37 605 modeli
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- Update log January 2024: Version 2 of the base has been uploaded, see below for more info SIZE The model will fit on Prusa Mini+ (180x180). Feel free to size it up or down as you…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print each part, see print instructions. Cut away the wall from the beard with a knife. Assemble the parts and then use a hair dryer/hot air gun to slowly heat up the beard while you use a hand to form it (use lowest setting). It's also…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Christmas Tree 4-in-1 We present our latest Christmas decoration – Christmas Tree 4-in-1 ! This model includes four different variants that you can print in various modes to create a unique atmosphere in your home. Tree Variants 1. Solid…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
You can print it instantly from the included .gcode files or customize your own print. In the attached .3mf file (1mm thickness) the seam is painted in the back of the figure to not affect the appearance and at the same time to be as less…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Print your own valve caps for your car and bike. This cap fits a standard Schrader valve. These caps have more threads than normal, so they stick better, and you don't loose them. -Print with 0.1mm layer height for good detail -Add a 10mm…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Edit 27. 12. 2023 Now you can also print a napkin holder with these gnomes! https://www.printables.com/cs/model/695300-napnik-holder-with-gnome Edit 10. 12. 2023 Thank you so much for all the downloads! I was so happy for the first 100 in…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
Wydruk około 4,49 €–5,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
When I loaded the file in Prusa Slicer it detected ~1800 errors. So I ran the file through Netfab to fix those. Nothing fancy but it might save someone the 5 mins it takes to run it through Netfab. Sunset owns the rights to this.
Wydruk około 8,53 €–10,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Multiple baubles to christmas tree (35 variants and sizes). Prepared for printing in vase/spiral mode - I recommended minimal 0,4 or 0,5 nozzle and set extrusion line width more than 100%. In some parts of baubles (overhangs) i use layer…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Christmas Village from Five Nights Included GCode works great on a Prusa Mini using Eryone white PLA Original Model Drawing also Available.
Wydruk około 19,68 €–24,05 € nettoWstępna wycena jednego wariantu
Update: I've uploaded new PrusaSlicer 3MF and GCODE files (look for “New settings” in the file names). These keep the hot end at 190C and use other techniques to cool the filament, so it's less likely to clog. I made a few other changes,…
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Christmas bauble display stand. UPDATE - I have redesigned the tree and base so that they slot together better Easy and quick to print with no supports Pictured with a 6cm bauble but can easily be scaled up or down. Let me know in the…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This is actually my wife's idea and I made it for her. She needed toilet paper holder. Looks fantastic fully loaded by white rolls. Happy printing! Print instructions This design fit on typical MK3 heat bed 25x21cm. Body is made with two…
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's very simple. The height of the ball is 10 cm, width 6.3 cm and thickness 0.18 cm. Before printing, see the printing instructions. The model can be proportionally changed or enlarged. Printing instructions The orientation of the…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
I printed this with the color setup for my Covid mask straps so white and black are in positions 4 and 5 respectively. I split the print vertically using the Multi-Material 2S but it could be printed by swapping filaments at the layer…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Print 0.16mm, might need supports or maximise cooling fan.
Wydruk około 5,57 €–6,80 € nettoWstępna wycena jednego wariantu
I specialize in creating custom lithophanes, enjoy! 100% infill Supports drawn on only around bottom of bell Using Eryone White PLA with 0.2 quality settings
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
Frohe Ostern Schriftzug
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
This is a multimaterial remix of Articulated Christmas Toys by bq3D ( https://www.thingiverse.com/thing:1168292 ) These are relatively easy prints that print in place without support. If your first layer adhesion is a little low, a brim…
Wydruk około 18,45 €–22,55 € nettoWstępna wycena jednego wariantu
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lego christmas balls 3 sizes
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
A gift box for Christmas goodies. Have a gift to give from your 3D printer this holiday season...or anytime during the year. Fill it with goodies. Should scale to any size you want. ***UPDATED: Added GC_Top & GC_Bottom to fit your…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…
Wydruk około 13,77 €–16,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
I recently made a restroom sign for my grandpa's pool bathroom. This is another variation that's a little more cheeky. Remember we don't care who you are, what you are, or what you do in the bathroom just wash your hands!
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
Customizable battery powered Christmas tree bauble. Featuring Snowman and illuminating Lamppost. Print instructions I've designed to bauble to use as little supports as possible. There are only 2 files that require supports: Top and…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is an ornament to hang on your Christmas Tree. It has inner rings that can spin and a small snowflake in the center that can also spin.
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Why: When Apple launched the M1 Mac mini, it brought serious performance improvements over the outgoing generation; however, the design remained unchanged and the majority of the parts were brought over from the 2018 Mac mini. With the…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE MUSHROOM MARIO BROS KEYCHAIN This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…
Wydruk około 12,97 €–15,86 € nettoWstępna wycena jednego wariantu
A stencil for christmas coffee How to use it To begin, hold the coffee stencil over the top of the cup of coffee or espresso. Using the small spoon or scoop, sprinkle a thin layer of ground cinnamon or other spices over the open areas of…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a shroud for the FRC main breaker that protects it from unintended contact. It is designed to be printed with no supports, and then directly threaded into by ¼-20 hardware. Printing this in a high visibility color (like bright…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
I've provided my PrusaSlicer 3MF file and GCODE for Prusa MK3S+ at 100%. It provides a nice balance of print quality, speed and weight. If you want even better quality, you may want to increase the supports or use 2 perimeters everywhere.…
Wydruk około 4,19 €–5,13 € nettoWstępna wycena jednego wariantu
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Radiuslehre für Außen- und Innenradius 1-25mm Es ist ein Remix von "@mibla" aber ich habe sämtliche Maße verändert. Geändert/hinzugefügt wurde: von M5 Senkkopfschraube auf M4 Zylinderschraube 30mm mit passender Mutter Innenradius 21-25mm…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Wydruk około 4,58 €–5,60 € nettoWstępna wycena jednego wariantu
UPDATE: I made a v3 which is a variation of the short version, that is more practical as a bookmark. --- Bookmark created from the Hand of the King brooch made by HasiGH on Thingiverse (thing:630577) There was similar bookmark on…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
knife for throwning i think that slim look better
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
Thanks a lot to @Noname_Engineer for that great GoPro tripod model. I was too lazy to go out to a hardware store and buy thread parts. And I also needed a trippod mount very quickly (stores were closed). Because of that I just added the…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Handy toilet & bathroom organizer for electric toothbrush and other needed items. Size is about 85mm x 144mm x 125mm (H x W x D).
Wydruk około 7,32 €–8,95 € nettoWstępna wycena jednego wariantu
English : Printed with the readable side laying on the print bed, in order to benefit from the good looking textured PEI sheet. Deutsch : Gedruckt mit der lesbaren Seite auf dem Druckbett liegend, um von dem gut aussehenden, texturierten…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
A Japanese shrine gate made for mothers day. Can be used as desk ornament or, if your like my mom, in the garden. Simple glue construction makes it an easy to make multi-color and print without supports. -Scalable -Easy to construct…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Easy to print, no support cave with window, for shrimps and small fish with window
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Little tree that can be used as a Christmas tree or also for model landscapes. The tree is in its normal size 45mm / 1,77 Inch tall. Print instructions Print the file in 0,2 mm layers. After printing the support-cone has to be removed.…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…
Wydruk około 7,63 €–9,33 € nettoWstępna wycena jednego wariantu
Here's a fun new Christmas ball that features alternating diamond patterns. The cover photo shows the same ornament photographed at two different angles. I printed it using a two color filament, so both the color and pattern shift as you…
Wydruk około 5,47 €–6,69 € nettoWstępna wycena jednego wariantu
Prusa empfiehlt die PINDA mit einer Kreditkarte einzustellen, was mir nicht so gefällt, da man mit der Düse an das Druckbrett fahren muss und diesen beschädigen könnte. warten bis gereinigte Düse abgekühlt ist. Drucker ausschalten.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Looks good with 1 or 5 levels. 5% infill is enough. Buy me a coffee
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
I have added color to Vlado Turek 's Chrismas ornament in order to print it on my MK3S/MMU2 using PLA: “Yellow-Green”, Red, White, Yellow and Black.
Wydruk około 10,20 €–12,47 € nettoWstępna wycena jednego wariantu
For those of us who can't paint, I remixed the ornament to a multi-color version. The 3MF is scaled up to be about a 3.5" ornament. I wanted a decent sized print to be shown with pride on our tree. As an added bonus, it makes it a little…
Wydruk około 15,22 €–18,60 € nettoWstępna wycena jednego wariantu
After a year, Christmas is coming again, so I made a new Christmas bell pattern to decorate your Christmas tree. The bell also has a heart, it is printed print-in-place. You can also scale it Christmas bells collection :…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
If your aquarium is overrun with Neocardina shrimp, here's a trap designed to catch them safely. Load it with an algae wafer, twist on the friction-fit lid and drop it in the fish tank. As printed in PETG with 20% infill, it sinks — no…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can edit text with free software Autodesk Fusion 360. To edit text download .RAR file and follow instructions in HOW-TO PDF. Personalized Christmas Card is suitable for C6 envelope 114x162mm. Tips: - Print STL file if you do not want…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Game of Thrones DireWolf Plaque An experiment with displacment on curved surfaces after remesh x10 octree. It was pretty wild displaced on a remeshed sphere. a bit too wild. BONUS: this was lost in the myriad of open projects I had…
Wydruk około 15,67 €–19,15 € nettoWstępna wycena jednego wariantu
This is not a joke! Where my family is from, for some reason we always have shrimp for every major celebration/get together/holiday/birthday. EVERY SINGLE TIME! But I like shrimp so I don't mind. I didn't start this til 3 hours before the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple holder for the Ikea Skadis system to organise thread reels
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…
Wydruk około 8,25 €–10,08 € nettoWstępna wycena jednego wariantu
Game of Thrones Night King Bust. (kind of looks like he is part of a “got milk” campaign)
Wydruk około 16,12 €–19,70 € nettoWstępna wycena jednego wariantu
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. There are…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
A geometric Christmas tree, printed in vase mode! Nice to have on your desk during the dark december month! By removing the bottom layer you can easily put an LED string in like shown on the pictures. The peak is printed separate. Also…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
The Puzzle Box V NIce easy to print Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how! This is updated fifth (and I hope final) version in my "Puzzle Box" series...Now even harder to…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Christmas ornament tree Print instructions PLA white infil 10% detail 0,2mm
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Today’s design continues the holiday theme with another Christmas ornament . This one has a more oval shape and features a spiral pattern made of individual open lines , giving it a see-through, airy look ✨. The ornament prints easily…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
***This project is still a WIP, but I have been able to successfully print multiple working versions of this model (and am currently using it on an MK3S+ to print more).*** Purpose: Create the simplest, one-piece replacement version of…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
its a star, but it doesn't shine. It hurts.
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can print this without support. I printed it on the XL but it should be fine on the MK4 or other printers as well. If you scale it down, it's also a nice Christmas ornament. If the hole is too big you can add a modifier in the slicer.…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena jednego wariantu
Wargame Building Terrain - Stand Alone Building - Group Three! Complex stand alone building with floor! Complex stand alone building with floor and slide in door! Complex stand alone building with No floor! The empires of the future won't…
Wydruk około 4,06 €–4,97 € nettoWstępna wycena jednego wariantu
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
Wydruk około 2,98 €–3,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to print Print instructions Rafts: Not needed Supports: Not needed
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
