2794 modeli
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stargate Puzzle This is an easy to print basic Stargate Themed puzzle. The parts concist of the main stargate frame (that can be printed in 3 colors if you prefer) and 23 pieces that fit within the frame. I printed my frame in Inland…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena jednego wariantu
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Shinto Torii Gate. Zen and Shinto are both religions with a long history and significant influence in Japan. Shinto is a system of nature worship with prehistoric roots in that country, and its traditions are interwoven with Japanese life…
Wydruk około 13,55 €–16,56 € nettoWstępna wycena jednego wariantu
Hier ein Hindernis und zusätzliche Zaunteile für Spiele mit Schleich Modell Pferden. Hinweis: Ich habe mittlerweile etliche der Gatterteile gedruckt. Bei Verwendung von PLA brechen die Verbinder viel schneller als wenn PETG verwendet…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my model of the Stargate in the SGC pedestal. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths while the pedestal…
Wydruk około 0,27 €–0,34 € nettoWstępna wycena jednego wariantu
Stargate Dice Tower! Please leave comments and any recommendations. The base pieces and stargate pieces will need to be glued together. The Stargate should rest on top of the base, and it will sort of lock in place. The Stargate and Base…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
Just a simple Stargate Ornament - just in time to trim a tree Print instructions Easy print using PLA! I designed this with a little play between the Stargate "stem" and the Staircase Unit - you can either glue it in place, or slide in a…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Badge de l'expédition Atlantis de la série Stargate Atlantis, fixer 2 petits aimant 6*2 et il ira parfaitement sur votre réfrigérateur ou autre ;) Possible aussi de l'adapter pour le fixer autrement. Pour un meilleur rendu faire un…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Einfacher Sperrschieber für 2" bzw. 50mm HT Rohre. Bei den bisher gefundenen Sperrschiebern sammelt sich immer wieder Staub im Verschluss, sodass dieser sich nicht mehr ganz schließen lässt. Dieser Schieber ist durchgehend und schiebt…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Display stand for souvenir pressed pennies (elongated coins). Will hold up to 24 coins in total. From left to right the display is designed to hold alternating horizontal / vertical coins (see photo for an example). Printed with 3 walls…
Wydruk około 11,97 €–14,63 € nettoWstępna wycena jednego wariantu
This is my own design. It is heavily inspired by the High Republic Longbeam , with elements from sailing frigates (i.e. fore-, main- and mizzenmast, cannons, bowsprit). I imagine this ship to be about twice as long as a Longbeam. Assuming…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
I was missing some of the Garage slats , so i reconstructed them. Please note, they are not compatible with the original ones, So you must allways use the original OR mine, you cannot mix them. Print as many as you wish. You need to print…
Wydruk około 6,88 €–8,41 € nettoWstępna wycena jednego wariantu
I looked around for a 40mm blastgate design to use in a dust extraction system. I found a couple but all of them were pretty big and stuck out from the pipe a fair distance, they also required alot of hardware to make them work. I made…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wargame Ships - Frigate Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 20-24 -gun Frigate Circa 1812 Not to any particular scale. About 40 mm form…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Seagate External Hard Drive storage container. also has a spot for storing the USB cable. There is a hole in the back of the unit to access the port while keeping the drive in place.
Wydruk około 8,95 €–10,93 € nettoWstępna wycena jednego wariantu
Instead of a base with stairs, I decided to remove the stairs using TinkerCad to make stand compact. I used a 5% gyroid infill to save filament and print time. The base is still strong and does not tip over from the weight of the echo…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Replacement hinge joint for the Hauck Stop N Safe Safety Gate. As the original (and in my case broken) hinge joint has an obvious design flaw (cf. "planned obsolescence), I took the liberty of designing this reinforced version. Happy…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is just a simple add-on for my Stargate 23 piece puzzle. You can find the puzzle here: https://www.prusaprinters.org/prints/59797-stargate-puzzle After you solve the puzzle, you can display it in this base. No supports are needed, I…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
This is a Jig to help you fix the FlexGate issue on Macbook Pro version 2016 and 2017. The new cable will be 4mm longer and there is a line to help with the cut at the right lenght. It is highly inspired from…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
While in the process of creating my Stargate Game, I created these special dice - No MMU needed, and no supports. These dice are printed in two parts - first, a solid square block is printed in whatever color you choose (I used Inland…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
This frigate was the flagship of Slivo's pirates in Star Wars: Skeleton Crew. It is a lot bigger than most other pirate ships (like Gorian Shard's Cumulus-Class Corsair ) and features a large hangar, several boarding drills as well as 36…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Stargate Puzzle This has many similarities to my previous Stargate Puzzle - but this is completely NEW! The frame has been made larger to accomodate more pieces (and more detail). The puzzle includes 50 pieces. I designed it to be tough -…
Wydruk około 5,21 €–6,36 € nettoWstępna wycena jednego wariantu
FR: Pour les model de télécommande NICE : ON2E, ON4E, FLO2RE et FLO4RE Bon alors oui, les boutons des télécommandes NICE à fleur, c'est beau mais… c'est chiant dans les poches, sac ou sacoche car les clés et autres objets, appuie sur les…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist ein Sperrschieber für die Absauganlage für Rohre in der Größe DN50 (2") Er ist leicht zu montieren mit nur 4 Schrauben und Muttern der Größe M5 . Die Schrauben müssen mindestens 15mm (0.6") lang sein! Er lässt sich mit dem Winkel…
Wydruk około 5,55 €–6,78 € nettoWstępna wycena jednego wariantu
Gothic Tracery / Gate Decoration. Test with cube. Could make it into dice or something. Im just leaving this hear so I remember to come back to it. Feel free to print if you like.
Wydruk około 9,18 €–11,22 € nettoWstępna wycena jednego wariantu
lego castle gate v2
Wydruk około 9,93 €–12,14 € nettoWstępna wycena jednego wariantu
logo of project edens gate will joseph seed lead you the path
Wydruk około 9,20 €–11,25 € nettoWstępna wycena jednego wariantu
When you have ladders/plywood/pipes/whatever hanging out your tailgate and it won't close, it beeps all the way home, and that's annoying! Insert this into your tailgate, the locking mechanism will grab it, and then it will shut up.…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can be used to connect a blast gate to a DN110 system. You should use an original gasket of the KG pipes. Groove is provided accordingly. The remaining parts still need to be downloaded from the creator here . You need a 8xM6 screws and…
Wydruk około 10,20 €–12,47 € nettoWstępna wycena jednego wariantu
Blast Gate / Sperrschieber 2.0 für 50mm HT Rohre
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use this for my dust collection system. I have used one for several month and found it works great. Four ¼ bolts needed, I used hot glue for lock tight on hinge bolt and to seal the pipes. Hot glue can be removed with alcohol. New slide…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
This model is the stargate logo
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
A nice souvenir of Brazillian Navy. I took the ship from ELRAZ and made some changes, like addition of the bulbous bow, the color layer and also created a personalized base.
Wydruk około 3,99 €–4,88 € nettoWstępna wycena jednego wariantu
While this looks a lot like the first one - this one is twice as hard… On my original puzzle, the pieces had essentialy two possible orientations for each piece. of course with no easily identifiable design (the top looks all alike). At…
Wydruk około 5,05 €–6,18 € nettoWstępna wycena jednego wariantu
This is an easy multi-color print (no MMU) This is a New version of my Stargate Ornament - This is the Space Gate version, without the stem or staircase. The included pre-sliced file has a color change in the last few minutes for the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
my take on the iconic Paris Class heavy Frigate of the Halo universe, notably shown in Halo: Reach, and later in the series occasionally. please do not edit the G-code unless resizing for a printer smaller or larger than the Ender 3 Pro.
Wydruk około 6,49 €–7,93 € nettoWstępna wycena jednego wariantu
This is the wall cup / door frame socket / anchor (they seem to go by different names) that the child / pet gate slots into. We purchased a Northstates Toddleroo Supergate Explorer which comes with 4 wall cups and 4 self adhesive pads to…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Disclaimer: This is a use at your own risk type thing, only you can determine what is safe for your child or pet. Backstory: I was dismayed at the available options for baby gates for spiral staircases. I spent many hours searching the…
Wydruk około 10,73 €–13,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Under desk drawer for Seagate Expansion USB 2.0 with locking. Material: PETG, ABS, ASA etc. Layer high: 0,3 or lower Supports are needed.
Wydruk około 9,80 €–11,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Roof/Railing Patch -Repair _____________________________________________________________________________________________ This Customizable patch can repair your broken corrugated roof or railing. You can set your own dimensions with FCStd…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created model in blender for my broken gear wheel. I'm printed 3 times - always working print. I used print for my automatic gate. My printing takes a few minutes. I insert my *.gcode file too for my printer 3D: Artillery Hornet. I…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
We have multiple of Safety 1st automatically closing ports and all broke eventually. Part that breaks first is the lever that prevents pressing the button to bottom and opening the port. After finishing my design, I noticed the existing…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After creating my Stargate Stratego-style game, I decided I needed a box to put it in. You can find the game here: https://www.prusaprinters.org/prints/49637-stargate-stratego-gate-streeg-o This is a box that will fit all the pieces (even…
Wydruk około 8,64 €–10,57 € nettoWstępna wycena jednego wariantu
I designed and made these to enable easy connection of corrugated plastic sheets, in this case used for my father-in-law's greenhouse walls. Probably better made of ASA Prusament to withstand outdoor conditions.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small square 35MM film gate consisting of 4 parts. The main film gate where the film slots in, the top connecting piece, and 2 printed 1mm standoffs. right now, the top half of the film gate just gets taped after the fact to the gate…
Wydruk około 8,57 €–10,47 € nettoWstępna wycena jednego wariantu
I needed it so i made it :) Nothing special.. 100% infill PLA
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
These are Lego-compatible doors, optionally decorated with a pirate skull. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cap from the gate post around the pool disappeared. This is a quick fix until a more intricate one can be designed. I wanted this to be as quick as possible so I changed all the speeds to at least 70mm/s. Thoughts?
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
When I 3D printed stargate coasters (still working on color and details), I wanted a perfect coaster holder for them. Since I couldnt find any, I made my own.. I remixed two different models into one, and here is the result. I hope youre…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Width: 170 mm Height: 30 mm
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This is a 10" mini rack mount with optional retention features. You can use the keyholes on the bottom of the device with M3 button cap screws, or the retention clip with a M2x8 button cap screw and M2 square nut, or both. Possible future…
Wydruk około 4,56 €–5,58 € nettoWstępna wycena jednego wariantu
Needed a way to mount my portable hard disk on the wall. Din rails are pretty ubiquitous, so I decided to use that. Put the two pieces together with a 3mm screw or super glue. It is a pretty tight friction fit so it will stay in the box.…
Wydruk około 5,15 €–6,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple spacer to shorten the thread length on the stair gate and add extra stability. Two disk sizes, both overall length of 45mm. I have added step files and the original file can be found at Onshape . it has a free account to alter to…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Since we moved to our house, we've gone through two brand new vinyl fences (each set costing $700-800) due to cold Midwest winds and frequent use. I absolutely hated the idea of buying another vinyl fence, since they are so poorly…
Wydruk około 10,57 €–12,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die Wände sind mit 1mm dünn, die Bohrlöcher sind für die auf dem Foto dargestellten Spax entwickelt. Nicht zu fest randonnern, bei mir ist die Rückwand ein wenig gesplittert. PLA-NX1 von Extruder wurde hier benutzt. Hab den vorbereitete…
Wydruk około 5,84 €–7,13 € nettoWstępna wycena jednego wariantu
Republic frigate decorative model display
Wydruk około 5,65 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing A compact blastgate designed for DN50 HT pipes. It integrates multiple features to optimize dust collection systems. The gate includes a dedicated mount for a 12V microswitch that can be triggered automatically when opening or…
Wydruk około 4,52 €–5,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I connected several external hard drives - Seagate Basic 2.5" portable drives - to my Raspberry Pi so it so I can use it as a NAS storage. This part will hold 4 drives. I printed it in PETG - the previous version printed in PLA started to…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed these to allow me to clip corrugated plastic panels (3mm thick) to my kid's CrazyForts kit. I recommend printing these out of PETG, due to it's high ductility and impact resistance.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Seagate couldn't choose a worse USB connector for their drives (USB 3.0 Standard-B would be perfect, but it would cost them some cents more). It's already very flimsy out of the box…now imagine how it is after some plug/unplug and falling…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
I fixed the part with small wood screws.
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The covers from my old Moovo XW4/XW5 Automatic Gate Arms became brittle so I needed new parts. But because it seems that this models are discontinued, I can not found any new parts for repairs. So I design the cover and replaced the old…
Wydruk około 2,92 €–3,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This may or may not work for your stairs, it's pretty particular to my staircase. Try out the test fit print first to save your time and filament. Here is a link to the onshape document where you can edit the diameters and spaces in…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
The door lock stopper of our garden gate was broken so I designed a new one
Wydruk około 2,93 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a sign that slips over the top of a gate valve knob to remind users to no turn the valve. No supports are needed. The design was made with FreeCAD and is fully parametric. The model provided has a height of 60mm, fits a knob with…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals) S okénkem pro popisek
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This model was made to hold a couple of cables for the gate end stop switch and prevent them from rubbing onto the arm and coming loose. The model features 2 holes to use zip ties to hold the cables firmly and can be mounted with two…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
Print 1:1 - PLA - module with designed interface of our other module (pin and hole) so keep the ration as indicated to fit into other modules or change ration to all of them equally. (More models on our Tinkercad, gradually we will upload…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Visière permettant de protéger l'écran du soleil, dessiner pour le TOM TOM 25 mais peu marcher pour d'autre GPS. Imprimer de préférence en TPU clair, le PLA et le PETG n'ont pas résister aux température interne de la voiture en été,…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…
This is my project Destiny where i designed the Destiny from the SGU with attachable Seedship and a stand. The model is a kit and fits together without any glue whatsoever. For easier assembly, please take a look at the video series about…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
*** UPDATE *** My new DHD model is now available to go with your Stargate model- On Printables !! Download it FREE. *** UPDATE *** Crafted specifically for 3D printing, my fan-designed Stargate SG-1 model brings the iconic sci-fi portal…
This is my Stargate intended to be mounted on a wall. The gate is 80cm in diameter and it comes with separable Iris. The inner ring rotates and it has a preparation for eventual lihting. It is a kit and theoretically does not require any…
This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates. Here you can see a video about the project includin an…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
This is my model of F-302 from Stargate franchize. Once again, the model is designed entirely by me and is meant to be assembled with no glue at all. (Thou in my cas I had to use a little bit of glue to fix a gap that appeared). The…
This is my model of the Stargate in the off-world pedestal with DHD. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths…
🇩🇪 Willkommen in Deutschland! Welcome to Germany! The Brandenburg Gate ( Brandenburger Tor in German) is an 18th-century neoclassical monument in Berlin, built on the orders of Prussian king Frederick William II. Throughout its existence,…
English These couplings or connectors are used to join two corrugated pipe sections that are used in electrical installations. Model files are available for the common pipe sizes DN20, DN25 and DN32. I experimented a little and created…
This is a model of a Stargate that includes a working Iris. It comes with a pedestal based on the Tauri ramp in SGC. The Iris can be open and closed. For easy assembly, please watch the following video:
This is my 3D printed Chess with a Stargate theme so we have here Tauri and Goauld. Figures are labeled so that you know which figure is which and you can basically use any model you want as those are separate. In the future, I will…
This is a little dog that you can screw onto your toothpaste. When you squeeze the toothpaste he poops it out his butt. Print it on its side so the threaded portion stays round.
This is a test of my own working Iris from stargate. At first I did not even consider to publish it, but after i published a video about it, i saw that there is a demand so here it is. The iris works, It fully closes and retracts. For the…
This is a 3D printed model of a Orion Class Heavy Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Deimos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with torpedos -…
This is my project Teltak. Here I designed a Teltak or a Goauld cargo ship from Star Gate. The project comes in 2 versions. Static and Retractable. Static is - as the name suggests - model that is composed of three parts and is completely…
Here's the 3-way blast gate I use in my shop, powering my portable tools, router table and table saw. It's hooked to a Festool dust extractor and connects to the tools using various Festool hoses, since most (all?) Festool connectors are…
My takes on the Characters, NPCs and Creatures of Baldur's Gate - Descent into Avernus are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of…
This is my own design for the coaster. It is in the shape of Stargate with Iris. It is little bigger but that is because I prefer “Tuplák” - 1 liter glass of beer and it fits to this coaster really nicely. The Iris has holes in it to lead…
This is my model of BC-304 from Stargate. I named it Ares. It is roughly 60cm long and arround 3 kilo. This is very complex model kit consisting of hundereds parts. I printed and assembled it over a month. The assembly may be kinda hard…
This is another of my Star Gate project. The Arora is 60 cm long and it has retractable third leg so that it can stand on its own without any stand. All fits togeher via pegs and holes. No need for a glue. Check this playlist for the info…
This is my model of the Ancient Cruiser from the Stargate Atlantis. The ship appeared only briefly in the episode Progeny. It is a kit, no glue required. The assembly is very easy but iI recommend to look at the assembly video just to be…
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
Model from Halo for the UNSC Heavy Frigate ship. Comes with original model, with a pre-split files for a 400mm model.
