81 modeli
A simple lens hood for the 135mm f2,8 Soligor lens. There are multiple versions of this lens, this one is with a 55mm filter thread and Minolta MD mount. Print instructions PETG or similar material would be best. PLA is too brittle. I…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
8 Vigor bottles from BioShock Infinite
This project is designed to help you stay on track with your focus sessions, using a simple and intuitive interface via a rotary encoder and an OLED display. Whether you need to time focused work, breaks or other worthy pursuits, this…
Gidday Craig, this will suit big fellas like us ; ) Hope it works for you. Do check the sizing and as always. Please show off some some pics if you do take the challenge on, Cheers Jace A big thanks to the Pepcowboy whom originally…
This adapter plate is designed to mount a skr 1.3 controller board to the original mounting location of a trigorilla controller board and to maintain the original position as good as possible. The adpater board is designed for the…
ATTENTION! To ensure that the device sits correctly in the bracket, its rubber feet must be removed before mounting. This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With…
heavy work in progress my first time sculpting. Not the most print friendly model. sleeve and pants ends together with earlobes and chin needs supporting, the rest should be self supporting. and the scale is way off. I scaled it up 700%.…
This object is scanned human head as result of testing the Einstar 3D scanner. Scaled down to 25% and printed with tree (organic) supports. Uploaded for analysing purposes, but you are free to play with it and remix the object if you want…
Even though I re-designed it from scratch, this is pretty much a remix of Michelix's adapter found on Thingiverse https://www.thingiverse.com/thing:3629440 This adapter gives room to run cables underneath as well as add a right angle USB…
Yards spikes in a few different lengths for the Vigoro Edging Kit. The kits don't come with nearly enough spikes for complex shapes or areas where you need additional retention. Print in supplied orientation with 3 or 4 perimeters for…
Źródło oznaczyło ten model jako treść 18+.
These are stakes designed to be used with Vigoro no dig edging from Home Depot
This is a drop-in replacement enclosure for the original Vigor 167. The modem uses a single PCB, so the swap is quick and straightforward. Handle the PCB with care, there’s a high-voltage section with its own protective cover. make sure…
A sculpture dedicated to Marty Feldman, the iconic Igor from the fantastic film Young Frankenstein . Unforgettable.
Printed on Modified Creality Ender 3 All 3 parts in single stl file Use your slicers “split parts” function to divide them Made with onshape:…
Trigorilla Motherboard Replacement Bracket for SKR 1.3 / SKR 1.4 / MKS SGEN L / MKS GEN L V2.1 Boards w/ Cooling Fan Duct Part Counts: 1 Main Bracket 1 Cooling Fan Bracket 4 Spacer Pipes Needed Supplies: 2pcs 5010 Fan 4pcs M3x30 Screw…
This adapter will fit a LR1 / N / Lady 1,5V battery to R10 type, which is not produced anymore, commonly used in Unigor 3p, 4p, 4s and similar multimeters like H&B / Elima ELAVI 3, ELAVI 4 series. You will also need a M3x4 ISO7380 screw…
I'm going to CFG dressed up as igor in the earfquake music video. I needed this golden pin, so I made it. works great! I would highly recommend using adhesion for this, AND using as fine resolution as you can. I’d also love to see how…
Here is the Abigor model I made today (or rather Abigor in his armor), this is a fan model I made and Abigor is from a high level DND campaign called Chains of Asmodeus (available here:…
Template for Trigorilla Board. Made this to add a shelf to an enclosure that mine went into for another build. Included a plate as well if you just want to cover the bottom of the board. Print instructions Category: 3D Printer Parts
Grigori Efimovitch Raspoutine — Buste 🇫🇷 Description Ce buste représente Grigori Efimovitch Raspoutine dans une interprétation sculpturale classique limitée à la tête et au haut du torse, reposant sur un socle sobre et équilibré. Les…
Balay refrigerator handle / Asa frigorifico balay
shichigoro-shingo Inspired
This model requires finishing. I am a complete noob with blender and the backside is not perfectly flat. i reccomend to do a quick cleanup with a plane in blender if youre blender skills is more adueqate than mine. In every case i…
Soporte para huevos para la nevera.
I made a remix of this project: https://www.thingiverse.com/thing:1939819 I changed only 3 things: 1- The original uses 12mm m3 bolts and nuts. For this one you need 20mm m3 bolts. 2- Changed the base a little to allow more ventilation. I…
I came up with this design after taping spray cans to the blade on my Sawzall. I used PLA for the body and TPU for the strap. I didn't use any hardware but have holes.
A simple mounting bracket for the DrayTek Vigor165 VDSL-Modem. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Filament: OVERTURE PLA White (Weiß) Category: Tool…
A while back, I upgraded the networking setup in my loft, replacing the old Fritzbox with a Vigor router, OPNSense firewall, HPE Aruba switch, and a few OpenWRT access points. However, I kept the old Fritzbox as a backup. Recently, I…
ABS-CF 25% Infill gyroid Wall and Bottom 0,8mm planed for M3 Inserts
Bust – Igor Fiodorovitch Stravinsky This bust represents Igor Stravinsky, one of the most influential and revolutionary composers of the 20th century, whose work profoundly reshaped modern classical music. Best known for groundbreaking…
Vigorwasp model from Monster Hunter World. Credit to HitoriHime who posted their fan render (https://www.deviantart.com/hitorihime/art/Vigorwasp-for-the-Tobi-Kadachi-s-3D-model-777912930) . I used the render to generate a 3d model. Not…
Prusa recommends the Synco Super Lube (21030) for lubrication of the rods and axial bearings of all printers. There are a lot of models out there to fit on the tube, but the dosing of the grease with pressure on the tube is something…
FrigoRack 58/67 is a practical and modular solution for organizing cans and bottles in your fridge. Designed to support 67mm and 58mm can diameters without wobbling, it also accommodates some glass bottles. The modular design allows parts…
this is a 1500 mm sword from oot and in inches thats 5 feet its truly massive. also very impatical for any thing but a sick looking display makes you wonder how link lifts somthing so massive. have fun and happy printing
It's a lens adapter for a Soligor (Soligor Macro 70-220mm F3.5) lens and a Tamron (18-300mm F/3.5-6.3 Di III-A VC VXD) lens. First I tried it with the Tamron lens and expected it to work because of the macro ‘’ability'' , but in the end I…
These are the parts I used to install a Trigorilla board (from an Anycubic i3 Mega S) in to a Monoprice Maker Select V1 that originally comes with a Melzi board. It should also work on the V2, the Wanhao Duplicator i3, and the Cocoon…
I was in need of a simple way to mount my trigorilla board to my Hypercube 2020 extrusion so i made this. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Category: 3D Printer Parts
The frame can be printed without support. See pictutres. The part for the fan and airflow was made with a minimum of support. See the left picture of the slicer picture. The airduct covers the TMC2208's perfect. No need to caulk. NOTE: I…
Edit 9/8: One of the connectors on my TriGorilla mosfet melted and I replaced it with a smaller, cheaper version. It looks like there are two common styles, a 30A (similar to the original TriGorilla) and a smaller 25A which seems to be…
I found a broken fertilizer/seed spreader and wanted to fix it. The part from the pinion gear to the spinner plate had sheared off, revealing a hollow space inside the gear. Since the spinner plate uses a hex slot, I just needed a…
Print Settings Printer brand: Creality Printer: Ender 3 V3 SE Supports: Yes Resolution: 0,2 mm Infill: 30% Filament brand: Amolen Filament color: Cement Grey Filament material: PLA Printed: 233% Slicer: Cura 5.9
There are two revisions: With three M5x40 hex socket screws with square nuts. Preferred printing orientation in the red colored photo. With two M5x20 screws and two M5 threaded inserts. Preferred printing orientation in the green colored…
Needed a mount for my TriGorilla heating controller MOSFET that I could mount on 20mm t-slot rail for my OpenBuilds based printer. I drew this one up in Fusion 360. I printed mine with 20% infill and 3 shells. Requires four M3 x 16mm…
Replacement Foot for Vigor GK20 Keyboard that will stand at correct angle matching the original angle at which the foot rests.
držiak pre kefku MK na vyschnutie po umytí
Se rompió la pequeña escuadra que soporte el estante de la puerta de la nevera, hice uno en PLA, lo pegué con Locktite y hasta hoy.
Bracket to mount Trigorilla Mosfet in front of PSU in original Control Box Print instructions Category: 3D Printer Accessories Summary Bracket to mount Trigorilla Mosfet in front of PSU in original Control Box
Mango para congelador de frigorífico Fagor. Realizado en PLA
This case was created to cover the open end of the power supplies that come with most 3D printers (in this case the Flsun I3 20A PSU. It's also specifically designed to hold the Trigorilla Mosfet, and a fused switch. Dimensions: Exterior…
Printed without supports, it was a little messy underneath. However, it worked fine after being cleaned up with nippers.
To prevent button presses from dislodging the encoder, and avoid gluing. The blocky bottom fits between the 2 rows of pinouts of the microcontroller The smaller round top can push upwards onto the bottom of the rotary encoder PCB I used a…
Vigor Quest started as a small project by me, it is a game where you play as a team of heroes, against a battlemaster (4V1). The aim of the game is to get your heroes from the start point to the end, defeating the enemies on the way and…
A Hueforge of Igor but in Vinyl Style Only needs 2 colors
Charles-Maurice de Talleyrand-Périgord Bust Charles-Maurice de Talleyrand-Périgord was one of the most influential diplomats in French history. A bishop, statesman, diplomat, and political strategist, he successfully navigated the Ancien…
Same Rack, only with cooling! Fan to use: https://amzn.to/4gxnTwX
Profili per bordi di Vetro per protezione ripiani del Frigorifero, oltre che per estetica. Sono di Lunghezza 250mm Altezza 10mm e lo Larghezza 6mm, il taglio di incastro è da 3mm, lo spessore del Profilo è di 1,5mm. Per i miei Ripiani ne…
Lid of the first drawer of the fagor combi refrigerator-Tapa del primer cajón del frigorífico Fagor combi
I dusted off my old blood bowl team tin to find the D&D mini I'd modified to be my Krox fell apart over the years in storage. My printer doesn't make small figures well, so I needed something I could make somewhat easily. I cut…
I needed one so i remixed this. You have to remove the original stuff to put this one
Va assemblato incollando un bullone e un dado da 5 mm It is assembled by gluing a 5mm bolt and nut
The painting “Shaman Seira #1” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…
Gridfinity bin for Vigor finger ratchet, see: https://www.amazon.de/Fingerratsche-feinverzahnt-Vierkant-Sechskantaufnahme-Linkslauf/dp/B00SJ6LBXC You can get the FreeCAD model:…
Here is a simple and practical insert I designed for the card game Rigor Mortis: Ja, Herr und Meister! (German version of Aye, Dark Overlord! ) This organizer is designed to fit perfectly into the original box, keeping your cards neatly…
I needed one so i remixed this. You have to remove the original stuff to put this one
Va assemblato incollando un bullone e un dado da 5 mm It is assembled by gluing a 5mm bolt and nut
Grigori Efimovitch Raspoutine — Buste 🇫🇷 Description Ce buste représente Grigori Efimovitch Raspoutine dans une interprétation sculpturale classique limitée à la tête et au haut du torse, reposant sur un socle sobre et équilibré. Les…
I dusted off my old blood bowl team tin to find the D&D mini I'd modified to be my Krox fell apart over the years in storage. My printer doesn't make small figures well, so I needed something I could make somewhat easily. I cut…
