1850 modeli
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Wydruk około 27,16 €–33,20 € nettoWstępna wycena jednego wariantu
Printed at 0.2mm resolution with 20% infill and 2mm brim. Works best on carpeted floors.
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
The Height Z Layer Shift Test is designed to verify that there are no layer shifts, ensuring stability and accuracy before attempting a model that utilizes the maximum Z height of the printer. Print settings Nozzle size 0.4 / 0.6 Layer…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
SUPER PINDA 1.5mm adjustment tool 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Only 10 minutes to print. No support needed. Keep in mind : Always recalibrate the Z-live after a Super…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 8-stacked print which includes a modification to the model, the support tower for the pins, and the slicer settings. Each piece has a height of 12mm, which is enough in my experience, especially with PETG. I've also added my own…
Wydruk około 4,79 €–5,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this you allways see the real height while printing on your camera. You will need 2 M4 Screws and 2 Nuts for the Extrusion. Printed or for example these that you can get on Amazon:…
Wydruk około 6,95 €–8,49 € nettoWstępna wycena jednego wariantu
A remix of Ikea Skadis Bin Dividers by JuniperandSixth
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
You can use the height gauge to measure and keep track of your settings on any piece of equipment in your shop. Use the ruler in the center of the gauge to lock in a measurement and then setup all your equipment to match the height or…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Stack of manta face shields that is 8 high. This is my first try with stacking 3D prints but it worked just fine on my Prusa printers so I thought I would share for those who want to try it but aren't sure about stacking it themselves.…
Wydruk około 10,96 €–13,40 € nettoWstępna wycena jednego wariantu
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm. A couple of years ago I bought the comic book and scanned the page with the blue print of the rocket. Imported the scan into the modeler and used it as a…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Height gauges in 1/4" increments. Standard file measures heights from 1/4" to 2 1/2". The intermediate file measures from 3/8" to 2 5/8". Can be used to measure heights underneath things that are hard to measure with a tape or calipers. I…
Wydruk około 3,37 €–4,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print Settings Rotate the model onto its side for layer strength. I used 15% triangular infill for my print, but if you need additional support increasing the infill should be fine. If all else fails, increase stand_thickness . Parameters…
Wydruk około 6,59 €–8,06 € nettoWstępna wycena jednego wariantu
To have all top surfaces of the model be at their intended height, you must either use 0.1mm layers everywhere (except 1st layer), or you can use 0.3mm layers with thin layers only where needed to get the correct top layer heights. Using…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Did you also happen to dig out the bowden, which is used to adjust the height of the headlamps, while changing the bulb in the headlamp? With this cover, that won't happen to you. Print without supports. CZ: Taky se vám stalo, že jste…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified the build of Potorale to add temperature variations in 3mf format using prusa slicer and tested with core one at least. Other parameters: closed door, no vents on top of the printer. PETG is easier to print in 255C while tend to…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shortened the height of the removable bin so that Rui's Nebula Cam can still be utilized. Removed the Nebula Cam static mount
Wydruk około 2,04 €–2,50 € nettoWstępna wycena jednego wariantu
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. The Duc Ba Church model is 60mm tall, corresponding to a scale of 1/1000 of the real-life structure, and can be used for architectural…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
Wydruk około 5,87 €–7,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parametric OpenSCAD file for Layer Height Tool generation. Pay attention to your printer's first layer height. (Most print a thinner first layer.)
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. The Bitexco building is 65.5mm tall, equivalent to a scale of 1/4000 in real life, and can be used for architectural projects or dioramas.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a variable height fridge door schelve adapter that I designed for my Siemens KG49E4ICA fridge, but I guess this can be used with other Siemens fridges as well. I designed this because the predefined schelve mount positions were…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model adds adjustable-height feet to the Logitech Slim Solar+ K980. One of the slimmest keyboards on the market – and certainly the slimmest I ever owned – the Logitech Slim Solar+ K980 does not come with adjustable legs. While it is…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Magazine Rack Maximum Height. As tall as a Prusa MK4 can print. Remix of https://www.printables.com/model/594904-magazin
Wydruk około 8,35 €–10,20 € nettoWstępna wycena jednego wariantu
Knob to adjust the seat height on Nissan Navara
Wydruk około 3,92 €–4,80 € nettoWstępna wycena jednego wariantu
This model adds fixed height feet to the Logitech Slim Solar+ K980. One of the slimmest keyboards on the market – and certainly the slimmest I ever owned – the Logitech Slim Solar+ K980 does not come with adjustable legs. While it is…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Any feedback is welcome This pencil cup was designed for educational purposes. It demonstrates the difference between various layer heights and how these layers are laid down by the print nozzle. Printing/recommendation: Cup and filament…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Remix to make a taller version of the original design for my use case. I crudely increased the Z dimension to 125% of original height, holding X and Y fixed. I include both STL and 3MF with a screenshot showing the height of the remix…
Wydruk około 5,83 €–7,13 € nettoWstępna wycena jednego wariantu
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
*I thought the MK3/4 were 250mm in height similar to most other printers in that size category, I will be working to add a version that fits the 210mm height build volume of those printers Scaled down to fit the bed of a standard 250mm…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). Update: In the meantime I also created a version…
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). There's also a version which has more shallow…
Collection of Gridfinity basic cups height 6 (46mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
This Gridfinity compatible holder has four spaces in a 1x1 holder. The front two are 8 units high and the back two are 12 units high - perfect for a few pairs of tweezers and a feeler gauge - these tools are always right beside my…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts and the box itself (number of rows/slots) can be modified in Fusion 360 (f3d file available in the files section). IMPORTANT: If you want to…
I always wanted to design a nice looking stackable crate primarily for testing my 3D printer. This crate is designed to be printed without supports by relying on bridging capabilities of filament and printer. Best print settings are 0.2mm…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
Collection of Gridfinity basic cups height 3 (25mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
This model is a remix of the original “ Catch-All Trays / Desk organizer & Catch-All Trays / Desk organizer - stackable remix ” model. It is fully compatible with this remixing models and adds two more height sets of containers to them.…
Collection of Gridfinity basic cups height 2 (18mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Collection of Gridfinity basic cups height 10 (74mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Collection of Gridfinity basic cups height 4 (32mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Collection of Gridfinity basic cups height 5 (39mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Summary This is a 1:24 sclae model of car lifter in a kit card style. They also fit the 1:24 models I have published. Can also be used for 1:18 scale models. After printing, the model can be assembled with the help of integrated…
Description Parallel Line Scribing Tool A practical tool for drawing perfectly level lines parallel to the surface, eliminating the need for a tape measure. Simply insert a pencil into the desired hole and slide the tool along the…
Build it as high as you want! I recommend printing with fuzzy skin.
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
Model of a traditional hot air balloon. The cool part is that the balloon part is divided in 12 sections of the same size which you can click together with a pin-hole connection. You then use the ‘Bottom’ file to keep them all in place.…
Collection of Gridfinity basic cups height 8 (60mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Collection of Gridfinity basic cups height 9 (67mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Collection of Gridfinity basic cups height 7 (53mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
What is it? It is a height adjustable table with basic dimensions (length x width) of 225x200mm. The height can be adjusted from 115mm to ~ 200mm with a crank. The table is sized so that it can be printed on the most common printers such…
The extended handle version can be used not only for the rear left bed level point but as a regular shim as it is more convenient to install
Stay consistent with your ball height. I saw these being sold in the Club House at one of my local courses and wanted to make one. In the one i made you can see in photo i made a color change and started white at 3.20mm and changed back…
To reduce the gap between the wall and my tablet frame, I created a specific Quad Lock universal wall mount with a height of 8.8mm.
Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.
Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…
This is a basic height-adjustable shooting rest using a screw-and-locknut adjustment. It is designed such that no brims, supports, or rafts are needed to print. There are four components, but you will print a total of five parts. The…
Heyho I make knifes and for the handles I dont want to use my very heavy height ripper all the time. So I designed this height marking device to use with a normal pencil (7 mm). There are two versions. 1. 7,5 mm - 65 mm markable height.…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…
The original design is taken from Miguel Camba , who was inspired by Alexandre Chappel's drill bit tray . I reworked the Fusion360 file to have a better adjustability. It is not perfect yet, but spacing, widths and lengths are now fully…
Collection of Gridfinity basic cups height 12 (88mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Collection of Gridfinity basic cups height 11 (81mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
I printed with 3 walls, 4 tops, 3 bottoms, 15% cross-hatch infill, 0.2 layer height (for better layer adhesion) in Sunlu PLA+. Model has slight chamfers to insert a board (600x210x16mm). In case anyone wants to update the legs to their…
Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm.
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.
****FINALLY UPDATED to address lame design flaws**** Added threaded couplers to attach the post and post extension together and the post or extension to the top. If the coupler is too big on your print, scale it down a little in x and y.…
Reduced the height of the original base to 5mm, also changed the bottoms of the scenes to fit into the base. The hole width is 35.6 mm. I put cheap (22€/24 lights) LED lights from Amazon into it. Easy to print, i used white SUNLU PETG for…
Last night I had to readjust the Super PINDA on one of my printers. I found a bunch of height gauges for the old PINDA/MINDA on prusaprinters.org, with a height of 1-1.2 mm: https://www.prusaprinters.org/prints/27679…
An accesory to lift your Gravitrax-rails. Use the enclosed F3D.-File to scale the height to your needs. Contains files for: 1HU - original height 2HU 3HU 4HU 5HU 10HU Print instructions Print in PLA. No support needed.
I am an avid mountain biker and have an appropriate bike. When I'm not rocking the trails, I ride the bike to work, or sometimes in the city to shop. Here it annoys me that I always have to lean the bike somewhere or lay down. So I have…
My printer surface was not completely level and was causing my K1 to wobble more during a print. After they were installed I adjusted the height of each foot so the printer sat solidly on the workbench. I then recalibrated the input…
This is an original design for a full scale side table made entirely from 3d printed parts. It was inspired by the Print-Tables contest, celebrating the launch of Printables.com. Each individual part fits within the build volume of a MK3…
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
Description PDF Easter egg Another Easter egg model based on mandala geometry. Model is optimized for print without supports. Print instructions material: PLA infill: 20% gyroid layer height: 0.2mm supports: no Recommended filament:…
The height-adjustable table or chair height is adjusted by turning the board. I recommend experimenting with the length and distance of the shoulders, the height parameters can change. When folding, I recommend drilling the holes for the…
The Avatar 2 product has a very close distance from the ground to the sensor. So I think using my foot cover will be helpful.
——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
A one layer test to help make sure your Z-height is correct, use .2mm layers, select print and then use live adjust Z to tune in your Prusa to the perfect layer height. Your as it lays down the diagonal lines, the lines should be able to…
A simple support for your oversize gpu. I used to sell these on Etsy. I don't anymore, so I thought it would be nice to publish these for anybody to print themselves. Print with something that can withstand higher temperatures (ideally…
Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…
A hex/drill bit holder for Gridfinity that holds 4 rows of 10x 6.5mm hex bits. Each hole has a 0.5mm tolerance so the bits fit securely and can't rotate, but can easily be pulled out. I've left space below each row to print out labels.…
These are non-marring TPU endcaps that slide over the top and bottom of happymaker 's Adjustable Height Support model. The bottom prevents the base from slipping and the top prevents the part from scratching the lifted item. There is a…
The most useful and easiest way to adjust your z-height.
Collection of Gridfinity basic cups height 18(130mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
I printed it on my Ender3 v2 in black Gembird PLA. At first I printed with the same settings as zuberio recommended, but had issues with separation in the horizontal joints. I was able to improve print by reducing layer height to .2,…
Add a touch of modern design to your kitchen with this stylish and practical paper towel holder. Surrounded by smooth 12 mm bars and featuring a subtle guiding groove, this model combines clean lines with functionality. To ensure…
This remix was created for reasons when you use these compartments from the original model, for example in a drawer, but there is some free space left on the side. These models are 20 mm longer in one direction than the source models: “…
The original model works great but I found it difficult to align the bit while using the straight edge. I simply added 2 cutouts to provide view from all 4 sides.
