Wyniki wyszukiwania: ikes

6mm Diameter Shibari Rope, 50mm Long Spikes NSFW

Adorable Bunny Magnets - Easy to print tiny bunny magnets to make your fridge happy. Appreciate the likes and downloads. Thanks! :)

Adorable little bunny magnets that are easy and quick to print and a great way to make neodymium magnets cute. The little ears provide some grip to lift the bunnies off the fridge in a humane way. Finally tried to pause at layer in a…

Worx Landroid wheel spikes for better grip

A spikes for better grip that helps a landroid going uphill or in a sharp corner

Expanding Bar-End Plug for Road bikes

This minimalistic bar end expands from 18mm up to 21mm, locking your bar tape in place and giving your bike a nice detail depending on the chosen color. The bar end will of course also fit mountainbikes and other handlebars. The mechanism…

Radrunner Front Rack (Rad Power Bikes), 20 x 20 x 16 cm

Hello, because the Front Rack by Rad Power Bikes for the Radrunner-Model (and other Models, too) is sold out all the time in Europe, I had to create one on my own for my camping trips. :-) It`s very stable and large enough to carry a…

Bleeding Syringe Holder for Disc Brake Bikes

Simple syringe holder that holds the syringe on the bike frame or fork during brake bleeding. This keeps your hands free for other tasks. The syringe is hold into place by a rubber band and another one is used to attach the holder to the…

Anti-bird spikes (version 2.0)

EN: Another of the many anti bird gutter-guards. This version has significantly less material consumption and is extended with a few parts overlapping the gutter hooks. It is conceptually based on the older model at…

Star Wars Nihil Strikeship

The Nihil Strikeship appeared in the Star Wars main comic run (2020-) #29. Dimensions Length Width Height 86mm 63mm 17mm The model comes with an articulated stand. Alternatively, it is also compatible with a big pin and base . Print…

Mynocks : Empire Strikes Back : Star Wars

Mynocks : Empire Strikes Back : Star Wars Stick a few of these on your windows or models.

Wallmount for 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2

Wallmount for E-Bike 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor. Mountable with two screws to a wall or, using the holes on the backside with 2 screws (Phillips Rounded Head…

a ring with spikes for a shod flail

obruč s hřeby na okovaný cep slouží k výrobě doplňkové zbraně do výbavy hry Kenka puppetgame jedná se o zjednodušenou podobu zbraně ze středověku a v českých zemích ji proslavili husité. Tyto kroužky se navlečou na dřevěnou tyč o průměru…

Multiple Styles of Schrader Caps, Tire Valve Cap for Cars, Bikes, Carts, Etc.

From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…

Print Flat Bird Spikes

Keep pesky birds, squirrels or other creatures off your stuff with these defensive spikes. This brand new design is printed flat for speed and printability. It uses very little plastic compared to other designs on Thingiverse. The end…

Little Tikes Turtle Sandbox

Holes added for more detailed eyes

Rope bondage spikes | Shibari thorns (round)

Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…

PET Bottle Watering Spikes Slow Watering

Update 23/09/2023: I have tested the single point water spike and found that the hole was to small so it printed solid i have now made a v2 and made an adjustment so the hole is about a 1mm in diameter and prints without closing up…

Ryden Bikes : Setup and measurement tool

Ryden Bikes Smart Measurement and setup tool UPDATED Jan 2025 Updated links + New iOS app available Oct 2023 with new V6 version. This tool is useful for serious cyclists that have had a professional bike fit, or that have multiple bikes…

Parkside PMRDA / PMRA robotic mower Spikes

I was displeased with how well my mower was moving on my uneven lawn, so i designed and printed some spikes. They can easily be screwed in the wheel with small wood- or metal screws. The design can be a bit up scaled but it fits well how…

Little Tikes Story Dream Bookshelf

Update: I have made a new version that fits taller figurines, as well as more books --6 full sets now (18 books). Check it out here: https://www.printables.com/model/1568232-little-tikes-story-dream-projector-bookshelf-v3 I wanted a nice…

Spikesnout from Horizon Forbidden West

Add some stat buffs with the Spikesnout's unique abilities! This machine is to scale with the official board game and stands on a 45mm base. It is intended to be printed in one piece (with the base) for stability. All credit for character…

Spacer für Mac Ride oder Shotgun Kindersitz bei Cube Bikes mit innenliegender Kabelführung

Der Spacer ist für Cube E-Bikes, bei denen die Kabelführung innenliegend im Vorbau ist und man den Mac Ride oder Shotgun Kindersitz installieren möchte. Dafür die 3 teilbaren Spacer ausbauen, den obersten Spacer ganz nach unten, dann den…

Bird spikes

I printed ours out of PLA and this is their third winter on our roof, after having been attached with a hotglue gun. When placed in sufficient quantities and strategically placed, they work well at keeping the pidgeons out of the little…

Toe Torture Spikes

Little Tikes Cozy Coupe Replacement Key

Well....my daughter somehow lost her key to "start" her Little Tikes Cozy Coupe. As a parent I could not find it if my life depended on it, she hide it well. @_@ Any who I whipped up two different version in Fusion 360 based off some…

BTA Bottle Cage Riser for TT and Tri Bikes

Just updated the files to v2, enlarging the bolt holes to 5.5mm to accommodate a m5 bolt diameter easier. My wife needed a bta (between the arms) bottle cage riser for her 51 Speedshop cockpit on her tribike. Figured I'd share the design…

Universal bike handle mount – extra sturdy, fits e-bikes, cargo bikes, dirt bikes.

A durable, universal bike handle mount designed to fit all standard handlebars. Reinforced to support the weight of e-bikes, cargo bikes, or even dirt bikes (if mounted upside down). It’s easy to print: only requires support between the…

Ultimate Headset Spacer for Bikes - Low Poly, Smooth, & Ultralight (Parametric)

The world doesn't need more boring 3D printed headset spacers, so I made some slightly less boring ones. I also made some very boring headset spacers. These are for standard 1 1/8" headtubes, but I've included the F3D and STEP files so…

Cat Repeller Spikes

I like to see you make and review! The neighbourhood cats make a habit of jumping on my garden hose reel. This can't handle this well so that's why I designed this and attached it. Advice: carefully remove it from the bed. The design may…

Spikes for helmet

DISCLAIMER: Adding elements to the helmet can be DANGEROUS and even ILEGAL. DISCLAIMER 2: Original 3D designer: SergiLorenzo Therefore, they must be printed on flexible material, which does not interfere with the operation of the helmet.…

DJI RC Mounting Plate (e.g. for bikes and bicycles)

This mounting plate results in a very robust mount for the DJI RC remote control, such as those offered for the DJI Mini 3 Pro drone. The mount is tailored to the remote control and intended for outdoor use, especially on bicycles. Note:…

Bird spikes for balcony

A simple spike strip I made for my balcony handrail, to keep birds from resting and doing their business there. Nothing fancy as such. Dimensions copied from some strips I had purchased too little and ran out of. They came with two-sided…

Rope bondage spikes | Shibari thorns (Flat V2)

Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅). For safety…

Simple bird spikes

Just a simple print created in Tinkercad to keep the swallows out of my carport. Designed to fit most build plates and if they are too small or too large use the resize option in your slicer of choice. PLA is fine as they do not take a…

Articulated lizard with spikes

articulated lizard remixed in blender

Lego Compatible (15490.dat) Minifig Armour Shoulder Pads with 4 Spikes

This model is compatible with the lego system.

Little Tikes Dream Machine Bookcase

Upgraded Little Tikes Dream Machine Book Case to fit some of the taller character figurines.

spikes for crocs

perfect for print in TPU if you want flexibility or PLA if you want rigid piece.!!!!

Thumb Throttle Lever for Rad Power Bikes

This is a reworked version from an stl I found on thingiverse, I didn't like how the thumb throttle got in the way when I'm not using it, so I made it fit all way to left side of throttle and angled it 90º to the left. Print instructions…

Parkside robot lawn mower wheel spikes

Add some extra traction to your Parkside robot lawn mower! These fit really tightly to the wheel.

Moss pole head with spikes

One with medium spikes, one with long spikes - both tested. Paint little support in the middle and your good to go. Print everything else according to the original model from Wivry. I have made my own improved Moss Pole, if you are…

The Ice Spikes Minecraft Set (21131-1)

This is the Ice Spikes set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…

Lego Compatible (5639.dat) Minifig Helmet Mask with Shoulder Armor and Long Spikes

This model is compatible with the lego system.

Lucky 13 Sword with Spikes Diablo Style

Lucky 13 Sword with Spikes Diablo Style If you like it --> press like it :-) Sword for the funny lucky 13 figure, which is inspired by the Diablo Hack and Slay game. I use this hands to use the sword, they work better than the original…

Bike - Wall Mount for Thru-axle bikes

A mount to support a thru-axle bike vertically against a wall. Take off your front wheel, roll your bike to the wall, and push. Important Notes - Use at your own risk. Be aware of cranks/pedals! Pedals will inevitably ding a wall, your…

Rope bondage spikes | Shibari thorns (flat)

Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The wedge shape lets you easily get them under tight wraps and deep enough to keep them from moving or flipping out sideways. The…

Universal Valve Cap for Cars, Motorcycles & Bikes

I have designed a knurled valve cap , as shown in the image. This valve cap features a universal design and complies with the international standard ISO 9413 , ensuring compatibility with common Schrader valves . After rigorous testing,…

Yamaha XT 350 (1994) chain slider (may fit other bikes)

I made this chain slider for a yamaha xt350 since the actual part is really hard to find in my country. So here it is in case anyone needs it. You will need to rotate it in your slicer, also print it with supports. I would recomend to…

Navimow Terrain Spikes

Glue the cap on. print solid or with 40+ infill.

Lego Compatible (5681.dat) Minifig Headgear Helmet with 5 Spikes SW Moff Gideon with Visor and Cheek Indents Pattern

This model is compatible with the lego system.

Lego Compatible (88295.dat) Minifig Armour Shoulder Pads with Top Spikes

This model is compatible with the lego system.

Ice Spikes Frosthaven MagHex

I remixed the original Ice Spikes by bdworks4 to create a more even surface so that a figure can stand on the terrain and I added a base to make them fit into MaxHex tiles.

Gardena R40Li Wheel with Spikes

I've used the wheel design and added spikes on one side for better grip.

Little Tikes Basketball Hoop Height Hinge

0.2mm resolution works fine. Print flat on back of part

Kick stand foot for bikes (high-res)

Need a way to express yourself? Having trouble getting to 37 pieces of flair? Add this kick stand foot for extra flair! The diameter of the hole is approx 25mm. The slit in side of shaft/hole and printing in TPU helps give some…

Lego Compatible (15727.dat) Minifig Armor Shoulder Pads with 4 Spikes

This model is compatible with the lego system.

Speaker Spikes & Washers

Speaker Spikes & Washers Modelled in muscad, rendered into OpenSCAD, rendered into STL. The muscad version used here is fork that is still in development, which adds fillet & chamfer operations to cylinders. You can find it here . Four of…

Covid19 face shield without spikes for holes

There are many versions for face shield headbands. But all of them require making holes into the protective sheet by punching or laser cutting. Too complicated in my opinion. Here is my version of the headband without pikes for holes,…

Drop Bar End Plugs for Road Bikes

Remix of the end plugs by Stamos that fits drop handle bars. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.12 Infill: 20% Filament: BasicFil PETG black Notes: Turn on bridging and…

Easy to print bird spikes

It is so to print Material: PLA/PETG etc. Size: 25cm long With 2 screw holes, but i fitted it with double sided tape

Print on Fabric Test (Long Spikes)

This is just a simple long spike version of a test print for printing on fabric. I have a short spike version as well for those who want to try it with less height. I can also add a tutorial for fabric to use as well as procedure if…

90° Brake tube bending die for 4.75mm 3/16th brake tube for cars and bikes

Because I couldn't get consistent results I designed this easy to use die to bend the brake tube around. It works a treat! I've download other peoples files and I'm happy that I can pay back with a useful design of my own :) Here's the…

Hedgehog spikes fabric

Included are a couple of sizes that you can just pop in the slicer and get going. Also I have included a .blend file with the model for more tinkering, increase - if you want a custom size , just increse or decrese the array modifiers…

Halloween Bat Headband | Bat Wings & Spikes

🦇 Halloween Bat Headband – Spooky 3D Printable Costume Accessory Add a spooky touch to your Halloween costume with this bat-inspired headband , featuring large bat wings and decorative spikes. Designed as a fun and eye-catching 3D…

Lego Compatible (39260.dat) Minifig Armor Shoulder Pad with Spikes on Top

This model is compatible with the lego system.

Little Tikes Story Dream Projector Bookshelf v3

This is a storage shelf to hold Little Tikes Story Dream projector books. It is an updated version of my original bookshelf based on community feedback. I also needed space to hold more books. This version holds six full sets of books,…

Tiny Little Tikes Jr Activity Gym

A tiny scaled model of the Little Tikes Jr Activity Gym! All credit to them but I wanted a tiny one for my desktop. Print Settings: .1 mm to .2 mm layer height 100% infill since the parts are so thin Print 2x of the side piece Assembly…

Rear Tire Lever for BMX bikes

BMX Rear Tire Lever use this to make replacing your rear wheel a breeze. I got tired of stacking tire levers, and made this- it pushes your tire back against the chain and keeps it straight while you tighten the rear axle bolts/nuts. I…

Scicon Aerocomfort 2.0 bike bag adapter for thru-axle bikes

Convert an older Scicon Aerocomfort 2.0 bag for use with thru-axle bikes. Specifically, these pieces are used to upgrade the quick-release-only frame of this bike bag into one that fits 100x12mm and 142x12mm thru-axle bikes. Full details…

Front Rack for Bicycle - Rad Power Bikes

Rad Power Bikes front rack is usually out of stock, so I made this wee substitute for it. The rack transports a twelve-pack of one´s favorite beverages or an equivalent amount of whatnot. It also has a built-in slot as an extra feature to…

Modular bird spikes

I really like pigeons but I don't like cleaning their shit so recently I have embarked on a quest to stop them from nesting on my balcony for the third time. Those models are the results of that struggle. Spikes can mounted to different…

Guitar spikes

Guitar spikes

Bird Spikes for Wide Fence

Got chickens or other birds that climb on top your fence…? Do the commercially available options not work because you need something beefier…? Well, look no further! Bird Spikes that can be fastened to the top of a fence - tested against…

A brick with spikes

IMPORTANT: Print the bricks with line width set to 0.45. You may need to adjust flow before the bricks stay together well. If the bricks are too loose - add 1%, if they're too tight - reduce by 1%. The spikes can be very sharp. Don't…

Skull with Spikes Shoulder Pads

There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this month's release patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…

Dragon dice tower with spikes

Dragon Dice tower with spikes to prevent dices from escape

A2 Bikes SP - On Bike Storage

**This is a Work In Progress - See Below** **Non-Commercial License** Please send me a message if you want a commercial license for the A2 Bikes SP design, a model for another bike, or have any other questions. **RECOMMENDATIONS:** I…

Bottle holder that will fit kids bikes and hold 0,5 ltr bottles

A normal bottle holder will sit to high on my kids bike, so i designed this one a bit lower, so it fits perfect. Can Hold a 0,5L bottle but also the standard water bottles. This file is without my sons name on the side. Print in nylon for…

Improved / repaired spikes for ReProps's "Majora's Mask from Legend of Zelda"

I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…

Croc Spikes (Fix)

yep

Lego Compatible (15597.dat) Minifig Hair Long with Spikes and Elf Ears Pattern

This model is compatible with the lego system.

Modular Little Tikes Story Dream Bookshelf

My kids have loved their story machine for years now and it has become a cornerstone of their bedtime routine. However, organizing these story collections has been a nightmare as we add more and more. Sure, there as commercial cases and…

Gloomhaven Obstacle Spikes 2-hex gap fixed

ShadowJak's version on Thingiverse had a very small gap between base and model, which showed as errors in some slicers. For this remix I fixed that by moving the model down to the base.

Vader vs Skywalker in The Empire Strikes Back Bookends

The Darth Vader bookend shows the Sith Lord in his menacing armor and helmet, wielding his red lightsaber. The Luke Skywalker bookend shows the young Jedi in his rebel outfit, holding his blue lightsaber. These bookends are a remix with…

wine glass holder for wine hikes

Update: The model has been enlarged and adapted for larger white wine glasses and red wine glasses to reduce tip-overs. --------------------------------------------------------------------------------------------- Weinfreunde kennen das…

Lego Compatible (93056.dat) Minifig Armor Breastplate with Shoulder Spikes

This model is compatible with the lego system.

Little tikes story dream projector

This is a holder for the Little tikes story dream projector books and figures. I was tired of my 3 year olds little tike books laying all of the house. I created this in Fusion 360. This is my V1, so if there are any concerns or…

Weather Station Rain Gauge Bird Spikes

It's important to keep bird droppings from getting into the rain collection funnel of your weather station, so bird spikes are an important addition. This spike ring is designed to fit funnels that have a 118mm outside diameter, which…

Cat deterrent spikes

Cat deterrent spikes for the top of your fence. These have quite a thin base, but are quite strong enough. Simply screw them to the top of your fence to keep cats away. Two sixes, 250mm long and 80mm long. This should do you but you can…

Voronoi Anti-Cat Spikes

Pulled away from it's crucially important duty of making public spaces unlivable, defensive design can finally have a real purpose; keeping cats off shit. I use it for my PC, I plan to put it on top of my enclosure. Stretch, duplicate,…

SUCCULENT PLANTERS - SPIKES DIAMETER 85MM MODEL

This planter is designed to cover the standard plastic planter with a beautiful geometric design and contain the water from drainage holes. You can plant directly in the 3D printed model but be aware that 3D design do not have drainage…

Spikes 35mm

Es sind 9 , 35mm hohe Spikes die vielseitig verwendet werden können. Ich persönlich habe die simplen Spikes für Figuren erstellt, um sie besser in der Steckmasse zu befestigen. man kann sie auch selber so Skalieren wie man sie braucht

Spoke Clickers for Kids Bikes – Heart, Dice, Star & Ring - Easy Print

These spoke clickers add sound and style to your ride, designed to fit children’s and standard bicycle spokes (1.8–2.3 mm). Available in two diameters (2.2 mm and 2.5 mm) and four designs — heart, 6-sided die, star, and ring — they snap…

Wall Support for Fix/Track Bikes

Discover our wall-mounted bike rack! Personally designed and created, this rack is perfect for organizing and displaying your bike safely and stylishly. The rack has been 3D printed using 3/16 inch anchors to ensure a sturdy and reliable…

Yardforce Classic 500 Wheel Spikes

These spike are a quick model that lips onto the inside edge spikes of the original wheel. they should work by just clipping them over the inside spikes on each wheel making 8 extended spikes per wheel. The 17 mm spikes are probably too…

C-Clip for brake cables on Decathlon Triban bikes

A small part to attach your brake cable from front to back along the bike body.

Sipikes Collar with Interchangeable Spikes

Do you want a unique and stylish collar that reflects your personality? Sipikes is the perfect solution. With its interchangeable spikes, you can create your own custom design and change in whenever you want. Sipikes is made of…

Lego Compatible (88001.dat) Minifig Weapon Club with Spikes - Small

This model is compatible with the lego system.

Bird Spikes

Size of the spike plate is adaptable in scad file. I've printed it in PETG, but couldn't reduce stringing to a reasonable value, so I added covers for the spikes, which can be ripped off after printing.

Parkside PMRDA/PARMS lawn mower spikes

I've prepared two models with different spike types. Original model: https://www.printables.com/model/1325786-traction-assist-wheel-for-parkside-pmrda-20-li-b2 3D printing spikes for Parkside robotic lawnmowers. Compatible with the PMRDA…

Little Tikes Story Dream Bookshelf Remix - Additional Height

Added additional height to the top shelf for larger characters