Liczymy pasujące modele…
Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
This is a more elaborate bottle opener (using the same basic profile from my OpenScad Bottle Openers here ) which aims to be used with only one hand. Tip: Use your thumb to keep the opener in place. There are two similar designs:…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got tired of fiddling with filament clips that require you to have three hands - One to hold the filament, another to hold the roll, and a third to put the clip on! So I made a tension clip that fits onto the side of the spool and then…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
You should have all the materials for this build on hand, as I only used leftovers from the MK3S+ or the enclosure: 3x M3x8 screw 1x M3n nut For detailed assembly instructions see attached pdf. Achieving a satisfying snap when closing…
Wydruk około 7,74 €–9,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for a 500ml beer can with dimensions 66m perimeter and 168mm. Model is made with ideas of real space rockets but with a big circle window to see, what can is inside. There are printables file for MK4S. If you ask, I can…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Check out https://www.prusaprinters.org/prints/132320-improved-one-piece-capo for an improved version of this capo. No fiddling with screws and levers - this one-piece capo clips on with one hand. The presser bar is contoured for a…
Snap this onto your DualSense and you've got an all-right controller! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the…
Single-handedly the best DualShock adapter! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the thumbstick. There is a 4-to-1…
It works like this: Two different versions are included. One for left-handed and one for right-handed gamers. Print the parts in PLA with regular 0.2 mm layer height settings. All parts can be printed without supports. (the A button has a…
Description: This is a simple model to help hold a book with one hand. This is surprisingly useful if you break your arm, or if you are reading a book and taking notes. It is a really fast print, (only 3 minutes on some printers) and the…
See the description of the One-Handed Xbox Series attachment . This is the same device adjusted to fit the older Xbox One controllers. Two different versions are included. One for left-handed and one for right-handed gamers. Print the…
D&D Knight with 2 handed Warhammer
I like the original design, but it seams it is designed for left handed. My right hand is reserved for the soldering iron. So, the files are mirrored, to be used with left hand. It sits better in left hand, and scroll cog does not poke…
The One-Handed Thumb Book Holder is the perfect solution for avid readers who enjoy reading on the go, whether standing in line, traveling, or simply lounging around. This sleek and ergonomically designed accessory fits comfortably over…
So I need some new feet for my Lasko box fans... who doesn't... those things break so easy it's criminal. In any case I looked on Thingiverse and there are several available but they all need lots of support. If I'm going to use extra…
I am still not able to print a working figure but I want to use this sword if I managed to have a sturdy Lucky 13. In the meantime I would like to share my design with you and would be happy if someone else could use it. If you post a…
Improvements: Right-handed version Longer versions for better ergonomics 60 mm version fits perfectly on a MK4S print bed 115 mm version has the same grip to stock distance as a Steyr AUG Magnet holes were modified to fit the more common…
Assembly Description List of non-printed parts 1 pcs - M5 Hex Cap Nut GoPro knobs are in three different lengths for screw: M5 50mm screw with hex head M5 40mm screw with hex head M5 30mm screw with hex head
Put this on your pegboard where you will need it. It presents the marker so that you can easily grab it. Pull the marker straight out if you want the cap with it. If your peg board vibrates, you can store the marker twisted to keep it…
took a riptide mainsail holster left hand iwb and converted it to right hand owb
Keep your thread snips from stabbing everything in your drawer. These covers are simple—but the little details make a big difference. This improved version adds: Thumb and finger grips for better control Push blocks for easy one-handed…
Use the SLOT version only if you have a knuckle grip or need to slide the controller in and out quickly. Otherwise, the HOLE version will be easier to print and there will be less ringing artifacts on the cup portion of the part.
Quick and easy print, I turned off top and bottom layers so that you can see the infill, but it really doesn't matter.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Inspired by an idea from @3DBrooklyn, I came up with this design that is easy to…
Drop-in replacement whammy bar base for Wii Les Paul guitars, in both left- and right-handed configurations. Matches the original design as closely as possible. Printing While PLA can probably be made to work, I recommend printing the…
EDIT: older Master 3 version bottom plate (not tested !) added in files MX master 3S for lefties This guide will show you how to convert an existing MX Master 3S to a left handed version. The conversion is reversible, however you will…
Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.
This adapter allow you to drive an RC car one-handed, use your index finger for throttle like usual, steer with your thumb. Great for driving between obstacles on a crawler trail or when you're also trying to film while driving. The inner…
This is a remix of the pistol grip model. I have redesigned it so it can be used as a stock. I would print this at a high infill density so that it is solid. I have used mine, at 60% density, for 3 weeks and it works a treat! it is useful…
I wasn't happy that the icons had to be printed out separately and adjusted so that they don't interfere with each other. So I took the icons, scaled them down 75%, and embedded them 2mm deep into the button pushers. I had to make the…
If you often hold your books open with one hand and find it difficult to position your hand just right to keep the pages open, this little gizmo can help! The sides are wide enough to hold pages open, and the edges that go around the…
This is a contraption to assist in feeding solder when making multiple joints. It lets more solder be advanced with minimal movement or effort to reposition. A 3d printed hollow tube forms the base and with a wire ferrule connection at…
Usage This roller clamp can be used on elastic tubing ranging from only a few millimeters up to 16 mm in diameter. The main difference between the models is the wall thickness of the tubing: The 12 mm model works for a wall thickness of…
This comb can be used with left or right hand. I've shortened the handles somewhat as well, making them sturdier. This was quickly done in slicer but I found the fix to be very useful, so I thought I'd put it here. Due to reduced handle…
25 g · 4 full-size SD cards · no supports Push the lever with your thumb: Four SD cards step out of the case at different heights, each one easy to reach. Push it back and they disappear. One hand, one motion, no lid to open and drop.…
Nut M8 left handed, 13 mm width across flat, washer included, 3 % tolerance build in. Printed in PETG. Please share your makes! Mutter M8 Linksgewinde, SW 13, mit Bund, 3 % Toleranz integriert. Gerduckt aus PETG. Bitte teilt eure makes!
Holder and spacer for wall mounting Bessey EZS one-handed Clamps. They are designed in a way, that they can be put side-by-side and have the same space between them. So if someone have more than 4 clamps they can be mounted in one row.…
Inspired by the "One-handed removable paper roll holder kitchen wipe tissues" from Barebaric, I designed my version to work with "Sy's Peglock - Locking Pegboard System", a 25mm pegboard and a roll length of 260mm. For the assembly, 4…
Some weapons for dummy 13 based on dark souls The mace is a remix of here https://www.thingiverse.com/thing:5259588 The weapons are separated by pieces I put some cubes on the base to avoid warping when printing I hope you like it Any…
This is an easy-to-print, easy-to-use one handed adapter for your Traxxas TQ or TQi transmitters. I recommend printing it with three wall loops and with 25% infill. Enjoy!!
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces, straight…
Usage I designed it for usage on a french cleat with a depth of 15mm with the Wolfcraft PRO series clamps in mind, specifically the; Wolfcraft PRO M One-Hand Clamp Wolfcraft PRO L One-Hand Clamp Printing You should be able to print it…
My take on Yogi - The ultimate one-handed fidget spinner! No Supports. No glue or screws. Can be 100% printed (or use a 608 bearing from an old fidget spinner or skateboard). Settings: 0.2 Layer height or finer. A 50-60% infill helps with…
I made some improvements off of the original design by Vexelius. This version has locking indents and a fitted bottom indent so the joycon doesn't move around nearly as much. Additionally, the locking indent will keep the joycons from…
I made this book page holder and fidget spinner inspired by the Baterang from The Dark Knight movies. It's perfect for school books You can easily read your book with just one hand. It features a rotating ring in the middle for more…
Modification for the lever to make the wallet usable with just one hand. You can mirror the part in the slicer for use with the right hand (all the parts used from the original wallet must be inverted too).
The model is based on models that are readily available to buy (e.g. on Amazon). I modelled this one by hand and improved the ergonomics. I also provided 2 versions, one for left-hand use one for right-hand use. You can get a bunch of…
I found it awkward to use the knife in my left hand, as the springs doesn't work correctly when you touch them. It is based on the "negative hook for better catch - guided" files. Basically just mirrored everything except for the makers…
For situations and people that may only have one hand free this simple quick clasp serves the purpose of a traditional button but adds a little flair and convenience. Options: Left , and Right handed variations provided. Option A has a…
larger sized mod co-created with caregiver for an elderly person. Screw added for stability.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
See original model for print / assembly instructions.
This is a centerline marking scribe, similar in general function to many other centerline scribes. However, it is custom designed to fit the Pentel GraphGear 1000 (PG1019) 9mm mechanical pencil (7mm & 5mm would probably fit as well; other…
Update 4/25/23 : Added a parametric Fusion360 version that you can customize to your liking, has built-in tolerances for of +0.1 for magnet diameter (depth is exact). Enter the values you want for your magnets and have fun! Update…
Glock Trigger Stop Remix for left hand Print instructions Category: Sport & Outdoors Summary Glock Trigger Stop Remix for left hand Print Settings Printer Brand: Creality Printer: Ender 3 </div> Rafts: No Supports: No </div> Resolution:…
We are SalvageGarden Ltd , a volunteer-led community makersapce focused on co-creating assistive technology (AT) with and for people of diverse abilities. Consider supporting us with a donation – every little counts. How to assemble
took a riptide mainsail holster right hand iwb and converted it to left hand owb
Remix that holds the left controller for the lefties
You Can Use It To Hold A Book With One Hand
Tool to make planting just a little easier and bit more interesting
A D&D Skinchanger Berserker typically refers to a thematic, often homebrewed, Barbarian subclass or character concept that combines rage mechanics with temporary, bipedal beast transformation (e.g., a "bear-man" or Beorn-style character).…
The print comes in many parts that will need to be clipped together. When clipping on the main base hook the arm on the left side than push the part up until fully clipped and the underneath is mostly flush. For the LT and LB buttons the…
A DZP mk2 left handed holster. I got this model on the DZ website but you have to put in a bunch of info on it and it's kind of hard to realize it's a thing because it's not on any 3D websites so I thought I'd put it here :) Use M3 screws…
This is a remix using some parts from the original PrusaCaster and the Bexgears remix. Each part was then mirrored. it is meant to be used with this kit:…
I designed these sorting trays to be as light as possible and to store them in one piece . Openings are really narrow - from 12 to 20mm - to best fit gaps in plastic cases you sort your screws/nuts in. Three versions included - each for…
People with limited mobility in their hands, often due to conditions such as Parkinson’s, arthritis, cerebral palsy, and other motor control disorders, face significant challenges in the realm of performing daily tasks. The one handed…
This can also be used without the O-ring and sized up for any needs. Very easy to open and close with one hand. Printed in PETG
I was always struggling when screwing/unscrewing something with one hand only, this helped me a lot, hope the same for you! You can swap the top part to fit different size of wrenches using the same bottom part.
This eBook holder is designed specifically for the Kobo Clara, allowing you to hold your device comfortably with just one hand. With two cut-out holes on the back, you can easily insert your fingers, providing a secure grip while you…
Move some things around.
Camera holder for an action camera. Different ways of holding. One camera, camera with the display, two cameras. Floating. Print instructions Accessories: Hot Shoe Adaptor With Tripod Mount STL:…
I am a new maker, and I hope you enjoy this book holder!
Overview This is the same as the V3 but uses standard keyswitches. The Quirkey is designed for use by people who cannot use a conventional keyboard because of limited mobility or vision. It uses just 6 keys to emulate a full 101-key…
I made the opening a bit smaller to fit a US penny and added a spot got a 6x3mm magnet. I also rounded the sharp pointy end. The ones I’ve printed break on the first use like the comments of the original. Let me know your results. PETG…
for your nerf guns, i present an accurate scope. comment, like, and request what you want next!
Xbox Controller mod for gamers missing a hand The Idea: For gamers missing a hand, the analog stick and front facing buttons can usually be manipulated using the stump. However controlling the triggers presents a challenge as there is no…
Everyone designs their holders at 180-degrees. Not only is this uncomfortable, it can damage your bindings. I designed this less extreme book holder to save your books from damage, while still allowing for one-handed reading. Works on…
No special build instructions for this main body. The low profile nut only has two lines (circles) in contact with the printbed - mine stuck fine during printing but I added a 2-line skirt to reduce the chance of nozzle-snot messing up…
These are 2 right handed versions of ryo1kato's 'One-hand Kindle holder (Kindle 8-Gen, 10-Gen, Oasis)' holder, one is for a small hand and the other is for a larger right hand
A very simple one handed grinder and funnel to grind and make joints with cone's
This is a remix of LoboCNC's caliper design. Full credit to him for creating an excellent model. All i did was mirror the markings and orientation of the tool. This version has been optimized for use by left-handers. No need to adjust it…
Why use toiletpaper instead of Tissues? cheaper more sustainable (smaller in size per sheet) flushable conveniant because tp is always at home How to set up: in the future i maybe add a parametric version. Print both parts (customize or…
Simple ruler in metric and imperial designed for left-handers The the scale arranged "properly" - numbering starts on the right, and gets higher as it moves left.
One-handed pellet box with rounded inner rim for easy access. Fits about 250pcs 4,5mm / .177 or 170pcs 5,5mm .22 Diabolos. Should easily scale up or down if needed. Added 2 files with holes in the bottom to fit 8x3mm or 10x4mm magnets.…
Left handed version of joshuacant's Quest 3 paddle adapter
The textured pad on the end of the joystick arm rests on a desk or your leg and the controller is moved around to move the right stick. The levers on top allow you to flick up with your middle and index finger to control L1, R1, R2 and…
grip for one-handed use Can be used lying down
I also included the FreeCAD source files , so you can edit them on your own without any proprietary software. Please share the models if you make your own. If you are in the EU and want to support my work, you can support me by buying…
Replaces clamp pad on older, large-size Irwin One-Handed Bar Clamp originally equipped with yellow rubber clamp pads. Might work on newer models too, but not tested on those. Print in flexible filament like TPU.
Yeah this is probably quite odd, but if you have an 8BitDo Micro then you may not have tried using it vertically in one hand. It turns out, at least for me, that I can reach almost all the buttons on the controller when I hold it like…
this is part of a clamp. I have tried to use as much detail as possible in the workpiece. I had a problem and made my own design. If you like the model and would be kind enough to support me monitarily for my work, consider supporting…
I needed a cleaver for one of my next projects, so I created one, looking forward to all of your remixes ;) If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding…
I created the Metalworker’s Pacifier when I was too cheap to buy a new chip collector, and I didn‘t like the large size they always came in. Printing the parts: The print is straightforward, but you need to make sure that the parts stay…
Printing: The hangboard can be printed without support . I recommend printing in fuzzy skin mode for the surface to have a good grip. Mounting: The hangboard has four 5mm diameter screw holes, they are spaced apart 60mm horizonatall, and…
This is an almost fully printed tool to allow one-handed soldering on the Pinecil without having to ziptie an unwieldy contraption to your perfectly usable soldering iron. Just assemble, load, and spin the wheels to push solder onto the…
UPDATED - V2 NOW AVAILABLE IN REMIXES. You'll still need nut/bolt info from this model but if you want the TPU bar clip version then get the STLs from the V2 remix. ============================================================ This is…
A simple paper towel holder that is made of three 3d printed parts and a rubber band. Can be used with paper rolls of any length. One-handed use and reload. Parts can be secured with double sided tape or screws. Just attach a rubber band…
One-handed Xbox Series X|S controller by Akaki Remix. I only needed RT and RB and tought I'd share it. So here it is. Pictures Coming when it's printed.
