IMOU IPCAM housing
Embedded/ Integrated Housing for IMOU IP Camera into ceiling. COQUE encastrée pour camera IP, marque IMOU (AMAZON)
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 40
- Polubienia
- 12
- Ocena
- 0
Liczymy pasujące modele…
Embedded/ Integrated Housing for IMOU IP Camera into ceiling. COQUE encastrée pour camera IP, marque IMOU (AMAZON)
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Visor for the IMOU 2C camera. This visor is designed to leave the entire field of view of the 2.8mm IMOU 2C camera unobstructed, therefore it does not obstruct any other model. It may also be compatible with the 2E and 3C series cameras…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
About The Ultimount is a low profile, invisible and easy to print (zero supports needed) mounting hook solution for the Ikea Skadis. The hooks and mounts have been designed to ensure no supports are needed to print either the hook, or the…
Description Wall-mount bracket designed specifically for the IMOU Ranger 2 camera. Features a compact design with just enough space to accommodate the network cable. For best results, print with the camera attachment side facing the print…
Summary This is a model of a Audi RS6 limousine / sedan in a kit card style. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned and the car may roll. Versions There is a 3MF-file…
A PS4 Controller mount for ikea skadis but with the ulimount pins because I find they work best
replacement part to mount your imou ipcamera upside down
Summary This is a model of a 1965 Lincoln Continental Convertible Limousine in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels…
That little clip you can use to attach the camera to the ceiling. Two versions, one with a M4 hex nut insert and one for a normal screw.
I always wanted to sit on the couch with laptop but also have 2 screens. I always knew I could use my iPad as a second screen via Sidecar and I just wanted the iPad mounted above my laptop. So after 50+ iterations, we have UNIMOUNT. It…
English : Correction : access to top usb port cleared. The reworked optimized last version of my first rotativ Speederpad mount. Printed it with Black PLA+. Layer height : 0.2 ; Width: 0.4 Walls : 2 ; Wall ordering : From outside inwards…
Tiny Limousine, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Pretty nice Ikea Skadis Storage Bins Depending on the size of the bin you need a different amount of connectors: Small: 2 connectors Medium: 3 connectors Large: 4 connectors Deep bin: same but 8cm deep instead of 5cm deep
After trying and really enjoying how the Skadis Ultimount works, I wanted to add to my designs. It seemed cumbersome to copy or recreate the slot each time. Using the design diagram for the connector slot, I created a negative so now you…
So we have an Imou cam here at home to keep track of the dogs when we are away. However the Imou A1 (Ranger 2) cam can be pointed upwards pretty good but does not go that far downwards. So we have to help it a bit by angling it more…
I was desperatly searching for a mobile mount for my speederpad but didn't find any so i decided to build one. The very nice and solid Tower mount clip credited to @YosiYaffe https://www.printables.com/@YosiYaffe was a huge time saver.…
I saw another magnetic GoPro-mount (https://www.thingiverse.com/thing:5113985?part=2244e745-4d1c-45bf-a7fa-e8c859e1130e) which used different magnets than I had at home so I modelled my own version using double 10x2mm round magnets in…
Hi, here is a wall mount, to hang your Imou Indoor Camera from a wall. I used two 4x11mm rivet nut and two M4 x 15mm screws.
support for imou cue 2 C camera I used for the 3D printer
The original hooks Fleximounts sells are designed perfectly for Metal, they aren't very conducive to Filament as you will see pictured the original designed printed does not hold much weight… Completely re-designed from scratch a…
Lego Minifigure Holder using Skadis Board Ultimount Hook
NEMA17 MultiMount The Orig is Alu made Category: DIY
This is the first version of a Yoto Mini shelf that can be used in multiple scenarios. Currently, two options are available: Attach the wall cleat to the wall and slide the base down over it for a floating wall mount. Attach the base to…
A simple holder for Imou Bullet 2C camera Category: Household
The FlexiMount 360 is a highly adaptable, versatile phone cradle designed for a wide range of uses, both indoors and outdoors. It functions as both a hanging phone holder and a traditional stand, offering hands-free convenience in any…
This double-length dinghy has four times the cabin for four times the fun.
remix of support cue 2c made by Mark with mount holes for 503 wall box
This design prints in two pieces, and is designed to fit together tight without sanding. UPDATE: I have widened the lower opening, allowing the cover to actually pass over the knot.
This is a model I made is of my dream car. (Please comment)
Lego Brickheadz Holder for Skadis boards using the Ultimount Hook/Connector by DavidsGotWood and the Skadis Ultimount Negative Slot Tool by Matt Polito.
A simple camera wall mount for Imou Bullet Category: Household
just stretched and reoriented to make it so the hook is 90 degrees offset when fixing.
Wall/glass mount for IP camera Imou REX IPC-A46L. The holdes fits also to other Imou camera models with similar bodies.
Camera hood for Imou Versa (https://www.imoulife.com/eu/product/detail/versa). Attaches to the camera with out fasteners (snug fit). I printed with 0,6 mm nozzle and 0,4 mm layer height on my Prusa Mini (est. 28 min).
This is a rework of the Ultimount Negative Slot Tool by M3 Makes as .STEP file. As I was working on it I realized that it is a bit too loose for my liking, so I also added a ‘Tight’ version for it, which should hold nicer. This also…
## IKEA Skådis – Stanley Tylon 5 m Measuring Tape Holder This is a custom-designed holder for the Stanley Tylon 5 m measuring tape , made to mount securely on an IKEA Skådis pegboard using UltiMount clips . It keeps the tape measure…
UniMount Version Base/Receiver Found Here: UniMount Printables Page Idea: A simple dog poop bag holder, to have a roll of poop bags (like these: Amazon Affiliate Link ) available in a convenient spot around your house! Ours is on the back…
FlexiMount_MOLLE Bigger is a simple, compact plate that allows you to attach various types of equipment in different ways. The plate is relatively flexible thanks to its PETG material. The plate measures 140 x 90 mm. Nozzle diameter - 0.4…
Lego Astronaut Minifigure Holder using Skadis Board Ultimount Hook
Similar to the Heavy Duty Hook but a bit smaller for light cables or other whatnots.
Needed a mount for my imou camera to fit the p1p. Using it to put the live view of my printer in the corner of twitch streams. Will hold by itself on the printer, but for safety it's better to stick a piece of 3m double sided tape like I…
This is to mount my Imou to my Ender 6. I'm using Sketchup as my modeling software. Use support and print as it is shown in the STL but you can try rotating it if you want.
Imou LifeCam Holder (upside down) Print Settings Printer Brand: ELEGOO Printer: ELEGOO MARS 3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Filament: ALL ALL ALL Category: 3D Printing
This is a holder for the Viking Arm Jack so that you can organize them neatly on the wall. The dimensions are made so that you can also have the base plate attached while storing the jack. Multimount The holder can be mounted with several…
Držák složí k odložení myši
I made this model for IMOU Cue 2 camera. I wanted to create a hood covering SD card slot and the reset button. Made this model in FreeCad after a few trials. Printed in Pure White Numakers PLA+ 1.75mm filament on 0.4mm nozzle Anycubic…
Imou LifeCam Holder For IKEA Skadis board (Invert) Category: 3D Printing
The FlexiMount Cable Holder is a versatile and easy-to-use solution for managing your cables. It can securely hold up to two cables, each up to 8mm in diameter, and can be mounted on a wall or desk with a single screw. Inserting or…
What Is The UniMount System: This is a group of models that can be used to create anything mounted to other things. The ideas was to have a system of default base/"receiver" model that can be remixed or updated to use any mechanism to be…
Replacement bushing for the interface between the pole & the gas-spring arm. Ripped dimensions from an original. Category: Replacement Parts
Dom Pedro II (Pedro de Alcântara João Carlos Leopoldo Salvador Bibiano Francisco Xavier de Paula Leocádio Miguel Gabriel Rafael Gonzaga) — Buste 🇫🇷 Description Ce buste représente Dom Pedro II, dernier empereur du Brésil, figure majeure…
A remix that allows the left USB port to be used (if you moded the case to expose the left USB port). It's otherwise exactly the same as the original. Print with tree support, bed only. probably best to print with PETG. May interfer with…
Imou LifeCam Holder For IKEA Skadis board Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20% Filament: ALL PLA Category: 3D Printing
Adapter that help replace ring 2nd doorbell to imou DB60 without drilling extra holes in wall
A very niche thing but I used them for years on my WMO
Alternative version of the storage bins with the ultimount hook system
Hi, I bought the security camera (imou) that came with only one bracket. since it is battery operated, I thought it would be more useful to move it to another place sometimes. so I needed a few more brackets. i searched on the internet…
Inspired by Tyler's project ( https://makerworld.com/it/models/532892-a1-a1-mini-ring-camera-mounts?from=search#profileId-481673 ), I created this mount for the Imou CUE 2C camera to place on my A1 mini printer.
Didn't love the angle of the original mount.
This model is a remix that allows use with the Imou 2C camera. Thanks to the author for the STEP file.
Discover FlexiMount, the cutting-edge solution that transforms your walls into adaptable display spaces! Our unique, length-adjustable rail fits seamlessly into any room—perfect for living rooms, offices, or galleries. Product Features:…
Simple 2-pin Spanner Wrench to take the Gemtech Multimount apart. Category: Sport & Outdoors
This holder takes a Niimbot D110 label printer and mounts perpendicularly to an Ikea Skadis board to minimise footprint, using 2 of @davidmakes 's great Skadis Ultimount hooks . Allows full access to the power button, label printing (face…
Remix of model with modular hook system, no supports required for hooks anymore! Different hook system: Ultimount
Voici un support pour la caméra d'intérieur imou ranger 2C afin que l'on puisse installer celle-ci sur la bambulab A1. l'impression a été réalisée en 0.16, avec une impression de côté afin de solidifier la pièce (sens des lignes…
FlexiMount_MOLLE is a simple, compact plate that allows you to attach various types of equipment in different ways. Thanks to the PETG material, the plate is relatively flexible, and because of its compact design, it uses only about 10 g…
I used pla with 0.3layer height, 50% infill ,prusa slicer. use zip ties to secure the holder with a stick and ranger 2 CCTV. IT IS DOING BETTER FOR ME. i can’t reach my terrace, so i placed a stick in the old chimney hole with a camera…
Holds a Dymo LabelManager 420P label maker reasonably snugly. Uses 3 Ultimount connectors: Print standing up.
This holder takes 2 different sized cutters and mounts perpendicularly to an Ikea Skadis board using 1 of @davidmakes 's great Skadis Ultimount hooks . Larger opening: 21.5 x 13.5mm Smaller opening: 15.8 x 11.3 mm
some drilling and screwing required. fan substitute → https://www.digikey.com/en/products/detail/qualtek/FAD1-04020BBMW11/2600065 This mounts with t-nuts on the 2020 extrusion of the printer it's working with. I designed this in FreeCad.…
First of all, for commercial reasons this can NOT be called Magsafe , being trademarked by Apple, we go by the name Qi2 , published by the WPC. I choosed to make phone hardware because 90% of people here dont actually have a professional…
This mount was designed for the Imou Rex and allows it to be attached to the ceiling of a gerbilarium using magnets. note: I have an old version of the rex and a new, both work just fine. Parts List (minimum configuration) 5× M3 threaded…
Ce modèle 3D est un support conçu spécifiquement pour installer la caméra de surveillance iMou Cell PT 360° (3MP 2K 100% sans fil) directement sur une gouttière en aluminium rectangulaire standard (type dal'alu / corniche), sans aucun…
Ce modèle permet la pose d'une caméra iMou sur un coffre de volet roulant sans percer le moindre trou. Idéal pour les locataires ou pour éviter d'endommager vos menuiseries ! Le système vient simplement se clipser sur les rebords du…
The original Ultimount is designed for the IKEA Skadis, whose board is about 5 mm thick. On a thin metal pegboard (1–2 mm), the hooks sit loose, wobble, or drop out. This remix narrows the gap between the hook and the back plate so it…
The iMou camera (Ranger 2C-H3) is a self standing device and has no screw to fix it. This model allows to handle it and to fix it on a tripod standard screw. No camera dismantling to avoid warranty disruption. Made with 3 parts: the X and…
This model is not intended to be printed itself This is the missing piece of the Ultimount system created by davidmakes to allow custom components to leverage the pegboard hooks. This model is designed as a positive to be imported into…
This is a simple box/shelf for holding ryobi drill bits to the pegboard. It's built using the Ultimount system for IKEA pegs to help make printing this easier.
Summary This is a model of a 1965 Lincoln Continental Convertible Limousine in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels…
Dom Pedro II (Pedro de Alcântara João Carlos Leopoldo Salvador Bibiano Francisco Xavier de Paula Leocádio Miguel Gabriel Rafael Gonzaga) — Buste 🇫🇷 Description Ce buste représente Dom Pedro II, dernier empereur du Brésil, figure majeure…
## IKEA Skådis – Stanley Tylon 5 m Measuring Tape Holder This is a custom-designed holder for the Stanley Tylon 5 m measuring tape , made to mount securely on an IKEA Skådis pegboard using UltiMount clips . It keeps the tape measure…
Voici un support pour la caméra d'intérieur imou ranger 2C afin que l'on puisse installer celle-ci sur la bambulab A1. l'impression a été réalisée en 0.16, avec une impression de côté afin de solidifier la pièce (sens des lignes…
I was desperatly searching for a mobile mount for my speederpad but didn't find any so i decided to build one. The very nice and solid Tower mount clip credited to @YosiYaffe https://www.printables.com/@YosiYaffe was a huge time saver.…
A remix that allows the left USB port to be used (if you moded the case to expose the left USB port). It's otherwise exactly the same as the original. Print with tree support, bed only. probably best to print with PETG. May interfer with…
This double-length dinghy has four times the cabin for four times the fun.