Wyniki wyszukiwania: ifo

Sortowanie

1014 modeli

P
PrintablesTinuvion

Heating System for VW T6.1 California Ocean

So my dad asked me to design something to bring the hot air from the bottom heating exhaust of his California Ocean to the pop-top roof bed more efficiently. While I found several heating adapters for the bottom exhaust where you can…

Pobrania
1177
Polubienia
70
Ocena
5
P
Printables3Dprintfun

Ocarina Of Time Stand With Triforce + Music For Ocarina

I made the Ocarina Of Time by: Zuza awhile ago and it came with a stand, but I didn't print it right away because I wasn't sure if I would get into playing it. I started playing it quite a bit and thought it was time to print the stand. I…

Pobrania
407
Polubienia
121
Ocena
5
P
Printablesarnevollstedt

Warmluftauslass Standheizung VW California T5/T6 für bessere Luftverteilung

Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…

Pobrania
249
Polubienia
22
Ocena
0
P
PrintablesWanderWardr

FIFO Can Shelf XL

A First-In-First-Out dispenser for food cans. Snaps together for hardware-free assembly. The modular design can be expanded to be as large and as small as needed. Please read the instructions before printing, as this design is quite large…

Pobrania
222
Polubienia
48
Ocena
5
P
PrintablesDavid

VW california t6.1 shelf holder

Print with supports sideways, PLA was tested and works nicely in Cali.

Pobrania
201
Polubienia
9
Ocena
0
P
Printableslytta

Triforce Bobby Pin Clip

I thought I'd use a simple triforce design to test this method for making a print that is easy to clip on with a bobby pin. I ended up putting in a bit of extra attention to making the hole less visible so it doesn't break up the triforce…

Pobrania
90
Polubienia
55
Ocena
0
P
PrintablesJames Breger

Bifold door pin roller

This is a bifold door upper pin roller. None of the other model i found online were the right size apparently mine was smaller. I printed it in PLA at 100% infill at 0.1 resolution with organic supports "probably not needed but didnt…

Pobrania
58
Polubienia
8
Ocena
0
P
Printableseap6rda

Holly leaf / Feuille de houx / Foglia di agrifoglio - Decoration for Christmas presents ribbons

Christmas Holly Leaf / Leaves – Decoration for present wrapping ribbons Feuille de houx - Decoration pour les cadeaux de Noel. Foglia di agrifoglio - Decorazioni dei pacchi regalo di Natale. Design: Modeled in FreeCAD from a sketch on…

Pobrania
57
Polubienia
11
Ocena
0
P
PrintablesIgnacio Vidal

Tap handler as a Toad Mario /llave de canilla - grifo con forma de Toad

This remix was based on the design of Waikikiprod He made an excelet work. So I used this incredible Toad and adapt to my gardens tap. This is a very simple, economic, and common, pastic tap. I've designer the inset of the tap in Fusion…

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesJosef Andrysek

Yogurt FIFO fridge container

When you are putting new yogurts into the fridge, you usually want to put them behind all already stored yogurts, so that the older ones are consumed first. This is more important in last days, when you try to minimise the shopping and…

Pobrania
37
Polubienia
13
Ocena
0
P
PrintablesGermen

redukce na trubku na pračkový sifon

vnější pruměr 40mm vnitřní 30mm

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesJoris

Daft Punk "STARBOY California" Numberplate

This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…

Pobrania
22
Polubienia
8
Ocena
0
P
PrintablesMakePro

Wilfa Svart Uniform - under-grinder coffee coaster

This coaster is designed to catch any stray grounds that fall from your coffee grinder, keeping your countertop neat and easy to clean. It includes seven holes for attaching standard furniture bumpers (9mm - example ) or slip-resistant…

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesGPHerb

Ikea Antifoni Lampshade Mounting - Ikea-Antifoni Lampenschirmbefestigung

Meine Lampe ist mit einer 4W LED in einem G9 Sockel bestückt. My lamp is equipped with a 4W LED in a G9 base. Halogenleuchtmittel sind nicht geeignet! Halogen bulbs are not suitable!

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesRoger Thomas

Track holder for Philips Hue Perifo track lighting

We live in an old house, built in 1675. Our roof timbers mean that our bedroom ceiling isn't anywhere near flat. We have a (very) large (and entirely unnecessary) Philips Hue Perifo installation on the ceiling, and there's a gap below one…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesDavid Moore

Mad Caddies - California ska band 3D logo

Mad Caddies - California ska band 3D logo with layer/colour changes built in. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. NOTE: The corner squares, shown in the 3D preview are NOT…

Pobrania
2
Polubienia
0
Ocena
0
P
Printablesfns720

FIFO battery dispensers for AA/AAA/18650 batteries

I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…

Pobrania
4242
Polubienia
559
Ocena
4,99
P
PrintablesZach

Triforce Bookmark

A detailed Legend of Zelda bookmark, designed to be super thin and fast printing. No page damage, no hassle, just a cool design :) Test printed using an FDM printer. As I'm going for very thin layers, including the first layer, you'll…

Pobrania
3973
Polubienia
814
Ocena
4,81
P
PrintablesIanHoolihan

Hyrule Triforce Wingcrest - Legend of Zelda

Wall-mounted Hylian Wingcrest from the Legend of Zelda series. This was modeled by me based on a 2D image of the crest. The model includes a slot on the back so that it can be hung on a wall by a single nail.

Pobrania
2038
Polubienia
387
Ocena
5
P
PrintablesDalsgaard

Food can FIFO dispenser

You need to rotate your food cans (use the old ones first). This dispenser lest you always grab the oldest one first and top your stock up from the front. It does not need to be a prepper thing, because in general you are better off if…

Pobrania
1624
Polubienia
355
Ocena
4,8
P
Printableskuchar

Stackable FIFO can storage

Stackable FIFO can storage. Designed to hold 8 cans ~75 x 115 mm (3" x 4.5"). Two, probably three, can be stacked on top of each other. Printing No supports. I've printed 3 perimeters, 15% infill. Print each one of the walls on the back,…

Pobrania
1562
Polubienia
728
Ocena
4,85

Texture Rolling Pin - Uniform Brick Pattern

Texture rolling pin for clays and epoxies. Can be used to create a pattern that's perfect for brick walls or floors. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking, wet the…

Pobrania
1549
Polubienia
389
Ocena
5
P
PrintablesAdam L

Legend of Zelda : Hyrrule / Triforce Crest

Please download the original author's model here: https://www.printables.com/model/321247-hyrule-triforce-wingcrest-legend-of-zelda , which I had honestly forgotten that I had not made. My deepest apologies to the original author, Ian.…

Pobrania
1396
Polubienia
196
Ocena
5
P
PrintablesFlasheek

Fat Shot X - Multiformat (6x17, 6x14, 6x12, 6x9 and 6x6) 120 type film camera

Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…

Pobrania
1360
Polubienia
228
Ocena
5
P
Printablespeterkrull

Overhang uniformity benchmark

Got a new print cooling fan, new filament or just curious about your printers overhang performance? This thing is the perfect benchmark to test just that. The part comes in multiple varieties depending on your needs and how thorough you…

Pobrania
1216
Polubienia
72
Ocena
4,9
P
Printablespavol.n

Exhaust manifold

Just slice and print. No supports needed.

Pobrania
1135
Polubienia
63
Ocena
5
P
PrintablesAG3D

GALLIFORMES 13

Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .15 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot Compensation 0.15mm Supports None Additional Settings (Optional) Print External…

Pobrania
1086
Polubienia
391
Ocena
4,75
P
Printablesmkingery

FIFO AA Battery Dispenser

Inspired by other prints here, but decided to roll my own. This can hold 12 AA batteries in series to help load balance rechargeable batteries.

Pobrania
1055
Polubienia
165
Ocena
4,96
P
PrintablesKyleMc

Cruciform Key - Mission Impossible Dead Reckoning

- The Cruciform Key - Added a version of the keys cut in half for printing flat. *EDIT* Update 20/08/23 Changed the model to reflect screen accuracy based on new images!

Pobrania
1048
Polubienia
73
Ocena
4,67
P
PrintablesMCdeltaT

Triforce

Just a simple Triforce. Because who doesn't want a Triforce??? Category: 2D Art

Pobrania
1021
Polubienia
49
Ocena
5

FIFO Can Storage Dispenser

Remodeled this can holder from scratch to make a few key changes to the parent model: Model now nests so two halves of it can be printed on a single MK3s build plate, meaning you only need two print jobs to complete the unit, not 4.…

Pobrania
922
Polubienia
209
Ocena
4,86
P
Printablesmkingery

FIFO AAA Battery Dispenser

Inspired by other prints here, but decided to roll my own. This can hold around 16ish batteries in series to help load balance rechargeables.

Pobrania
865
Polubienia
122
Ocena
4,86
P
PrintablesMauro Guastalli

FIFO Cans Storage

FIFO Can Storage, designed for the IKEA IVAR 30 cm series, but compatible with any shelf at least 240 mm deep. Suitable for Ø75 mm cans. For assembly, cut 5 pieces from a Ø10 mm wooden dowel. Each piece should be 1–2 mm longer than the…

Pobrania
817
Polubienia
782
Ocena
5
P
PrintablesBuildX

#0047 [Improved] AAA and AA Battery Dispenser [FIFO]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [UPDATED Dec 21, 2023] updated the battery removal area as @Runboy suggested, so…

Pobrania
742
Polubienia
110
Ocena
5
P
PrintablesAnson Liu

California, USA (CA) Topographic Map with Hydrographic Features

California, USA (CA) Topographic Relief Map with Rivers and Coastal Waters California, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…

Pobrania
705
Polubienia
121
Ocena
5
P
Printablesmageb

Rubber (TPU) Feet for the Tefifon (or other uses)

Updates June 6, 2021: Improved the slicing options to result in softer feet Added a much larger version of the feet for increased dampening Description I designed these feet as a 1:1 replacement for the original feet on the Tefi KC-1 Ra.…

Pobrania
704
Polubienia
94
Ocena
5

Volkswagen california van 2D wallart

A silhouette of a california van for decoration

Pobrania
702
Polubienia
159
Ocena
5
P
PrintablesPJ

Elegoo Centauri Carbon Fan Manifold, Muffler/Silencer and Ducting Adapter

A set of ducting pieces for the Elegoo Centauri Carbon. Allows the silencing of fans and allows connection of ducting for external venting. Pieces are pushfit. Muffler drops case fan sound level by up to 10dB at source. Includes; manifold…

Pobrania
692
Polubienia
157
Ocena
4
P
Printablesnebkor

Topographic California

20% infill was more than enough; 10% is probably enough. I made the model to be carved with a CNC mill out of wood, and printed it out as a prototype.

Pobrania
672
Polubienia
53
Ocena
5
P
PrintablesHarry

Grid for VW T6 California "Beach" Refrigerator

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Pobrania
620
Polubienia
39
Ocena
5
P
PrintablesMolitoris

FIFO Can Shelf

The model consists of - 1x left wall - 1x right wall - 3x connecting rods Dimensions can height: 110 mm - 115 mm diameter: 74mm Printing information - Printed in PLA - No supports are needed. - The left and right walls fill the entire…

Pobrania
598
Polubienia
134
Ocena
4,67
P
Printablesalyssa cassity

Triforce Keychain(Legend of Zelda)

Wanted a new keychain after my old one broke. This can be printed in solid colors or you can do a color change halfway through the print. both printed on a single nozzle printer.

Pobrania
586
Polubienia
93
Ocena
5
P
Printablesm00nd0gg

GTFO - Get The Fog Out! Antifog Goggle Blower

This is a strap mounted blower to keep the fog out of a pair of airsoft goggles. Dissatisfied with my ExFog unit, I decided to build a small run of an improved design. My main complaints with the ExFog unit I bought were it was too…

Pobrania
559
Polubienia
125
Ocena
5

Dual 5015 to CPAP - Manifold

Had a hard time finding an adapter or manifold to use 5015 fans in conjunction with 19mm CPAP tubing for a remote part cooling setup. The few I found wouldn't work with how I have my gantry set up, so I went ahead and modeled this one. So…

Pobrania
550
Polubienia
123
Ocena
5

Work Holding with Flushing Manifolds | Electrical Discharge Machining | Gridfinity

Purpose This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place. Side Flushing…

Pobrania
547
Polubienia
40
Ocena
0
P
Printablesmabapro08

Satisfactory Power Slug (Very high poly & Manifold)

DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…

Pobrania
545
Polubienia
85
Ocena
5
P
PrintablesCurtisMarauder

Miraculous - Rena Rouge/Multifox Flute

This model is designed to print in four pieces on a decent-sized printer. The pieces have been sized to fit tight without any sanding, and gluing is optional. EDIT: I finally got around to printing the thing, and it ended up way bigger…

Pobrania
518
Polubienia
50
Ocena
5
P
PrintablesTinker Labs

Bifold Door Child Lock

Children are amazing, and they get into everything! This is a childproof lock for Bifold Doors commonly used in closets and pantries. Just slide the out of the way along the top of the doors to allow you to open them, and slide it back…

Pobrania
517
Polubienia
63
Ocena
5
P
Printableskeita99
Pobrania
507
Polubienia
45
Ocena
0
P
Printables3DMax

SemiFOX

Tools you need: sharp knife and sandpaper to clean the prints from strings. CA glue 2mm drill Screwdriver Material and settings: I reccomend LW-PLA 1 perimeter 2 bottom and top layers 6% gyroid infill The hinges print with TPU. Only one…

Pobrania
500
Polubienia
93
Ocena
0
P
Printablescookie_bucket

FIFO Can dispenser for cans (Ø~99mm H~119mm 1kg 850ml 30 oz.)

Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max). The files provided are only for the left side and need to be mirrored in the slicer for the other side. Print settings: Infill=15% gyroid /Layer…

Pobrania
494
Polubienia
334
Ocena
5
P
PrintablesWing-Art

VW California T5/T6 Kitchen sink strainer

Sink strainer for VW California T5/T6 This is a remix of the Kitchen sink basket strainer from LoboCNC. I've reconstruct it from scratch to fit to the VW California T5/T6 kitchen. Followed these print instructions: The trick to printing…

Pobrania
483
Polubienia
60
Ocena
5
P
Printableskenweblab

Zelda Triforce Cookie Cutter

A Legend of Zelda Triforce Cookie Cutter. Have fun! "The Triforce […] is a fictional divine artifact from Nintendo's The Legend of Zelda series of video games. Referred to as "The Golden Power" in ancient Hylian literature, it represents…

Pobrania
475
Polubienia
122
Ocena
4,67
P
PrintablesLian Aarts

VW California fill tube

Tube for filling Volkswagen T5 water reservoir. Flat side for easy storage and printing. It might fit other models but not yet tested. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25%…

Pobrania
467
Polubienia
39
Ocena
5
P
PrintablesRocketDex

Master Sword Triforce Stand - DUMMY 13

Introducing stand for the Master Sword, incorporating a Triforce motif. This model remixes the DUMMY 13 Master Sword, focusing on functionality and aesthetic enhancement. The stand is engineered for stability and durability. Ideal for…

Pobrania
467
Polubienia
210
Ocena
5
P
PrintablesAnthony

Spatule Multifonction pour Imprimante 3D - Avec logo Elegoo

Cette spatule spécialement conçue est l'accessoire indispensable pour tout utilisateur d'imprimante 3D. Elle vous permet de retirer délicatement et efficacement les objets imprimés du plateau, minimisant ainsi les risques d'endommagement.…

Pobrania
462
Polubienia
39
Ocena
4,5
P
Printablesadrianvm

Wave FIFO Battery Holder

A stylish battery holder for AA, AAA, or 18650 batteries that is first-in first-out. This is a parameterized OpenSCAD model. If you want to do AAAA or C cells, you should be able to measure the batteries and change the parameters in the…

Pobrania
441
Polubienia
102
Ocena
4,94
P
PrintablesPYC3D.ES

TRIFORCE LOGO THE LEGEND OF ZELDA KEYRING

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE TRIFORCE LOGO THE LEGEND OF ZELDA KEYRING Embrace the power of Hyrule with the 'Triforce Logo The Legend of Zelda Keyring'. This elegant 3D model features the iconic Triforce symbol,…

Pobrania
438
Polubienia
48
Ocena
5
P
PrintablesLyl3

Triforce Earrings with Beveled Edges

Earrings in the shape of the Triforce artifact from The Legend of Zelda. Power, Wisdom, Courage! Print one for each ear! The earrings in the photo were printed with Noulei Silk Antique Gold, and the top surface was ironed with Cura. The…

Pobrania
433
Polubienia
164
Ocena
5
P
PrintablesBotany Chic

Police Officer Uniform Pen Holder - Detailed Bust (Easy Print)

Bring some order to your desk with this Police Uniform Pen Holder ! This detailed model reproduces an officer's bust, complete with tactical gear: badge, radio, pockets, and a utility belt with a holster. It is the perfect accessory to…

Pobrania
429
Polubienia
60
Ocena
5
P
Printablesnerdyviews

Legend of Zelda Triforce Coaster

I've never actually played a Legend of Zelda game in my life but I am aware of the significance of the Triforce symbol. So here's a Triforce coaster for you to print! Just change filament color above 2mm.

Pobrania
399
Polubienia
73
Ocena
5
P
Printablesptrandem

The Vault (a print-in-place trifold wallet)

The Vault Wallet is a design exploration of a 3d-printed trifold wallet. While it won't win any awards for minimalism, it does make a statement. It features two print-in-place hinges, individual card slots for 4 cards, and a general…

Pobrania
395
Polubienia
112
Ocena
4,67
P
PrintablesJ4N

VW California paper towel support

I wanted to have paper towel holder that slides in the slot on the side of the bed. Easy to insert, no tools required. You will need two side pieces( printed mine without top/bottom layer and kept just the hex infill) and two pieces for…

Pobrania
381
Polubienia
57
Ocena
5
P
Printablesmabapro08

Satisfactory Lizard Doggo (Very high poly & Fully Manifold)

DISCLAIMER: The original model was made for the game Satisfactory (I highly recommend btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…

Pobrania
359
Polubienia
45
Ocena
5
P
Printableskeithywhites

Legend of Zelda Master Sword (BOTW) (Full Scale) triforce insert

print out 6 of these and glue to the master blade.

Pobrania
359
Polubienia
69
Ocena
5
P
PrintablesBroden

Jimny JB74 Rear Window Antifog Cable Cover

Should be printed in ABS or ASA as otherwise PLA or PETG will warp in heat. Fits on with some double sided tape

Pobrania
358
Polubienia
22
Ocena
0
P
Printablesgeektoybox

Simple Triforce with Goddess Symbols (Zelda)

Simple Triforce with Goddess Symbols inspired by Zelda, double sided, prints flat. Fusion file included.

Pobrania
354
Polubienia
63
Ocena
5
P
PrintablesMaBaTaBa

VW T5/T6 California - Kitchen Hook

VW T5 / T6 California - Kitchen Hook 7.7.2018 - added 15mm width Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: No Resolution: 0.2mm Infill: 35% Category: Automotive

Pobrania
347
Polubienia
23
Ocena
5
P
PrintablesMaBaTaBa

VW T5/T6 California - DualKleiderHaken Handgriff Fahrer/Beifahrer

VW T5/T6 California - DualHaken Handgriff Fahrer Beifahrer Print Settings Printer: Multec Multirap M420 2Move Rafts: Yes Supports: No Resolution: 0.2mm Infill: 20% Filament: Multec PLA-HT Post-Printing ============= Um Kratzer am…

Pobrania
342
Polubienia
37
Ocena
5
P
PrintablesWummeke

VW California T5/T6 fridge open thingy

Since I use my California also as my daily driver, the fridge cannot stay open by it's gasspring. Not only will I get a heartattack when the lid slams shut (which will eventually happend during a trip). But it also puts to much stress on…

Pobrania
341
Polubienia
17
Ocena
5
P
PrintablesLongwing

Can organizer and dispenser for first in first out (FIFO) organization in pantries and cabinets

First-in-first-out can organizer and dispenser for efficient pantry storage of cans. Great for keeping your oldest canned goods up front to keep your stock rotating and fresh. I looked at a bunch of these, but the designs were all oddly…

Pobrania
340
Polubienia
77
Ocena
5
P
Printablesrebeltaz

FIFO Rolling Can Pantry Organizer

So, this is, to date, my largest and most complicated design/print yet! If you are like me and have cabinets full of canned goods - always be prepared! - you know what a hassle it is to keep those rotated so that the oldest cans can be…

Pobrania
331
Polubienia
117
Ocena
0
P
PrintablesRaphael

Hook for VW California Headrest

hook for gear mounted on the headrest

Pobrania
324
Polubienia
32
Ocena
5
P
PrintablesRaphael

Hook for VW California interior

hook for gear mounted inside the sleeping roof of the VW california

Pobrania
323
Polubienia
43
Ocena
5
P
PrintablesSmoothDragon

Zelda Triforce key

Prints great without support. Needed a triforce themed key for a costume. My other key designs.

Pobrania
318
Polubienia
102
Ocena
5
P
PrintablesMaBaTaBa

VW T5/T6 California - foldable cup holder (kitchen piping rail)

For use in the VW T5 / T6 California - foldable cup holder (kitchen piping rail). Assemble with M3 screws. Print Settings Printer: Multec Multirap M420 2Move Rafts: No Resolution: 0.2mm Infill: 15% Filament: Multec PLA-HT blue Category:…

Pobrania
317
Polubienia
41
Ocena
0
P
PrintablesFruntke

VW Grand California 600 Betttaschen Stauraumerweiterung

🛠 Stauraumerweiterung für VW Grand California 600 – Honeycomb-Design Diese passgenaue 3D-gedruckte Stauraumerweiterung wurde speziell für die Betttaschen im VW Grand California 600 entwickelt. An der Seitenwand nahe der Hecktüren befinden…

Pobrania
316
Polubienia
11
Ocena
5
P
PrintablesDaan Janssen

VW T5/T6 California hook

Prints without support. Use something relatively temperature resistant for anything in cars.

Pobrania
310
Polubienia
31
Ocena
5
P
PrintablesSteffen Hoppe

Fridge Grid for California Ocean (Kühlschrankgitter)

On the bottom of the fridge in the California Coast/Ocean there sometimes forms ice that will make your grocerys stick to the floor and or disassemble. This is one solution for this first world problem. Just print two of these (one…

Pobrania
310
Polubienia
22
Ocena
3,5
P
PrintablesKlaus Krämer

Einlegebodenhalter VW T5 California / Shelf Holder VW T5 California

Einlegebodenhalter für VW T5 California (runde Noppe an der Rückseite) / Shelf Holder for VW T5 California (round nub at the backside) Suche nach/ Search for “Einlegebodenhalter VW T5 California” in OnShape.

Pobrania
307
Polubienia
19
Ocena
4
P
PrintablesPSZTOL

Uniformation GKTwo Build Plate Drip Holder v 1.1 (remix for new firmware)

I've shortened the model a bit (so that the build plate can be placed on the edge of the vat, instead of putting it inside), and enlarged its height by around 4mm so that users with new FW won't have to do anything apart from installing…

Pobrania
293
Polubienia
20
Ocena
0
P
Printablesspm3x.com

VW T5, T6 California Cupboard / Deckenschrank / Deckenregal Version 2025

Der Schrankkorpus muss mit ABS gedruckt werden. Für die Front wird 3mm dickes Acrylglas benötigt. Jedes Frontelement wird mit 3 verdeckt angebrachten Scharnieren am Korpus befestigt und durch jeweils 2 Magnete verriegelt. Die 3 einzelnen…

Pobrania
291
Polubienia
37
Ocena
0
P
Printablesgabi123
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
290
Polubienia
66
Ocena
5
P
PrintablesChar

4 Can Side-Loading FIFO Storage

Overview: Easily restock cans without needing keep a very large stock of cans that a lot of the other dispensers expect. Side-loading for First In-First Out and to make it easier instead of needing to load from the back (which isn't…

Pobrania
287
Polubienia
115
Ocena
5
P
PrintablesMylerMaker3D

Cruciform Key - Mission Impossible 7: Dead Reckoning Part 1

Separate key and gem models now available, just download “ MI7CruciformKey_NoGems_WHITE ”, “ MI7CruciformKey_NoGems_WHITE ” & “ key gem ”.

Pobrania
279
Polubienia
25
Ocena
0
P
PrintablesRaphael

Hook for VW California C-Rail

Hook for the C-rail of the campervan

Pobrania
279
Polubienia
23
Ocena
5
P
Printablesmangojelly

12 Hole Ocarina With Zelda Triforce

Remixed Nimaid's untested "a014" fully rounded finger hole version and added a Triforce symbol. Still learning how to play, but as you can see in the video this version also has trouble with the high notes (C and D). Nevertheless, still a…

Pobrania
278
Polubienia
34
Ocena
0

Female in Uniform Figurine

Perfect for decoration or a trophy topper. This high-detail model may not survive being scaled down. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Pobrania
271
Polubienia
18
Ocena
0
P
Printablesneyth_makes

Triforce wall decoration

A model I made for the release of the anniversary of Zelda this year Check out my insta for more projects: @neyth_makes https://instagram.com/neyth\_makes Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…

Pobrania
271
Polubienia
53
Ocena
5
P
Printablesmosselini1

The legend of Zelda - Triforce - Gyro Pendant (fusion360)

A nice little pendant that can serve many purposes: necklace, keychain, decoration, … . Show your love for science and Zelda with this gadget that will certainly start conversations. Would you like to remix this model to for example…

Pobrania
265
Polubienia
66
Ocena
5
P
Printablescaptainfuture

VW California fridge insert

We're owners of a VW California T6. When you store tetra paks (orange juice, milk, other) at the bottom of the fridge, they have the tendency of getting wet and soggy due to water condensate. We saw commercial solutions which cost a small…

Pobrania
263
Polubienia
25
Ocena
5
P
PrintablesAcgames

Girl Whispering Uniform STL Model

Design Concept The "Girl Whispering Uniform" STL model draws inspiration from dynamic and stylish anime figures, featuring a character in a school uniform poised in an elegant pose. The model aims to capture fluidity in form and…

Pobrania
262
Polubienia
25
Ocena
0
P
PrintablesGregahertz

Parametric Sliding Bifold Door Lock

This simple sliding locking mechanism should be enough to keep pets and younger children from opening your bifold doors. Can optionally be printed with a handle on one side or both. OpenSCAD file attached should allow a decent range of…

Pobrania
261
Polubienia
22
Ocena
5
P
PrintablesMaBaTaBa

VW T5/T6 California - Interior Hook with fixation

Remix of 3005083 (see above)- Added fixation behind aluminium cover Better fixation of the hook while the top roof is open Print Settings Printer: Mutirap 420 2 Move Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Multec…

Pobrania
258
Polubienia
25
Ocena
5
P
PrintablesSeanPWilly

Bifold Wallet Template

This is a template for a traditional style leather bifold wallet. It is recommended to use 3-4oz vegetable tan leather for something like this. Will need to cut out the following quantities of each template from your leather to have…

Pobrania
254
Polubienia
40
Ocena
0
P
PrintablesDenver3D

Master Sword Triforce Stand

Loved Popandsicle's Master Sword design, but didn't see any horizontal display stands for that sword (or others) that I liked, so I thought I'd design a simple one that fits the Zelda theme! Simple design using 2 identical halves, and 2…

Pobrania
251
Polubienia
84
Ocena
5
P
PrintablesMarkus Eissler

xTool S1 40W ABLUFT KRÜMMER - Seitlicher Ausgang / xTool S1 40W EXHAUST MANIFOLD - Side Exit

Bester Abluftkrümmer für deinen S1 - Seitlicher Ausgang - AD=100mm. Update: Auf Wunsch hinzugefügt, Datei für den original xTool Schlauch, welcher aufgeschoben wird: "Seitlicher Ausgang_originalSchlauch_AD74mm.obj" Konstruiert in FreeCAD…

Pobrania
250
Polubienia
36
Ocena
5
P
Printablesmeeple

Exfog Antifog Super Low Profile Universal Adapter (Smith Boogie)

A low-profile solution for affixing antifog to protective goggles. I really like the super-low profile airsoft eye protection options (such as the smith optic boogie ventilators), but they all suffer from the same severe fogging issue.…

Pobrania
248
Polubienia
24
Ocena
0
P
Printablesmobiobi

Triforce Kite, PiP

This is modeled after SuFu's idea, https://www.thingiverse.com/thing:952737 but is one piece and fully 3d printed. Set your first layer to 0.1mm thick(mesh bed levelling is a big help at this layer height), 105-110% of your normal first…

Pobrania
247
Polubienia
88
Ocena
5
P
PrintablesRaphael

Hook for VW California awning

smal hook for the smal piping rail inside the awning. Fits a lamp or other stuff

Pobrania
239
Polubienia
25
Ocena
5