213 modeli
This is a model I made for my telescope to protect the interior from dust and debris during transport. It is a 78mm Moonlite Focuser End Cap for Esprit 120mm Telescope but you can resize it for whatever telescope you may have.
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 0.8 MOD gear 60T & 65T for the 2.5" & 3" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.8 MOD gear 60T (for the original focuser wheel of Takahashi FSQ106N telescopes) , which can be applied for focus automation.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope) , which can be applied for focus automation.
Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope), which can be applied for focus automation.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Hadley telescope by Maff is a great design that allows makers for an easy and cheap introduction to astronomy. There are lots of difficulties when using a telescope for the first time, for me one of them was trying to take a picture…
Introduction A selection of remixed focuser options for Hadley , all designed from scratch with 45deg threads and 3mm pitch for vastly improved printability and operation. Mostly remixes of Hadley focusers that are out there in the wild,…
(From time to time I am asked "Will it work/Could it mount on my X telescope?" for various values of X. Well if I had an X, I would make it work. You could send me an X! But it's cheaper if you make a simple adapter plate - If you don't…
Updates! Reorganized parts listing for clarity About After spending some time trying to use a telescope camera with the wonderful Hadley telescope by Maff , I decided I needed a focuser that didn't rotate. Rather than wait, I decided I'd…
This is a modified mounting plate of 1.25" Crayford Focuser for telescopes by aeberbach for use with Hadley telescope. This focuser is a massive upgrade in functionality compared to any printed helical focuser. Attaches to the Hadley UTA…
I am proud to present to you “ Hypatia ”, my take on a focuser for the Hadley Telescope ecosystem. It combines what I consider to be the best features in other designs, and some ideas of my own: the Crayford style of focuser - which uses…
Non rotating helical focuser for a precise focus which can easily be attached to your telescope, or a precise variable extension for photography and visual observing. The orientation of the camera is maintened during the focusing…
I was looking for a good solution to make the focuser motor work with my Samyang 135mm lens on the OAT. I decided to just design my own. I think this ended up working well. There are two sets of rings, small and large. The small rings…
V2 3D printed 1:10 reducer for crayford focusers Update History 2) Integrated needle mod and V1 small button alternative - Integrated needle mod within original file. You can still like and download here or from remixes list. - Added…
UPDATES: Added version with mounting screw holes countersink so knob does not collide with screw head for those using full sized screw heads. This focuser is based on the Crayford design, where a smooth pinion is rolled along a smooth…
This needs to be printed with fine layers, try 0.2mm. Use the test prints first (or even shorter slices in your program) just to be sure it has nice action. I might recommend a slightly taller layer height for the inner screw, to prevent…
Die Kugellager werden im Gehäuse mit DIN 914 M5 x 40mm Madenschrauben befestigt. Die Kugellager sollten 5 mm Innendurchmesser, 10 mm Außendurchmesser und 4 mm Breite haben. Für den Antrieb wird eine 4 mm Stahlstange verwendet. Um eine…
Crayford Focuser 2inch by jackleone12 - Thingiverse Found this focuser over on Thingiverse and re-engineered it for the Hadley project. It is far superior to my rack and pinion design, smooth operating with no grind or slip at all. Has…
Note: I've added another version of this mod that doesn't require cutting the focuser tube, but adds an additional 5mm to the length. The adapter is called no_cut_m58_focuser adapter. This is a set of adapters to add a 25-55mm helicoid…
I had some issues with play in the non-rotating focuser from ballanux and therefore designed this counter nut (based on the collet nut), in order to get rid of the play. Works good enough for me. Additionally the focuser position can be…
3D printed 1:10 reducer for crayford focusers Update History Update 2 : V2 now available here : V2 Crayford Focuser Reducer 1:10 Update 1 : Added a fillet on the reducer support + added all step files Informations The exact reduction is…
A simple plug for a 1.25 focuser. The beveled edge makes it easy to insert and the fingerhold makes it easy to remove. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Category: Physics…
Astronomical telescope dual focuser 4:1 knob v2.0 For M4 steel shaft. < Filament > anything. < BOM > 676zz(mr106) 2ea 6704zz 1ea M3 hex sockethead cap screw 20mm 3ea M3 hexagon nut 4ea M3 socket set screw 8mm M4 socket set screw 8mm M4…
Description Introduction A selection of remixed focuser options for any of the Hadley scope family that can take a 2" focuser (Caldwell, Caroline, Tycho, Bradley and more); all designed from scratch with 45deg threads and 3mm pitch for…
It's an adaptor for a cheap focuser to fit the Hadley telescope. In particular: https://www.aliexpress.com/item/1005003139555248.html?spm=a2g0o.order_list.order_list_main.16.65901802TIfIGr Uses m4 nuts and bolts 20mm - 35mm
Inexpensive diode laser cutter engravers rarely come with a enclosure. This can be a safety hazard for your eyes. This is a simple trick that costs pennies and reduces the risk substantially. It also helps with laser focus and directing…
This is a rebuilt version of wigglememore's Hadley 1.25" Focuser Options to attach to the telescope body using M5x12 screws. This remix is intended to be used with the Hadley Neumo telescope The model is already oriented to print without…
I wanted to attach the ZWO EAF to the Baader Diamond Steeltrack 2" Focuser, and the bracket included with the ZWO EAF isn't really suited to the Baader. I've left a bit of play in the bolt holes, and the focuser brake hole should have…
dual speed (4:1) focuser v2.0 : Those who have previously printed can print the file again with "_V2" appended to the file name. 35mm focusing travel Includes 2" to 1.25" adapter Smooth dual speed (4:1) knob << For dual focuser knob…
I needed a bracket to mount my ZWO EAF to my Vixen R200SS telescope's focuser. Modelled and printed this in CF-PETG, I'd recommend a CF-fill filament for stiffness reasons as regular PETG was quite bendy. Needs 4x M3 screws and washers to…
Mix of two focusers from calli and jslafas with my edits to make it suitable for nema 14 and basically no disassembly required except removing VisualBack and screwing it back with spacer and base UPDATE I have added baseplate for nema 17…
This is a quick and easy printable piece of your astronomy kit. You can never find one when you need one. Printing Tips: Print with the top down. Filament - PLA works well Infill - 20% for is fine Layer Height - ..25-.30mm Supports - None…
The focuser has a female M42 thread on the telescope side and a male M42 thread at the eye piece/camera end. The focus travel is approximately 15mm in 3 full turns. There are 1mm increment marks on the focus ring. The sliding core and…
ballanux's Non-rotating helical focuser ring, remixed with wheel
This is a focuser for use with the OpenAstroTracker - allowing you to focus your camera lens remotely from the controller or controller attached computer (the lens & camera will be set to manual focus, and this assembly will allow…
I modified the original Hadley focuser parts in three ways: I made cleaner thread starts I added grooves to hide the z-seam in I removed the chamfer around the base of the inner focuser The cleaner thread starts allow for two things… The…
Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave This Remote Electronic Focuser was designed to be used with my 12.5 inch Dobsonian Telescope but can be modified to focus most telescopes. 3D Printed in…
This is a telescope focuser. You'll just need a few screws. I don't know the exact screw sizes, but it's relatively easy to find one that fits. I printed using ABS in my Creality Ender 3 V3 Se, but i guess that you could use PLA or PETG.…
A focuser mount for the hadley and a cheap aliexpress crawford focuser. This is the focuser that I had purchased off of aliexpress, cheap $15 focuser.…
I noticed that the drawtube could bind in the original version because it was not supported by a tube without notches. So I added a support extension and also a few notches to allow for more movement. Works great now. Note this is the…
A mod to Arca Swiss Plate and Top Bracket to use m4x6x6mm threaded inserts. Also focuser mount for a NEMA17 motor. Included step and fusion file for the NEMA mount since it is a complete redesign. Could be easily modified for different…
2 inch focuser for telescopes, 72mm tall + 26.5mm travel. So far the only mounting plate is for GSO 6" Newtonian tube, but if you need another, drop me a message and I might be able to help. Or you can change dimensions in the first 2…
This focuser aims to solve a couple of problems: 1. Aside from the motor, it needs no parts (belts, gear, etc) 2. It stays fixed to the lens (not unique, but useful) 3. The gear design increases contact patch, reducing backlash 4.…
As a beginner, it was difficult for me to work with a self-printed focuser. I therefore designed an adapter for a Crayford 1.25 inch focuser, which can be bought on Aliexpress or Amazon. The adapter can be installed instead of the…
Update (04/05/26) - fixxed eyetube on very short version to have the thumb screw m4 insert hole in the correct place. Update (01/05/26) - Added new very short version for the Travel Telescope V3.0 only (due to the mounting points being to…
DIY focuser for astrophotography with a magnetic flange This is a simple, inexpensive focuser with a magnetic flange for quick and easy assembly without tools. When I was looking for a cheap way to get a focuser, I came across a project…
Much like my other model for blocking light leaks near the primary , this model is to address the area around the focuser where it is very easy for light to get to the camera sensor. The black ring that holds the set screws for the 2"…
This is mounting bracket for a NEMA17 motor to attach to the Crayford focuser on the Celestron Omni XLT 150/750. My understanding is that there is little standardization on Crayford focusers, so this would likely have to be modified to…
Open focuser is a 2-inch 3D printed linear-rail based focuser for telescopes and other camera equipment. It has been tested successfully with a 10 LB payload and depending on the stepper motor driving it, it should be able to handle much…
Remixed the main button so it can be installed on a Skywatcher Crayford focus button. If you want really smooth operation, check out the anti-wiggle needle mod here:…
A simple cap for a 1.25" Telescope focuser.
I was looking for a dual speed focuser retrofit upgrade kit for Sky-Watcher Flextube 300P. The only one I found was the Lacerta one, but it's expensive and not easy to get in the US. I decided to design my own. Luckily I found knighttm's…
This model allows you to mount the ZWO EAF to the Meade Microfocuser after removing the original motor and housing from the Microfocuser. Useful when you want to remove your LX200 from the fork and use it on an equatorial mount and…
SF_Case_v3.stl (modified 2021.12.5) - Compatible with latest DHT11 (Long Board type) SF_Bottom.stl (modified 2021.11.30) This is very cheap auto focuser compatible with Moonlite Focuser. You can control this focuser with Moonlite Focuser…
MagneTicFocuser [MTF] without electronics This is a second variant of the original [MTF]: https://www.printables.com/de/model/251874-magneticfocuser-mtf I designed them to run this system on an OnStep controller. OnStep offers the…
So, stock TS-Optics (GSO) monorail focuser has plastic body with those stupid curves and 0 extra holes. I didn't want to remake the whole part, so i came up with this. Print this part, add two M4 threaded inserts and sandwich it on top of…
WIP Remix of arca swiss plate and top bracket for better heated insert fit. Inserts are pressed into opposite side from which they will be pulled to help avoid pullout in case you have junk inserts like me. After pressing in the heated…
No modification is done to the Hadley UTA. Pick all components from the Crayford reducer V2 except the main button.
Elektronic focuser with NEMA17 for Newton or Refractor with 2" dual speed Crayford 1:10 for OnStep telescope goto controller or my Focuser Hand Controller (FHC) . Wiring diagram and PCB on EasyEDA FreeCad source code on GitHub BOM: 1x…
This is an improved version of the improved version of the logitech c270 manual focus system. I love the way the original file was, but I want to put a led ring around the camera lens in order so have a better image on Octopi, so I edited…
This focuser will work on the Leavitt standard telescope (v1 only) and the Leavitt “Lite” metric version. I liked the Hadley remixed version that supports 1.25" eyepieces only and is easy to use. Modified the focuser to support…
A focuser cap, in 0.965", 1.25", and 2.0" sizes. Simple! Source on OnShape . Also check out other telescope stuff .
Remixes the main knob so it can be slip-fitted on a skywatcher ST80 stock focuser knob. If you want truly smooth operation , see the anti-wiggle needle mod here :…
Original model and build instructions here: https://marcosatm.com/2020/06/04/2in-crayford-focuser/ This is based on the nut version as I found the heatserts for the bearings difficult to get right. I've added a lug to secure the reduction…
I created this adapter to be able to use automatic focusing during my astrophotography sessions. A small Nema 17 motor is driven by an Arduino running Arduino ASCOM Focuser Pro2 DIY download | SourceForge.net and is controlled by N.I.N.A.…
I designed this simple adapter for my 106mmD 900mmFL telescope rather than buy this adapter for $45 (assuming it'll ever be in stock): https://explorescientificusa.com/products/vixen-telescope-60mm-ring-with-t-thread-adapter This adapter…
These simple plugs can be used when you inevitably drop the plastic plugs that came with your telescope in the observing field, never to be seen again. Print out a few, and be the most beloved astronomer at the star party when others make…
It's designed with a 20-teeth pulley and a 300mm GT2 closed loop belt in mind. The focus wheel has 118 teeth. This model only includes the baseplate and the focus wheel. You need to download the remaining parts from:…
I wanted to experiment with a way to focus Hadley more precisely, so I have created this fine focus assembly that can be added onto the 1.25" focuser remixed by @wigglememore. Note: this was modeled using the latest version (v2 at the…
A simple resize of the hex cavity to snugly fit an M5 nyloc nut, for metric users.
I printed mine in PLA, 20% infill and supports.
This isn't really a remix so I didn't add that info, but I want full credit to go to Maff for his supremely cool telescope model that I am enjoying the crap out of, and for inspiring me to try something new (astronomy) and continue…
This is a fine Focuser based on a design from wal20. It uses two #6-32 screws to tension and lock on a piece of steel plate. Beneath the ring are a piece of felt to ensure a good lock down. Print instructions Printed on a Prusa Mk2,…
1.25" Crayford Focuser base for 140 mm tube can be used with: https://www.printables.com/model/125438-125-crayford-focuser-for-telescopes/comments/1319626 need to drill 4 holes to attach the tube need to insert 4 thereaded inserts M3 to…
Base plate for 114mm Newtonian telescope with M42x0.75 female thread, designed in Fusion360. I'm using this base plate to attach my Svbony 161 Double Helical Focuser ( https://amzn.to/3NQSW8k ). You will also need M42x0.75 male to M31x0.5…
This is an reinforced version of the original model. The base plate has some additional supports. The original Model can be found here: https://www.thingiverse.com/thing:4424419
After acquiring my longtime dream astrophotography scope, a 10" Truss Tube RC, I went through the process of making it the imaging beast I knew it could be. After taking care of known issues, like the baffle tube not being long enough, I…
Someone in Celestron thought it was a good idea to use a metal pinion (gear) over a plastic rack. Obviously the metal part was going to grind the plastic rack. They don't have replacement for this older model. So.. I replicated the…
Printed in Polymaker ASA, but PETG and ABS should work fine.
I modeled the Gemini Automatic Focuser Pro, to help anyone doing related projects. The functional parts are measured with a caliper, the aestethic parts are approximate.
Mount to ZWO EAF autofocuser for Celestrone Rasa 8" telescope.
The stock focuser for the SkyWatcher Starquest 130p Newtonian telescope is quite basic, and not great for astrophotography. It is quite tall so doesn't give much room when trying to get focus with a camera, and its also a little wobbly. I…
Focuser base plate for 114mm telescope with male M42x0.75 and female M31x0.5 thread. Category: Physics & Astronomy
Nema 11 mount for focuser. BOM: Nema 11 motor. I have 28SHD4205-30Z. 4x M2.5 bolts GT2 16T wheel - motor GT2 32T wheel, bore 4mm - focuser closed loop belt 140mm
I needed a dustcover for my Explore Scientific Refractor Telescope, good thing there is 3D printing :) M68 x 0.75 thread for Hexafoc or maybe other focusers Print it in 0.1mm layer height for a clean thread
Version 2 I have added space for a gx12 connector. So it can be disassembled and transported more easily. The motor I use is a nema 17 "pancake". It is the smallest stepper motor I have. Version 1 Motor support to make the focus automatic…
Drawing based on 150 mm mirror. 1.25 inch focuser. It has an adjustable length and is completely compact. All parts are
Sasha D's Crayford-style focuser for the Hadley telescope is excellent! I highly, highly recommend it. Focus adjustments are MUCH smoother with the Crayford-style focuser. I ended up stripping the plastic threads on one of the setscrews…
This is something I whipped up to go stargazing with a friend. It allows you to take pictures through the telescope with pretty much any Sony E-mount camera. Tried with the SkyProdigy 130. Instructions I printed mine with black PLA, two…
See the instructions on the original.
Adaptor plate to mount crayford focuser to the Orion StarBlast 4.5 reflector. Adaptor Plate mounts to OTA with factory hardware. Crayford focuser mounts to adaptor plate with M3 screws and heat staking threaded Inserts Crayford focuser…
I wanted to be able to attach 1.25" oculars to my old newton 114mm. So I decided to modify the base of https://www.printables.com/model/265768-non-rotating-helical-focuser-with-collet-for-hadle Diameter of my tube is 140cm. I add STEP…
Astro focuser with small stepper motor 28BYJ-48 or MP35EA Focuser is compatible for my EAF holder: (as ZWO EAF replacement) SCT Newton Samyang 135mm ED TS 76EDPH (Sharpstar) Wiring diagram and PCB 1.0 on EasyEDA Wiring diagram for smdPCB…
Expand your telescopic view with our 2-inch Focuser Extension Tube. Elevate your visual and astrophotography experiences by achieving ideal focus distances. Upgrade your setup and optimize your scope's performance for breathtaking…
I've created this nema 11 stepper motor mount for my ASKAR FRA 400 telescope. I give as well my dew shield for this scope. You have to found the adapter piece (coupling) 2.5mm to 4mm (stepper to focuser) as I've not designed myself.
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 25% /100% Supports ............................. enforcers only…
Probably there are better ways to do this (teflon film for example), but this mod is still better than stock. Main benefit is that if you have a 3d printer you already have all the parts. Completely degrease the focuser shaft and focuser…
Remixes the main knob so it can be slip-fitted on a Bresser Hexafoc Focuser. Tested on Bresser AR102s/600 refractor but it should be working for any Bresser Hexafoc 2.5" Focuser (?)(TBC). Adds an attachment plate that fits the focuser…
M75x1 threaded dust caps, male and female, for astronomy. These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is used on Feather Touch 3.0" focusers. I print these dust caps out of PLA+ and…
its a print that takes light from a led and condenses it to a point that can be adjusted by moving or flipping the lens which i got from one of those phone vr headsets that you get, use for 5 minutes, get nauseous and the put in a drawer…
![MagneTicFocuser [MTF]](https://media.printables.com/media/prints/251874/images/2262095_7bd3d163-9887-4ca1-929f-f1d37ed8fc1b/magfoc_pg27.png)
![MagneTicFocuser [MTF] GX12](https://media.printables.com/media/prints/344483/images/2935363_da8b2c08-f1fe-4c78-aed0-c6490a1b7bd8/mtf_gx12_front.png)
