183 modeli
Vertical Featherboard for the fence of the Bosch GTS10XC. You'll need per set 1x Featherboard 1x Top Bracket 2x Slot Nut 4x Knob (Update 19.12.2022: Knobs designed a bit smaller to ensure better handling) 4xM6 Hex bolts 2x M6x20 for the…
This is a stand made for the Amazfit GTS 2 mini smartwatch. It print correctly on the side, without support, with 0.2mm layer height. The base of the stand is a bit too light, mine is double face taped on my desk. Made with onshape :…
Rechen für den seitlichen Anschlag der Bosch GTS 635-216. Es können hierbei Werkstücke bis zu einer Höhe von 50 mm verarbeitet werden. Der Anschlag kann zusammen mit dem Featherboard und der Halterung im zusammengebauten Zustand unter der…
This is a double exhaust system for the Bosch GTS 10 XC. If you have installed a router in the circular saw, you can also use the suction for the stop. It is then suctioned off at the top and bottom. I copied this from Let, s handicrafts.…
Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…
hi zusammen :), ich habe einen Adapter/Aufnahme für einen wie ich finde sehr coolen vorhanden Federkamm entwickelt um diesen unverändert an dem Parallelanschlag (horizontale Anwendung) der GTS 10 XC verwenden zu können. Anwendungsidee:…
I like to have a ball valve on my Bosch GTS 10 saw to be able to fit the vacuum cleaner with HT pipes of 50mm diameter. I took the original design from here https://www.thingiverse.com/thing:4578649 and scaled it (files are added) to get…
Bosch GTS 10 XC 50mm Schlauch inkl. Doppelkonus super dicht Der hintere Anschlussteil für den Schlauch ist etwas länger, damit der Schlauch eine gute Auflage hat und schön dicht ist. Länge: 75mm Schlauchanschluss: 50mm Infill: 50%…
Le streamdeck est utilisé avec des adolescents scolarisés, en situation de handicap. La précision gestuelle est parfois délicate. Le guide doigts permet d'éviter de taper deux touches proches en même temps. Réalisé en PLA, remplissage 15…
Summary This is a model of a Dodge Viper GTS Coupé (SR II) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated…
Edit: I have now added a version of the baseboard that can also be printed on a 180mm x 180mm print bed. (untested)The disadvantage of this variant is that you cannot get quite as close to the saw blade with the featherboard. There is a…
A featherboard, suitable for the T-slot of the Bosch 10 XC table saw. Heavily inspired by the design of Zeropage, I modified some dimensions by 0,1mm - 0,3mm since the fit was too lose in the original models
I designed this miter bar because the one included with the saw has too much play. The aluminium miter slot is 21mm (when new) but will wear down with use and it will wear more at the front than the back. Instructions: Print the test…
Featherboard für die Bosch GTS 635-216 Tischkreissäge. Ein langes Featherboard mit Nutensteinen und Kreuzgriffschrauben für M6 Schrauben + Muttern. Featherboard for Bosch GTS 635-216 table saw. A long featherboard with sliding blocks and…
This is a charging stand for the Amazfit GTS smart watch. You may need to lightly sand the hole where the charger pushes in from behind to make it a better fit. It needs to be tight but not so much it damages the charger. It will depend…
This is a tool to straighten your filament Print instructions The tool is for straightening filament for easy filling the filament buffer Here is how it works: (ignore the audio book in the backround :D) BOM: printed parts: 1x cover…
Arquivo modelado com inteligencia artificial, qualquer duvida ou pedidos so entrar em contato.
The nut from the original post was too big for my saw so I redesigned one based on the dimensions of the miter slot on my saw. After that I decided that the featherboard itself was a bit short so I lenghtened it by 5mm. I also increased…
Perfect and simple Oil Filter Disassembly Tool for Piaggio Vespa Gts and more. Ø 50x67 mm for PIAGGIO Leader Quasar LEM for Vespa ET4 LX LXV S Primavera Sprint GTS GTS Super GTV GT 60 GT GT L 946 125-300ccm 4T AC LC
I gathered several ideas from the net and added variable feathers to the concept as well as a modified track bar for the BOSCH GTS10XC table saw. The distance of the feathers to the saw blade is given by rotating the board around its…
This is my take on a DIY suction hose adapter for the GTS 635 216 bench saw. My vacuum cleaner from Einhell has a hose with an outer diameter of 36mm and an end socket wall thickness of 2mm. This adapter takes both into account and…
Ich habe Nutensteine für die Tischkreissäge Bosch GTS10XC gezeichnet und gedruckt. Sie sind für M6 6-Kantschrauben gedacht. Da die linke und die rechte Nut unterschiedlich sind, habe ich natürlich auch entsprechend unterschiedliche…
Zundapp KS(GTS)50 Breiband Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
Sliding sled as a replacement for the Vevor cross sliding sled (https://www.vevor.de/gehrungslehre-c_11020/vevor-gehrungslehre-tischkreissaege-600-mm-miter-gauge-ablaengen-winkelanschlag-p_010718981691) for the Bosch GTS 10 XC table saw.…
The main use of this model is for aligning the blade or fence of a Bosch GTS 10 XC table saw. You'll need the dial gauge holder (https://www.printables.com/model/126536-table-saw-blade-alignment-dial-gauge-holder) and dial gauge with a…
The Dodge Viper GTS-R is a legend in the world of motorsport, renowned for its victories in the GT2 category and its iconic presence in the 24 Hours of Le Mans. This 3D printed shell of the Viper GTS-R pays homage to the vehicle's storied…
Another featherboard designed for Bosch GTS XC10 srews M5 and M6 added new knurled srew knobs and a smaller version of the “Nutenstein angle braket V2” design files:…
No 3d printer? You can buy this here: https://www.etsy.com/de/listing/4403675563/adapter-fur-bosch-gts-10-xc This is a remix of https://www.thingiverse.com/thing:4499325 with a male osVAC32 on the top. You can print this standing without…
Bosch GTS 10XC sliding rail (less clearance)
3D Print with ABS or PETG, please do not use PLA. NO Comercial use!!!
Experience the raw power and iconic design of American performance with this 3D printable STL model of the Dodge Viper GTS. This legendary supercar model is perfect for automotive enthusiasts looking to showcase the aggressive styling and…
This fits the charger for the amazfit gts 3 for easy charging
This 3D printable T-track slide is specifically designed to fit the Bosch GTS 254 table saw, allowing you to build your own custom jigs—such as cross-cut sleds or other precision guides—without relying on metal tracks. Whether you're…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Zundapp KS(GTS)50 year 1981 water-cooled Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
The Bosch GTS 10 XC table saw is a good job site saw but if one wants to use it for fine furniture making, the preciseness has to be hardly achieved by finetuning almost every single aspect of the saw. The sliding sled, which the saw…
Einfacher Absaugadapter um die GTS an eine 50mm Absaugung anzuschliessen. Gedruckt in PETG.
Eine kurze Schiene für die Bosch Tischkreissäge GTS 635-216 mit 3 Bohrungen für den Einschlag von M8 Muttern. Beim einschlagen der Muttern vorsichtig vorgehen, damit die Schiene nicht beschädigt wird. Die Schienen gleiten perfekt durch…
Passend zum osVAC System hier ein (ca. 75 Grad) Winkel mit M32 (Geräte-) Adapter auf F32 ("Base-Adapter"). Dieser Adapter findet an meiner Bosch GTS 635-216 Verwendung. Diese habe ich zum direkten Anschluss an das osVAC System umgerüstet…
Thanks to jcjames_13009 for the original model.
Vespa GTS - Spiegel Abdeckkappe ich habs in ABS gedruckt
The original clamping stone on the Bosch GTS 635-216 linear fence does not engage the V-groove of the aluminum profile. Properly engaging inside the v-groove increases stability and accuracy of the linear fence. This is a redesign of the…
Mit diesem Anschlag könnt ihr wiederholgenau schmale Leisten auf eurer Tischkreissäge sägen. Ausgelegt ist er für eine Bosch GTS10, könnte aber auch auf anderen Tischkreissägen passen. Ich habe den Anschlag mit FreeCAD gezeichnet, die…
The Design consists: a: Guidance with a tight fit. Please check the “TryOut.3mf”. In my case the fit gets tight with a left to right orientation (along the x-axis) and less tight along the y-axis. I needed to postprocess the printed…
Le fonctionnement de ce taquet est décrit dans la vidéo YouTube https://youtu.be/nB8tgzVN9ac
OsVac M32-Apdater für Bosch GTS 635-216 / OsVac M32-Apdater for Bosch GTS 635-216
In meiner Werkstatt nutze ich eine Absauganlage, die ich mittels dem osVAC System an den Geräten anschließe. Grundsätzlich kann man eine Bosch GTS 635-216 auch mit einem Standard osVAC (F32) Maschinenadapter anschliessen. Da der Platz auf…
A removable dust suction hood for the table saw BOSCH GTS 10 XC is suggested. A detailed description can be found within the download-files.
This is a Charging-Stand for the Amazefit GTS Required are 4x 2,5x8mm spax screw
Die Aussparung passt für das originale Ladekabel
Slide rails for Bosch GTS10XC 170mm Easily print on all materials without support.
A convenient drawer to hold the tool kit that comes with the Vespa GTS. Also two holders, one for the shock wrench and one for a 17mm single ended open jaw wrench (…
Exact copy of rare badge as replacements are hard to find. For best results print in PETG and get chrome plated, the print may warp side to side while plating but can be straightened when fixed to the car
T nut for circular saw BOSCH GTS 635-216. For M6 bolt
This is a adapter for the quite popular Bosch GTS 10 XC professional table saw to a dust collector system using the osVAC system. The adapter fits neatly in the recess of the table saw. On the dust collector end is a male 32 osVAC…
Y-Adapter for a Bosch GTS 10XC into a 39mm and 40mm tube
There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s < 3.5 h If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-)…
The adapter enabels a second line for suction with a vacuum cleaner. While one side fits to the table saw, the other two are for a 35 mm line (inner diameter) and a 32 mm (outer diameter) line. In my case, I used this for an additional…
Miter gauge for the Bosch GTS 635-216 bench saw. You need two M5 hex-head screws and nuts. DE: Gehrungsanschlag für die Bosch GTS 635-216 Tischkreissäge. Es werden zwei M5 Schrauben mit Sechskantkopf benötigt.
A camlock adapter for the Bosch GTS 635-216 saw. It might fit other Bosch models but I have not been able to test that. You can find the camlock adapter here .
Add your own custom logo to the back of your vespa GTS with this clip. The clip is printed in three parts The clip itself (Should be printed from PETG with 3 perimeters) The logo holder The logo (in this case an apple logo or a vespa…
Back cover for an S1 R33 GTS-T headlight. Printed the cover in ASA and the gasket in TPU. Tree supports everywhere.
Vespa GTS 300/310 Sitz Erhöhung kurz
Printed with Sovol SV01 PRO Print Config: Top.Bottom thickness: 1mm Bottom pattern initial layer: Concentric intial layer flow: 120% initial layer line width: 110% initial layer speed: 20 mm/s Before printing make sure to reajust Y axis…
Vespa GTS 300/310 Sitz Erhöhung lang
This model is a hammerhead nut specific for the parallel guide of the Bosch GTS 10 XC table saw. You can use it to mount your specific attachments, like feather boards router table parallel guides for an integrated router or whatever you…
Main credits go to Nozzle and DrAI for the original design of the t-slot nut and its remix for the Bosch GTS 10 XC. I changed the design to mount an alloy dial gauge holder from one of the big chinese online shops. The original nut did…
I changed the diameter of the suction-side to 30mm by remixing the design of DrEmmettBrown. Many thanks for his work! Category: Parts
Spare parts nr: 2 610 018 234 https://www.boschtoolservice.com/se/sv/boschprof/spareparts/gts-10-xc-3601L30400 I did modify the original so needed a new one.
a slide rail for the GTS 10 J from Bosch 25cm long with 3x M4 Nut holes
charniere amovible à doigts fonctionnelle
Just needed to practice creating something in Fusion 360, so I decided to create a desktop badge from my favorite car.
Dodge Viper GTS, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Upgraded emergency stop button for Bosch GTS10J with window for start button.
Print fenders in ABS or PETG with 100% infill. Foot hooks, AirTag cover, and mud flap should be printed in TPU. Mount the foot hooks to the fender using M5 screws and nuts. Nuts should slot into the cutouts on the back of the fenders.
Auf der “dicken” Seite stehend drucken. Print standing on the “thick” side.
Largely inspired by the model of Chris81, but more resistant
The Vevor table saw gauges come with a standard 3/4 x 3/8 " gauge slot rail that does not fit on the Bosch GTS 10. I designed a fitting replacement for it. You need an additional M6 nut to complete the part.
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
A remix of the well known Maker World Clock for all VESPA GTS fans. If you need to buy the clock part on the net just make sure it has a thread length of 13mm. Want more clock designs? Have a look into our DECORATION collection .…
Hier die etwas längere Variante zum Original. Höhe hierbei ca. Das 67mm Modell ist an das osVAC Neo-System angepasst. Danke an Agar für das Original Modell!
This smartwatch stand can house the magnetic charger of the Amazfit GTS 2/2mini. I designed it specifically for the Mini because the ones I found on Thingiverse were too big and cumbersome and I wanted a more compact design. I included a…
Nice and clean stand/charging dock for the AMAZFIT GTS. Charging connector is just glued in the stand.
Stand for standard charging Amazfit, only the stand is required for assembly, everything is assembled very tightly.
This is an adapter for the Bosch GTS10XC to receive a dial gauge. The user "Nachdenksport" decided that it's a good idea to break with good manners of open source and tries to make money from simple 3D-printed parts, see…
The clip that holds the grille. This was printed using Formlabs Tough 2000 engineering resin for resolution and strength. There is 2 sizes provided. The smaller of the sizes worked for my grille but could've had a touch more length to it…
Der Clip passt in die innere Nut der ausgezogenen Tischverbreiterung. Über die Sechskantaufnahme kann mittels Mutter und Schraube eine Platte z.B. für eine Oberfräse ausnivelliert werden. In den 2 Bohrungen können Einschmelzmuttern…
the Vespa 300 unfortunately does not provide good options for mounting a smartphone holder. I have therefore built myself a mounting aid for the existing on-site pocket holder. Then you can mount a standard bracket for a bicycle…
Print like original model.
Die Einlegeplatte habe ich aus 3 mm Sperrholz gefertigt, 3 einzelne Lagen zusammen geleimt. Es müssen einige Ausschnitte in die beiden unteren Lagen geschnitten werden, sonst kann man die Säge nicht ganz hoch fahren. Die obere Lage ist…
These pieces are meant to core magnetize the Weilong GTS3. I printed these with a Bambu Lab X1C at a 0.08mm layer height, with brims enabled at 5mm width for adhesion. At least for the X1C, I've had trouble with getting the printer to not…
Mount for OSB to attach a BOSCH GTS-635-216 with mount-shoes to a floor unit. Fusion 360 File with Parameters. Step-File included! You can use that design perfectly together with https://www.thingiverse.com/thing:5292332 - so you can use…
This has to be one of my favorite builds. Big blower, supercharger, wheels and everything. Also, the steering wheel is on the wrong side, since Summernats is placed in Australia.
I live in a place where snow, wind and cold are present for 4-5 months in a year, so an ice-scraping tool has to be efficient, as i have no garage. So there it is ! Features : Coarse and fine toothed scraper for the thick ice. Use the…
Stand for Amazfit GTS 2 mini smartwatch. It is divided in two parts using magnets. This is an easy way to disassemble the charging part and carry with you.
holder for Yenkee wireless keyboard with next level racing GTSEAT Addon
Watch holder for Amazfit GTS, it's a holder for watch a charger.
Since the Bosch GTS miter slots have a special size and I wanted something less flimsy, I created this miter bar which has the holes in the correct position so I can attach some machined hardware on it (see picture). There are relatively…
Disclaimer Modifying a tool like a table saw might be dangerous! So if you want to apply this modification then you do it at your own risk! Description Accurately adjust the depth of your blade on the Bosch GTS10XC. Based on an idea by a…
Difficult to print the bridge over the bolt. Needed some rework afterwards. M8 screw.
