Wyniki wyszukiwania: issues

Pocket tissues protects

This match for tissues protecter ptissue_stor (2) ptissue_2 or 2ptissue to mk3s The last one ptissue_stor (1) is for small objekt you ned to protect

Prusamnet tissues

Have you ever look at your tissues or papers for print sheet cleaning and wondered if you could turn them into a cool Prusamnet spool? In that case this model is just for you! What is Prusamnet PβDG ? Prusamnet PβDG ( Polyβ-D-Glucose or…

X1 / P1P PTFE Tube Guide to fix loading issues - best of both worlds

Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…

AR15 M-LOK Airsoft Forgrip for Rifle with Gas Block Issues

Needed more grip on my ARs. This version was made for rifles that had issues due to the gas block location. If you need your grip in the perfect location, but due to the gas block, you could not put it there and had to compromise, this…

Box Turtle Hub to Fix lane 4 loading issues

you will need to shorten ptfe from extruder to hubs by 9mm this prevents the jamming of lane 4 by adding length to allow internal geometry to better direct the filament and keep it from hitting the wall where the bearing for the filament…

2005 Toyota Tacoma 5 speed manual shift knob - FIXED slicing issues

Liked the original design, but modified to fit my 2005 Tacoma Prerunner with a 5 speed manual. I added length to the bottom, opened up the hole diameter and added 12mm x 1.25 threads. 6/17/2023 - I fixed some slicing issues. It should…

Apex Legends Nessie *Flat Bottom* *scaling issues fixed*

print with supports

I Have Issues Warning Keychain

I Have Issues Warning Keychain

MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks

I modified on (MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks) to make the arm sensor longer, and it worked fine when I test it. Give it try !

Tissue Box 200mm Tissues

I made this tissue box holder for my 200mm tissues. There are 3 different designs for the box. Print with respective lid. It can be scaled as desired also below is the link to onshape model to make your own changes.…

Orrery turntable remix to fix slicing issues

Repair of the Mechanical Orrery turntable by https://www.printables.com/@M4NU

Ikea skadis Zewa Rollenhalterung / Zewa Halter / tissues holder

Hi. The diamter from the holder is 35mm. The width is 125mm.

Durable tissue box cover (150x tissues; h65mm)

A durable tissue box cover that prints efficiently. Couldn't find any models of a tissue box cover that would fit our local (EU) size boxes. The ones I could rescale to fit, would result in a waste of printing time and material. Even…

Apex Legends Nessie *improved scaling issues with original model fixed*

print with supports

One-handed removable paper roll holder kitchen wipe tissues

I also included the FreeCAD source files , so you can edit them on your own without any proprietary software. Please share the models if you make your own. If you are in the EU and want to support my work, you can support me by buying…

Ender 3 V3 SE X Linear Rail known issues fixed

known issues fixed

Test print to diagnose extrusion issues

Details: https://www.reddit.com/r/FixMyPrint/comments/s2gg9p/anycubic_i3_mega_s

Napkins/tissues box

Napkins/tissues box. You can use ideaMaker to add any texture you like https://www.ideamaker.io/texture.html.

Gridfinity Double Tempo (tissues) box

A 3x3 (126 x 126mm) Gridfinity box that holds 2 tempo tissues packs next to each other. (108 x 108mm inner space). Thanks to @jdegs who provided the Filled-in Gridfinity Boxes (For Customization) that I used as a base for this model.

Tissues box holder under the shelf

Holder for tissues box under the shelf. You can screw it or stick it to the shelf. For 55 mm high box. Print Settings Printer Brand: Prusa Printer: i3 MK3 Filament: PM PLA Category: Household

Qidi I-Fast Upgrade to Klipper BTT and solve HW issues + BLTouch Holder

*** Be aware that there is no way back, takes time and money - consider buying new printer first. But I'm happy now and that what counts *** *** Discord to exchange knowledge and ideas as we keep improving IFast —…

Lego tissues holder

A holder made for the LIDL size tissues, looking lego-like. Made for a office, so there is a logo of my company, feel free to print without the embosed text.

Extruder MOD for SliceEngeneering Copperhead hotend + MMU2s and 3mm inner diameter PTFE tube - No load/unload issues!

This is a remix/combo + cleanup of exellent MOD by SpartanDog3D and JASII adapter for CopperHead hotend. It uses 4mm OD and 3MM ID PTFE tube to feed filament from MMU to the extruder and it solved most of my issues (still better tune the…

TPU case for pocket tissues

This is a protective case for pocket tissues, designed to be printed in TPU. You can decorate your case with an image by adding a negative volume of 0.4mm thickness to the front wall (for instance, Prusa Slicer can extrude SVGs directly).…

Gopro Attachment to Phone Mount Adapter-No Supports (Updated) (all known issues have been fixed)

This device lets you mount your phone on any gopro attachment. No support generation needed.

stable tissues

I was tired of my tissue box falling off the shelf when I took a tissue out. I have my tissue box on its side as its easier to remove a tissue when in bed, but the whole box wants to come with it. This is my solution and it works…

Shorter version to prevent collision issues (43mm base instead of 47mm)

Shorter version, 43mm to fix collision issues. No z-resize, it was cut and 4mm were removed. K1 max has 45mm distance between the nozzle tip and lower rod (see slicer config for your printer). The original model is 47mm. This means when…

Tissues Holder TPU

This tissue holder is both an ecological and cost-effective item that you can 3D print in TPU and take it outdoors or wherever you need it. It has the same dimensions as a typical pack of ten paper tissues, but you will save money and…

Tissue box with a cap and a hole at the bottom to push the last few tissues up

A tissue box with a cap and a hole at the bottom to push the last few tissues up.

Qube 500 - Tissues and Lube Holder

We’ve all been there. You’re browsing Printables and your 0.2 nozzle swaps to 0.8. Your TPU95A now has the tensile strength of PC. Your VOCs are about to seep out of your enclosure. All you can think about is bed adhesion. Your extruder…

Tissues Stand

An elegant single piece of tissues and toothpick holder

HSW Earplugs, Tissues and Nasal-Spray Holder

Another HSW-as-a-nightstand holder. Fits your favourite set of earplugs, one pack of tissues and a nasal-spray. Use the Fusion-file to adjust hole-dimensions, if needed.

-0.06mm and -0.12mm offsets for the ram on the vulture in case you have weird seal issues

parametric model added too ig, just in case u want some special tolerances i found my vultures orings to be super tight so they did get an amazing seal but the prime was real stiff

Ish-Shoes (issues)

Wherever you go you will have people asking about your ish-shoes. Where did you get them? How did you get them? Or maybe they even have similar ish-shoes. These are the only ish-shoes you need!

Karen Tissue Issues

Funny Tissue box

Tissues holder

On length it have 100mm/10cm/3.93Inches

Aufbewahrungsbox für Tempotaschentücher / storage box for Tempo tissues

Aufbewahrungsbox für Tempotaschentücher / storage box for Tempo tissues

Tissues Pack Gravity Holder (12 pack)

Do you have many packs of tissues around the house? Do you want them all in order and close at hand? Print a gravity holder! Now it's longer (12 pack vs 10) and compatible with prusa mini!!! PLA layer: 0.2 infill: 10% You can use duble…

Sagrotan Tissues Dispenser 10-pack

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Easy to print, no support needed. I recommend printing a bit…

Tissues box holder for Rogue 2019

My car is not designed by my wife. So there is a need for tissue box to be resolved with easy access when lipstick is on wrong place during driving. So the only logical place was in the upper middle part of the cabin, whether she is…

Sagrotan Tissues Dispenser 60-pack

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Easy to print, no support needed. Overhangs are 40°. I…

Auto-Centering Filament Spool Roller V3 – Stable & MMU3 Safe (Fixes Spool Derailment Issues)

✅ What’s new in V3 This V3 version introduces a true auto-centering roller geometry , inspired by real mechanical guiding principles: 3° inward taper (convergent draft angle) Larger diameter at the center Smaller diameter toward both ends…

Pickle Rick Tap Handle (Non-manifold issues fixed)

Skadis tissues box holder / Taschentücher

To help me keep my desk tidier, I designed this tissue holder for the Ikea Skadis system. To mount it to the IKEA Skadis, simply use the awesome T-clips by Line Arc Line . Don't forget to share a picture of your print.

Big spool of tissues

A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is detachable and designed so that the outer casing can be replaced separately. Replaceable decoration printed in vase mode. To…

Pickle Rick Tap Handle (Non-manifold issues fixed)

Skadis tissues box holder

To help me keep my desk tidier, I designed this tissue holder for the Ikea Skadis system. To mount it to the IKEA Skadis, simply use the awesome T-clips by Line Arc Line . Don't forget to share a picture of your print.

-0.06mm and -0.12mm offsets for the ram on the vulture in case you have weird seal issues

parametric model added too ig, just in case u want some special tolerances i found my vultures orings to be super tight so they did get an amazing seal but the prime was real stiff

AR15 M-LOK Airsoft Forgrip for Rifle with Gas Block Issues

Needed more grip on my ARs. This version was made for rifles that had issues due to the gas block location. If you need your grip in the perfect location, but due to the gas block, you could not put it there and had to compromise, this…

Tissues Holder TPU

This tissue holder is both an ecological and cost-effective item that you can 3D print in TPU and take it outdoors or wherever you need it. It has the same dimensions as a typical pack of ten paper tissues, but you will save money and…

Gridfinity Double Tempo (tissues) box

A 3x3 (126 x 126mm) Gridfinity box that holds 2 tempo tissues packs next to each other. (108 x 108mm inner space). Thanks to @jdegs who provided the Filled-in Gridfinity Boxes (For Customization) that I used as a base for this model.

Tissues Pack Gravity Holder

Do you have many packs of tissues around the house? Do you want them all in order and close at hand? Print a gravity holder! Print instructions PLA layer: 0.2 infill: 10% You can use duble sided tape or "4" 3,5x20 screw for mount it

Fix ABL issues with MAXPROBE backplate - Fixes auto bed levelling issues for Sprite Extruder with CR Touch on Creality printers CR10 Smart Pro Ender 3 S1 - Zero Y 0 Y crtouch probe offset mount

Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…