot Dash
Automotive fire extinguisher mounts
Simple fire extinguisher (80mm) mount for a trailers or in a car. holes are for am M5 button head screw. I used PTEG as this is going in a trailer that has temps that will melt PLA.
- Pobrania
- 114
- Polubienia
- 25
- Ocena
- 0
P
PrintablesLM
Крепление огнетушителя (fire extinguisher mount)
Заводское крепление безобразно и примитивно, так что сделал свой вариант. Для возможности модифицирования под свои нужды, добавляю файлы Fusion 360. Мой личный выбор вариант с сотами, тогда отпадает смысл в поддержке. И обратите внимание…
- Pobrania
- 112
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDaniel Kasprowicz
Car fire extinguisher holder
Car fire extinguisher holder A simple fire extinguisher holder under the driver's seat. Secure attachment and quick use thanks to the use of Velcro. Carrying it in the trunk is the same as not having it at all. With this holder, you have…
- Pobrania
- 98
- Polubienia
- 77
- Ocena
- 0
P
Printables-JKDev-
Fire Extinguisher (roleplay purposes)
Its a 3d model of a Fire Extinguisher meant to be printed for dollhouses etc..
- Pobrania
- 97
- Polubienia
- 14
- Ocena
- 0
P
PrintablesdaLutte
MR2 SW20 fire extinguisher bracket
You may have to split the part in the middle in your slicer, depending on your printer. This will not fit all fire extinguisher brackets, so you may need to change the hole location depending on your bracket.
- Pobrania
- 97
- Polubienia
- 7
- Ocena
- 3
P
PrintablesJohn S
Fire Extinguisher Mounting - 10 lb, 4.5" dia, (115mm)
Mounting for 10lb or 4.5" diameter fire extinguishers. The extinguisher snaps into the top clip and rests on the base. Print Settings Supports: No Notes: Print the bottom fairly solid near the wall as that is what is doing most of the…
- Pobrania
- 90
- Polubienia
- 8
- Ocena
- 5
P
PrintablesJeroen3
Fire Extinguisher wall mount
This small spray foam fire extinguisher doesn't come with a wall mount. So I made one. Complementary extinguisher: AngelEye from FireAngel. Please use this to make your home safe. Print instructions I'd recommend to print the bottom…
- Pobrania
- 90
- Polubienia
- 16
- Ocena
- 5
P
PrintablesJohnBenzo
Fire Extinguisher Sign
A multi-material print of a fire extinguisher sign. Check out my other signs: First Aid Sign https://www.printables.com/model/1160946-first-aid-sign Radioactive Sign https://www.printables.com/model/1160953-radioactivity-sign
- Pobrania
- 85
- Polubienia
- 11
- Ocena
- 5
P
PrintablesMeister Edel
Candle Holder with Self-extinguishing feature Experiment!
I recently designed a candle holder and had difficulty finding a suitable material for it, as almost any material will ignite in combination with the wax. But before I ordered expensive special filaments, I first thought about how I could…
- Pobrania
- 85
- Polubienia
- 29
- Ocena
- 5
P
PrintablesNiche Applications
Heartburn Extinguisher (TUMS travel holder)
Settings: .2mm layer height, 3 Walls, 3 bottom, 4 top, 15% infill (I used grid). Also, the bottle comes out really good if you use adaptive layer height . No supports needed.
- Pobrania
- 80
- Polubienia
- 28
- Ocena
- 5
P
PrintablesNononono
Lighted Nock Extinguisher/Arrow Puller
100% scale fits a Ravin Crossbow 400 grain arrow shaft. I put fuzzy skin on mine for extra grip and because I am a sucker for that feature.
- Pobrania
- 78
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDaniel Zhekov
Fire extinguisher nozzle
A replacement nozzle for mainly car fire extinguishers. The thread is M12x1.5 and should work on other fire extinguisher too. Nut is size 14. Inner diameter of the nozzle is 17mm. I would suggest printing at lower tempeture, because of…
- Pobrania
- 76
- Polubienia
- 9
- Ocena
- 0
P
PrintablesThe Reverse Engineer
Fire Extinguisher Pin and Quick Release Cap
Ever wondered why the pin on fire extinguishers are basically zip tied on? How hard is it to break in case I need the fire extinguisher in an emergency? Well I tried it and while it certainly is not extremely difficult, it was harder than…
- Pobrania
- 72
- Polubienia
- 4
- Ocena
- 0
P
PrintablesZfrenchy
Quick release extinguisher
Edit: Now two versions, screws or clamp mounting ------------------------------------------------------------------------------------------------------ A copy of a commercial aluminum quick release extinguisher, here…
- Pobrania
- 66
- Polubienia
- 23
- Ocena
- 0
P
PrintablesMacaroni Love
Holder for Fire Extinguishing Spray Cans
There's a version for use with peg boards. That one require supports for the pins on the back. (I probably exagerated quite a bit on the number of pins in the back. I wanted to be really sure it wouldn't break after a while since I…
- Pobrania
- 66
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRaphhorn
Yamaha Superjet/Waverunner Fire Extinguisher Cap
printed in PETG & TPU not 100% Watertight but it has a decent fit i uploaded the f3d file so if you edit it to be watertight may share a remix of this :)
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRT
Fire Extinguisher Mount
Clamp / Mount for fire extinguisher with a diameter of 68mm. Edit: I later realized how many different cans did fit the holder, I suppose 68mm is a market standard? Note, bottom part doesn't fit all cans (those with wide rolled edges,…
- Pobrania
- 61
- Polubienia
- 12
- Ocena
- 0
P
Printablesbinominem
Fire extinguisher sign | Brandschutzzeichen Feuerlöscher
Fire extinguisher sign | Brandschutzzeichen Feuerlöscher
- Pobrania
- 59
- Polubienia
- 5
- Ocena
- 5
P
Printablesejordan
Fire extinguisher holder for the trunk of a car
The holder is at a 20-degree angle, and for attachment in the trunk, adhesive hook and loop fasteners are required. Part of the fasteners will adhere to the bottom of the holder, and part to the side, where a flat surface is prepared for…
- Pobrania
- 57
- Polubienia
- 15
- Ocena
- 0
P
PrintablesRyan
Fire Extinguisher Sign
This is a fire extinguisher sign i modeled to be printed in 2 colors using a layer pause. I printed this on my Peopoly Magneto-X.
- Pobrania
- 56
- Polubienia
- 10
- Ocena
- 5
P
PrintablesLowPolyFigures
Low Poly Fire Extinguisher
Low Poly Fire Extinguisher
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 0
P
PrintablesWasha Baby
Fire Extinguisher Holder Wall Mount
Wall mount that holds fire extinguisher, designed around 1-A:10-B:C fire extinguisher. Snaps into place and holds Printer Anything that can print about 152mm x 37mm x 70mm Material Any (Probably not PLA if used outside in hot climates)…
- Pobrania
- 52
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPreischl 3D
Fire extinguisher stand
Fire Extinguisher Stand Hey maker! 👋 A simple and sturdy stand for your fire extinguisher. Features: Scaled for fire extinguishers with a 10 cm diameter, but can be easily extended. Keeps your extinguisher upright and accessible.…
- Pobrania
- 51
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMarco6158
Fire extinguisher support for Renault
Renault provides a fire extinguisher for new cars, however, it comes in a paper box and they provide no instruction on how to fix it properly so I made a simple support to store it safely in the trunk. Print in PETG or any other…
- Pobrania
- 50
- Polubienia
- 15
- Ocena
- 0
P
PrintablesIvan Vladimirovich
Fire extinguisher mount
.Fire extinguisher mount under car seat (for Haval H3). The mount repeat circumference of the fire extinguisher (ОП-2) and has holes for Velcro tape
- Pobrania
- 49
- Polubienia
- 7
- Ocena
- 0
P
PrintablesByteSlinger
Fire Extinguisher Stand
I invested in a fire extinguisher just incase the worst case scenario happened. This is a stand to keep it neat an safely upright. Designed to fit any extinguisher up to 104mm in diameter, this stand uses a 200mm squared footprint to keep…
- Pobrania
- 48
- Polubienia
- 11
- Ocena
- 5
P
PrintablesBraydl
Scale Model Fire Extinguisher
This is a 1/24-scale fire extinguisher designed for models such as cars or trains. This model represents a real extinguisher that is approximately 14 inches (350mm) long and 5 inches (132mm) in diameter. The STL file is divided into parts…
- Pobrania
- 47
- Polubienia
- 2
- Ocena
- 5
P
PrintablesPablo Fernandez
Fire Extinguisher Ball Holder for Prusa Printers
For those of us outside the EU (thanks Brexit), when we get the Prusa enclosure, we can't get the fire suppression system. I started searching for alternatives and I found the Mini Auto Fire Extinguisher Ball: https://amzn.to/415CXI9.…
- Pobrania
- 44
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLVLAsian
Chopper Extinguisher Mod
Chopper Fire Extinguisher Mod for MrBaddeley Printed Droid. Uses the upside down Dust Can method that does inside the Main Body See PDF for Instructions and BOM
- Pobrania
- 43
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLee David
A1 Fire Extinguisher with Flames
Just having some fun with the A1 cable situation, remixed a model from Thingiverse.com. Enjoy!
- Pobrania
- 43
- Polubienia
- 10
- Ocena
- 0
P
PrintablesPaco Rinalski
Storage bracket for Kidde FA110 fire extinguisher
If you lost your original factory-provided storage mount this is a good solution for Kidde FA110 fire extinguishers commonly sold for home use. It will fit any fire extinguisher that is 83mm in diameter snugly and securely, although it is…
- Pobrania
- 42
- Polubienia
- 11
- Ocena
- 0
P
PrintablesIgor
Extinguisher Spray Holder (universal size)
I had to make extingiusher holders for our workshops and rooms. Our "fire fight sprays" are 65mm in diameter, but you can easily rescale. I made it with 0,3mm layer thickness, 3 plies walls and 50% "triangles" fill. 5 sets took 5 hours on…
- Pobrania
- 42
- Polubienia
- 9
- Ocena
- 0
P
Printablesragnarokpw
Fire extinguisher container
When a firefighter friend has an upcoming birthday, what else to do then to design him a giftbox in a shape of fire extinguisher. Nozzle and handle are connected with printed thread, for the gauge assembly I did not want to make so small…
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJoker_G
Fire Extinguisher (Easy Home Cockpit Project)
Don't forget to like and comment. 3 options: pull to activate. pull and turn clockwise to activate. pull and turn counter-clockwise to activate. Material: 1x micro switches reference 10T85 When combined with one another models of this…
- Pobrania
- 40
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAndrew
Extinguisher holder 110 mm
Wall mount dioxide fire extinguisher with 2 kg of extinguishing agent. Diameter 110 mm. Weight of extinguisher 7 kg.
- Pobrania
- 39
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPedroKV
fire extinguishing spray holder-držák hasicího spreje
Fire extinguishing spray wall holder Držák hasicího spreje na stěnu Resolution: 0.25 Infill: 25% Filament: Devil Design PET-G black Notes: ENGLISH: For spray diameter 66mm No supports needed Holes for screw diameter 4mm. For embedding…
- Pobrania
- 39
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGemini Wing
Sleeve for Kidde 21028230 extinguisher to mount in Ford Maverick rear door bottle holder
I have the Mabett Door Side Storage Trays in my truck, found the extinguisher still rattled a little. If you don't have the storage tray insets you may need to expand the outer diameter a bit. Printed in PETG with 5% infill.
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 0
P
Printablesineiub
Fire extinguisher for cable management
This is a project that I made for menage the cable and power adapter for my sim rig. I think is a good idea to hide in a race style fire extinguisher. I designed this BOX especially for the SIMAGIC M10 power supply but is suitable for…
- Pobrania
- 38
- Polubienia
- 17
- Ocena
- 0
P
Printablesbydand
Mount / Holder / Fire Extinguisher
I needed this simply to mount to a couple of walls in my garage ! Print in PETG for solidity/longevity. Extinguisher Wall Mount / Holder. Support Murale pour Extinteur.
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 0
P
Printablesnozzleshift.com
Firesensor, Smokesensor & Extinguisher for 3D-Printers
How to add a Firesensor, Temperaturesensors, Smokesensor & Extinguisher to your 3D-Printer - Complete tutorial The print is not the main thing here, that I have for you. Instead I want to provide an easy to follow tutorial on how to setup…
- Pobrania
- 35
- Polubienia
- 10
- Ocena
- 0
P
Printablestns42
My Customized Fire extinguisher wall mount
Customized version of https://www.thingiverse.com/thing:454736 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=454736 Instructions Using the following options: extinguisher_diameter = 50 bracket_width = 4…
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 0
P
Printablesishikawats
Fire Extinguisher Wall Mount (OSEC 1kg)
Wall mount for a small fire extinguisher. The opening has a diameter of 87mm and fairly snuggly fits an OSEC 1kg dry powder fire extinguisher. Prints as two parts that are held together after screwing it to a wall.
- Pobrania
- 34
- Polubienia
- 7
- Ocena
- 0
P
Printables7VeoG33k
F-Exx 8.0C Car Fire Extinguisher Holder / Mount with Velcro
As the F-Exx 8.0C car fire extinguisher does not come with a mount or fixture i decided to design one to fix the extinguisher somewhere in the car. This is done via a velcro, which is super glued to the bottom of the holder. In addition,…
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 0
P
PrintablesStar Labs 3D, LLC
Fire Extinguisher Sign
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by…
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesInge
Bracket for fire extinguisher
I designed this on Onshape. Sliced with Creality Print 5. Printed on K1. I used PLA, 0.2 layers, 30 % infill, 4 perimeters, and slightly fuzzy skin, just because I like it. Add support for the overhang. Seems to work well!
- Pobrania
- 33
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMaker Maxwell
Fire Extinguisher Mount
This is a simple wall mount for a small kitchen fire extinguisher. It's designed to fit an extinguisher 3.25" (83mm) in diameter.
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
Printablesloidolt
First Alert AF400 Tundra Fire Extinguisher Mount
Simple mount for the cheap (but very useful) First Alert AF400 Tundra Fire Extinguishing Aerosol Spray cans that can be found in many places, amazon link below: https://amzn.to/3UasHcV This mount allows you to create an easy-access home…
- Pobrania
- 30
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBruno Germany
Holder for external fire extinguisher (1000 ml)
You can fix the holder with two screws on a surface. The holder is fine for fire extingushers with 7.5 cm diameter. You need some support material to print the holder (please see the attached pictures). The holder is designed with Fusion…
- Pobrania
- 30
- Polubienia
- 1
- Ocena
- 0
P
Printablesgokere
New Land Rover Defender cap for fire extinguisher holes
I dismantaled New Land Rover Defender Passenger side Fire Extinguisher. This caps for close the holes remaining.
- Pobrania
- 30
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPrinterman
Fire extinguisher holder
This is a holder for OSEC fire extinguisher 1kg powder. It fastens with two screws through 5mm screw holes. It took around 8h to print on my MK4. It should fit all fire extinguishers with a 86mm diameter.
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesShane Reetz
Fire Extinguisher Rollbar Mount for Element Fire Extinguisher (1.75" bar)
Print two of these two secure an E50 Element Fire Extinguisher to your rollbar. https://elementfire.com/products/element-e50 The clip has an internal zip-tie channel to secure to your rollbar.
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 5
P
Printablesgokere
New Defender Fire Extinguisher mod.
I absolutely love using 3D printing to tackle any issues that come my way! Recently, my wife complaining about the passenger-side fire extinguisher, so I decided to take it apart and get creative. I designed a fantastic mount for the back…
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCbesheff
Fire Extinguisher Wall Mount
Holds a standard 5lb fire extinguisher. Mine is printed in PETG with 1.2mm wall thickness and I am quite sure that it can hold substantially more than that. The extinguisher is actually quite stable without the support piece, but it is…
- Pobrania
- 27
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMeado
Fire Extinguisher Horizontal Wall Mount/ Quick Release
This wall mount design enables a 2kg fire extinguisher (~110mm diameter) to be mounted horizontally, ideal for fitting high up the wall of a van to minimize impact to internal space and ensure accessibility even when the van is heavily…
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMilos V.
Fire spray extinguisher holder
Printed from PETG, 3 perimeters, 20% infill, 0.25mm layer height.
- Pobrania
- 26
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDrewz989
Fire Extinguisher Safety Pins
Replacement Safety pins for first alert 10lb fire extinguishers. there 2 different ones. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Sculpto PLA Red Notes: the one with…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
Printablestytyk
Fire Extinguisher Candy Bag
trick or treating loot “bag” I made for my toddler prints in three parts, nozzles snap fits loosely into lid to spin freely, what toddler doesn't need a fidget toy, lid then threads into the base to close the loot bag Basic version with…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesEGB Falk Beger / BEGER-3D
Fire Extinguisher Handle for Beer Keg / Feuerlöscher-Griff für KEG Bierfass / Durstlöscher
🇬🇧 English version below 🇩🇪 Deutsch Brandschutz für die Kehle! 🍺🧯 Mit diesem Aufsatz wird aus einem schnöden KEG-Bierfass ein echter „Durstlöscher" . Ideal als Geschenk für die Feuerwehr, zum Kameradschaftsabend, Vereinsfest, Geburtstag…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
Printablestns42
My Customized Fire extinguisher wall mount
Customized version of https://www.thingiverse.com/thing:454736 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=454736 Instructions Using the following options: extinguisher_diameter = 70 bracket_width = 4…
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDombi3D
Magnetic Fire Extinguisher Cake holder
Easy to print magnetic holders for Fire Extinguisher Cake. I used 8x4mm Neodymium Magnets for them and printed with PETG. A quick video presentation about it: https://youtu.be/l2XKxQ-wWwA The product itself:…
- Pobrania
- 24
- Polubienia
- 13
- Ocena
- 0
P
PrintablesAndy
BRZ/86/FRS Fire Extinguisher Trunk Top mount
Printed 2 of these and mounted on the top horizontal brace in the trunk with 3M double sided tape. Purpose isn't to retain the extinguisher but keep it from moving around, extinguisher is held in by zip ties. Something strong enough to…
- Pobrania
- 24
- Polubienia
- 10
- Ocena
- 0
P
PrintablesGremmlings
Wandhalter für Feuerlöscher / Fire extinguisher wall mount
Halterung für Feuerlöscher / Fire extinguisher wall mount UPDATE 19th Sep 2026: English description Full parametric FreeCad file as download, to adapt to other Sizes. VarSet.Adjustable.InnerDiameter: Diameter of fire extinguisher (plus a…
- Pobrania
- 24
- Polubienia
- 8
- Ocena
- 0
P
PrintablesVlada Matena
Solo fire extinguisher wall mount
Wall mount for Solo fire extinguisher. Supports both double sided adhesive tape and screws. Prints without supports, but multiple perimeters are recommended. Printed from PETG 0.2mm later, 4 perimeters.
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printableskb
Adhesive Kitchen Fire Extinguisher Holder (5cm Diameter)
Tired of our kitchen fire extinguisher constantly falling over, we designed a compact and effective holder that keeps it securely in place. The holder is specifically designed for 5cm diameter fire extinguishers and can be easily printed…
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMDBDesigns
Fire Extinguisher Molle attachment
This is a Molle attachment for a small fire extinguisher from Amazon. I specifically modeled this to attach to a panel under my seat in my car, although this could attach to any Molle panel you may choose. The slots are 1" (25mm) wide by…
- Pobrania
- 23
- Polubienia
- 7
- Ocena
- 0
P
Printablestoni4u
Feuerlöscher Halter I fire extinguisher holder
Feuerlöscher Halter für Feuerlöscher mit 70mm-6'eck Boden fire extinguisher holder for extinguisher with an 70mm-hexagonal bottom
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNC Fabrikation
Ford Maverick FITS Under-Seat Fire Extinguisher Mount
This is a fire extinguisher mount that attaches to the FITS anchors under the rear seat of 2022-2026 Ford Mavericks. It is configurable to work on either the driver or passenger side of the truck, and the extinguisher bottle can be…
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLean 3D
Holder for fire extinguisher, 67mm ID
I used silicon at the back to support those two small screws to hold it firm. Actually, you should never hide your extinguisher, but as a compromise you can make sure you know where it's is. Every time you open the door you get the…
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0