Wyniki wyszukiwania: finge

Pull Copter Finger Ring

Like this design? Check out the Pocket Copter! Fast to print and assemble. No screws or glue needed. Prints without Support Structures: https://www.printables.com/model/421807 Pull Copter Finger Ring Projectvideo:…

Finger Slinger - Print In Place Spinning Fidget

Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…

Finger Brace (splint)

Finger Brace (splint) Suitable for broken or dislocated middle segments and fingertips, or for post-surgery recovery of these body parts. When elongating the brace in the slicer (scaling it up in the longitudinal axis) so it extends to…

The Ultimate Finger Catapult [Easy to print] *Updated

*revision note 14-07-2024: increased the strength of the spring and travel of the bucket. *revision note 19-07-2024 : For better shooting performance, the spring is even stiffer, a little flange is added for releasing precision and the…

finger crocs

I have made a 1:1 perfect replica of the favorite shoe brand ‘crocs’ in this instance they have been shrunk down to fit your fingers but feel free to scale them up and use how you please. i used TPU to have a rubber effect add supports…

Snack Finger Chopsticks

Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…

Nail Guide / Finger Guard

Supplies Needed 8x3 mm Magnets (2 required) & superglue to hold them in. Magnets are optional. Description A small jig to guide your screws and nails straight and to protect your fingers. The tip is printed with 50% infill so a hammer or…

Improved 3D Pull Copter Finger Ring - M3 screw version

Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…

Finger Trap

This is a simple Finger Trap, base size works well, but it seems best at 150% and even 200% scale. The setup is similar to real traps of this style. The kids like sticking candies on it and waiting for friends to try and grab them. The…

Phone Finger Holder

A comfortable finger grip that makes holding your phone easier and reduces strain on your pinky. 📱 Slips onto your ring and pinky finger for a secure, relaxed one-handed hold 🔄 Built-in rotating finger rings for smooth movement and extra…

Flexible fractal finger fidget (vase mode)

I wondered what a space filling curve might feel like to play with, so I made this. Even though it kind of looks like a space filling block, it is indeed just a single curve looped in on itself and thus can be printed in spiralized vase…

Thumb Wars Lightsabers (Finger toys)

1. Introduction The perfect toys to print if you want to play “thumb war” like a true Jedi or with the dark side of the force like a Sith Lord ! First, chose your handle and your destiny ! I design all handles based on the real ones you…

Fingerboard Skatepark Modular - Ramps, Rail and Stairs

Jump and grind how you want and where you want. At any time. It is modular, so you can start small and go big over time! Update 2024-01-21: 3rd addon uploaded! Thanks for the first makes :-) Transition from low to high block, small ramp…

Ausstechform Mittelfinger / Middle finger cookie cutter

Ausstechform Mittelfinger / Middle finger cookie cutter

Totoro Family (finger toys)

We are obsessed with Totoro over here, so after watching the movie a 4th time just this weekend, I had to give this a try. Designed on Nomad Sculpt, the models print well without supports both in mono and multi color. Check also my other…

guitar/banjo/autoharp finger and thumb picks

Almost out of filament? Print these with the last few fractions of a meter, and in a just a few minutes you can sing the blues. You can also load up a new spool set up a new print, and Rock ON while the new prints proceed! These couple of…

Finger spinner V2

If you want to support my work, buy me a coffee V2 is out! The following internal diameters are currently available: 20 - 22 - 25mm if you want other variations ask in the comments Print settings: Nozzle: 0.4 mm Loop: 4 LH: 0.2 LW: 0.4…

Finger Hanger

You need two 3,5mmx20mm(or longer) woodscrew or similar to install it save to your wall!

Solder Fingers 2.0 - soldering aid / helping hand

A few years ago, I made my own version of a soldering aid for wires. I posted it on Thingiverse and it became fairly popular. I always wanted to redo it with spring loaded clips. Using the springs from dollar store clothespins, I designed…

NSFW Ghost Fingers- Flat bottom

Finger Fidget Spinner Toy

A playful finger flipper designed for smooth tricks and satisfying motion. 🔄 Features 4 balanced arms for easy flipping between fingers 🌀 Includes a print-in-place center ring , turning it into a functional mini spinner 👌 Lightweight,…

Prusa i3 MK3 Finger-Wheel / Knob

So a few Month ago i decided to make myself a better knob since i dont like the original one wich came with my mk3. i used v1 for a few month now without any problems but lately i wanted a little bigger version of it which looks not as…

Fingerboard Rail

Small fingerboard rail I made. Put rubber feet on the bottom for best effectiveness.

ONE-FINGER TAPE MEASURE WINDER Parametric (608 BEARING required)

Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…

CNC Finger Clamps

CNC Finger Clamps for M8 or 5/16 bolts. Stepped rear with matching stepped lifter block to support clamp at different heights. Print files provided for PETG and ABS, to print 4 x clamps with or without lifter blocks Use with my 5/16…

Pointer Finger Blade for Circle Game Gravity Knife

My friends became tired of always getting punched from looking at the Circle Game. So I made them a Pointer Finger Blade for them to use to “Break” the Circle and get their revenge. Hope You Enjoy As Well!

Spinning Finger Top & Reversed Top

These small tops are very light so they can be launched at high speed. They are easy to print, no support, no glue, no screw . You just need to clip the central axis up to the end and it's ready to spin (hold by the center when clipping…

Customizable guitar finger pick - ring pick v2/Kytarový prsten v2

My previous model was a bit rough and kind of bad on the back stroke. This one is made to be more print friendly. The size of the ring is 53 (EU size; inner diameter 16,9mm). I post 2 models. One is what I use. The other one is mentioned…

Guitar finger pick - ring pick/Kytarový prsten

I didn't find any guitar rings anywhere. So here is my design. 100% scale is size 50 (EU ring size). Scale as you need. I found out it is better to print flat on the tip. Does not scrape strings. Print with supports on the pad for better…

Finger splint

Protection pour doigt, inspiré du modèle proposé par Mr. E Menace. Ajout de perforations latérales Augmentation de la protection au niveau de l'ongle Longeur 65 mm ; diamètre 26 mm

Finger Fidget Flipper Toy

A compact three-arm flipper designed for smooth finger tricks and quick stress relief. 🔄 Perfect for flipping between your fingers to build dexterity 🖐 Helps with focus, relaxation, and finger coordination ✨ Lightweight, durable, and easy…

Coily finger puppet + Qbert Model

Coily Finger Puppet With Special Bonus Qbert Model. (see photo)

Finger Snowboard

A snowboard with perfect grip for fingers, which you can also use to decorate your Christmas tree. A little support is needed on the overhanging parts of the board. Infill : 10%

Finger Hex Wrench - 4mm and 1/4-inch

Remix of the very cool "Finger Hex Wrench" by RonaldWalters at https://www.thingiverse.com/thing:3985566 I wanted to challenge myself and do a complete from-the-ground up redesign (reimplementation?) of the original finger wrench in…

R2D2 Finger Puppet.

R2D2 Finger Puppet. Opening of this model is around 18 mm. Scale to your finger using ruler option in Prusa Slicer. Note: R2 gcode is for .6 nozzle and includes organic supports.

Finger Racers

This is a little racing toy for fingertips: The model is oriented for easy printing. No supports should be needed. Plain bearing is print-in-place. The “pedals” are printed as one piece but breaks apart for press-fitting into the wheel…

12mm/10mm finger wrench

I've been building a modular synthisizer (with 3d printed panels) and need to quickly tighten a lot of jack sockets and potentiometer nuts. So I whipped up this little 10mm/12mm wrench that lets me do it. 2/10/2021 - Added a modified .stl…

Dedsec Middlefinger Keychain (Remix)

Tiny Back Scratcher Hand – Extra Long Finger Extension

Tiny Back Scratcher Hand – Extra Long Finger Extension Product Description: Introducing the Tiny Back Scratcher Hand, a clever and practical tool designed to help you reach those hard-to-scratch spots with ease. This tiny hand slips onto…

Flexible Index finger

Easily printable Index finger. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelný ukazováček. Segmentace CT dat dělaná ve 3D sliceru. Ostatní 3D práce v Grashhoperu a MeshMixeru. Prusament…

Clap T-rex Finger Toy

Sad T-rex from the meme made into a finger puppet! The hole is around 17.5 mm, if your finger is smaller/larger, adjust the scale of the model accordingly! Minimal support is needed under the chin. In the provided print file, additional…

Peace Fingers keychain

This keychain has a raised section for dual-color printing. Printed in PLA at 0.2mm.

Finger Flinger

Do you find yourself with spare mini marshmallows, M&Ms, wads of paper, and other small objects that need to be hurled across the room? Well look no further! Introducing the amazing FINGER FLINGER: the pocket-sized catapult capable of…

Finger Guard for the HERRINGBONE PLANETARY GEAR

Motivation The original model is not big enough to hold it comfortably, if you have large fingers. This snap-on guard solves the problem. Printing instructions Use the Fuzzy skin with default settings (thickness: 0.3 mm, distance 0.8 mm)…

Finger Knob 1/4" Socket Wrench

Small quick-print socket wrench with finger-sized handle for 1/4" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…

Kurbelaufsatz mit Fingermulde für Yaesu FT-817 und FT-818

Dieser Aufsatz für den Tuningknopf des Yaesu FT-817/18 ermöglicht ein rasches Drehen desselben mittels klappbarer Kurbel und optionaler, aufgeklebter Fingermulde. Als Achse für die Klappkurbel ist ein Stück Filament (1,75mm) vorgesehen.

No-Face Finger Toy (Spirited Away)

No-Face is a character from the movie Spirited Away. He is a lonely spirit that gets attached to Chihiro and starts following her everywhere. Spirited Away is a movie from Studio Ghibli. Printing Advice This model was designed on Nomad…

Mittelfingercoin für Einkaufswagen

Einkaufswagen Chip am Mittelfinger mit Loch für den Schlüsselbund. Shopping cart chip on the middle finger with hole for the key ring.

Huh Cat Finger Toy

A tribute to Internets famous “Huh Cat”, my daughter's favorite cat meme.

Finger Knob 3/8" Socket Wrench

Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…

Arduino Fingerprint Reader Case

I designed the electronics case for the Arduino fingerprint reader project in order to facilitate conducting experiments and ease of connection, verification and modification, and not for final use by the user in order to facilitate…

Parametric Finger Wrench Set 5-14mm

About I needed to find a way of tightening nuts on various pieces of electronics hardware (audio jack sockets, knobs, switches, etc) and normal metal sockets were too short, scratched front panels and enclosures, and were difficult to…

Microwave Cover / Anti-Splatter / Finger Grips.

Microwave Cover for Food / Anti-Splatter / Finger grips. Both are 65mm tall. The 210mm dia is the largest it can fit on MK3S. Material: Transparent Polypropylene (PP) or PETG

Rampa pro fingerboard

Pro potomka vytvořena cvičná rampa se zábradlím.

Fingerboard Rack

This is a great way to store and display up to 4 fingerboards at a time. To make it, print 2 Sides, 2 Pegs and 1 Joiner, then just click it all together as shown in the pictures and display your prized boards.

Finger Slinger 2.0 with Bearing Joint

!! Attention: See the new upgraded model here ! !! While the original print-in-place bearing is fantastic and works very well, the nature of the print-in-place arrangement means that the underside of the top part ends up a little messy.…

NeverShut: Adjustable Door Safety Catch (Children's fingers)

An adjustable door safety catch that prevents your door from fully closing, saving thousands of children's fingers from being slammed in a door! Fits any standard 35mm thick door. To adjust the door opening, slide the device further along…

No Soliciting Middle Finger Sign

soldering finger

The diameter of the closed ring is 20mm. The two included caps are to thighten the ring without the need of screws or other tools. The finger itself will be glued on the ring.

Paper scissors blade with larger finger holes

This is a replacement blade for the Paper scissors model with a larger finger hole for bigger hands (see second picture for side-by-side comparison). The basic blade shape and joint hole are unchanged, so you can mix and match with the…

Finger Clay Jordans

This is a fun model I created with Nomad Sculpt. Printing Tips I printed these with PLA at 0.20mm (speed) on a Prusa MK3S+. The .3mf file is included - notice you may need to scale it depending on your finger size :)

Sealant Scraper Tool - Thumb or Finger Replacement Tool.

Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…

Universal 2-Sided Phone Stand for phones with an fingerprint reader at the bottom

This is a simple and clean universal phone stand with 2 different viewing angles for smartphones with an fingerprint reader at the bottom. Fit's for example the IPhone SE. This is a remix of this original model:…

Finger Snowboard

This is a fun snowboard to keep the shred going wherever you are. This is a print in place model with rotating bindings. You might be able to scale it up and down, depending on finger size. The bindings become a little sticky after a…

Solder Fingers Support

Three arms on a base can support your two pieces to be soldered and the solder. When connecting or disconnecting the joints, push them together in line. If pushed together at an angle, the tines tend to break off. That does not completely…

Finger thread spiner

This model is printable with a 0.2mm layer, but your printer must have good cooling.

Fingerhut mit Name

Falls ihr andere Namen und/oder ein anderes Datum drauf haben wollt, könnt ihr das in die Kommentare schreiben (ich Antworte spätestens in einer Woche aber meißtens früher). Das datumm mit niedriger Geschwindigkeit drucken (sonst sieht es…

Learn 10 Finger Typing incl. STEP and .ipt

You can adjust the size in slicer to fit it to your keyboard. Scale the moddle in the slicer acordingly to your keyboard. It fits perfect on my HP convertable 15,6". Please please add this moddleto the keycaps competition.i designed it…

Yuki Finger Guard Noctua Compatible

Description Yuki finger guard modified to be compatible with the Noctua NF-A8 fan. Easy fit and easy remove if needed. Maybe compatible with other 80mm fans. Print instructions I used 0.30mm draft settings in PrusaSlicer with default…

Finger Flicker Football!

Official Finger Flicker Football for Cafeteria Tournaments!

Bag Clips (Modified with Finger/Thumb Tabs)

These clips are used to seal your open potato chip bag. Three sizes are available. Because there is a large printing overhang for the tabs, I included tree supports which removed easily.

Finger Wrench for Primal Rights Competition Primer Seater (CPS)

The user manual for the Primal Rights Competition Primer Seater (CPS) says not to use tools to tighten the shell plate holder screws — finger tight only! In practice, I've found “finger tight” to be barely sufficient. While it's…

Finger spacer for leather tab for archery

wider finger spacer replacement for leather tab

Cat fingersaver for heaters

Please, print only in heat resistant materials, PETG or above. Super please, check dimensions, I have added pictures so you can do this easier. This piece is meant to avoid MochiZapata and NaraKnope safe, as they like to play and run over…

Our Generation Doll - finger holes

This is a template for finger holes and you can build off of it to make things that an Our Generation doll (18-in/46-cm doll) can hold, such as a fork: https://www.printables.com/model/684391-our-generation-doll-fork Printed with…

Nicht Gefingerpoken sign

100x160mm sign reminiscent of the classic Blinkenlights text. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.

Fish Fingers Pizza

Prints best at 0.2mm layer height. It is designed to be printed with 5 different colors. The doe, sauce, spinach, cheese and fish fingers. To slice this file using prusa printers, go to the tab “Printer Settings” and set the extruders…

10 finger tapping on the on-screen keypad incl. STEP

Spacer to make it easier to tap the on-screen button with 10 fingers. Abstandshalter um einfacher mit 10 Fingern auf der Bildschirmtaster tippen zu können. Scale the moddle in the slicer acordingly to your keyboard. It fits perfect on my…

Finger Skis

print with supports! I added a g code but if you use the stl remember to add supports everywhere.

3 Finger Ring with "root"

Do you want to show your colleagues who the real boss in your company is? Do you want to assert your position of power? Then this is the right accessory for you! For the size I used 25cm diameter for the index and middle finger, and 24cm…

Hangboard / Fingerboard v2

Training tool designed to enhance finger and grip strength, crucial for rock climbing.

Finger Skis

This is for the contest!

Fingerboard!

Train your fingers Hole for rope STL and Gcode 10mm

FingerTraining

Train your fingers! It's ideal for climbing or other climbing sports! The holes are ideal for hanging it on ropes STL and Gcode 20mm

Gold And Silver Onewheel Fingerboard

I really like this model but I wanted to post this colored remix because it is way better looking when colored. I recommend that you add tape to the wheel because without it the grip is terrible. All downloads are appreciated. Print…

Little Gree Army : Princess Bride : The Bad Guys : Humperdinck, The Albino, Six Fingers.

Little Gree Army : Princess Bride : The Bad Guys : Humperdinck, The Albino, Six Fingers.

Finger Chopsticks

Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.

👽🦀 Alien REMASTERED facehugger print-in-place. Long tail and fingers.

Info: I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place bent tail & fingers allow: much longer tail (tail has 41 particles, instead of 11…

Air Jordan One / 1 - Finger Shoe

Finger diameter at base is 17 mm. Scale a model so that it suits your needs! High Quality OBJ - mm

Nail Tool V2 - Save your fingers

Intro Sometimes the simplest tool is the most useful — and this one is no exception. This handy nail-holding tool lets you grip a nail securely while you hammer it in, keeping your fingers safe from accidental hits. It’s quick to print,…

5 Finger Fidget Clicker

A simple full hand clicker toy. Great for keeping you hands busy or relieving stress. Great for use during meetings or class or when you just want to sit back and free your mind. This is compatible with the Kailh Box Switches and Outemu…

Soldering Fingers

While this isn't strictly a remix, I wanted to give "idig3d" credit for the inspiration. I created a soldering helping hands http://www.thingiverse.com/thing:1635453 but when I saw idig3d's version, I liked the simplicity and faster build…

Articulated Finger Extensions

Articulated finger extensions are a mechanism used to extend fingers, including movements. The mechanism consists of several joints joined by gears and linkages to copy the movement of a single finger joint to all other joints. The…

Bic Lighter Case Keychain - Blood, Finger Horns, & Pac-Man - Fuzzy Skin

🔥 Cover up that boring lighter! Always have a flame on hand with three different styles to match your vibe or your mood! TIL: The name Kanik comes from Greenlandic origin, and it means Blood. I used fuzzy skin on these models, and they…

Harry Potter Sorting Hat finger toy

Sorting Hat from the Harry Potter movies to use as a finger toy

Print in Place Finger Skateboard With Moveable Wheels (Tech Deck)

Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…

Finger extension brace (splint)

Finger extension brace (splint) Suitable for treatment of injured extensor in the fingertip (i.e. “mallet finger”). Total fixation period of 6 weeks. Also suitable for fractures of the fingertip, which lead to the same symptom - finger…

Mechanical Finger Prosthesis

Prosthesis finger, to be printed with strong material. Will not be functional when printed in FDM PLA. Functionnal proof of concept, dimentions to be adapted to fit the need.

FINGER FIDGET FLIPPER

Introducing the Finger Fidget Flipper : a revolutionary way to stay energized and focused throughout your day. This finger roller flips through your finger like a coin, providing an irresistible challenge that can help reduce stress and…

Hypermobility Finger Splint

The base model is a size 10 and I went through and did test prints to get as close as I could to general ring sizes to make things easier for folks to print. You may need to adjust as you see fit for shrinkage and other things but as it…