2925 modeli
Model To prevent fast dry out of your started silicone/acrylic cartouche print this cap and screw it onto your cartouche. The cap has a conic inside to close the opening better as just a plain cap. Printing instructions I used PLA but…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Wydruk około 7,95 €–9,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Discription: This chibi-style Ghostface figure was custom-designed to blend playful proportions with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
Il SiliconeEdge Scraper è il raschietto pratico e resistente, progettato per rimuovere facilmente il silicone in eccesso da spigoli e angoli. Grazie alla sua punta a V di precisione , elimina il sigillante senza danneggiare le superfici,…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Cap for silicone cartridges or simlar, with S15x2.5 thread.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
New molds, much better: https://www.printables.com/model/1185152-new-better-crucible-molds-for-microwave-metal-melt There are 2 different size molds. I print them in PLA 20% infill. The Lid and inside cups should be printed @0.16 mm layer…
Wydruk około 15,10 €–18,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Source dragon of motion icon from Dragons Rising Season 2. Not intended to be used as a weapon. Blade should be printed in translucent red PETG with at least 3 walls and zero infill for best results. Please post a make if you make any of…
Wydruk około 6,82 €–8,33 € nettoWstępna wycena jednego wariantu
Bag clips with a print time of approx. 17 min each at 0.3 mm layer height. Clips are 15 mm thick and have a spiral cylinder as spring. Print settings PLA 0.4 mm nozzle 0.3 mm layer height 10% infill, 2 perimeters (optional) MMU 2 color…
Wydruk około 3,89 €–4,75 € nettoWstępna wycena jednego wariantu
Speaker icon to mark an object.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
These molds are for casting heat resistance silicone molds for softbait casting with plastisol injector. Example molds have been done with Bright Baits Red silicone Both molds have air vents to improve casting and centering pins for…
Wydruk około 6,31 €–7,71 € nettoWstępna wycena jednego wariantu
Remix molde Hotend Prusa mini para usar la silicona tipo K2 de Alta Temperatura. Masilla con más viscosidad que la del modelo original. y fácil de encontrar en Amazon a buen precio. Se recomienda imprimir a capa 0.1 y un 20% de relleno…
Wydruk około 3,59 €–4,39 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Silicone mold for making silicone tube heatbed thermistor
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
This is a moving spinnable version of the quest marker icon from the MMORPG ‘Runescape’ made by Jagex. Introduced in the quest ‘Ancient Awakening’, The new in-game spinning quest marker was far easier to see and use. Reddit users were…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
This 3D model captures the essence of the iconic Tupperware tumbler in a keychain-sized collectable. Designed to perfect scale, the model features the tumbler's signature details: Sleek, rounded body: The familiar silhouette of the…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
This kangaroo figurine features a strong stance and long tail, capturing the essence of this unique marsupial. Optionally includes a baby joey in the pouch. Printing : Compatible with both FDM and resin printers Supports : Recommended…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Took the concept of jgremlin's design and remixed it to better fit the dimensions of my wrenches. Metric Version.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Took the concept of jgremlin's design and remixed so they would fit my wrenches. The largest 4 of my wrenches didn't fit in his model, so I re-did the pockets by measuring each wrench and applying the same tolerances on each. Fitment may…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
happy and sad smiley face icone magnet for Fridge
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation. This type of grid…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
Simple multipart kiss emoticon, easy to print no supports. Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's magic! No not really. But still very cool. In this example I show you how I create a multi-colored "badge" from an SVG icon. So fast and easy! With the color print function in the Prusa Slicer you can print with multiple colors even…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Keyhole Pegboard holder for my wolfcraft silicone gun. The Pegboard-spacing is 45mm. Prints without supports.
Wydruk około 1,49 €–1,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very simple wall mount for the remote AC200 Meliconi. Here is the remote: https://amzn.eu/d/5c9Hx9s I never found one for this model of remote, and I create this with 2 holes for M4 screws.
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been muddling over a way to use thermochromic filament for something other than just adding “wow!" factor to a print. Filaments used: Overture Cement Gray PLA Atomic Filament Perfect Yellow PLA Capricorn Tri-Color Thermochromic Lava…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
I created this lid for the center where I work. It had deteriorated by the pressure working. I took as a reference one in good condition. I recommend printing at layer height 0.15 or lower, since the thread pitch must be very sharp even…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This is a mold for 7 Silicone feet that mount under the grates on a Viking Stove. They match the originals exactly. It is very easy to pour the silicone into the 2 part mold and make as many replacements as you want. Happy Printing. Video…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
J'ai donc souhaité avoir des connecteurs magnétiques sur le modèle train de Noël icône 10361 qui en était malheureusement dépourvu. J'ai fait un modèle simple, efficace, et rapide à imprimer. L'impression s'effectue avec un remplissage de…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
5° angled diammeter for head 25mm for better performance should be inserted screws M4x30mm designed 2 dimmensional holes for glue by silicone to tile
Wydruk około 2,44 €–2,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shagaru Magala – Icône 3D STL pour impression 3D Apportez la puissance et l’aura mystique du légendaire dragon ancien Shagaru Magala dans votre collection avec ce modèle 3D détaillé, inspiré de l’univers de Monster Hunter . Cette icône 3D…
Wydruk około 6,78 €–8,29 € nettoWstępna wycena jednego wariantu
Important announcement: I released version 2 of the multiconnect system for multiboard . This version is fully compatible , but also incorporates some handling and versatility improvements. I recommend to always print the new versions.…
Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…
Designed to fit universally on silicone sealant cartridges with an S15 × 2.5 thread , it is a simple and reusable solution for storing partially used cartridges. Features Helps prevent silicone from curing between uses Universal fit for…
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…
utile utensile per facilitare la stesura del silicone,si consiglia stampa in TPU
This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…
In Prusaslicer set Vertical sheel perimeter to 5 to get more powerfull tool. Print orientation
I printed mine in PLA, no support and in 0.20 mm
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
Do you need a tool to smooth silicone around pipes to seal any leaks? Or after installing a sanitary fixture? This is the tool you were looking for. This tool features a handle for a comfortable grip and various spatulas with the main…
Description: Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle…
Ich hasse es wenn die kurz benutze Silikon Kartusche beim nächsten Mal ausgetrocknet ist... Somit hier ein Verschluss. Damit es optimal dichtet einfach ein Gummiband vorab auf das Gewinde geben (muss aber nicht sein). Der Verschluss ist…
This strange rolling riddle will make you think twice about how things roll! In a straight line? No! It rolls in an irregular pattern like pictured below. It gives you the illusion of rolling normally, then it fakes you out! It works best…
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. This is version 2…
Newer model here - gantry mounted version including nozzle stop to prevent leakage when parked: https://www.printables.com/model/882364-new-version-adjustable-gantry-mounted-nozzle-seal This is a remix of the great design by FunFunBoy…
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. For new models I…
Silione finishing tool, set of 2. Get those perfect finish silicone corners. Simple tool set, easy print. print 0.2 layer 25% infill material: any [original are made in silicone], but i´ve been using petg and pla, and it works great - if…
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…
Add flexibility to your nozzle cleaner,
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Some time ago I found a silicon tube stopper on thingiverse - but it didn't fit tubes sold here (those are 16mm OD of the screw) So I made a new one - but it didn't seal well And then I designed this model, it has space at the bottom (or…
Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…
🎯 Silicon PRO 3in1 è lo strumento definitivo per ogni amante del fai-da-te e per i professionisti della sigillatura! Con il suo design ergonomico a freccia e le tre punte intercambiabili, questo accessorio rende ogni lavoro di silicone…
Ergonomic silicone scraper Sometimes I need to replace the silicone around the bathtub, so I used my experience in 3D modeling and created this silicone scraper. The scraper can also be used on the printing plate as a bed scraper !! The…
Stand for MacBook Pro 2021 14 / 16 (M1 Pro, Max ) Upon looking at the sizes for the M2 MacBook Pros, this stand should still work, though I don't have a computer to test it. Printed in PLA 0.2mm Layer height 10% cubic infill No supports…
Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…
Fun and simple cat toy. Either the cat can play with it alone or you play with her. (makes even more fun). The toy rolls through its shape very unevenly which stimulates the cat even more to play. Works with my cat really great. The toy…
They can be assembled with binder clips to form different sizes of rectangle and different sizes of squares by different combinations for different size molds. Can be stacked to make taller mold.
The Silicon Spacer mod is intended to help flatten/level the print bed by enabling you to vary the depth of each bed mounted screw in an effort to compensate for variations in manufacturing tolerances. Silicon Spacers found on Amazon…
91 Icon Keycaps mostly based on fontawesome Switch Type: Cherry MX Sources: all brand icons are taken from the website of the respective website (example OBS, firefox) OR from fontawesome free brand font. Most icons are from Fontawesome…
These are some keychains made to look like the default icons from the game Geometry Dash by RobTop. I printed these with PLA, but other materials should work. You will need to add a color change while printing to make the outline and…
Printed with PLA. 0.2 layers. 3-4 walls. 30-99% infill. No supports. Top/Bottom pattern: Concentric Prints in 10-15 minutes.
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
This Silicone Tube/Cartridge Cap was born out of necessity when my brother asked for something to keep their silicone and sealant tubes from drying out during their construction project. The cap features rounded edges for a better grip…
I traced the icon in blender just for you guys! I was going to print an undertale heart logo thing and I found nothing, so I made it myself.
Noticed there was a lack of Halo skull files around, so I decided to make one and share it. I'll be adding campaign symbol cut-outs upon request. Thanks to the Halo Archive for extracting and providing the model this skull was based off.…
Simple replacement/disposable nozzle for silicone sealer tubes
Generic connectors to hang your bins/shelves or anything else to your honeycomb storage wall. The connector is pretty generic and allows you to attach anything you want. Why use this connector: The connector is universally usable and…
Regular size caulking nozzle (10cm) Remixed from an original design by Lannix 3D https://www.printables.com/model/150759-extended-caulking-nozzle
This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…
I modified the original Decontaminator to use with the Bambulab A1 mini silicon brush, more reliable and robust than the brass brushes. I also modified the bucket to be smaller on the inner side to mount different Wago mounts. All you…
Bring the thrill of Formula 1 to your home or office with this meticulously designed 3D printed F1 coaster set. Crafted for motorsport fans and lovers of sleek design, this set features six unique coasters, each depicting the outline of…
A WC door hanger featuring the charming character from the iconic cartoon "La Linea (Balum Balum)". The minimalist drawing with its distinctive single-line style depicts the character gesturing humorously, suggesting someone is using the…
I have been organizing all my hardware using GridFinity and wanted to label them. I couldn't find a good set of icons to include with my bins to categorize them that were simple enough to print from a low DPI label maker. This will be an…
Update: I have changed the CC license of my models because of the lack of clarity around AI use. If you want to re-mix, reuse, rewhatever my model, just ask.. HeroQuest Combat Dice (16mm) with Classic Icons Description: The best thing…
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7543982571361815830 ℹ Discription: This chibi-style Pumpkinface figure was custom-designed to blend playful proportions…
I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…
Supplement tool for this: https://forum.prusaprinters.org/forum/user-mods-octoprint-enclosures-nozzles/prusa-mini-silicone-bed-leveling-mod/ When levelling hotbed in this mod, you are asked to tighten screws 426°, -32°, 168° or any other…
Your standard paper towel holder that you can mount vertically on your favorite vertical storage system – Multiboard or Honeycomb I specifically used Multiboard, but with MultiConnect system, these can be mounted on the storage system of…
Summary Silicone/Putty cap for keeping the putty usable for longer period of time. Tolerances are tunned for my Prusa Mini. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand: Sunlu Filament color: Silver…
Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…
Born out of necessity, I present to you all the Anti-Tilt MultiConnect! Snap it into your Multiboard (square side down) and enjoy attaching small MultiConnect parts without needing two MultiConnectors to keep the item from rotating! 20%…
This improved Multiconnect Snap is easy to print, holds a firm grip on, and is easy to remove when you want to.
Summary Silicone/Putty cap that I am using to store nozzle and keep the putty usable for longer period of time. Tolerances are tunned for my Prusa Mini. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand:…
4 Corner : 90° - 16 mm - 10 mm - Radius 16 mm
Call of Duty Black Ops 6 - Cerberus Icon
Silicone caulking nozzle, ribbed for your pleasure, makes (un)screwing fun!
This is a very minor remix of the Transformer Decepticon logo by MrSnoWie. https://www.thingiverse.com/thing:1131797 Using Meshmixer, I removed a small hole towards the bottom of the back of the original model and remeshed the back. I…
Helicone variation I created. Super satisfying spinning toy. Pretty easy to print, has no support, infill doesn't matter, 24 spinners
I took the classic spawn pad and cleaned it up a bit by removing the big bottom part beneath the spawn logo, making it more streamlined and cosplay-friendly. It still has that iconic spawn look but is simpler and perfect for fans of Two…
