452 modeli
Human head to use as a prop, decoration, or as a friend in the late night studying. Designed using blender software.
Wydruk około 16,46 €–20,12 € nettoWstępna wycena jednego wariantu
Ninjago Ghost Hunter shoulder pads from Season 3 of Dragons Rising! Design based on the show. Also working on other masks and accessories from ninjago. Finally have access to my 3d printer again so expect to see more models in the coming…
Wydruk około 13,11 €–16,03 € nettoWstępna wycena jednego wariantu
There are left and right models (as hangers tend to have a forward sweep to the shoulders). Print one of each. Supports are required.
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
T800 taken from many components here on thingyvers. I decided to whip up a T800 bust for a mates birthday. Then I got carried away and designed these make shift shoulders, then I couldnt help myself again and added some hands and so on.…
Some simple shoulder buttons I found online.
The 3 plates can be attached by glueing straps to the inside of the larger shell and to the outside of the smaller one. I made this one for the right shoulder. It's not perfectly symmetrical, so if you want to use it on the left side I…
I made this mostly for the Vanguard 13, but it uses the same mounting system as the stock ATAB cannons. You can use it with the multi-arm backpack I posted a little bit ago. For added flair, you can print the bottom of the gun in a…
I tried to respect the original design as much as possible. Print settings: Filament: PETG, PLA Layer height: 0.15mm Supports: no Perimeters: 2 05/04/2022 Add shoulder parts "CShoulder.stl", "EShoulder.stl" 09/04/2022 Add shoulder parts…
This model is compatible with the lego system.
This is a holder for a Joycon to make it more comfortable than using it on its own. I have included shoulder buttons on the holder so there is more to press. There is an included version of the STL with these buttons removed in case…
Remixed by preventing the shoulders from dropping when the figure is posed. Replace the armor shoulders with this remix to be able to use the shoulders for the skin. Download all other parts from Soozafone link
This model is compatible with the lego system.
This is the second piece of several pieces that will eventually make the Predator gear. The idea is that these props could be used by cosplayers. This one the Shoulder Cannon Backpack for my Plasma Caster . It does not require any glue or…
Highly recommended the use of Hunky_clavicle_2mm_added_for_hip_armor.stl https://www.printables.com/model/747026-hunky-13-dummy-13-variant-larger-clavicle-shin-and/files
This is a digital 3D printable model of Mandalorian Mudhorn signet shoulder armor . The download contains 3D models ready to be 3D printed on a 200 mm print bed in STL and OBJ formats. It’s placed on the print bed as we would print it to…
Hello! I'm offering this set entirely for free! It is intended as a demo of what the rest of my line of digital files looks like, so I do hope you give it a try! Upon downloading these files you will find, as always, a complete…
Another cool Pep files from Pepakura.com Please always check the sizing suits your needs and adjust accordingly Cheers Jace
Cool Curved Shoulder Plate
This model is compatible with the lego system.
The Mandalorian beskar armor shoulder. Modeled from scratch based on on-screen pics. Use two glued elastic bands to secure it in place, the lower one around the arm and the upper one around the chest. UPDATE: Remodeled the shape to better…
Note: I wanted to create some modern-ish shoulder armor for cosplay and started with some Helldivers armor as base. As i progressed with prototyping i felt like it wasnt quite to my liking in how it looks, but still wanted to publish it…
This model is compatible with the lego system.
This model is compatible with the lego system.
Great for people who need to carry bags but still hold hands with a child or hold a stroller. I designed a 3D printed bag support that can be carried by hand or worn on the shoulder. It is made with PETG filament for the main structure,…
This model is compatible with the lego system.
I created a version of the “Narrow Outer Shoulders” for the Prusa Mini some time ago (https://www.printables.com/model/101956-r130-outer-shoulder-for-180x180-printbed) and printed quite some pieces since that day. Now I do own a bigger…
This model is compatible with the lego system.
The last pieces I need to smooth out my whole model was to round out were the shoulders and biceps. The biceps pieces from Smooth were good, but it needed better shoulders. I had to tighten them up, and make them smaller and more fitting.…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is the second part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
the Mandalorian's shoulder armor both the normal one and the one with the mudhorn insignia
Parts needed for a simple shoulder rig following 15mm Light Weight Support standard. For mirrorless cameras or smaller. The base plate screw spacing is made for a smallrig camera cage. Metal 15mm rods are needed for final assembly.…
This model is compatible with the lego system.
Can be used with both the Male and Female Carbon 13 Models.
This is another piece of several pieces that will eventually make the Predator gear. The idea is that these props could be used by cosplayers. This one are the armour plates for shoulder and chest. It does not require any glue or…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
remix from https://www.thingiverse.com/thing:2334264 The original idea is great! I wanted shoulder mounts for my gopro and insta360s long time and finally found the Nicrombious's one! But I also found some stress concentration on original…
This model is compatible with the lego system.
This was a request after I did General Kenobi's Armour. Sorry its taken so long. Just trying to catch up with a back log of requests. Please check the sizing suits your needs and post some pics of your progress if you do take the…
Replacement part for Dillon XL650 Press. Reinforced with thicker walls. Locking lug for secure installation (insert & rotate to lock). Can be used as a temporary replacement for the genuine Delrin powder bar reset bushing, but probably…
This model is compatible with the lego system.
Hi Steve, Here ya go buddy. I assume this is what your after ; ) I'd uploaded the suit to Etzy to generate a couple of $ so I could buy material for my 3D printers. But it hasnt really been a great success, Still I probably should have…
This model is compatible with the lego system.
This is made for the right shoulder
This model is compatible with the lego system.
After seeing the Lucky 13 articulated figure by soozafone I knew the amount of articulation could be used for a lot of variations, and this was one of the ones I immediately started working on. I replicated the head and split it into a…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This was an 18h print at 0.2mm layer hight. No supports. I printed v_1.1 and have made minor adjustments to the v_1.2 (spot differences from photos to model). Will need make additional refinements. Like the second tone fillers are way too…
(I have been busy updating all my Phase 3 trooper parts and they should all now be scaled for 1:12, 1:6 and 1:1 and I have recently added the left knee part and now this piece.) Hi, still learning to 3D model here, I created from scratch…
This model is compatible with the lego system.
sholder mount in my skeleton shattered from over tightening so i made a replacement
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Simplistic 3D model of a shoulder pauldron. Smooth, reasonably thick and about the right size for a large build. Resize and remix to your liking.
This model is compatible with the lego system.
This is Jhin's shoulder cannon from League of Legends! This model was ripped from the in game Jhin model and edited to look better. I would recommend modifying the model in whatever program you prefer to use in order to shape it to your…
These are some simple shoulder straps that people can use to mimic the ones seen in season 3 of the Mandalorian
Hi Anthony, Just doing the shoulders now so should have them loaded up later today. Do check the sizing suits your needs and let me no what you think, Cheers Jace
3D scan of Shoulder Blade Scan - Scapula (Right) Missing Coracoid process! (part of the bone is missing) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection…
This model is compatible with the lego system.
These are the 3D models in .STL, .3MF and .step format of the shoulder buttons for the Sony PSPGO (PSP-N1000) handheld console. The left shoulder button on my PSP GO broke and I could not find a replacement button. I modeled and printed…
So having looked over cap that it appears that the creed mandos have scavenged whatever they could find... I saw mudtrooper shoulder bells and biceps, shoretrooper bells and some post imperial bells Shoretrooper Shoulder bells and…
The CMPSR is an open source 3D printed folding shoulder for violin. This prints with minimal supports, and the areas which do require supports are covered by the foam pad. This fits a standard full size violin. Materials (4) M5x10mm bolts…
This model is compatible with the lego system.
Here is my third version of a costume prop for Tom Clancy's The Division video game. It's some kind of shoulder beacon / gizmo that all the characters wear. I'm not really sure what it does in the game, but if you're making a costume for…
This model is compatible with the lego system.
A washing machin has teared my wife bra shoulder strap. Both ring and "eight" were destroyed. The fix was needed - infant feeding bra. Open designs were made to avoid ripping and sawing strap loops - stitches with high load and…
UPDATE: added scaled versions in 1:12, 1:6 and 1:1 scale. Although this model is now obsolete as I have since made a new non remixed version (see my other models) I will leave this version up for those who want it as some may prefer this…
This model is compatible with the lego system.
This model is compatible with the lego system.
Shoulder armor parts for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included are 2 versions, v1 with no raised ridge and v2 with raised ridge to give you options for how you wish to customize the…
Another awesome prop from Marvels Thor 3 "Hulk Helmet" I've left the centre of the helmet hollow incase you want to get an old brush from the local hard ware and add actual brisells. please cehck the sizing suits your needs as the Hulk is…
There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this month's release patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…
Print at 35-60 degree angle . use supports.
I used tinker to lengthen the clavicle because I wanted that broad shoulder look
As a special request to Nicole Davis https://www.thingiverse.com/daviscosplays/about Here is the chest armour to go with the helmet. As for the canisters on the back. I wouldnt waste fillament attempting to print those when you could…
New model, new armor! I'm going to keep doing what I do best and make the types of armor bits I would have loved to play with as a kid. I took the pauldrons from my Bastion/Rampart 13 and added them to the Carbon 13. It limits the range…
This model is compatible with the lego system.
I used the Toughtbuilt brand padded strap I found at Lowes with the lobster claw clasps on it. But I'm sure there are multiple other attachment options.
There is a 30% Off Discount for the models for all the DakkaDakka store Patrons! Check out this month's collection patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…
This model is compatible with the lego system.
An ultralight Everyday Carry (EDC) utility attachment designed to slide directly onto your backpack's shoulder straps, providing a dedicated, secure anchoring point for carabiners, keys, water bottles, or pouch clips. The design features…
This model is compatible with the lego system.
This model is compatible with the lego system.
When a puny little minigun just isn't enough. Fun fact: the original shoulder-mounted minigun was a very, VERY early prototype of what would later become the minigun in the Blaster Arms remake pack. I made most of the blaster arms with an…
This is an update to the v0.01 version. Updates include: - Trying to optimize everything for printing with the least amount of supports possible. - Separating the side panels from the main body so the screws have actual function, as well…
It's 103% scale of the original model because I have tolerance issues but if you don't just change the scale to 97%
This is a mod frame part for soozafone 's DUMMY 13(Beta) . This part is based on "frame hip-shoulder v3" part in DUMMY 13. DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Some people (including me)…
This model is compatible with the lego system.
This model is compatible with the lego system.
There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this month's release patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker If you're anything like me and you hate anything going to…
This model is compatible with the lego system.
This model is a quick-release lock plate designed for cameras (or any other compatible equipment). It consists of a support plate that securely snaps into its base and requires the push of a button to be released. The base can be mounted…
This is designed for the Chimera 7 Pro V2, however it “may” fit the Chimera 7 Pro or Chimera 7 (no guarantees). TPU not recommended since it is a snap fit, and harder plastics are better at deflecting the prop without breaking it anyways.…
![Bulky Shoulder Armor + Clip for Attachments [Unpolished]](https://media.printables.com/media/prints/894836/images/6928491_7c419462-5c7c-43cf-91ee-5a081637d2c3_3d6ae363-f47c-4261-a85d-413b03bba5c4/armorcutup.png)
