Wyniki wyszukiwania: fiio

Sortowanie

152 modeli

P
PrintablesVlackRasberry

DT 770/880/990 Fiio BTR5 Clip

A simple clip similar to the one that comes with the BTR5 to mount directly to your headphones with no drilling required!! The clip simply wraps around the left cup arm and secures to the case with two screws. For this project, you will…

Pobrania
87
Polubienia
22
Ocena
5
P
PrintablesBerntzone

Fiio E10 Olympus DAC Desk mount

This is a simple under desk mount for the Fiio E10 Olympus DAC. Fixed to the desk using double sided nano adhesive that I cut into thinner strips: https://www.amazon.co.uk/s?k=nano+tape To keep the DAC from sliding out I just used a small…

Pobrania
30
Polubienia
7
Ocena
0
P
PrintablesI Do Thinz

Fiio Snowsky Echo Mini Case and Pocket/Belt Clip

Please use short (4mm) m3 inserts on the case to attach the clip on with m3x8mm screws. The bottom corner of the case is open so its easier to push the echo mini out of the case. The screw holes at the back are spaced 24mm apart so make…

Pobrania
788
Polubienia
44
Ocena
4,67
P
PrintablesJyoshiko

FIIO SnowSky Echo Mini Casing

Protection case for FIIO Snowsky Echo Mini, best to be printed in 0.12mm layer height. Included 2 design: Plain no symbol no logo with 0.2mm depth logo and symbol. No support needed as well, easy installation.

Pobrania
589
Polubienia
46
Ocena
5
P
PrintablesAshot Arakelian

FiiO FT1 PRO comfort strap

Didn't find anything acceptable and made my own version of comfort strap Printed from TPU 60D Print settings perimeters - 4/5 top/bottom layers - 0 fill pattern - honeycombs 30%

Pobrania
531
Polubienia
20
Ocena
5
P
PrintablesPrintyModels

Fiio CP13 Belt clip

!!! If you have a different model, let me know and I will see if I can make it !!! Hi! I designed this in my free time and would really appreciate it if you could leave a comment or share a make after printing it. It means a lot to me and…

Pobrania
303
Polubienia
11
Ocena
5
P
PrintablesHainsilma

FiiO K11 desktop mount

A simple mount to attach the FiiO K11 to my desktop. Screwholes 4.3 mm and countersunk, even though I used 3.0 x 12 mm to attach it. Print with tree-supports on the inside (less clean-up as the surface will be hidden by device itself when…

Pobrania
281
Polubienia
10
Ocena
0
P
Printableshcm3

Fiio M11 Charging Stand

Note: This will not fit the Fiio M11 Plus or the M11S. Only the original Fiio M11. (April 7, 2025) I designed a stand for my Fiio M11 that had a number of features: I wanted a charging dock style stand that would keep my M11 charged up…

Pobrania
251
Polubienia
19
Ocena
5
P
PrintablesZilcho

FiiO Snowsky DISC Case (w/ Optional Clip)

FiiO Snowsky DISC Case Design I made a case that fully encompasses the DISC, in 2 parts. I didn't like how the screen, which was vital to the usage of the device was protruded and exposed, so I made the front part with a simple raised…

Pobrania
251
Polubienia
5
Ocena
5
P
PrintablesToby B

Fiio K11 Desk Mount

This model allowed me to clean my desktop space and get the DAP/amp closer to my chair for more length with my headphones. Feel free to message if you find that it needs modifying and I'll see what I can do for you. Please note that the…

Pobrania
221
Polubienia
16
Ocena
4
P
PrintablesPeter

FiiO K7 Undermount

Wanted to undermount the headphone DAC so I didn't have cords running over my desk.

Pobrania
212
Polubienia
14
Ocena
5
P
PrintablesAccalia

Fiio BTR7 Clip Case

This model adds a printable shirt or belt clip for the Fiio BTR7 that allows one to wear the little bluetooth DAC that could clipped to your shirt or belt like the BTR5's included case can. The leatherette case that comes with the BTR7 is…

Pobrania
192
Polubienia
22
Ocena
3
P
Printablesdavid perreault

FiiO K7 undermount with lip

FiiO K7 undermount with lip

Pobrania
189
Polubienia
7
Ocena
5
P
PrintablesAerialFox

Fiio Snowsky Disc Case

A case for the Snowsky Disc, simple as that. Also a version with space for a magsafe ring.

Pobrania
174
Polubienia
4
Ocena
5
P
PrintablesTenocticatl

FiiO SNOWSKY Echo Mini

I wanted to make a case for my new FiiO SNOWSKY Echo Mini MP3 player, so I created a reference model to model the case around. Made with Fusion and calipers. The one that's named “raised_screen” has the active portion of the screen raised…

Pobrania
168
Polubienia
12
Ocena
0
P
PrintablesTridense

FiiO K5 Pro desk mount w/ Cable Management

Strong and practical under-desk FiiO K5 Pro hanger/ mount for your desk! Zip tie your power and audio cables to the hanger for cable management Screw holes are 90mm apart center to center Max screw width 5mm Max screwhead width 10mm

Pobrania
151
Polubienia
28
Ocena
5
P
PrintablesUnknown

Fiio K5 Pro Desk Mount

This is a desk mount for the Fiio K5 Pro, this model can be used for both regular desks and desks with frames underneath (up to 25mm). All that is required is to screw into the bottom of the desk and slide in the K5 (you may need to take…

Pobrania
139
Polubienia
10
Ocena
5

Under Desk Mount for FiiO E10K Headphone Amp

Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.

Pobrania
134
Polubienia
12
Ocena
5
P
Printablescursgroff

Fiio K5 Pro Under Desk Mount

Below desk mount for the Fiio K5 Pro Dac/Amp printed on an Ender 3V2 using Sunlu PLA A basic model of the k5 pro is included for ease of use when remixing Installation: Print two copies of the dac_mount_mk2.stl file Tape one print to each…

Pobrania
134
Polubienia
3
Ocena
0
P
PrintablesScott Smith

Fiio K111 Under Desk Mount

Sized using K11 model from: FIIO K11 DAC | 3D CAD Model Library | GrabCAD Printed with supports in mounting position with PLA-CF.

Pobrania
130
Polubienia
5
Ocena
5
P
PrintablesThis Noise

Fiio K3 under desk mount

This is a simple fiio k3 under desk mount, screws in, strudy & has a gentle grip on the dac. Print vertical as if fiio enters top. I did 4 walls & 20% infill at a 0.22 layer height but it's a fairly sturdy simple design. Uses 5mm screws…

Pobrania
127
Polubienia
14
Ocena
5
P
Printableshellobritt

FIIO E10K (Olympus 2) Headphone DAC Under Desk Mount

Print Details: Overture PLA, Black .4 nozzle, .2 layer height 15% infill no supports I used 4 M3 16mm long screws to mount to the underside of my desk. DAC friction fits in the mount, and abuts the stop in the rear of the mount.

Pobrania
121
Polubienia
11
Ocena
5
P
PrintablesTenocticatl

two part esthetic case for Fiio Snowsky Echo Mini mp3 player

Intro I wanted a cool looking case for my new retro-inspired mp3 player, a Fiio / Snowsky Echo Mini, so I made one. Then I got a little carried away and made a few more variants, including a blank one for other people to mod. Print…

Pobrania
109
Polubienia
17
Ocena
0
P
PrintablesWiggeli

Snap on case for FiiO X3 (2nd Gen)

This protective cover snaps on to the FiiO X3 (2nd Gen.) music player, and can be easily removed. Printed with paint-on supports for the SD card slot. This case looks great in Prusament PETG Neon Green transparent, but the WIPE END…

Pobrania
96
Polubienia
4
Ocena
0
P

Fiio Snowsky disc carrying case

Snowsky Disc Carrying Case Simple magnet-locked carrying case designed for the FiiO Snowsky Disc portable player. I wanted a compact, minimal case that: protects the player during transport prevents scratches in a backpack closes securely…

Pobrania
95
Polubienia
5
Ocena
0
P
PrintablesPolypaul

Fiio K5 Pro desk mount

This is my take on a desk mount for the K5 Pro. The only other version I found at the time would not properly support the amp and always get pulled out when I unplugged my headphones. To secure the K5 in place, put the brackets on the…

Pobrania
91
Polubienia
8
Ocena
0
P
Printablesfrenziedflame

FiiO FT1 PRO comfort strap with lock

This is a remix of the great FiiO FT1 PRO comfort strap with added lock and resize option.

Pobrania
88
Polubienia
6
Ocena
4,5
P
Printablesniba

Fiio K3 under Desk Holder

This is small and simple holder for my Fiio K3. Because i want be able to take it with me on holiday it is not fixed in the holder. The holder it self is taped with double sided tape to the desk.

Pobrania
87
Polubienia
11
Ocena
0
P
PrintablesTG Designs

Fiio K7 Mount & Stand (V1) - Semi-modular, desktop and under-desk

Version 2 of my semi-modular desktop and under-desk mount for the popular Fiio K7 and the Fiio BTA30 pro. Please note that this is still a work in progress. Most of these parts need or will continue to be refined, but they function as…

Pobrania
82
Polubienia
7
Ocena
0
P
Printablesosvatha

Fiio Q3 desk stand

I created a small and simple desk stand for my Fiio Q3 DAC/Amp. I added a tougher version with thicker walls.

Pobrania
81
Polubienia
12
Ocena
0
P
Printablestheraptorrush

Fiio Snowsky Echo Mini Case with Headphone Wrap

Added a headphone cable wrap (https://www.printables.com/model/34877-earphone-case) to the side of the Fiio Snowsky Echo Mini Case (https://www.printables.com/model/1366785-fiio-snowsky-echo-mini-case-and-pocketbelt-clip). Also added…

Pobrania
78
Polubienia
5
Ocena
0

Fiio BTR5 Desk mount

Fiio BTR5 under desk mount using 4 M4 screws. Designed with an opening at the back to hot glue a USB C cable in place. The model features cutouts for the screen and side buttons.

Pobrania
76
Polubienia
8
Ocena
5
P
Printableswhadislove

FIIO KA15 DAC MagSafe mount

Recently got into the IEM hobby and don't like how DAC hangs on its cable. The mount design idea is to keep it attached to the phone and keep buttons easily accessible on the side. As a MagSafe ring, I used this cheap pop socket from Ali…

Pobrania
75
Polubienia
6
Ocena
0
P
PrintablesNurgelrot

FiiO Jade Audio JM21 DAP Clip Case

I liked my case for the M21 so much I made another for the Jade Audio JM21 baby brother. It sits in the case upside down for easy headphone port access. As such you might want to get some fillers for the USB C port and whichever audio…

Pobrania
72
Polubienia
4
Ocena
0
P
Printablesgkatev

Fiio E10K desk mount

For mounting a Fiio E10K under (or on top of?) a desk. Differences from the original: Increased height to also accomodate for the rubber feet Bigger knob cutout for convenience (style 2) Slots for coutersank screws A bit smaller…

Pobrania
69
Polubienia
11
Ocena
5
P
PrintablesTG Designs

Fiio K7 / K5 Pro Under desk enclosure (V3). Also designed for Fiio BTA30 Pro, BTA30 & BTR5 with locking mechanism

3D printable enclosure for the fiio K7 or K5 Pro, with additional spaces and drawers for the Fiio BTA30 pro and BTR5. Version 3.0, with some refinements from previous designs and including a locking/ latching mechanism to fix it in place,…

Pobrania
59
Polubienia
10
Ocena
0
P
Printableslukaz81

FiiO Q1 mkII mount

mount for fitting FiiO Q1 mkII under the table top Print instructions prints fine from PETG without any supports

Pobrania
59
Polubienia
9
Ocena
4

Fiio X1 II Case With / Without Belt Clip

Print the case itself at 100.5% scale and the belt clip at 99% scale for FFF. The print in the photos was done with the case at 101% and the belt clip at 99.5%, layer height of 0.3mm. This worked fine, however, the Fiio was a little…

Pobrania
58
Polubienia
1
Ocena
0
P
Printablestimbr

Fiio K11 Stabilizer

"The bottom is an enigma of what the f--- is this Fiio?!" - "It tends to rock around" - Z Reviews This 360 side skirt serves as a stabilizer to keep the device from flipping when you press on a corner or side. It is slightly less tall…

Pobrania
56
Polubienia
3
Ocena
0
P
Printablesjackdog50

beyerdynamic + FiiO BTR5

Make your beyerdynamic headphones wireless with a FiiO BTR5. This should work on most beyerdynamic headphones, tested by me on the DT770 and DT990, but would most likely work on other beyerdynamic headphones with aluminum yokes. By…

Pobrania
55
Polubienia
16
Ocena
5
P
PrintablesAnanords

FiiO E10K Olympus 2 Desk Mount

Desk mount with 4mm screw holes for the FiiO E10K Olympus 2. I used some 3.5mm wood screws Print with a brim if it doesn't stick to the bed.

Pobrania
54
Polubienia
3
Ocena
0
P
PrintablesNurgelrot

FiiO M21 DAP Clip Case

Case to hold The FiiO M21 DAP in it's silicone sleeve. With a clip to hang on your waistband. You'll need to modify the clip if you want to use it with a larger belt. Quality PLA should work fine 3 walls 15% infill. PETG might be even…

Pobrania
54
Polubienia
0
Ocena
0
P
Printableshcm3

Fiio BTR5 case for Phillips SHP9500

I modified Paul Fallon's BTR5 case to friction fit on the left side of the Phillips SHP9500 headphones. I made the mount with tight tolerances to snugly hold on to the headphones. When you put it on, you may have to spread the “curls”…

Pobrania
54
Polubienia
8
Ocena
0
P
PrintablesNotatechguy

Larger Magnetic IEM Case: Fiio BTR13 + other BT dacs

A remix of a very nice IEM case from @KnifeLover_2335150 with larger dimensions! This remix require 6mmx3mm magnets instead of 6mmx2mm in the original Both a regular case and a case with a divider have been included in the remix. The…

Pobrania
52
Polubienia
10
Ocena
0
P
PrintablesJammerX19

A better FiiO M21 stand

I've seen several FiiO M21 stands but they all had one flaw or another. Mine is sturdy, using a vertical spar underneath to minimize flex. It also has a captive hold on the bottom of the device so it can't slide left or right. And there's…

Pobrania
52
Polubienia
4
Ocena
5

FiiO SP3 Speaker Stand v4

Hi! I've edited the original model to fit a Fiio SP3. There is also another version on my profile.

Pobrania
51
Polubienia
10
Ocena
0
P
PrintablesB

Fiio Q3 under-desk holder

Very simple slide-in under-desk holder for Fiio Q3 DACs I didn't like always having my Q3 freely hanging around on my desk, so I made this holder for it. You need 4 small (I used 2.5mm) wood screws to attach it to your desk, and the Q3…

Pobrania
48
Polubienia
10
Ocena
0
P
PrintablesEccentriclulz

FiiO KA3 MagSafe Case

Print in orientation as imported; enable supports touching the build plate. Attach two parts with epoxy/super glue. Print is designed to mate with this magnet . Requires MagSafe case. Works with stock Type-C to Type-C cable.

Pobrania
44
Polubienia
3
Ocena
5
P
PrintablesKevinU_PA

Plain Simple Dock for FiiO BTR5

Update V2: Revised this on July of 2023 to accommodate the included clip as the BTR5 is a slippery device by itself and QOL improvements! The design is now screw-less and is simply friction fit so you might need some taps with a rubber…

Pobrania
43
Polubienia
9
Ocena
0
P
PrintablesMatec

FiiO K5 Pro - compact secure desk mount

This desk mount for the FiiO K5 Pro contains 2 parts. The larger part screws into the desk of your choice. Place the K5 Pro and secure it with the smaller part. The K5 Pro is now fixed in all directions and very secure. The 2 screws on…

Pobrania
43
Polubienia
5
Ocena
0
P
Printablesnyknyc

FIIO DM13 Bumper Case

Simple but effective bumper case for the DM13 by FIIO in case you move the player around a lot in your house. Can be printed with TPU to add shock absorption.

Pobrania
42
Polubienia
3
Ocena
0
P
PrintablesTG Designs

Fiio K7 & BTA30 Pro under desk mount (V2)- horizontal orientation

The Fiio K7 is under desk mount and is designed to house the Fiio BTA30 Pro. This is version 1; therefore, imperfections may be present. This listing will be updated frequently. Please let me know if there are any issues, and I will…

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesKlish

FiiO BTR3K Shell for a bigger battery

The body fits a 55x45x4 mm battery. I used a 1200 mAh battery. For reference, that lasts around 26 hours of use with LDAC codec. Also included is a special version of this model and a mount for it to fit onto Sennheiser HD650 headphones…

Pobrania
39
Polubienia
10
Ocena
0
P
PrintablesDan3A

Bracket for Fiio E10K headphone amplifier

NOT MY MODEL, ORIGINAL MODEL MADE BY https://www.thingiverse.com/GromMaker. Original description: Bracket allowing you to secure your Fiio E10K to a desktop using two small screws. It slides in with a slight interference fit, but can be…

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesThofu

Fostex T50RP mount for FIIO BTR1K

Should of course also work on T30/T40. Print the two parts and screw them on the rails of the T50RP. The screw hole has a diameter of 2.5mm. Works well with a ~12cm 90deg to 0deg 3.5mm cable between Fostex and Fiio.

Pobrania
38
Polubienia
3
Ocena
0
P
PrintablesTG Designs

Fiio K5, Fiio k5 pro and Fiio K7 knob/ dial ring light blocker

Light blocker for the Fiio K5, K5 Pro, K7 and K7 BT. Fits around dial with small gap to act as a volume indicator.

Pobrania
36
Polubienia
7
Ocena
0
P
Printablesshawly

Replacement Clip for FiiO µBTR

The plastic hinges on my FiiO µBTR bluetooth receiver broke, so I made a replacement. You still need the original spring and the small metal bolt. If you lost the bolt you might source a 1mm bolt from something else but I don't think…

Pobrania
34
Polubienia
5
Ocena
5
P
PrintablesTG Designs

Fiio K3 Desktop stand - simple, elegant, easy to print

V3 - More efficient, elegant design allows the enclosure to dissipate heat better (through the underside of the mount) and improved rear support!! For those unable to mount the Fiio K3 underneath their desk. Angled to drastically improve…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesPan Kote

Cover "Crust" for Fiio JM21.

Cover for Fiio JM21. Reinforced 2mm thick cover with heavy to push buttons to prevent false pushing. There are two options: One has "tight" buttons built into the material. The other has separate, click-in buttons that are more tactile.…

Pobrania
32
Polubienia
3
Ocena
0
P
Printables3sso

Fiio JT7 suspension strap

Print arm and arm cap from something solid. I used PETG. Print strap from TPU. Disable top and bottom from the middle part. Change infill to something you like. Installation instructions: -Remove yokes from the headband and slide arms on…

Pobrania
31
Polubienia
5
Ocena
0
P
PrintablesTolichev

FIIO X5 II Case

Quick remix to add buttons & charging port. Print from flexible TPU - like 92A, 90A or even 87A. (98A is too stiff to insert the device). Case is tad larger than device, but play is less than 1mm in vertical direction (remember, it's just…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesThis Noise

Fiio K3 Desktop mount

This is a fairly simple but (hopefully) stylish desktop mount for the fiio K3 dac. I originally had mine mounted using my underdesk mount, someone requested a dektop one & this is how the design came about. Elevates the K3 off the desktop…

Pobrania
31
Polubienia
6
Ocena
0
P
Printablesmeowww_dev

FiiO New K3 Mount

Super simple mount for FiiO K3 DAC printed in minutes

Pobrania
31
Polubienia
4
Ocena
5
P
PrintablesBlomblo

FiiO E10K Desk Stand

I really liked hellobritt's Under Desk Mount for the FiiO E10K, but I wanted it to be on the desk, so I created this simple remix in PrusaSlicer 2.8.0. Just load the .3mf file into the sIicer and get to printing (or change the parameters…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesNyein Chan Zaw

FiiO M3 Pro Case ( TPU ) DAP DAC

This is a TPU Protective Case for Fiio M3 Pro Hi-Res Player. Hope you love it.

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesAlejandro

Case for MP3 Fiio M3 Pro

I print in PLA witz 0,25 nozzle.

Pobrania
29
Polubienia
0
Ocena
0
P
PrintablesD3ni511

FiiO K7 under table holder

It should be printed twice, so one part can be mounted to the front and another one to the back. 3mm lip and holes for rubber feet help with the stability. I have made it with a dilatation, to make it easy to take out by just pushing it…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesSoftware2

Fiio Q3 Volume Knob Embiggener

Print and pop it on top of the existing knob. Available in a filled and hollow variant. If you want to tweak anything, such as the diameter or height, the Fusion 360 file is included, with parameters for every value.

Pobrania
28
Polubienia
5
Ocena
0
P
Printablesjwb1887

FiiO E10K Under-Desk Mount

Elevate your audio experience while decluttering your workspace with our 3D-printed under-desk mount for the FiiO E10K DAC. Designed for seamless integration with the DAC's original rubber standoffs, this mount ensures stability and easy…

Pobrania
28
Polubienia
3
Ocena
4
P
Printablesjakeu

FiiO K13 R2R + Focusrite Scarlett 2i2 Under Desk Mount

A under desk mount for my old Focusrite Scarlett 2i2 and my new FiiO K13 R2R. I realize that pretty much no one will have this exact combo, but since one of my viewers asked for it, I figured I just might upload it. Especially for those…

Pobrania
27
Polubienia
5
Ocena
0
P
PrintablesPan Kote

Case "Domino" and cover for Fiio JM21.

Case and cover for Fiio JM21. The cover is a bit thin and may need to be reinforced with solvent. Carrying case for the player in its original case or in the included case. Printed in PETG. Case codename: "Domino."

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesPan Kote

Case "Tile" and cover for Fiio JM21.

A case and cover for the Fiio JM21. The cover is a bit thin and may need to be reinforced with solvent. This carrying case is for the player in its original case or the included one. It's designed for carrying with a set of in-ear…

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesMaciey

Fiio Q5 / Q5s holder

Fiio Q5 / Q5s holder

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesBepisRat

Fiio M6 Apple AirTag case

I kept losing my music player and the case it came with was yellowing. This model fixed the first problem, But it's also starting to show its age... The transparent look is cool to see the various infill patterns. I believe the one I used…

Pobrania
25
Polubienia
1
Ocena
0

FiiO X5II protective case

Prints in one piece Supports : None required (unless your printer struggles with overhangs). Orientation : Print the main body flat on the bed Infill : 100% easily Layer Height : 0.15 mm

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesJammerX19

Hard case for Fiio M21 DAP

I wanted a sturdy box to protect my new Fiio M21 DAP. I designed this to hold the DAP while it's in the factory rubber protector. The logo is flush with the top of the lid if your printer supports multi-color printing. If you place the…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesTeketa

Fiio K3 Mount for Raz's Desk Organizer with Magnetic USB-C

I made this model to attach my Fiio K3 to the Raz's Desk Organizer. Since i use the sound card both at work and at home, i have added a magnetic USB-C mount so i can quickly attach and detach it by just pulling it out The magnetic usb-c…

Pobrania
23
Polubienia
3
Ocena
0
P
Printablesmehrteiler

Gridfinity FiiO BTR5 Holder

PLA layer height: 0,2 Infill: 25%

Pobrania
23
Polubienia
5
Ocena
0
P
PrintablesNoOneAtHome

FiiO Q1 Mark II Phone Stand

Well I am being forced to return to the office and I need my tunes. I didn't want my phone and DAC just laying on the desk so designed this.

Pobrania
22
Polubienia
7
Ocena
4
P
PrintablesTG Designs

FiiO BTR17 Case - Latch/ Lock-in Mechanism for Portable Bluetooth DAC AMP

Case for the FiiO BTR17 . Version 1.2 - Optimised latch and 3D model cleanup. Unlike the included case, it is designed to latch onto the device, reducing the risk of the Portable Bluetooth Dongle/DAC and Amp falling out. This has also…

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesAivoric

FiiO K5 mount

Simple screw mount for the FiiO K5 coming in at around ~10g material for one piece. I used 4,0x20 Screws.

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesDaniel

Fiio E10k Desk Mount (Adhesive version)

remix of that one with screw holes - now you can attach adhesive strips to the side instead if you like that better.

Pobrania
21
Polubienia
2
Ocena
5
P
PrintablesRedSqaudron

Simple FIIO K11 under-desk mount

This is a simple under-desk for the FIIO K11. This is also my first original design using Fusion 360! I got this to use with my Sennheiser HD 600's and its awesome for my other headphones since it has a quarter inch jack. This is not the…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesCJ Bookheimer

Fiio BTR5 Holder 2.1

A better version of the Fiio BTR5 Holder.

Pobrania
20
Polubienia
1
Ocena
0

FiiO SP3 Speaker Stand v3

Hi! I've edited the original model to fit a Fiio SP3. There is also another version on my profile.

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesUndeadMonk

Fiio Snowsky Echo Basic Stand

Couldn't find any existing docks/stands/mounts that suited my needs, so I put together a very basic dock for the Fiio Snowsky Echo (note: NOT the Echo Mini!). There are 2 versions of the dock. "Tight" will securely hold the player (caveat…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesGummientchen

Fiio K3 Holder for IKEA BEKANT table

It's compatible with the Fiio K3 and BEKANT IKEA table. Compatibility not tested with motorized version of BEKANT table.

Pobrania
19
Polubienia
3
Ocena
0
Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesDimitar Tanchev

Fiio A3 protective case

A protective case for Fiio A3 Category: Audio

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesTamatoaCoco

Fiio K3 Under Desk Mount by framalho

This is a design made by framalho on Thingiverse. I find it very lightweight, sturdy and elegant.

Pobrania
17
Polubienia
1
Ocena
0
P
Printableslouckousse

Fiio K3 Underware holder

An underware ( https://handsonkatie.com/underware/ ) holder for the Fiio K3 DAC compatible with the standard underware connector. You can find the model on my onShape…

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesNurgelrot

FiiO M21 Travel case

Travel case for the M21. Print the case in any any plastic you like but remember if you're going to have it in a summer sun hot car, you probably want to avoid PLA. 2+ walls +15% infill. You'll need 6 M3x18 or 20mm screws for the hinges…

Pobrania
17
Polubienia
4
Ocena
0
P
Printablesshallax

FiiO Snowsky Retro Nano Extended Battery Case

Tired of FiiO's poor power management? Wish you could get a whole day out of your Snowsky Retro Nano? Well now you can and somewhat in style. Fits a 963450 battery, but this can be altered with relative ease as I've included a STEP file.…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesAnriha

Gridfinity FiiO K5 Pro

Simple mount for FiiO K5 Pro with gridfinity.

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesMorbier

Fiio Olympus 2 under desk mount

See other models for my desk at https://www.printables.com/@Morbier/collections/1571699

Pobrania
17
Polubienia
2
Ocena
4,5
P
PrintablesRO18XU

Fiio K3 desk mount (screwed)

These are two simple brackets designed to mount the Fiio K3 DAC under a desk with a single M3 screw on each side. The print is quick with no excess material, providing a stable hold. The DAC is inserted by flexing the brackets slightly.

Pobrania
16
Polubienia
0
Ocena
0
P
Printableslmm5247

FiiO E10K (Olympus 2) Desk Stand

I had this printed at Detroit 3D Manufacturing via Craftcloud in black PETG at 60% infill (to give it some weight). I have the original E10K (micro-USB), but there is a newer E10K-TypeC (USB-C) which I have not tested, but I believe it is…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesJohn Smith

FIIO KA15 belt clip

This is the case for FIIO KA15 dac with belt clip. Supposed to be used together with default leather case. Clip part was taken from the original model. Box part was fully designed by me. It's not ideal, but it's like 10th printed…

Pobrania
16
Polubienia
1
Ocena
0
P
Printablessam gdjen

FiiO Snowsky Echo Mini case and plane for metal clip

I have a metal clip, and I decided to make a case for the Echo Mini to attach it to my belt. To attach the part to the clip, I used glue and additionally riveted it with a 3D pen. Dimensions of the metal clip - 55 x 25 mm, thickness about…

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesosvatha

Headphone Stand with slot for Fiio Q3 DAC

This is a headphone stand, with a slot at the base for a Fiio Q3 DAC. Size is 120x120x236, so it will fit many printers, and support many headphones. I know there are nicer designs out there, BUT this is: functionally satisfies my needs…

Pobrania
16
Polubienia
1
Ocena
0