Wyniki wyszukiwania: fs

Z offset calibration print

Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…

X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)

Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…

Ice cream handle and drip guard for kids / Eis Handgriff und Tropfschutz für Kinder

Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…

tortue porte-clefs - turtle keychain

Autre modèle de tortue :

Stihl FS91 and FS31 Trimmer Wallmount

A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…

Deflector for Festool FS/2 Guide Rail Remix / New version

I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…

Red Dot Agled Offset Mount for RMR / RMRcc / RMSc footprints

Nozzle Z Offset Search - Generic Version

Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…

Leafs - XL texture roller

Imprints clay with a beautiful leaf texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…

Floating book shelf / invisible bookshelf / magic bookshelf / floating books shelfs

In the pictures I only used one shelf (base) for each book stack. Correct print orientation is crucial for stability, more below. My Girlfriend needs a new bookshelf every month and she wanted to try an invisible one, so I over-engineered…

Hardworking dwarfs, gnomes for the garden

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…

Prusa Mini Z-Offset

Kalibrierung Z-Offset

UFS-105 Copper Pipe Diameter Gage, External Measurement

This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…

Einkaufswagen Chip Schlüsselanhänger

Schlüsselanhänger mit FFW (Freiwillige Feuerwehr)

Gurt-Dummy & Einkaufswagen-Chip

Viele kennen das Problem vielleicht: Hund auf der Rückbank und laufend piept das Auto, dass man den Gurt anlegen soll. Mit diesem Gadget kann man das Problem lösen. Des Weiteren kann man es auch nutzen um einen Einkaufswagen zu nutzen…

Einkaufswagen Chip

Immer beim einkaufen fehlt mir ein Chip oder eine münze für den Wagen

Porte-clefs St Valentin - rose

Porte-clefs St Valentin - rose en creux

GFS Light Battery Box AA - Vase

Write in the comment if you want me to design boxes for AAA or 18650 batteries. Model inspiration from CoMet Redesigned. Reduced dimensions. Improved alignment with batteries. Three versions Box for 2 x AA - 4 g. Box for 3 x AA - 6 g. Box…

Watering can attachment for Seedlings (parametric FreeCAD file) - Spar-Aufsatz für 10 l Gießkannen

This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).

Dethleffs Haken

Ich habe diesen Haken als erstes Projekt in Fusion erstellt und mir das Original von Dethleffs zum Vorbild genommen. Er ist keine 1:1-Kopie aber dicht dran und doch so weit weg, dass ich das Copyright von Dethleffs nicht verletzt habe.…

MK3S+ and MK3S FS Cover 6mm OD Adapters For PolyBox or RepBox with 6MM Tube (PTFE)

MK3S+ and MK3S FS Cover 6mm OD 4MM ID Adapter For PolyBox or RepBox with 6MM Tube (PTFE) based on the Original Prusa MK3S+ and MK3S FS Cover. Note: This GCode is for the MK3S+ the GCode for the MK3S is located under the User Print Files…

Sanding disk holder / Schleifscheibenhalter 125mm Durchmesser

Deutsch: Ich hatte auf Youtube ein Video zu einem ähnlichen Halter gesehen (aus Holz) und wollte das ganze für den 3D Druck designen. Halter funktioniert prima und man sollte die Scheiben direkt auf den Exzenterschleifer (einfach an den…

Alles Gute zum Geburtstag Torten Aufsteller

nach 3mm Druck habe ich die Farbe gewechselt

FSL-Tank track bracelet

Comfortable and sturdy bracelet made for tank fans. Has easy clip fastening. Assembly: Cut filament in right lenght (about 15 mm) and gently insert with aligned another track element. Pohodlný a pevný náramek ze článků pásu tanku pro…

Záložky do knihy se zvířecími motivy (Bookmarks to a book with animal motifs)

Po zkušenostech s modelem https://www.printables.com/cs/model/415374-zalozka-do-knihy-ctyrlistek-bookmark-cloverleaf jsem namodeloval tento model. Neničí stránky knih jako výše zmíněný typ záložek. After experience with the model…

MINI-minda-holder with 3 deg offset.

Hot end clogs on the mini are attributed to heat creep and poor PFTE setup. I've managed to fix this issue by not installing a aftermarket heat break but by adding better heat paste and re-routing the hot end - thermister and heater…

Mini 13 Headphones/Earmuffs

I saw the head with headphones by Master Gadget and liked the idea, but didn't want to print them attached to the head. My daughter wanted a cat head and so I decided to create some that could be attached to any head. Enjoy! Printing: I…

Griff für Handbremse Wohnwagen Dethleffs handbrake handle caravan

nach konstruierter Griff für Handbremse für älteren Dethleffs Wohnwagen. der originale griff hat sich aufgelöst und zerbröselt. Im Netz habe ich nichts gefunden, also habe ich die noch vorhandenen Fragmente mit 123D design zu einem neuen…

Five star rim with hub cover 1:10 Tamiya ex12 mm offset 4mm+ rc car

I designed five star rim for a Tamiya rc car compatible 1:10 model, 52mm diameter, 26mm width, 4mm hole and 4mm positive offset. There is also the hubcap and the tool to screw it to the rim. Print with a layer of 0.15 otherwise the tool…

Einkaufschip mit Loch

Einkaufschip mit Loch Am Stabilsten mit 100% Infill

Dethleffs Trend 7057 Motorhome Waste Water Key

Waste Water Key for Dethleffs Motorhome Grey Waste, we have glued and put a screw in the tighten it (also put some duck tape on to make sure its tight) at moment its working very well

porte-clefs St Valentin - love

porte-clefs St Valentin - love

einkaufswagen,chip,buchstabe N,

Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…

Halterung für/ Bracket for ABUS FeuerStopp AFS625

Wichtiger Hinweis: Diese Halterung ist ausschließlich für den statischen Einsatz im Innenbereich vorgesehen. Er darf nicht in einem Fahrzeug o.ä. verwendet werden. Important note: This mount is intended for static indoor use only. It must…

MEPLA 538.002.45.01 - Ersatz für Kunststoffschiene-Halterung

Object Description: Ersatz für Kunststoffschiene-Halterung 538.002.45.01 von MEPLA. Diese wurde in Häcker-Küchen und von anderen Küchenherstellern in Schubladen verbaut. Die Schienen sind nur noch selten gegen gutes Geld oder vielleicht…

Box for Rhutex threaded insert tools / Box für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8

Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.

Einkaufswagen 1 Fr. Jeton

Jeton in der Grösse eines 1 Fr. Stücks, um Einkaufswagen zu entsperren. Gedruckt in PLA, 100% Füllung.

Brillenhalter als Monitoraufsatz / Glasses holder as monitor attachment

Wo ist doch gleich meine Bildschirmbrille. Klar doch - auf dem Monitor. Damit ich das sagen kann, habe ich mir diesen “Brillenstuhl” gedruckt. Er ist für eine Monitorbreite von 28 mm ausgelegt. Falls ihr eine andere Breite benötigt,…

Porteclefs guitare music man

Porte clé aux courbes de la belle guitare music man

Harley Davidson Style Shopping Chip / Harley Davidson Style Einkaufschip Black / Orange

Einkaufchips die ich immer im Einkaufswagen stecken lasse, damit sich der Mensch nach mir im Supermarkt, darüber freut:-) Karmapunkte sammeln :-) 24.25 mm x 24.25 mm x 2.37 mm in der Größe eines 50ct Stückes. Zweifarbig, Black / Orange,…

Star Wars OnTop for Pen (TIE + R2D2) - Star Wars Aufsatz für Kugelschreiber (TIE + R2D2)

Star Wars OnTop for Pen (TIE + R2D2) Attachment for the Ballpoint pen Gyroid + Cubic: https://www.prusaprinters.org/de/prints/126323-pen-gyroid-cubic-with-holder-kugelschreiber-gyroid Simply swap the screw and put the OnTop in the holder.…

Atomos Shogun 7 Mount for Sony NEX-FS700

A couple of years ago, I purchased a Sony NEX-FS700 second-hand for some random filming projects. However, I did not actually receive the rosette handle for the camera. Leaving a bit of a void in the overall look of it. Initially, I…

Extended Stand-offs 50 mm for M4 screw

You need just one hook to hang a ceiling light and at least three of theese stand-off sets for leveling. I use a cable tie to hang a lamp in one point (between the lamp and one already installed ceiling hook), than I tie the cable tie. At…

Záložky do knihy se zvířecími motivy - čtyřlístek (Bookmarks to a book with animal motifs - four-leaf clover)

Záložky s motivy zvířecí kůže nebo srstí a čtyřlístkem. Bookmarks with motifs of animal skin and four-leaf clover.

Display labels / Aufsteller / Beschriftung

This display label (12 x 5 cm) is made to be used as descriptive label in an exhibition. It is reinforced on the back, so that it does not bend. It can be used in two angles, see picture.

MK3S+ - Mosaic Palette 2S FS cover

Prusa MK3S+ printer filament sensor cover for Mosaic Palette 2S.

Porte-clefs de Pâques

Impression directe sans support. Le modèle est un peu petit. Le plus grand est imprimé à 130% et fait 5cm de haut.

Vase with motifs SGA ZPM

Pro spodní detaily bude dobré klidné tisknout 0,2 tryskou :-) For the lower details, it will be good to print with a 0.2 nozzle :-)

KC Chiefs Easter egg

i was asked to make a kc egg for a friend, so i did. enjoy

Haar-Trimmer-Aufsatz 12mm

Haar-Trimmer-Aufsatz 12mm, passend für Carrera Classic Modell 22163903 Art. 5835

Clefs de rechange pour jeu Secret Identity

couches de 0,2 Changement de couleur à 1,20 1.60 1.80

Rounded Z Offset Calibration Test

Simple rounded square for z offset calibration. I changed out the auto leveling sensor MINDA for SUPERPINDA. Being new to 3d printing I was getting horrible prints. I eventually figured out it was the Z offset and was able get my print…

Support de clefs USB de bureau

Support de clefs USB de bureau. simple et pratique.

Toronto Maple Leafs Nylander coaster

Willliam Nylander #88 Coaster

FLYSKY - FS2A 4CH AFHDS 2A Mini récepteur - Enclosure

Compatible avec toute radio de protocole AFHDS 2A

Offset XY INDX calibration - 8T

Read the instructions of the original model: For PrusaSlicer 2.9.6, the offset can be changed in the printer settings, inside each extruder (option name "Extruder offset"):

REMIX with 6x3 magnets - Box for Ruthex threaded insert tools / Box für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8

just made the hole bigger for D6 W3 mm (6x3) magnets.

Porte-clefs 2024 multicolore avec bouteille

Impression de la bouteille en creux : Le texte est imprimé en 4 couches pour une hauteur totale de 0.65mm sans boucle. Le corps est imprimé ensuite avec une levée de 0.8 au lieu de 0.4 pour éviter les crashs. Impression de la bouteille…

surfski / kayak / piragua

Surfski hecha a base de las formas con las que se construye con madera, en la vida real, y enlazándolos con unos perfiles longitudinales, que sirven para ir dándole volumen, y creando un conjunto más compacto. El objetivo, es crear una…

Earmuffs - Magnetic Belt Holder

Your hearing should never be taken for granted. If you already use earmuffs to protect your hearing, great!! This EDC device is for you! Whether you are at the range, in the workplace or in your workshop, you will appreciate this quick…

Toronto Maple Leafs Matthew Knies Coaster

You can also flip it around if you don't want the build plate textured finish on the top surface. :)

Bitbox für große Bitaufsätze

Mit diesem Set können Sie sich eine Bit-Aufbewahrungsbox drucken. Dabei können Sie 8 große Bits in die Box stecken und mit einem Drehverschluss oben zuklappen. Außerdem können Sie die Bits mit 8 einzeln gedruckten Schiebern und…

Pattern Offset Guide

This is a set of offset guides that can be used with the, "FastCap Long Nose Marker". The “core part” will give a ¼" offset. There is a ½" and 2" guide that the core part will slide into. You can see what I mean in the section photo. You…

Replacement Rail for Dethleffs caravan drawers

Printing with the smallest side on the bed (elongated 'H') with brim so it won't fall off. That way it will be the strongest in the direction it matters the most. Can be printed in PLA or PETG, PLA worked better for me

Einkaufswagenchip Wasserstoff / H2

Ich fahre manchmal ein Brennstoffzellenfahrzeug das mit Wasserstoff betankt wird. Da ist es immer gut, einen passenden Einkaufswagenchip dabei zu haben.

Volksfräse VF1: Mutteranschläge für die Z-Achse der Kugelumlaufspindel

Diese beiden Anschläge werden magnetisch am Fest- und Loslager der Z-Achse der Volksfräse VF1 hinter der Spindelplatte montiert. Sie schränken das Spiel der Kugelumlaufmutter nach oben und unten genau um die Längen ein, dass die…

IKEA Bathroom Sink Plug Stand / Aufsteller für IKEA Waschbecken Stöpsel

The plug of my IKEA Bathroom Sink stopped the drain a bit too well. It kegt closing even if not intended. So I designed this littke stand for it. Der Stöpsel in meinem IKEA Waschbecken schloss den Abfluss immer wieder von alleine, also…

0.8 MOD gear 60T (for the orginal focuser wheel of Takahashi FSQ106N telescopes)

0.8 MOD gear 60T (for the original focuser wheel of Takahashi FSQ106N telescopes) , which can be applied for focus automation.

Aigner Hilfsanschlag Adapter für Felder Hammer A3

Befestigungsanbindung Adapter / Montage für FELDER Hammer A3-26 / A3-31 / A3-41 – Hilfsanschlag von AIGNER Ich habe eine passgenaue Halterung entwickelt, die genau in den Anschlag der Felder Hammer Abricht-/Dickenhobelmaschine passt,…

ZooZee Robot Vacuum Charge Station Wall Offset Backplate

This is a wall backplate for the charge station of a ZooZee robot vacuum. This backplate will offset your charging station from the wall, in case your wall is uneven or you want to run wiring behind it. The offset has a clearance of 15 mm.

Taino gas barbecue knob slip-on ring | Taino Gasgrill Drehknopf Aufsteckring

This is a replacement trim ring for the Taino Platinum 4+2 gas barbecue. The ring is placed on the knobs instead of the original chrome rings. I have printed the ring as a multi-material version with TPU on the inside and PETG on the…

Desk bracket for Dethleffs camper

I designed the bracket for a work mate, he ask me if I can build him a less slipery Clamp for his Dethleffs Camper desk, so that the desk is more sturdy when clamped on the Rail. The TPU coat is only 0.4mm thicc, the stability of the…

Metrox / Benta 2 Liter Milchkanne - Aufsatz zum Ausschenken

Toller Aufsatz zum tropffreien Ausschenken aus einer Metrox oder Benta 2 Liter Milchkanne. In den Deckel für den Ausguss passt ein Gummi-O-Ring 31.34mm x 3.52mm, den man im Baumarkt im Sanitärbereich kaufen kann. Ich empfehle, mit ABS-X…

Dethleffs Stangenhalter

Basierend auf dem schon von mir entworfenen Haken für die Dethleffsmultifunktionsschiene in der Küche ist nun dieser Halter für die Aufnahme einer 6mm Alu-Stange entstanden. Dadurch kann ich die berühmten Dosen von Ikea anhängen. Was ihr…

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope)

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope) , which can be applied for focus automation.

Einkaufswagenchip

Das Modell wurde von mir selbst erstellt und Modelliert. Das Beispielbild (Titelbild) wurde mit KI generiert. Ein Einkaufswagenchip / Token mit einem Loch für den Schlüsselanhänger zum holen eines Einkaufswagen, praktisch wenn man keine…

Shopping Cart Coin - Shopping Chip - Einkaufswagenchip - Einkaufswagenmünze - Shopping Cart Token - Trolley Token - Shopping Cart Chip

This shopping cart chip is designed for shopping carts in the EU/Germany. The chip is made of durable material and has a special shape that fits perfectly into the slot of a shopping cart. The chip is easy to use - Just insert it into the…

THE TEST DISC | Z-Offset Calibration Disc

THE TEST DISC Simple, yet VERY effective way to dial in your Z-offset to perfection. Notice the change in the image. From right to left, as I adjust (Baby Step up/down) the z-offset. Example: I started at a z-offset = -0.98 (which felt…

Toy Handcuffs with Key (print-in-place)

These print-in-place locking handcuffs print without supports. I put in a comfortable number chain links to make them suitable for casual wear. That is, you could wear them at a party and still, say, eat and drink. And most importantly,…

Rectangular Spiral Z-Offset/Bed Level Test

General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…

Cartographer probe nozzle offset tool

This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…

Z offset test

100mm x 100mm x 0.2mm sheet to test z offset and bed levelling.

Ender 3 S1 Zero Offset CR Touch Mount

This is a replacement backplate for the Creality Ender 3 S1/S1 Pro Sprite Extruder that moves the CR Touch probe inline with the nozzle on the Y axis producing a zero probe offset. Many people are having issues with automatic bed leveling…

4.7L Mini ITX case, easily printable (2 major pieces), sandwich layout, no extra thread inserts, standoffs or feet required

This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…

Creality K2 Plus CFS desiccant box + optional lid

Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…

Heavy Duty Guitar Wall Mount (2 SIZES & WALL OFFSETS)

Heavy Duty Guitar or Bass Guitar Wall mount hidden Screw Design. Fix the bracket to wall then slot mount over Comes in - 53mm(approx internal prongs) - 53mm neck slot with 5mm wall offset - 53mm neck slot with with 10mm wall offset - 43mm…

8-in-1 Z-Offset First Layer Calibration

DISCLAIMER: Use at your own risk! Not responsible for damage to your printer or accessories! Important: Always restart your printer after using this file! This file uses the G92 command, which changes your printer offsets. These offsets…

Einkaufswagenchip - Shoppingcoin - Einkaufswagenlöser

Shopping-Cart Coin Simply insert it into the slot, release the shopping cart and pull it out again. Corresponds to the size of a 1 euro coin. Einkaufswagen-Chip für alle Einkaufswagen ohne Schublade Einfach reinstecken, Wagen lösen und…

Print-in-place handcuffs

Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…

AD5X IFS Tubing Removal Tool

As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…

IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…

Irish Handcuffs - V2

UFS-094 More T-Handle Hex Allen Key Wrench

Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…

K2 Plus - CFS Riser, Ventilation, and Storage

Update 2025.02.06 Some people have reported that when they printed, the tolerances were too tight for their printer to handle. The original, now called “Tight”, version has tolerances of 0.14 mm. There is now also a “looser” version that…

2026 - Lucky charm with shopping cart coin / Glücksbringer mit Münze für Einkaufswagen

Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…

Offset XY dual extruder - Idex calibration

This is a file to make it easier to interpret the X-axis and Y-axis calibrations Este archivo es para hacer más sencilla la interpretación de los desfases del eje X y el eje Y Print this file with the first extruder ----…

UFS-138 Eiffel Tower - More Realistic Improved for Printing

New improved version for 2026. It is broken into three parts. https://www.printables.com/model/1622682-ufs-170-ultimate-most-accurate-eiffel-tower-for-it Please send me your feedback. Thanks. I visited France this year and I was in Paris…

Parametric, stackable PCB standoffs (M2-M14 holes)

These are fully-stackable PCB stands and hole gauges. I made three step sizes, 1mm, 2mm, and 3mm. The peg diameters go from M2-M14 (M2, M2.5, M3, M4, M5, M6, M7, M8, M10, M12, M14), and have a 4x step base. These are great for putting…

Hinged handcuffs, print in place.

Print this model first, to check if hinges are not fused. If hinges fuse - try reducing extrusion multiplier. Model fits on 210x210 build plate. I used PETG for it, but I think PLA is fine too. For printing place supports like this. Do…

Creality CFS Slim Carboard Spool Adapters w/ Desiccant Holder and RFID Tag plate

I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…