Wyniki wyszukiwania: gda

Bioshock Bigdaddy (Bouncer)

One part, sculpted from scratch. Suupport intensive. Category: Sculptures

Aircap Fengda and Harder & Steenbeck airbrush

Tip dry can occur during airbrushing with acrylic paint, causing the airbrush to splash. By using this air cap, the needle can be wiped clean with a cotton swab. The air cap can be used on a Fengda airbrush as well as a Harder and…

Amygdala (Bloodborne Fan Art)

This is a big, big boy. When I modeled The One Reborn, I was taken by surprise that I would need a gargantuan base of 8 inches in diameter to truly capture the scale of that creature. When I made the Amygdala however, I KNEW I would need…

Dogday puppy playtime

My children asked me to draw and print "Dogday puppy playtime" for them. It's a stupid cartoon, but I love my kids too much, so I tried))

DogDay

из игры Poppy Playtime

Magdaline

Magdaline Cybernetic Experiment.

Mingda Magician Series 2 Piece Extruder Cover

This is a 2 piece cover for the Mingda Magician Series printers. It is basically the same size and shape of the original 1 piece cover, however split into 2 pieces - A fixed side held on with the original hardware, and a removeable side…

Mingda Magician Pro/X 3kg Spool Holder

Here is a pair of 3d printed uprights to hold more 1kg spools OR a 3kg spool. It is designed to use a 1 1/8" or 28mm wooden dowel. Two uprights are required, just download the single model and mirror it for the second. Thank you to those…

Mingda Magician X Filament Holder Riser

I wanted to be able to have a filament spool holder with ball bearings for my new Mingda Magician X vs the stock holder. I took the two holders and merged them using Tinkercad to be able to have a base holder from Tueftler-Maker and top…

Geodesic Dome Connector - Bogdan style

Inspired by Bogdan Isopescu's clever solution https://www.kickstarter.com/projects/25645348/geo-the-geodesic-dome-connector I'm experimenting with printing the bottom part of the piece with flexible filament (TPU) and then print the upper…

Saint Mary Magdaline

I decided to turn this unknown women saint into Saint Mary Magdaline. Generally, statues of saints hold or wear symbolic items that help represent those saints. In the case of this model the right hand was missing. It was probably holding…

Knob - Mingda Magician Series

Mingda Magician Series - Extruder Tensioning Screw … Original - hate/hate relationship. Screw too short , head diameter too small - makes installing with filament already loaded nearly impossible (for me) to screw in. Added retainer…

Airbrush holder for Fengda

Remixed version, because this airbrush has a ‘belly’ that didn't fit nicely.

Sample Square - PETG for PrusaSlicer on Mingda Magician Series printer

Just a simple square to share generic PETG settings for PrusaSlicer on Mingda Magician Series

Imaginal Disk CD Case (Magdalena Bay)

Feeling DiskInserted? ~Based on the artwork by Zhecon for Magdalena Bay's album Imaginal Disk ~ This model consists is two halves, a nearly symmetrical top and bottom, which "twist lock" together allowing for a CD to be held between them.…

Kingda Ka Top Hat

Fengda Airbrush Compressor tool

print at 100% infil

Sample files - PETG for PrusaSlicer on Mingda Magician Series printer

EDIT 9/9/23: Added MAX PETG MMMAX_30_SUNFIRE_GUIDE_SUPPORT - this 3mf project file was sliced with PrusaSlicer 2.61 - PETG, Magician Max - Config Bundle -> https://www.facebook.com/groups/mingda3dprinter/permalink/1850190608709882 EDIT…

IKEA VIGDA Wall mount

Simple Wallmount for IKEA VIGDA Curtain Rail Einfache Wandmontage für IKEA VIGDA Vorhangschiene. Print with no Supports ohne Supports gedruckt

REMIX - Labyrinth on Magda j's cat toy playing plattform

Using Magda j's empty puzzle platform, I created a labyrinth for my cat's food. She loves it and struggles quite a lot to eat from it, as it's juuust the right size for her not to be able to grab food inside of it with her mouth… She uses…

IKEA Vigda - single rail solid joint

Joint for Vigda single tracks with expansion screws for correcting dimensional printing errors. This connection joint compared to the IKEA original prevents bending and separation of the tracks as well as offering greater resistance to…

Mingda Magician X Spool Holder Remix for smaller spools

This is a remix of Mingda Magician X Filament Holder Riser and it only contains two components instead of three as the original. It is made for extra small spools with a center hole where the diameter is 20 mm. So I modified the…

Mingda Magician X Bed Cable Support Drag Chain

Start by putting the bed support on first and clip in past the heat bed support legs. Then install top support clip by sliding on from cable towards the bed. You can then secure with a zip tie. Print at least one of the Open Cable Chain…

Mingda Rock 3 Pro - BL touch mount

I am working on upgrading my Mingda Rock 3 Pro printer, and I wanted to have a BLtouch setup. Mingda has the holes setup and ready to install the bracket for the BLtouch, but I could not find a proper bracket anywhere so I created this…

Fanmount 4010 for Mingda Magician X

if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, ABS, GreenTec, GreenTec Pro or similar). New Version 2024-04-07:…

Travel Mandolele / Bouzoukulele / GDAE Travelele

This is a Travelele purpose-built to be tuned in GDAE or GDAD. I'm an Irish Bouzouki player and wanted something I could take on work trips to practice. The Travelele was ideal: quiet, portable. But it wasn't set up to be tuned in GDAD,…

Mingda Magician X and X2 filament guide

Print in place with a tiny amount of organic supports needed. Uses a small amount of PTFE tubing in the swivel ball. Use a blade to taper one end of the tube to make it easier to install.

Mingda Magician series Fan Shroud Duct (single 4020T fan)

Fan shroud is suitable for Mingda Magician series extruder. Shroud should be printed at least from PETG material, despite being close to the hot-end PETG works fine, does not deform. Uses a single 4020 Turbo fan. Fan is secured with a…

poppy playtime dogday (vybarvený v bambu studiu)

je to dogday z poppy playtime 4

Mingda Magician X & Max (not Pro). SD Card Mount - Modular Quick Change accessories - The possibilities are endless

Mingda Magician X & Max (not Pro). SD Card Mount - Modular Quick Change accessories - The possibilities are endless https://imgur.com/a/k6bGzOF

Mingda Magician X LED top mount

Mingda Magician X LED top mount v11 https://imgur.com/a/TNXw41H https://www.facebook.com/groups/mingda3dprinter/posts/1537134786682134

Fengda FD18-2 Air Brush Compressor Cooling Mod

2x 60mm Fan for 110-220V AC (20mm thick) 2x M12x1.5 cable strain relief cable with 2 strands to connect cylinder head fan 4x M4x30 with hex socket to replace cyclinder head screws 8x M4x25 to mount fans 8x M4x10 for mounting motor fan…

dogday Sun

dogday sun necklace charm

MustangDave's Gremlin Model Base/Stand

I printed the Gremlin model from MustangDave as a gift for someone ( http://www.thingiverse.com/thing:702341 ). Sadly the model does not stand on it's own because of the big ears. I made a little stand to glue the model onto, it's also…

Mingda Magician screen cover

Screen cover for Mingda Magician printers

Large Knob - Tensioner Screw - Mingda Magician Series

Mingda Magician Series - Extruder Tensioning Screw ‘Knob’ … This is a larger knob/handle of my original design . V1 - Print this part and screw in a m3 x 30mm socket head cap screw into a recessed m3 hex nut (it may end up spinning, but…

Mingda Magician X2 LED light mount and cable clips

These may interfere with the bulky stepper motor housing and ribbon cable if printing very tall objects. You can remix these any way you see fit just shout me out. Use organic supports for the small overhangs and at least 25% infill for…

Mary Magdaline Netsuke

Mary Magdaline (Netsuke Form) Holding Alibaster Jar.

Mingda D2 BIQU H2 Mount

Mingda D2 BIQU H2 Mount with 4020 hotend cooling fan

RagDad-Prinatble Ragdoll Remix

This is Linkeys dad new to the ragdoll family new to having a job and he does not need support

Runde Eckverbindung für Vorhangschiene von IKEA Vigda / Round corner joint for curtain rail from IKEA Vigda

Vor der Montage unbedingt die Abmessung mit den Eckverbindungen vornehmen! Kein Support notwendig, die offene Seite sollte beim Drucken oben liegen. Eventuell eine verstärkte Füllung nehmen.

Silicone Sock mold - Mingda D2 Hotend

This is a Mold for the Mingda D2 hotend Silicone socks. With this mold I tried a new approach compared to my previous mold designs. Usually the biggest issue was to get rid of the air bubbles in the closed mold designs. Therefore this…

Mingda Rock SKR3 Mount

Mingda Rock SKR3 Mount Original screws can be reused. For the controller fan you need 2 x 12mm m3 screws 2 x m3 nuts

SD Card Mount with added Camera Mount (Mingda Magician X)

I was looking at mounting a webcam in the sd card slots that the original design used, but liked the idea of being able to mount a case of some sort. So I extended the original base to add the camera mount, while still keeping the mount…

Mingda Magician Pro Raspberry Camera Mount

Simple camera mount for the Raspberry Pi Camera used along with OctoPrint. The bed stops before reaching the z-axis frame, so it doesn't get knocked.

Case for Fengda airbrush accessories

a box for some accessories for fengda airbrush i put inside some cleaning tool and needle. no support required. magnet 5x2 mm.

Jungling Vom Magdalensberg Classical Statue 3D Printable

Bring the timeless beauty of classical antiquity to your space with this stunning 3D printable statue that captures the grace and power of ancient Roman artistry. This meticulously detailed STL model showcases a perfectly proportioned…

TP-Link Tapo C200 Halter für Mingda Magician X

Es wird 2x der SD dummy und einmal die Grundplatte benötigt. Einfach die SD dummys in die Grundplattte kleben und dann in die SD Halterung am Magician X stecken, fertig!

Mingda Magician X Light Bar Holder

This is a light bar holder for an LED lamp I bought at Aliexpress. Link: https://a.aliexpress.com/_mKfLvn8 Printed on PLA. Used Fuzzy skin because I like it. No Supports, oriented so it doesn't need it.

Mingda Magician Series 1 & 2 Complete Cooling Unit - 5015 Fan Conversion

It's time to upgrade your MINGDA Magician Series printer with the Ultimate Cooling Kit. I've been using this setup for more than a year now. Combined with the All Metal Heatbreak and V6 PT100 Alloy Block, this setup is a beast—I've…

Lithophane Poster affiche Bioshock - BigDaddy & Rosie

Lithophane d'un artwork de Bioshock - BigDaddy & Rosie ! Faites vous plaisir ! This is a lithophane from an artwork about Bioshock - BigDaddy & Rosie. Enjoy ! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…

Mingda D2 X Carriage

This is just a simplified version of the X carriage (without the belt holders) intended for measurements and references only

Fengda FE-130 Needle chuck fix

If you broke the needle chuck on your Fengda FE-130 airbrush you can fix it with this easy print. Parts can be ordered but with shiping its more expensive than a complete airbrush. I cut the brass part and superglued this print onto that.…

Mingda Magician X nozzle holder for sd Slot

I used PETG, but will work fine with PLA. I used 4 lines with 0.4 nozzle on the walls.

MV Langdale Queen (BCFerries, RARE!)

This is a rare BCFerries vessel, like no other, somewhat unusual…

Amygdala Indicator Necklace

The Amygdala indicator is based on the child psychology theories described in the book "Hjernesmart pedagogik" ISBN: 978-87-7160-177-0 It enables children to self reflect on there mood and state of mind and indicate that to his or her…

Mingda Magician - Snap on Coupler for magnetic PFTE-Joiner

PFTE-Tube-Coupler that snaps on the runoutsensor of Mingda Magician series. When running with the originals Hotendhousing it is eventually necessary to cut out the opening. In my case i dont need it, because im not using the housing.…

minimal mingda

mingda magician print head shroud with all the excess bits removed for easier access to the crappy inside parts. this should still work for X, pro, or max. but not the x2, pro2, or max2. They stopped making non-industrial printers so if…

Magdalena Frida Carmen Kahlo – Bust

Magdalena Frida Carmen Kahlo – Buste Description et contexte (FR) Ce buste représente Magdalena Frida Carmen Kahlo, artiste majeure du XXᵉ siècle et figure emblématique de l’art mexicain. La sculpture est inspirée de la photographie la…

Mingda D2 - supporto mosfet - mosfet support

Supporto interno per stampante Mingda D2 la staffa ospita due mosfet >…

Mingda Magician Hot End Bracket

Mounting bracket for the hotend on a Mingda Magician hotend. Best printed in higher temp filaments or Resin.

Mingda Rock 3 Pro Spool Holder

I was struggling while printing with TPU. The extruder was really pulling and stretching the filament. I needed less friction from the spool holder mount. I was already using one on a different printer and I liked how it worked. I remixed…

Babystep Endoscope tool ONLY FOR !!! MINGDA Magician X2

Babystep Endoscope tool ONLY FOR !!! MINGDA Magician X2 endoscope diameter 7mm Only 2g filament :) need m3 screw! Holder need to be clamp in correct ventilation holes !!! Picture is just sample! Use moving arm to fix distance!

Mingda Magician X: X-axis Ribbon Cable Strain Relief Bracket

I've had two instances where the 20-pin cable responsible for the x-axis gantry stuff fail on me, so I made this easy to print clip-on strain relief bracket. The short ended clip should be inserted at the top, and the bracket should be…

Lightholder Mingda Magician - 2 mounts

a stiffer version with 2 mounts from my lightholder https://www.printables.com/de/model/907128-lightholder-mingda-magician. Print upside down with supports, eventually use birm. alignment on the heatbead rotated 45 degrees so that it fits…

Straight plug for IKEA VAGDAL

Straight plug for IKEA VAGDAL connection cable. Please remember that only professionals are allowed to carry out electrical work. I don't answer any questions about this. also see https://www.thingiverse.com/thing:6532571…

mingda x voron

Experimental adapter for attaching a voron style hot end to my mingda printers. While it will work, this was just a proof of concept and the part will melt within 15 minutes. I repeat don't use this unless you get the part machined from…

PERNILLE HARDER & MAGDALENA ERIKSSON KISS SILHOUETTE

Silhouette of the kiss between Pernille Harder and Magdalena Eriksson at the quarter-finals of the FIFA Women's World Cup France 2019. To see more: https://www.instagram.com/p/CJy_zvEr8ce/ Print Settings Printer Brand: Creality Printer:…

Fanmount 4020 for Mingda Magician X

if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, PCTG, ABS, GreenTec, GreenTec Pro or similar). New Version for…

DEPOSITOS PARA AERGRAFO FENGDA BD 184 (O SIMILARES)

Sustituto para deposito de aerografo.

wyze cam mingda mag X sdcard slot mount

quick one off to mount a wyze cam on a magician X, you can either use a dead sdcard, an extra card adapter, or the included blank. screw or glue. Category: 3D Printer Accessories

Cheomseongdae Observatory Lamp, 첨성대 램프

Design Concept: The Cheomseongdae Observatory Lamp is inspired by the historic astronomical observatory in South Korea, famous for its stacked brick pattern and conical form. This 3D model reproduces that distinctive design and transforms…

mingda goldfish build plate holder

mine broke into several pieces. mingda had no replacement for it....made my own been working longer than the original. i made out of PLA Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .15mm Infill: 50% Filament: generic…

Wall for drawers from Norema and Sigdal

Compatible with brands like Norema and Sigdal, these drawer walls are designed for effortless installation. They snap securely into place and remain firmly attached during use. They slides easily in to positioning. Can be removed without…

3M Command Strip Brackets for IKEA FÖNSTERBLAD, LÅNGDANS, SANDVEDEL Roller Blinds

Requires: 2 pairs of 3M Command Picture Hanging Strips (from Costco)

Bahnsteigdach zusammensteckbar für besseren Druck

Angepasstes Design des Bahnsteigdaches um es leichter und schneller drucken zu können.

The Ultimate PUGDAPUS

pug octopus

MINGDA Rock 3 PRO - Filament Trashcan

Here you will find a practical filament trashcan for your MINGDA Rock 3 Pro printer. It attaches to the printer with two clips that prevent it from coming into contact with the print bed during printing. Small tabs on the clips prevent…

TGIFrogday

Fly Frogs are a line of printable, collectible, modular figures. Designed for FDM printing on single and multicolor printers. Works with other designs as one modular system with interchangeable parts. Includes 3mf, STL, and instructions.…

Mingda Magician X: X-axis Ribbon Cable Strain Relief Bracket

I've had two instances where the 20-pin cable responsible for the x-axis gantry stuff fail on me, so I made this easy to print clip-on strain relief bracket. The short ended clip should be inserted at the top, and the bracket should be…

Falowiec Gdańsk Poland 3d model 1:2000

case study model i made as an architecture student

Magdalena Frida Carmen Kahlo – Bust

Magdalena Frida Carmen Kahlo – Buste Description et contexte (FR) Ce buste représente Magdalena Frida Carmen Kahlo, artiste majeure du XXᵉ siècle et figure emblématique de l’art mexicain. La sculpture est inspirée de la photographie la…

Travel Mandolele / Bouzoukulele / GDAE Travelele

This is a Travelele purpose-built to be tuned in GDAE or GDAD. I'm an Irish Bouzouki player and wanted something I could take on work trips to practice. The Travelele was ideal: quiet, portable. But it wasn't set up to be tuned in GDAD,…

The Ultimate PUGDAPUS

pug octopus

Żuraw w Gdańsku

Żuraw w Gdańsku Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )

poppy playtime dogday (vybarvený v bambu studiu)

je to dogday z poppy playtime 4

Fanmount 4010 for Mingda Magician X

if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, ABS, GreenTec, GreenTec Pro or similar). New Version 2024-04-07:…

GDA Smart Hand Controller

This design is for the corded hand controller that i include with my CGE Pro kit. It uses the 1.3" OLED and the PCB that i made. I use PETG filament.

TGIFrogday

Fly Frogs are a line of printable, collectible, modular figures. Designed for FDM printing on single and multicolor printers. Works with other designs as one modular system with interchangeable parts. Includes 3mf, STL, and instructions.…

Magdalenka topper

Magdalenka topper.

Kostel sv. Máří Magdaleny v Krásné Lípě

stl soubor určený k tisku. Model je původní, není úpravou jiného modelu.

IKEA Vigda Curtain Rails Connector with Threaded Inserts

This is a connector for aligning Vigda rails so that you can easily slide curtains along the tracks. I used threaded inserts to make it easier to have a set bolt on each side. If your rails connect where there is also an overhead fastener…

IKEA roller blind bracket for FÖNSTERBLAD, LÅNGDANS , SANDVEDEL

Replacement brackets for these model of blinds.

Mingda D-2 Extruder 1/2 cover .Now with more Skull .

A 1/2 Extruder Cover . With more Skull . Print Settings Printer: Mingda D-2 Rafts: No **Supports:** Yes Resolution: 0.16 **Infill:** 25% Filament: Anything I can get my hand on cheap PLA Black Notes: I just put a 10mm support under the…

IKEA Vigda Track - Aqara Curtain Driver E1 (Track Version) adapter

Print 4 parts for one curtain driver. Use M3x8 screws to join two parts through a wheeled track. The screw should tap into the plastic. You might have to open the holes up a bit with the tip of a screwdriver. Put the assembled part on the…

Lechia Gdansk text

Lechia Gdansk

Qingdao, China - 3D Miniature

3D printable topographic miniature of Qingdao - 🇨🇳 China Capture the beauty of Qingdao 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 36.066, 120.381 (LatLng) .…

Seoul, Mapo (Hongdae), South Korea - 3D Miniature

3D printable topographic miniature of Seoul, Mapo (Hongdae) - 🇰🇷 South Korea Capture the beauty of Seoul, Mapo (Hongdae) 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…

Falowiec Gdańsk Poland 3d model 1:2000

case study model i made as an architecture student

Belgrade, Kalemegdan, Serbia - 3D Miniature

3D printable topographic miniature of Belgrade, Kalemegdan - 🇷🇸 Serbia Capture the beauty of Belgrade, Kalemegdan 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…