3338 modeli
Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…
Wydruk około 2,03 €–2,49 € nettoWstępna wycena jednego wariantu
A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
A two piece lens cover for the Logitech StreamCam. Use any bit of filament, 1.75 mm, as a pin for the hinge. Can be printed without support
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Logitech C270 webcam mount for an Sovol SV-06. Perfect for monitoring and Octoprint time-lapses. This is a remix of the mount from In3DSpace : https://www.printables.com/model/3991-logitech-c270-mount-prusa-i3-mk3 Print instructions: 0.2…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
This remix brings a consistent, high-quality texture to your Logitech MX Master 3 / 3S . I modified the model to allow Fuzzy Skin on the external surface of the buttons as well as the shell. This ensures a uniform look and significantly…
Wydruk około 5,22 €–6,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
All available mounts for the C270 webcam somehow did not fit, interfered with something or where just too big, so I made my own. You'll need 3 M3x20 screws and nuts to assemble - because everybody who owns a 3D printer has those, right?…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Layer height: 4mm Infill: 10 (or 0) Support: no
Wydruk około 3,71 €–4,53 € nettoWstępna wycena jednego wariantu
I have printed them with 100% infill. So far, they have proven to be surprisingly robust.
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis mount for a K380 Keyboard from Logitech
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
This model is free. If you appreciate this model, please leave a download and a like! The full-size model is almost 18 cm and fits on the Prusa Mini+ but it can also be printed at smaller sizes for tabletop war gaming scenery or as a game…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
As the title says, these are cat ears for the Logitech G432 headset. I don't know if they will fit other Logitech or other brand headsets. I specify the the critical dimensions of the model below: The model has a 10 x 2 mm hole for it to…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
Mount your Logitech C270 Webcam to the X-Axis on a Prusa i3 MK2/MK3. The C270 is my go-to webcam for integration with OctoPrint, and this is my favourite "nozzle view" mounting system. Update April 4, 2021: Fellow PrusaPrinters user…
Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When the rubber on your mouse has decayed more dramatically than my will to work after vacation — it’s time to 3D print a fresh shell for those sweaty gaming sessions
Wydruk około 6,23 €–7,61 € nettoWstępna wycena jednego wariantu
This adapter lets you connect a Logitech C270 webcam to a standard, ¼" threaded tripod mount. I use a small Manfrotto tripod to capture timelapses and monitor my prints, so I wanted to be able to put the webcam on a standard mount. The ¼"…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
This remix has an obvious and a few less apparent design changes. The most obvious change is that i opened up most of the cover area by removing the top an bottom layers and thus revealing the infill. (I needed to do some geometry…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
I was looking for a way to mount the Logitech C920 Pro inside the Original Prusa Enclosure . With the help of Markus and his Slim Mount Base , I modeled up a corner mount in front of the LED strip of the Original Prusa Enclosure . It is…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick Tinkercad design to solve the issue of the Logitech Brio 4K Camera mount covering a small amount of the top of the Alienware AW3423DW OLED Gaming Monitor. I used Prusa PETG in Black. Pictures are in draft mode but works…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 I was not so happy with the existing solutions for logitech webcam holders so I thought about it and created a new design and solved another…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mount based off of the following Thingiverse models: HeyVye's modular mounting system This c920 bracket This 2020/3030 extrusion bracket You will need to disassemble your c920. Perform steps 1-5 of the iFixIt C920 teardown ,…
Wydruk około 4,32 €–5,27 € nettoWstępna wycena jednego wariantu
A simple loose-fitting privacy cover for the Logitech StreamCam webcam. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Rear Perimeters: 2 Layer override: 3 perimeters on the topmost layer so no…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed it with Prusa Jet Plack PLA. For fixing you need a transparent double-sided tape.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…
Wydruk około 0,99 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing PLA, .20mm, supports optional ~22min Parts Required 3x20 pin (1x) Logitech Camera c270 w/hinge mount removed (1x) M3x8 Screw (1-3x) Assembly Push the 3x20 pin part way through one side of the mount, use pliers if neccesary Put…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Kingroom kpl1 V2 camera mount for Logitech C270 (Not sure if it will fit V1) you will need 2 screws M3 6mm 1 screw M3 18mm ****this screws was included with the printer**** I included the step file print setting 25% infill no support…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
For best result use the included .3mf file. Otherwise consider the use of supports in the USB Storage. Otherwise print without supports.
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
A simple mount for a Logitech Streamcam and the Ender S1. Can be printed on its side without the need for supports, with the exception of paint on supports for the cable holes. To attach to the body of the S1 I used M5 x 19mm screws.
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
I was looking for a protection cover that is suited for transporting the Logitech StreamCam. The covers I found were a bit loose and wouldn't stay on the webcam so i designed one with a snug fit and two hooks to prevent it from slipping…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in PLA 0.3 draft layer height with brims. I had to clean up magnet holes a bit before magnets fit snugly in. There was a bit of a gap between front and back so I used a soldering iron to further sink the magnets in place. One…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
My kid has a laptop for school this year and wanted a wireless mouse.. I am letting them use my Logitech M557 travel mouse, but I wanted a case for them to use to protect it.. Photos mounted in Fusion360 as a Canvas, some design later,…
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
hi, a simple cam mount a small one and a long one. Warning ! you can only put them on the right side of the Printer, on the left it will hit the bed
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a modded mount plate for the Next Level series, it allows fitment of a USB “Chinese Version” Handbrake (e-Brake) and the driving force shifter together. The factory plate does not allow both to go together without drilling random…
Wydruk około 16,63 €–20,33 € nettoWstępna wycena jednego wariantu
for english see below Kamerahalterung Der zur Logitech Brio mitgelieferte Halter gefällt mir nicht. eine stabile Montage am Monitor gelingt mit damit nicht. Meine Monitore sind an einer Zentralen Monitorhalterung (35 mm Säulendurchmesser)…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Super simple to print and use Logitech C920 (HD PRO) webcam blocker that will sit on top of your camera and will block the camera for your privacy. =) Just print the part laying on the logo and you will not need any support or brim.…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Ножка для клавиатуры Logitech Deluxe 250 Leg для клавиатуры Logitech Deluxe 250. Обе ноги зеркальные. На одном столе. Печатайте с опорой со стола.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
The Dell U3219Q's monitor bezel is quite thin, and the BRIO's mount covers the display by 5 mm without the spacer. This spacer is as wide as the BRIO mount and fits in the front height and rounded corners. Thanks Raphael@Raphael for the…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Español: Soporte de webcam Logitech C170 para la Ender 3 Pro. Este soporte está modificado para que no choque con la cama caliente. (Ver fotos) English: Logitech C170 webcam support for the Ender 3 Pro. This support is modified so that it…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
Upgrade your 3D world with this sleek, architectural Solar Carport! Whether you are building a smart city diorama , an EV charging station model , or a sustainable farm layout , this design delivers professional realism without the…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
A simple case to protect your spare Nitecore NL1416R battery when it's rattling around in the bottom of your bag while it's not in use. Cap comes on and off with a satisfying “pop!” Print with the open ends of the case and cap facing up.…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small snap-in mount remixed from this tripod adapter (by GioSunrider ) for the Logitech C500 and the original Flexi-Arm mount (by mkoistinen ). The mount replaces the original stand and therefore you will lose tilt and sway functionality,…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with PETG. The part has +0.2mm tolerance on every fitting surface. With my Ender 5 i got a tight but makeable fit. Some fiddling is required to insert the screw of the original part into the print. It will cut its own threads into…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Re creation (not remix) of https://www.printables.com/model/216076-tightening-key-for-the-logitech-driving-force-gt-w Made for easier printing and added comfort Printed at 0.2mm layer height with 30% zigzag infill Also added .ipj file for…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
EN: The stand in the style of Greek architecture is modular and consists of the following parts: - a universal column with a thread for head screwing - 3 versions of interchangeable heads (Doric, Ionic and Corinthian) - 5 length…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Handles for the hot water / and steam valve Profitec Pro300 with 6 mm valve axis The core (here made of orange Prusa ABS) should be printed from ABS or a similar material, as other materials become soft and deformed by the heat. I printed…
Wydruk około 0,54 €–0,67 € nettoWstępna wycena jednego wariantu
This RC handler came very handy to.. you know.. handle the RC. Not a lot of things to say about it, but some infos though : __________________ Technical info : PLA + / PLA is fine 0.3 mm layer height is ok 5 walls __________________ Other…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This is a simple molle clip I made for the Nitecore NU05 V2. The clip on the light kept popping off my backpack. I made this to stay clipped on much better. Print in PETG so it has some flex without breaking while you attach it to molle…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dvoudílný držák modulů DCCDIP2 od firmy Ignitech pro zapalování motoru Rotax 912. Držák je navržen pro montáž na místo mimo motorové lože letounu.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stand for the Ayaneo Next that slots into the phone/tablet stand on the Logitech K780, so you can play games that require a mouse and keyboard on the go. Works fine, just be careful when you pick the device up out of it, I somehow…
Wydruk około 5,67 €–6,93 € nettoWstępna wycena jednego wariantu
no supports needed
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Its a tight fit so that the cable stays where its supposed to You may need some extra tape on the back(probably not): To mount it just put some tape on the bottom: Here is the cable from AliExpress:…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
The model is intended to replace the plastic handle on the bottom of display holders (for position adjustments) and mount a cam on there. The material I used for printing is ABS as the back of my monitors is oriented toward the windows,…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
After getting lose speaker holes on the cover i decided to design those PETG slot to make the speaker holes stronger as the cover is flimsy and makes the holes not straight. Print them not too fast as they are small, then glue them with…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is based on a Raspberry Pi camera mount that I modified from Andy’s Y-axis mount for the Ender 3 V3 SE. However, once I started printing in an enclosure, the Pi camera began to overheat. That led me to dig out an old Logitech…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
Anycubic I3 Mega has two pushed out holes on the X axis support box, this bracket snaps in place with out the need for tape or glue. For this model, I’m showing and using the E5150 B525 cover, but you can use any of their covers for the…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
I recently bought the Nitecore EMR10. It comes with 10 packages of repellent mats. As I wanted a fancy form fit box for it, I created this handy box. Check out the pictures and the model, you might like it
Wydruk około 3,79 €–4,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple privacy cap for the Logitech C270 - Focus Adjustment Mod . ⌀ 17mm with an inner slope of 0.2mm - may fit other similar mods. Features No supports required ✨ Extremely fast print (≤2 min) 💨 Print ≤0.20mm layers recommended What…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Ich nutze die Modelle als Halterung für den Stecker „ Kalitec KALI-2408 ”, um das Netzteil meines „Prusa MK3.5” außerhalb des Druckergehäuses ( PrintClosure-Projekt ) zu montieren, sowie für den Stecker „ Kalitec KALI-2406 ”, um…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Verwendung: Die Tastatur "POP Icon Keys" von Logitech kann damit inklusive Maus platzsparend aufbewahrt werden. Es kann auch ein Handy oder Tablet noch dazu gestellt werden auf die Ablage vor der Tastatur. Das ganze Set kann mit dem…
Wydruk około 5,46 €–6,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cyberpunk 2077 : Militech Crusher
Wydruk około 33,94 €–41,48 € nettoWstępna wycena jednego wariantu
276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link). I split, rotated, and…
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
now on makerworld
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
UPDATE: I reorganized the files so they are easy to find in chronological order for printing and changed some file names for better understanding. I deleted the back plate file from the project due to confusion about what to print. I also…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Clam shell protective case for Logitech MX Master 3 & 3S. Magents Fits together with either four 4x4mm or 6x3mm magnets. Choose the right files below. Location Pegs Cut 2x 8mm lengths of 1.75mm filament. Press fit or glue into the small…
This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print. 3 parts to print: 1x “G29_Center” 1x “G29_Handles_Back” 1x…
Wall mounts for some sets of the LEGO Architecture Skylines. Each bracket is to be fixed on a wall by a single screw. The screw mostly balances the model out, so it will not tip over when the screw sits tight. Let's show the world how…
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
This is a simple mounting bracket to attach a Logitech C270 to the Ender 3 X-gantry. It holds the camera at a good angle towards the bed and printing head, with the tilt being adjustable. The camera and bracket itself are attached using a…
A remix of hennysavenije's work, resized to 1:50, and put bases back on. Original collection has been removed from Thingiverse.com They do not claim credit for designing these models, and this is a remix of that. I've tested on a Prusa…
These are made to add to architectural models, in order to give them some ambiance, if you're an architect you'll understand the need for this kind of objects! The models were designed with simplicity, practicality and printability in…
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
Just a remixed mount piece for the Logitech c270 webcam. I had already removed the mount plate from my webcam for a previous mount so this lets you just screw that into this piece. (it is/was a bit of a mess around to get the screw in,…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Modular Phone stand for Logitech wheels G29/G27/G25. I used M5 screw with self locking nuts for assembly. The system is modular and adaptable for any smartphone. I use this with simhub dash. Print instructions Category: Video Games…
Prints without supports. I used 0.16mm layer height with 15% infill.
Use original screw to secure on shifter. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Anycubic PLA Grey Notes: Any material does the trick. Category: Gadgets
I've recently encountered some technical difficulties with Printables and Stripe, which means I can't sell the complete version of this model with the screw holes right now. I'm actively working to resolve these issues and hope to set up…
Rome Colosseum, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…
