1029 modeli
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Newer repboxes don't come with spool holders, but use a slip rod - which has way too much friction. Repkord has a spool roller model to fix that - but it takes way too many screws to assemble, is still rather wobbly without adding even…
Plant fastening / fixing clips - Pflanzen Befestigungsclips 30mm / 40mm variants
I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…
Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA
Pflanzplatte für alle Gefäße mit LECHUZA Stick-Bewässerungssystem z.B. Cube 14/16 Canto oder Yula Töpfe Bodenarretierung hat einen Durchmesser von 69mm/80mm Die zwei Löcher für den Docht haben 6mm Durchmesser für die Druckeinstellungen…
Easy to print plant holder. Insert the plant holder into the aluminum profile of your greenhouse and attach any string or wire. Printing Instructions No supports needed.
Die Steckbare Rankhilfe kann einfach erweitert weden Druck: - PLA - Stützgeometrie auf dem Druckbett
Schilder für deine Pflanzen, mit Information Über Namen und Alter der Pflanze. Labels for your plants with information about the name and age of the plant.
Schmetterling Gelbsticker für Pflanzen
Schablone zum Schneiden einer Flanschdichtung
Unsere Tomatenpflanze wächst in einem Topf. Zur Abstützung wurde ein Stab mit einem Durchmesser von 10,8 mm sowie diese Clips verwendet. Der Clip hat auf einer Seite einen Durchmesser von 10,3 mm und sitzt somit fest. Die andere Seite hat…
Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000427 : Planetary flange
Designed for Seven Master EB-303 Water Pump AC:220V/50Hz 10W Hmax: 1.2m Qmax: 600L/H From 13mm Flange to 1/8" Thread (for Festo Adapter) Edit : added Adapter with key width 14mm
Unauffällige Reparatur von einem historischen Kronleuchter mit 4 M3 Gewindebohrungen.
Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…
Allgemeines Ich fand das original Modell sehr niedlich, allerdings lies es sich mit dem gewölbten Boden auf der Unterseite nicht sehr gut drucken. Daher habe ich Modell angepasst und den Boden begradigt, sodass es sich gut drucken lässt.…
FormFutura's ReFill 2.0 is manufactured for usage with re-usable spool flanges and comes on a cardboard core with velcro strips. This improves the material winding and overall coil strength. Our new flanges are designed with minimum…
The Sukhoi Su-27K now known as the Su-33, NATO reporting name: Flanker-D, is a Su-27 modified for carrier-based operations. The Su-33 has a strengthened airframe, arrester hook, folding wings and stabilizers, and larger wings and added…
I noticed that the IFS wouldn't grab onto the spool correctly when I was using Anycubic filament I had purchased on Amazon. I decided to create an adapter, which seems to work perfectly and hasn't caused any issues after further prints.…
Hallo 3D Druckfreunde, ich biete euch hier einen Pflanztopf zum runterladen an. Das Design ist modern gehalten. Die Druckdetails findet ihr weiter unten. Abmessungen: Höhe: 100 mm Breite Oben u. Unten: 100 mm Durchmesser der Öffnung inkl.…
Vacuum hose flanges to connect hoses of all common sizes to a flat surface. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 20mm long connector at each end 6 screw holes with 5mm diameter Wall thickness of…
About the Su-27 Flanker The Sukhoi Su-27 is a Soviet-origin twin-engine supersonic and supermaneuverable fighter. It was intended as a direct competitor for the large US fourth-generation jet fighters such as the Grumman F-14 Tomcat and…
Automatic watering for plants with incl. pot. Very solid design printed with PETG.
This model is compatible with the lego system.
Diese Saatpalette kann dir bei der Aufzucht deiner eigenen Pflanzen helfen. Sie passt gut auf so ziemlich jede Fensterbank. Sobald die Pflanzen groß und kräftig genug sind, solltest du sie in einen großen Topf oder ins Beet Pflanzen,…
A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.
Regular triangle rail cross for wooden railway by Ikea, Brio, ... Recommended printer settings: Perimeters: 3 Layer height: 0,2-0,3mm Infill: 10-20%
Der Pflanzenclip wird zum Befestigen von Blumen und Pflanzen mit dünnen Stämmen am Pflanzstab benutzt. In PETG wegen Witterungsbeständigkeit drucken! Ausreichend Infill ist vom Vorteil ! The plant clip is used to attach flowers and plants…
I printed mine with a 0.08mm layer height and the threads fit wonderfully, it threads on nice and smooth and tightens well. The external dimensions of the nut are the same as the ones that come on the jacks so you can use the same socket…
This is an accurate recreation of the Prusa MK3 POM TR8x8 and probably other printers (other ones I tried from thingiverse didn't match the lead pitch). I print them in PLA and use them in a MK2 clone I have lying around, they work…
Pflanzenschild zur Beschriftung von jung Pflanzen.
Die Pflanzenstengel haben genügend Platz und werden beim Wachsen nicht behindert. Die Clips sind optimal geeignet für 2 -3 mm und 5 -7 mm dicke Stäbe. The plant stems have enough space and are not hindered in their growth. The clips are…
The motormounts in the photo are slightly different, they are the old version. The attached files contain all models of the current version at the time of publication.
Flange nut for faucets or pool hose/filter (flange ∅ OD = 38mm)
Customizable Duct Flange (OpenSCAD) Create your own duct flange with this highly customizable OpenSCAD script. This design allows for both circular and square face shapes, making it suitable for a wide range of applications. Features :…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
A 120mm fan duct for 90 degrees mount. I use it for my Alveo3D filtration system, but it should fit to any standard 120mm fan. The pipe has 0.8mm wall, which is not super sturdy, but works well and saves filament. See the dimensions if it…
Print flat side down at a decent layer resolution and you're good to go. Probably wouldn't recommend PLA seen as it might crack under heavier use. Needs some force to screw in first time because I added next to zero tolerance so it's as…
kleiner Pflanzentopf für Setzlinge oder kleine Pflanzen. Vasenmodus. You have to use “Vase Mode”.
This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…
Finger savers for easy opening of the door on Ruffland dog kennel/crates. The models are correctly oriented for printing. Part one needs some supports see below picture. Part2 slides into part one. Part2 cutedge is easier to press on the…
Unchanged and added for the kit: higher_tensioner_spacer, interbearing-washer, lower_tensioner_spacer. The X-axis carriage is based on a CAD model from Henlor -https://makerworld.com/en/models/171995 The X-axis carriage with an oval hole…
Flange that can be mounted onto a 120mm PC fan and then interface with a 4in" AC duct in order to vent heat and fumes outside. I am using thinkingalaud's original model for the flange that faces outside, but needed to remix their model to…
Einfache Pflanzenschilder für Ordnung im Garten und Hochbeet Bitte beachtet, dass einige Schilder von anderen Usern erstellt wurden. Ich achte darauf, nur Schilder aufzunehmen, die meiner Designsprache entsprechen und keine…
This is just a very simple flange I created for a shop project, to attach a 4" dust collection hose to a flat object. In my use it was a downdraft table built for a disk sander, but it should be useful in any similar application. I…
It improves unwinding as it improves the spool edge smoothness and stability. Simply put one on each side of the spool. No glue needed. You may want to add a clip or screw at the holes if it fits too loose.
Needs to be printed with 0.1mm layerheight or better. 1 June 2025: added “M65Front_Copal_GENERIC v1” both as STEP and f3d files + “M65_flange” as STEP. for easy modifications.
As I just needed plant benders for LST to train my Canadian mountain maple :) I have replicated the two versions of clips. Print: Material: PETG (certainly also printable with PLA but for better durability I recommend PETG ) Resolution…
These are used to seal hydraulic flange fittings while performing a repair. They help to keep oil in and contaminates out. There is -12, -16, -20, -24 and -32 sizes available, These should all be able to be used with code 61, 62, and Cat…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
Ziel dieser Teile war: größere Menge an Wasser in eine Topfpflanze zu bringen beim Abziehen der Flasche keine Erde im Raum zu verteilen mit möglichst wenig Auwand lange Bewässern zu können Infos: Je nach Größe der Löcher in den Schrauben…
This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…
Der Flansch Innendurchmesser ist 50mm. Ich nutze ihn an meinem Fräsanaschlag.
I created this box to store my loose chilli seeds. In order to protect the seeds, the box is almost opaque (depending on the filament). Dimensions in mm (single tray) Inside: 42,8Lx22,8Wx20,8H Outside: 50Lx30Wx30H Wall thickness: 3,6 I…
My enclosure has a built in fan over an opening. I wanted to be able to control where it vents out to (a nearby window), so I purchased 4in ducting on Amazon . In order to secure the ducting in place, I designed and printed this. It is…
Signs for your plants in the garden Length approx. 200mm width 15mm Thickness 3mm If you use the Prusaslicer, you can set a color change at 2.2mm. I printed the labels in PLA. Have fun printing! If you have a special request, use the…
Hello, please make shure to print the duct port first and measure the inside diameter to scale it with your slicer settings! Its made to fit 150mm hoses / 6 inch duct hoses and clamps In the original drawing the insert has a clearance of…
Simple 4 Inch Duct Interface plate. Originally made to create a Tee box for printer exhaust ducting.
Harke für das auflockern der Erde bei Indoor Pflanzen. Sowie ein Schaufel, mit längerem Griff.
This model is compatible with the lego system.
Ein Topf mit Untersetzer zum Bepflanzen für Kräuter, Blumen oder andere Pflanzen. Topf verfügt über eine Öffnung im Boden, über die überschüssiges Wasser auf den Untersetzer laufen kann. Topf und Untersetzer sind leicht miteinander…
These are the boxes for Kaufland/Lidl wall organizers. They are roughly in the dimensions of original boxes, but my goal was not to replicate them and make them stackable, but to replace/print more of the chosen size. Thus, they are not…
Support wie im Bild. 3x 2mm Schrauben zur Befestigung notwendig. Gedruckt in ABS. Grobe Anleitung: Ausgangszustand Motoreinheit ausbauen (4x T6 unter dem Batteriedeckel, Verstellrad einfach abziehen) Flansch entnehmen (2x T9 seitlich)…
Sexy Flanders Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
Flange for flush mounting 3/4" PVC. I use it for making air flags for quad racing using dollar store pool noodles. Category: Household
Offset Flange Structural Pipe & Fittings Ø 10 / 12 / 13 / 15 / 18mm Collection Slip-on connection Resize to adjust dimension - If you download/enjoyed this file, please leave a like - Thks Update: 27/12/2024 added Single tab version All…
Simple small plant clip for metal grid with 5mm rods
Einfache Möglichkeit einen Überblick über die Pflanzen im Garten zu haben (es handelt sich hier um einen Remix). Die Schilder sind inspiriert durch ein super Design von Martin Merklin (seine Schilder sind auch direkt bei ihm im Shop…
These screws are inspired by DINE6921 metric screws with hex flange head and they have metric fine pitch threads . The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without…
PLA and PETG are fine for these, ABS and ASA can be solvent welded to the pvc pipes with appropriate solvent, use flat head fasteners either construction, wood screws or machine screws.
These are Code 62 flange plugs for blocking off open ports on hydraulic systems on heavy equipment. They're lightweight, easy to print, and great for keep dirt out of your system while working on it, or stopping oil flow after removing…
Elegoo Saturn 4/4 Ultra Ventilation Flange and Fan Bracket In poorly ventilated areas, resin can become unpleasant and unhealthy. This model allows you to attach a 60x60 fan to the accessory port and quickly vent fumes using a 50mm…
Mit NORA bekommst du einen eleganten und modernen Pflanztopf / Übertopf mit einem besonderen, ornamentalen Muster. Die geschwungene Form in Kombination mit dem dekorativen Außenlayout macht dieses Modell zu einem echten Hingucker auf…
2020 T- Slot Foot Cap Low Type / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Bassa Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
I needed a pipe flange with a square base, so I designed one. Glue a piece of plastic pipe into it and mount it to something else. The design is parametric and can be adjusted to match individual requirements. Note: This is not OpenSCAD.…
Su-27 Flanker An aircraft planned and manufactured by the old Soviet Union. It features incredibly high combat capabilities and long range flight time, to compete with F-15s from the United States. It is also currently still used in…
Der Blumentopf Untersetzer ist geeignet bis 93mm Topfgröße, kann aber auch nach belieben vergrößert oder verkleinert werden. Ideal geeignet für die Pflanzenanzucht zb Tomaten.
Pflanzkörbe, um Teichpflanzen in gängigen Fertigteichen an den Rand setzten zu können. Die Haken sollten mit kleinen Edelstahlschrauben an die Körbe geschraubt werden.
This is an Optional add-on to the (Un)original Prusa Drybox. Simple rollers, using 608 bearings, that fit with the 18mm aluminium rods of the Drybox. Note : All the files are also available for 20mm rods as an option. The filename…
Zweiteiliger Pflanztopf Two-piece Planter
This is a Support for your Plants!
Print Settings: Supports: NO Resolution: 0.2 - 0.3 - 0.4 Infill: 20% Filament: PETG ABS ASA I printed with 4 walls, 0.4 Layer high and 0.6mm nozzle in PETG
These are Code 61 flange plugs for blocking off open ports on hydraulic systems on heavy equipment. They're lightweight, easy to print, and great for keep dirt out of your system while working on it, or stopping oil flow after removing…
I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…
45 Degree elbow for 4" dust collection systems. I use this piping for dust collection with a flange to mount to a box I am using as a planer stand but it should be useful in any similar situation. The flange hole was modeled after a PVC…
These are Caterpillar-specific flange plugs. For blocking off ports while servicing hydraulic systems. Sizes -12 to -32. A groove for an o-ring is there as well. Great for capping off open ports on control valves while you service…
Airbox flange to 3" (MAF delete) for Nissan S13 Ca18det
This is a snap on flange to terminate 20mm (nominal) flexible corrugated conduit flush with a surface- i.e. drywall/plasterboard. I made this so I can run the speaker wires to my rear home cinema speakers through the walls inside conduit.…
Small model for small pots. Requires no support and can be printed in one piece. Kleines Modell für kleine Töpfe. Benötigt keinen support und kann in einem Stück gedruckt werden.
This is an adapter for an 80mm flex pipe. The walls are 2mm and the diameter of the pipe is 75mm to ensure easy installation. Very easy to print. EDIT: I have reworked the contact plate and adapted the bore. 100 diameter for the holes.…
Somewhere between changing between version 1 and, version 2 - and back again - of the E3D Revo Mount for the Prusa Mini, the M12 flanged nut went missing. Personally, I think one of my cats decided to bat it around - this one probably -…
Simple medium sized plant clip for 10mm rods
Bearing conversion of the axle to reduce vibration. It works very wellIf you want to use a linear rail you have to use the XY joint from here. https://www.printables.com/de/model/855093-k1k1max-x-axis-linear-rail-remix/files
TBD soon: Upload pics of finished installation I wanted to use DT plugs/sockets for an electronics enclosure. Flanged versions are available but not as common. Also, cutting square holes into panels sucks. My version is meant to be…
2020 T- Slot Foot Cap / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
Einfach um Triebe nach unten zu biegen und Blüten so mehr Sonnenlicht verschaffen. Ich kann nicht einschätzen wie stark sich das Filament im Sonnenlicht erhitzt. Daher würde ich helles PLA oder PETG verwenden. Support ist nicht notwendig.
