65 modeli
Gamer Logo Wall Art (AR Fixed & Flipped for Textured Plates - Remix) This is a remix of the original "Wall Art - Gamer Logo" by prodigy8. Improvements: Connected the floating centers in letters A and R – no more detached parts, stronger…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
A lot of people, including me, saw the original model for this fabric and loved it for everything other than the fact that it had to be printed with the top surface up which made it way more difficult to print. So, I edited the original…
This is a remix of @Beaver's original and @Gugowski's remix: This is mostly @Beaver's original design, but made more narrow like @Gugowski's <25mm idea (great idea btw!) I liked @Beaver's cable management orientation better so left that…
Umbrella Corporation Tool Box Multicolor and Multipart with Flipped Logo is a 3D printable model that lets you create your own tool box inspired by the Resident Evil franchise. It is a remix of the Tool box parametric model by Yanev ,…
I find it difficult to understand why so many people use these upside-down, given how much weaker they are for their intended use in that orientation. And yet, it's apparently popular enough that @Genghis' model , and @ericsnis' model…
Original SMX Heinz design of the 3D printed slot 3.00 & 3.25 flipped travel kit. Designed to use with ABS filament. If you print with other filament you may have to adjust shrinkage compensation to get the correct dimensions. Installation…
Camera cable clip for rigging with 1/4" screws. Two variants with different orientations. Original design by GrandCedre.
This model is compatible with the lego system.
I flipped the position of the Apple Watch stand from the right side to the left side. I flipped the iPhone Dock so the glue point is on the left hand side. I also scaled the iPhone dock by 1.03 to fit my particular apple case. It is a…
Tested with 5080 founders edition YYMV. Uses 2 M3x4x5 mm threaded inserts .
Flipped into the correct orientation version of the original model . Printing tips: Use 0% infill Use Seam painting tool in PrusaSlicer to achieve uniformal seam for testing:
I installed a Raspberry Pi Zero 2 W shortly after they came out but found it ran a bit hot, around 66°C at idle because there is limited air flow to the CPU since it faces the Einsy RAMBo board. I worked up a design with a fan for…
Yeston updated there RTX 3050 LP model and flipped the HDMI and DPI ports. This is the updated version for the change.
I needed the door hinge to be on the right side, so I mirrored the appropriate parts. I am by no means the first to have this idea, but I didn't see anyone who uploaded their files. As there is no metal for the door magnets to attach to…
I modeled a replacement slider for the FrSky X20 and X20S RC transmitter that flips the long part of the slider to point down. This is more comfortable for me to use during flying. Be very careful trying to fit this on after printing. If…
I didn't like how the power wires on other mounts for this ISA to SD adapter were positioned, so fixed it. Large cutout also saves print time. Two versions included: BetterMount.stl = Requires an added 15 minutes worth of support material…
This model is compatible with the lego system.
I believe it’s very important not to block the gap between the motherboard and GPU, since it’s the main source of fresh air for one of the 5090’s fans. I intentionally made it as air-unrestricted as possible. Maybe (unlikely) I will make…
Hello! Here is my iteration of the flipped travel kit for the 5080 and 5090FE. For the anti-sag, I ran it without having to screw in the tab into the slotted part. But, if you'd like the extra security, I'd recommend using an M3 (CSM3-8)…
Flipped version, for clearance to motherboard. If clearance is not needed, the other version is preferred. (check other version for pictures too) Please consider reporting back if this worked for you. At least one reply please! ========…
First time I used PETG, it got unstuck at the left edge, but still finished the print OK. Used M3x5x5 threaded inserts to hold down the mainboard. Used self tapping screws to hold the 2 pieces together and reused the original case screws.
My OCD can't handle the upside-down logo so I turned it around for the lack enclosure. Print instructions Perimeters: 1 Resolution: 0.2mm Infill: 15% 1 perimeter is enough for this print and it also makes the text look a better.
Just a flip-flop and a trip to get this to fit in the same spot with minimal effort. Pulled the part into Fusion and mirrored it and trimmed the tab on the side to give the room for adjustment
This is a remix which was made to include the ribbon cable for the Pi's camera while leaving the raspberry pi zero (2)'s heatsink facing outwards . To accomodate the flipped pi you will need to disassemble the back of the einsy cage and…
First off, great idea by Krisas Man for the flipped design. Full credit to him. Secondly, thanks No WaterMark for the ribbon cable path. I did some adjustments: Re-aligned the mounting holes with the actual Pi Zero 2 W dimensions Changed…
"Same guide with insert slot for 1,75mm filament Print with 100% infill." Commenters noted that filament tended to pop out of the guide in the original version, so I simply flipped it. I haven't fully vetted it yet, but seems to work out…
Really liked the original clipper hanger however my SV06 sits very close to the wall and I wanted to hang some clippers on the opposite side (above 32Bit board). Originally printed it and realized that it interfered with the stepper motor…
This is a remix to allow the Crossbow-Filament-Cutter to be mounted fipped on the extruder so that the leaver is on right side. It is only compatible with Extruders using the Sherpa Mini mounting hole pattern. For this mod to work the now…
Re-upload files from Thingiverse repository: “Anycubic Kossel Linear Plus Printer Model STEP file” by spikelee (December 15, 2019)
The charger of my electric toothbrushes always gunked up over time even if I clean it after use. So I quickly designed an upside down holder in blender. Could probably make it use a bit less material, but it is pretty stable this way.…
The model by Goingmad is amazing IMO. Only thing is I wanted this to be on the front right of my printer because I added a reverse bowden tube setup on the right side. This slots VERY TIGHTLY to the MK3 spool holder that you can 3D print…
BTT Manta 8P Mount Flipped SSR DIN Rail Mount
If you need a hinge that flexes, this model is for you. Nothing special about this remix except for the tabs that make it easy to glue down as a hinge. I printed two of these hinges on a Prusa i3 MK3S+ at 0.2mm SPEED (Local library only…
brilliant idea from the original version, but i need the headphone jack on mine facing down for how i use/wear it.
I printed with a 0.4mm nozzle @ 0.2mm layer height. You'll need to add a pause to insert the magnets. I used a little dab of hot glue to make sure the magnets weren't going to wander, but you probably don't need to.
This Oneplus Watch Charger Stand is for people who wear these watches on their other wrist, and/or have their buttons on the other side. Otherwise, the watch face will show upside down. I couldn't figure out how to use the OG STL, so I…
I have my Core One+ MMU3 with (Un)official drybox located above the printer. With my INDX upgrade I want to keep the same setup, because I have not much space around the printer. I just flipped standard filament sensor holder up side down…
A structural remix of the pull copter ring. I only changed two files, so you'll need to get the rest from agepbiz 's pull copter finger ring model . Flipped orientation of the M2 screw so that the threads are in contact with more plastic…
Print out both parts twice each. Then drill two holes in the bottom of the box at the correct distance and screw the parts. Required accessories: 2 x 16mm M5 screw 2 x M5 hot melting nut Print Settings: 0.2 no supports
The original model worked perfect except the screw. It kept breaking even when not over tightening, it would shear after a few days. The idea was inspired by a flipped screw mod for the Ender 3 X/Y tensioner screw. Flipped screw 90…
cgenco has a great design to keep the tension screws from jumping out every time you open up the MMU2. If you like me and flipped your controls to the bottom this wont really work. So I made a few edits to fit on the unit when using…
Pretty much identical to original model, but the ADXL sensor mounts on the backside instead of the front. Refer to the original model's description for more information. Required hardware 3x M3 heat set inserts 3x M3 screws Huge thanks to…
This 2-piece 3D model combines the functionality of two things: your desk phone stand, and a small tripod. Pixel 8 Pro is too heavy for small tripods so I created this to hold the phone leveled at flipped orientation when capturing…
I recently went about upgrading an old Inspiron 3670 that was lying around to be useful and not e-waste. One of the challenges with this is that any serious hardware upgrades necessitated a replacement of the 290 Watt PSU, and the OEM…
Designed this to stop my filament rubbing against the extruder mount and cables, I'm mounting it on my Lack enclosure underneath the printer so it used to rub there. Remix of timqui's great design!
This is an enclosure for the Raspberry Pi Zero 1/2 W when mounted in reverse / flipped on the EINSY enclosure so that the CPU and WLAN can face away from the board for better cooling. No need to print another custom EINSY enclosure. Just…
Slot the clip body into the rim of the box (glue if you want to keep it there) and clamp the lever over the lid to hold it in place. Flattened the grip to prevent accidental opening, suggested by @reemo3dp, tho I think they meant to do it…
Like http://www.thingiverse.com/thing:420714 but with the direction flipped along the diagonal to allow for easier printing. High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Big thanks…
I used Inland black PETG .2mm layer height 240/65
This is a taller Z alignment tool for the Railcore ZLT when the yokes are turned over although it will work with the standard ZLT. Because the ZL does not have bearing holders, it is not required. The model is intended to print large side…
I made this design because i have a bottle of sauce that's nearly empty but it can't stand upside down on it's own so I designed it with a notch for the thread from the cap to the bottle. But it can probably be used for other kind of…
Thanks to @JakubZakrzew_3968341 for his model
The cover combines aspects of other covers and includes these improvements: cutout for wifi heatsink cutout for main heatsink cutouts for both microUSB ports cutout for microHDMI port 2 additional cooling slits 4 nubs to better secure RPi…
Clip the Dell power supply to the edge of your desk
Added two more airvents
A simple re-cut of the "core_one_indx_filament_sensor_holder" to feed the filaments from the top. Height can be adjusted in PrusaSlicer by moving the sensor part further from the mounting one and stretching the connecting block. Works…
This is a bit of a weird one, it actually consists of 2 models overlayed into 1. The step file has 2 bodies and they can't merge for unknown reasons. You'd have to export the main file to print it. I was looking for a flipper version of…
I flipped it to be in the orientation to print, plus made the hole bigger (16mm) to make more room for the focus ring.
This model scraper builds on Yerg's design to create a K1 Plus Scraper replacement. Unlike the double edged blade that came with the original K1 Plus scraper, the ones that I purchased had a single beveled edge. They fit on Yerg's model,…
This is an adaptor that allows you to attach the filament detector in a spot where it won't cause jams when the spool holder is inverted. Mostly for when your printer is in a tight space and you need to flip the spool holder for it to fit…
3mf file contains slightly scaled to fit my phone with case (nothing phone 2), stl file is in the original model's size
I believe it’s very important not to block the gap between the motherboard and GPU, since it’s the main source of fresh air for one of the 5090’s fans. I intentionally made it as air-unrestricted as possible. Maybe (unlikely) I will make…
This is a bit of a weird one, it actually consists of 2 models overlayed into 1. The step file has 2 bodies and they can't merge for unknown reasons. You'd have to export the main file to print it. I was looking for a flipper version of…
Camera cable clip for rigging with 1/4" screws. Two variants with different orientations. Original design by GrandCedre.
![[Flipped] Fast Stringing / Retraction Tests](https://media.printables.com/media/prints/837786/images/6453771_3d35048d-8fed-4942-8f0d-fe2cf30c0954_c924ab62-fc60-48db-91f5-c02c147b34e5/stringing_test_v1_2024-apr-09_11-32-12am-000_customizedview1378487328.png)
![[Improved] Flipped RPi Zero 2W Case and Cover with extra cutouts for heatsinks, HDMI, USB, and hex wrench access](https://media.printables.com/media/prints/2aa7b1f9-38b7-4336-a825-b126347809e7/images/11782945_c563df18-f079-4b52-ad8b-25b5231365b6_2d9e065d-38ee-4fe3-a68b-d98b2d83e589/img_20260120_004754721.jpg)
