66 modeli
This storage tray allows you to display 25 of your Filament Color System Chips (FCS) in Ikea's Skadis System. FCS Features Easily determine material and brand of past prints. Each chip has the brand and material debossed onto the top…
Wydruk około 13,79 €–16,85 € nettoWstępna wycena jednego wariantu
Used the original model as a baseline for the normal fins - thanks for the design! (original model: https://www.thingiverse.com/thing:1324570) Reduced the size to match the fins i already have and increased thickness, because they seemed…
This parametric box system was developed for the IKEA Skadis pegboard. With the help of FreeCAD , you can easily define and print the desired dimensions of your box or shelf. The design is compatible with the CSD_Salzburg system, ensuring…
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base…
Adapter to be able to use FCS fins in a NSP mini tuttle box. The adapter requires 2 5mm fin screws to secure the FCS fin in the box. Furthermore, a screw with 6mm diameter is required to secure the adapter in the mini tuttle box. Print…
Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Infill: 10-20%
Center fin for FCS 1 type surfboard setups. Other FCS fins are from the original post. ***For the easiest print have the print stand upright and have supports** One side of the fin looks a little weird but still works great and does fit…
Want to make your own? I have a FCS II geometry only file here A medium sized rear quad fin for use with the FCS II (FCS 2) fin plug system. Designed to be printed flat on its side and mirrored once to complete a rear set. I have tested…
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base…
Original Ender3 .f3d converted for FreeCAD
These two storage trays allow you to display your Filament Color System Chips (FCS) in Zack Freedman's gridfinity . Storage Tray Features 4x1 tray stores 20 FCS chips 4x2 tray stores 37 FCS chips FCS Features Easily determine material and…
This is a right fcs fin. You can flip it into the slicer to print a left one…
The Filament Color System (FCS for short) allows you to produce reference chips for materials you print. These chips are blank so you can customise them however you see fit for your needs. The standard color chips can be found here.…
A basic model of the FCS II (FCS 2) system fin plugs. I have used this in my own models when printing and trialling fins for my surfboard. This model is simplified to help with easy printing. One side will have an unavoidable bridge if…
Two designs of FCS softboard finboxes: One to be installed into the board and one to be attached onto the board - i.e. which does not require cutting into the board. For both versions you will need M4 screws and nuts to attach them to the…
The Filament Color System (FCS for short) allows you to produce infill reference chips for materials you print. Features Easily determine infill used with past prints. Each chip has the infill debossed onto the top face. Each chip is…
Dummy FCS2 fins to install fin boxes.
The Filament Color System allows you to produce color reference chips for materials you print and store them. Storage Box Features Store 50 FCS chips in a small space Chips are easy to remove Information on chips can be read without…
A range of custom FCS style surfboard fin plug to fit the original FCS type plug fins. Measurements were taken from some spare plugs that I have sitting around from a previous board build. I have uploaded a range of commonly used cant…
It includes four different adapter angles (0, 3, 5, and 9 degrees) to match any fin angle you need. This adapter requires 2.5mm fin screws to secure the FCS fin into the adapter. Additionally, a 6mm diameter brass insert with its screw is…
This useful tool is essential for precisely tracing your plugs' positions. Here is a short presentation of what FCS X2 plugs are: https://www.youtube.com/watch?v=MJtg7i9hM_s Here is a tutorial on how to use this marking template and…
To fix something around a screw rod M6円錐形化粧ナット 穴のあいているものをネジの中心に固定したいときに使います KnurledCone: insert an M6 nut DecagonConeNut: insert an M6 nut DecagonConeM6: already M6-threaded Tube-shape support materials are initially prepared in…
M27 / Reducer / Pipe reducer / Adapter / Fitting reducer
With this connector you can easily build your own boxes with MDF-boards 5mm. For printing you can try the part with integrated support, which can be easily cut off after printing.
Dummy FCS fins to install fin boxes.
Scale it 99-101% in x- and y-directions with your slicer to tighten or loosen it. It is a good idea to tap the thread after printing. ネジが緩すぎたりきつすぎたりする場合はスライサーでｘｙ方向に縮小または拡大するとよいでしょう。印刷後にタップでネジ穴を仕上げるのもよいでしょう。
The Filament Color System allows you to produce color reference chips for to label your materials. Label Features This bracket lets you use FCS chips to quickly label fillament in dry bins, on the wall or where ever you store them. There…
Subido en formato de Freecad para adaptarlo a las necesidades de cada uno.
My new Aiper pool robot vacuum has a knob that is hard to turn. I created a spreadsheet-driven FreeCAD file that created the perfect wrench for this. the design is flexible enough to use for other such applications
This storage trays allow you to display your Filament Color System Chips (FCS) in your ALCH setup. The tray is 50mm tall and was modelled from the ground up. It isnt an exact match to Alexander Chappel's design. Storage Tray Features 4x1…
FCSII Tab Infill Kit: This kit allows you to adapt your standard FCSI (dual tab) fins to fit FCSII boxes. It includes 4 different wedges (0, 3, 5, and 9 degrees) to match various FCSII boxes. Simply look inside your FCSII plug to…
This headset holder can clip onto all tables with thickness of 34mm. A FreeCAD file is included, so you can change the thickness.
Printing Instructions 0.2mm layer height, all including 1st layer. 15% infill grid 2 perimeters no supports letter face on plate ABS recommended (and tested) For convenience, a 3mf file for use with Core One is included. It contains all…
Instructions: To optimise for FDM printing, all fin files are a half cross section perpendicular to the z-axis. Pre-Process: Ensure filament is UV and water-resistant. Process: Mirror along the x-axis within the slicer before printing the…
The Filament Color System allows you to produce color reference chips for materials you print and display them. This is a simple stand to hold a single FCS chip in view of a camera or sight line. FCS Features Easily determine material and…
GoPro mount for Starboard iSUP FCS insert. Gopro Halterung für Starboard iSUP FCS Aufnahme. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 50 Filament: PETG PETG Category: Camera
Just a replacement part for an old Ferrari like Playmobil car (model 3708). Do you like my design? Print, upload your MAKE, receive Prusameters! Please leave a “like” …. ❤ Feel free to follow me …. ✅
Flexible paddleboard fin
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
The folks at Thrustmaster were gracious enough to give the T.1600M FCS system a pair of M6 bolts on the bottom of their HOTAS joystick and throttle combination. This is a big step up from the HOTAS X which was decent but had no way to…
Instructions: To optimise for FDM printing, all fin files are a half cross section perpendicular to the z-axis. Pre-Process: Ensure filament is UV and water-resistant. Process: Mirror along the x-axis within the slicer before printing the…
I was using the T.16000M FCS for space games, playing in dim lit rooms, and the LED light of the T.16000 felt distracting and at times irritating I am new at 3D designs, and thought that this could be a fun project to test my FreeCAD…
Passgenauer Adapter für den Einbau eines T16000M FCS auf Reyann Tischhalterung für Extreme 3D Pro Joystick Kompatibel mit Logitech G Extreme 3D Pro Joystick – Schwarz : Amazon.de: Games Die Platte wird von unten in die Tischhalterung…
Link to the base STL, STEP, and F3D files available for easy editing AFCS Panel printed in one piece with options to print in two for a hidden nut on the switch If printed in two pieces use M5*12mm button head screws to hold together…
Materials needed 10mm x 5mm x 2mm Magnets 2.2mm x 6mm Screws Stainless Steel Printing Instructions Layer Height: 0.2mm Material: PLA, ABS, ... 2 Perimeters 15% Infill Assembly Instructions Slide magnet into slot Secure with 2.2…
Took the amazing design by @mreece524_2887371 and made it compatible with the T.16000M FCS HOTAS, I tweaked it all to fit the Trak Racer supplied profiles I had left over.
NewScottie.FCStd is FreeCAD source. Adjustable parameters are in items of Top and TissueBox in NewScottie.FCStd, FreeCAD source. Default sizes are: Tissue box: 64.6 mm x 110.0 mm Line size: 4.4 mm x 12.0 mm Cabinet shelf thickness: 16.0…
This allows you to use the FCS camera mount on certain surf & SUP boards and attach a Gopro with a quick-release clip mount. There is a small slot in the mount to allow tightening of allen key nut. Printed from ABS 100% infill Print…
Print multiple at the same time. 2x left + 2x right Center fin no needed, as that is a small one.
RO: Emblema FCSB – Model 3D Model 3D al emblemei FCSB, cu steaua mare cu opt colțuri în centru, literele „S”, „F”, „C”, „B” pe crucea roșie și două stele deasupra. Un simbol ușor de recunoscut al clubului din București. EN: FCSB Emblem –…
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
A basic model of the FCS II (FCS 2) system fin plugs. I have used this in my own models when printing and trialling fins for my surfboard. This model is simplified to help with easy printing. One side will have an unavoidable bridge if…
Instructions: To optimise for FDM printing, all fin files are a half cross section perpendicular to the z-axis. Pre-Process: Ensure filament is UV and water-resistant. Process: Mirror along the x-axis within the slicer before printing the…
Instructions: To optimise for FDM printing, all fin files are a half cross section perpendicular to the z-axis. Pre-Process: Ensure filament is UV and water-resistant. Process: Mirror along the x-axis within the slicer before printing the…
Scale it 99-101% in x- and y-directions with your slicer to tighten or loosen it. It is a good idea to tap the thread after printing. ネジが緩すぎたりきつすぎたりする場合はスライサーでｘｙ方向に縮小または拡大するとよいでしょう。印刷後にタップでネジ穴を仕上げるのもよいでしょう。
Router jig for FCS fusion plugs: Ideal for routing your surfboard plugs! Available in two versions: one replicates the official FCS fusion router jig tool (and requires the official router bit), while the other is adapted for those, like…
Router jig for FCSII plugs: Ideal for routing your surfboard plugs! Available in two versions: one replicates the official FCSII router jig tool (and requires the official router bit), while the other is adapted for those, like myself,…
Router jig for FCS SUP handle: Ideal for routing your SUP board handle holes! This single version replicates the official FCS SUP handle router jig tool (and requires the official router bit and guide bushing). Attached with the 3D file,…
Router Jig for FCS LB 10,5" fin box: Ideal for routing your surfboard plugs! You will find two versions: the first one replicates the official FCS LB router jig tool (and requires the official router bit and guide bushing). The second is…
