3452 modeli
New key features of CORE One+ Automatic grille opening adjusts the chamber ventilation based on the internal temperature. This ensures that the environment is optimal for the materials being printed, helping to reduce warping and improve…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable parts for the MK2/MK2S/MK2.5 to MK2.5S Upgrade. Note this is a legacy download. As MK2.5S is an upgrade for the older MK2, MK2S or MK2.5 printer, other parts not listed in this print are available as the MK2S parts:…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable parts for the MK2 / MK2S to MK2.5 upgrade. Note, these are the parts for the MK2.5 upgrade, not the newer MK2.5S upgrade.
Wydruk około 6,78 €–8,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These models were created using Fusion 360. These models Allow you to add extra tobacco and tubes with the Powermatic 5+ Powermatic machine will need to be opened up and modified so you can keep tobacco door open while using the machine.…
Wydruk około 15,42 €–18,85 € nettoWstępna wycena jednego wariantu
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
Wydruk około 7,55 €–9,23 € nettoWstępna wycena jednego wariantu
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
UPDATE!!!! Oct. 2020 I change the case a little bit and the upper and lower mount. If you print the old case and your mounts doesnt fit, you only print the mounts new. then it works. Sorry You need 2 x upper mount and 1 x lower mount.…
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there, I created a Paracord Jig Upgraded to everyone, who needs a jig for making paracord bracelets, etc. :-) I printed a great model of "old" Paracord Jig by FrankBer from Thingiverse and I using it for one year. I had two small…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of hand cramps and struggling to control your Singer Heavy Duty 4423 when tackling thick projects? This 3D printable handwheel upgrade is here to revolutionize your sewing experience! Problem: The original handwheel on the Singer…
Wydruk około 7,18 €–8,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand for PSA graded trading cards (TCG)
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Combined and designed this setup from the best ideas and designs I could find (in my humble opinion of course) Features: Single piece backplate. No loss in build volume. Nozzle in original position. Cable routing thru backplate for nice…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Custom-made upgrades for the components for the board game Anno 1800. I sprayed them with some metallic-like coatings to get a nicer sheen on them. For the gold ones tokens I included both an embossed and a debossed version, but I…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
Stock, the oculus quest does not fit me very well. If I pull the band low enough to keep it from slipping off, there is a huge gap at the bottom of the headset. This allows me to have a very good fit with no gaps and keeps the headset…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPGRADE!! Spool Holder Series : Anycubic (Chiron / Kossel / Mega-X) Easy install just clip on for more smooth rolling filament spool Enjoy!
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix from Martin_au https://www.prusaprinters.org/prints/1683/files A cable clip for the LCD cables for the Bear Mod upgrade. The Bear Mod sturdy frame upgrade for Prusa MK3S is a 2040 aluminum extrusion, so different sized LCD cable…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Landru's “Companion Cube Upgrade”, altered so that you can print it in its proper colors on any printer by just switching filaments. It's also scaled-up considerably - this version is 8 cm on a side. The sides and…
Wydruk około 6,63 €–8,11 € nettoWstępna wycena jednego wariantu
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Wydruk około 17,71 €–21,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is based on Lichtjaeger's awesome design. I wanted to make it a bit lighter and also use the Nut that comes with the revo to fasten it instead of the Prusa method. (Which I am not a big fan of) Insert the plastic Nut that comes with…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My cat toilet roll holder https://www.printables.com/model/1306353-toilet-paper-roll-cat-friendly-animal-klopapierrol I wanted to put my cat toilet roll holder next to Gromit. As the cat has a tail, I also added a tail for Gromit. The…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an Upgraded Cable Holder for the Prusa i3 MK3/s/+ with no Problems for the Selfttest, Autohome, Wizard and Large Prints. I printed it with das Filament PETG with no Problems. It is Important to use PETG or even more Temp resistant…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPGRADED in strength and wall holding power. Original design was too flimsy. Printed in PLA but PETG fine, 0.6 nozzle, 0.3 layer height, no supports needed. Assumes M4 Inserts but M3 Inserts will work also.
Wydruk około 6,17 €–7,54 € nettoWstępna wycena jednego wariantu
I've had these made for a while. but wasn't ready to share them. They are upgrades for BattleSlash/RoadTrap/BattleTrap. the double-barrel gun goes with RoadTrap and is based on the original gun from the G1 Duo-Con. the Gatling like gun…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
When I got my figure, I looked around for any 3d printed Upgrades I can do at home. the one I saw related to the sword was cool, they weren't 3d printed but was still cool. taking off the blades and making the handle a proper rifle is…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First roll which note with the dice (A-F) and then again with the matching dice to be more specific. Available in three sizes: 20, 30 and 40 mm. Have a look at my other decision dice:…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
I like the Prusa and the Bear-upgrade X-Axis design but the distance betweeen the linear shaft and the z-motor was to big. I decided to adapt the z-motor mount. Just print it replace the original z-motor-mount plate (i3-04 and i3-05) and…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount. https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2 Installation: if I already have version 2 printed and…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of having to change the puny coin cell battery so much? Well go big or go home! With this case and a tiny bit of soldering you can now wait much, much longer to swap batteries! Takes just over an hour to print. No supports. I just…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
These files will provide you the ability to print your own replacement parts and also add upgrades to TT/FFC too. These files work well with PETG. The complete Cabinet is available at…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Additional parts: Threaded inserts (M3x4mm) and 20mm spacer between Orbiter Extruder / Toolboard mount required. CAN-FD on Duet3D boards rulez ;) Printable in ABS. Use at your own risk. Please give me some feedback and post your make as a…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
I always liked the idea of the iOS settings icon on top of a stepper, but didn't wanted to cover my extruder stepper, because of the cooling of the motor bottom. Then I found the solution from Félix but it doesn't fit on the bear motor…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000425 : Planetary gear, 23 teeth, 0,85 modulus
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this drive shaft optimization. It is a hexagonal shape with an increased section. I had issues with TPU shaft. Indeed, the coupling was grinded in early 15 minutes of uses. I decided to change the print orientation. It works…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Sky Team upgrade package including box insets (upgrade bed adhesion) and upgraded switches. Based on: https://www.printables.com/model/805423-sky-team-insert-removable-tray https://www.thingiverse.com/thing:6268933
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car. I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
My filament rolls keep falling off my filament holder so I made an upgrade to fix it. Print with supports on. You stick it through the center of the fillament holder and put the knob on the side that connects to your printer for those to…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This door handle is an upgrade to the base handle for the delack enclosure. I wanted something larger that I could easily grab when opening/closing. This fits the same bold hole and fits the M5 nuts that come with the enclosure. I suggest…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000427 : Planetary flange
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The goal of this upgarde is to get the full print bed available, completely prevent collision and improve the thermal performance in the most foot print efficient way, to compeat with the materials capability of the Core One. I get easily…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgraded nut for angle grinder disc saver
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000426 : Planetary holder
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000430 : Planetary shaft (use 2)
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgrade for the original, standard houses and hotels of the Mickey Mouse 75th Anniversary Collector's Edition monopoly. Contains the reels and vaults that upgrade the property development tokens. I used a .4mm nozzle due to time and they…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
JDM SHIFTER FOR THRUSTMASTER TH8S Easy to Print Uses under 80g Of Filament Tested on the Thrustmaster TH8S Designed Without the help of AI Multicolor Printer Not Required Print settings are already Included in the .3MF, Make sure to Print…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…
All printable parts for your Original Prusa MMU2S Unit Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…
Added a donation button for the people who want to buy me a coffee. Prusa Mini LCD backcover Protects against dust and dirt and keeps your PCB save Fits exactly Use a 3mm - 25mm screw Nice upgrade Step files included Print instructions…
Thank you for downloading and liking the model! Your support means the model reached the 400 downloads in one month milestone ! 🏆 As a thank you, Version 2.1 adds a prop silencer attachment. New prop of the SCCY CPX-2 9mm handgun. This is…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…
The absolute best modification you can make on your Kobra 2 class printer. And it's FREE! Better cooling with true 360 coverage Quieter than stock Unobstructed nozzle visibility Fast (tooless) removal to fix clogs/replace nozzles Uses…
Discover the charm of our adorable Tardigrade figure, perfect for biology and microbe enthusiasts! 👩🔬🦠 This file includes an STL with a keychain hole and one without for your convenience. Best printed at 0.2 mm layer height, it's still…
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Hi guys, this is a remix of squinn's well designed Portable Cable Organizer / Winder, I thought there's a room to improve, specifically I improved the retraction of the cable where there is a foldable handle with which you can retract the…
This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes. This will prevent the belt to wear unevenly and increase its life spend. Recommended Print Settings : Material : ASA/ABS Nozzle : 0.4…
A kitbash of different Dummy 13 models to create Digitigrade/Furry legs! These are scaled at 150% as that's what I test printed them at, so, be forewarned when you go to print them. The remix also includes the lower leg from the K9, but…
**SPECIAL NOTE: I've installed this only on my printer, if your printer is different, let me know and I will see if I can find a way to help. Watch the video, if you're just looking for the install, skip to that part. Print from…
__________________________________________________________________________________________________________________ Collection of all my upgrades for Ender 3 V3 SE Heatblock fan mounts: Best airflow 4020 mount 4010 fan mount Smallest 4020…
Simple Graded Trading card display stands, supports 6x3mm magnets to help join multiple together on a shelf.
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
G1 Transformers Optimus Prime base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Printer mods: Tool holder Filament spool handle…
Advantages : Better support for the foot extension. Foot extension will never fall off again. You will never lose the foot screw. 2 versions : with or without the bottom panel Recommended Print Settings : Nozzle : 0.4 Layer height : 0.2…
Not recommended for beginners. also available on Makerworld https://makerworld.com/en/models/1636170-mmu-multi-material-upgrade-diy#profileId-1728491 The Pico MMU is an open-source project designed to enable multi-material 3D printing on…
Video guide: Text guide: https://e3d-online.dozuki.com/Guide/Convert+your+stock+Anet+A8+to+the+Hemera+toolhead/131#s1512 Get the ready-to-go firmware here: https://toms3d.org/wp-content/uploads/2019/11/Marlin2-source-A8-20191129.7z…
I really liked Johnny_Lawrence's design for a PSA stand, its minimal, quick printing, and looks nice but CGC slabs are a bit wider and I wanted a matching stand. I modeled this in Fusion 360 using Johnny_Lawrence's PSA stand as a…
Eliminate the sloppy fit between your filament spools and the spool holder that came with your Creality printer. This poor fit causes eccentric rolling of your spools while printing which can lead to non-uniform extrusion as the extruder…
I rotate 90 degrees, increased 1,5mm of the lock and made the hook that rests on the printer thicker, about 1.5mm (previously it was 1mm). In addition to these other changes, I placed the Letters K1 on the side of the spool holder PLA…
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
this is an upgrade of ''dummy13FANBOY'' version including a revised version of the frame and new upper and lower armor parts to fit an extra set of arms. I added flat spot on the second set of joint on the frame for easier printing and…
Relocate your runout sensor to the top of the tool head. Works for Kobra2 Max,Plus,Pro -No supports necessary JST connectors (no soldering or modifying necessary.) Just plug 3 in line to extend: https://a.co/d/bYScS67 Use with this handy…
Update: 6 june 2019. I've made a new version with even more clearance, and even more robust walls. It's visible in orange in the screen grabs (V1 in cyan, original in red). Keep in mind that this version is designed for use with socks,…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 New version of the Z-axis top with additional ball bearing for more stable guidance of the trapezoidal spindle. I don't know if you really need it…
I love the game Sky Team and played it a lot, but activating the cardboard switches did not feel very satisfying. My design features real switches with status LEDs and automated LEDs for the landing gear, landing flaps and brakes. All…
I made this tardigrade model for a local Researchers’ Night event. This lovely critter is the toughest animal on earth. With it's Cryptobiosis superpower, this little bear can withstand extreme temperatures, dehydration, hard vacuum and…
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Creality Ender 3 / Pro / V2 (?) --- I can only assume this could work for the V2... don't have one to test with. Part Cooling / Hotend…
Please give it a ❤ if you like it 🥰 Video : Please give it a ❤ if you like it 🥰
This one dimensions: 120 mm long. 0.15 mm layer heigh. 55 mm/s. Horizontal expansion -0.03 mm. Little support behind the "mouth" is recommended. Sure you can print even smaller ;) Category: Toys & Games
The remix is an assembly of all the furry parts found on the internet. I have created it to be a single-click print that the furry artists may send to their friends with printers. I am not an author of the models, just this handy assembly…
For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…
this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…
This mod is meant to make your life easier when you need to couple/decouple the PTFE tube. Bill of Material ECAS04 PTFE connector M3x20mm SHCS threading screw (one of the screws that were holding the bed for the shipping) M3x6 mm FHCS…
Moving the filament holder from the top position to the side will increase the stability of the printer while improving filament guidance to the extruder. As an addition to this filament holder on the side of the printer, I recommend…
