Wyniki wyszukiwania: its

Oculus Quest 2 VR pistol grip - Fits Quest 3 controllers

IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…

Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…

Shoe organizer_Less Filament. More Power. Fits All shoe Sizes.

<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…

Drill Bits Holder (v2)

Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. The drill bits holder is printed in 3 parts: holder, label and ruler (optional). The label…

Tits out, panties forgotten.

lego compatible alphabet and digits

Alphabet that can be built on with Lego bricks (but have a flat bottom). The basic brick size "I" is 2x10. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: PLA Category:…

Raspberry Pi 3B+ Case (SnapTop) fits SenseHat

This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…

Cyberpunk Kitsune

Cyberpunk Kitsune. This would make for a nice wall hanging. In prusa slicer right click on model → add negative volume -→ gallery -→ universal wall mount hole. -→ align to your liking. or do a negative boolean and make it a mask.

Drill Bits Holder / Bohrer-Halterung

Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…

A fully parametric strong wardrobe rail bracket for a cylindrical rail (fits Ikea Hjalpa)

edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…

LTT "Quick Bits" Case & Stand for Linus Tech Tips Screwdriver Bits

I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…

Zenitsu Chibli Style'ish

Zenitsu Chibli Style'ish

Child safety lock for seat belt (3 versions) // Kindersicherung für Sicherheitsgurt PKW (3 Versionen)

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…

Nespresso Vertuo Pod Drawer Organizer (fully-parameterized, auto-splits into multiple parts)

This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…

Handle for Medieval mace / Husitský palcát

Medieval mace - this is a medieval weapon, widely used during the Hussite Wars. An extension of the great original model with a handle, while keeping the original holes. No need to adjust the size of the original model from @WikiFiser, it…

Improved Dosing Funnel fits 54mm Breville/Sage Portafilter

A dosing funnel specifically designed for the WDT (Weiss Distribution Technique) that is compatible with 54mm Breville/Sage portafilters. This funnel captures stray coffee grounds that would otherwise be lost during grinding. Key features…

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

PrusaCaster mod for BexGears Electric Guitar Kits

UPDATE Guitarv2.stl now has the Bridge and Pickups lowered by 12mm to fit the BexGears kit better. The 4 holes used to attach the neck are in totally different areas. PrusaCaster mod for BexGears Electric Guitar Kits…

Utility Hook - fits Honda Ridgeline

Recommended print settings: Layer Height: 0.2 mm or less Infill % : 50+ Supports: Yes Support Type: Organic/Tree Supports Print Orientation: Default as modeled Material: PLA or PETG Raft: Optional Brim: Optional Two of these parts are…

Dremel bits holders to use with the Gridfinity system

Printed with no support and 25% infill.

Cup Holder Expander (Fits Silverado)

There are a few cup holder expanders for vehicles out there, but I wanted to include some details from several of the versions I saw online. This one includes smoother edges all around, and the onside will fit a can, such as a 12oz Coke…

Rocket Fruit from Blox Fruits

The image compares the size to a track pad. As you can see, it is quite small. Supports are required. The stem might break off while removing supports, so be careful. If it does break, you can use a 3D pen to weld to the model.

Ender 3v2 Shallow Tray For catching "bits" and "strings"

Pretty straight forward build for keeping your print area cleaner. The amount of small bits of plastic that comes from printing is aggravating. Vslot clovers are nice to keep that area clean, but the whole printer gets dusty and covered…

LM8UU Bearing Greaser Nozzle (with caps. Fits on to 100ml CRC grease tube)

I had bunch of CRC grease tubes in garage, and wanted to design LM8UU bearing greaser nozzle with caps, so you can keep them even in your home office drawer without cleaning them. Nozzle screws into 100 ml CRC grease tube. Top cap seals…

Sun, water, and tits out.

Catapult Card + 3 fast projectiles fits PrusaMini

Adam-M 's Catapult Card is realy great and the only missing peace are the right projectiles. So I resized the best flying projectiles from SteveJohnsen and put them into the Catapult Card. They are even flying faster know! One print,…

Strainer for washing fruits and vegetables

Simple strainer for washing fruits and vegetables

Prusa MK3 - Smaller SideBoxes for some Tools - fits under bed in the back

This is an edited version of this Sidebox ( https://www.prusaprinters.org/prints/974-prusa-mk3-sideboxes-for-some-tools ). I needed a place to place some electronics, like a stepdown converter, on my MK3s. The original box was a bit long,…

Printboard - A prototyping board for electronic circuits

This model can be used as an inexpensive and configurable breadboard alternative, with the advantage that the components can be soldered in-place. Print instructions Important Notes You need a 0.25 mm nozzle to print this The electronic…

Cordless drill and screwdriver mount, my new Ryobi fits to

On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…

Mitsubishi Endeavor Gear Shift Sleeve - MR581866

No Supports Required Print Time: Approx 10 Min Printer Used: Ender 3 v2 with a 0.6 mm Nozzle Printer Settings 0.3 mm Layer Hight 2 Walls Speed 80 mm/s

Cover Retainer Clip - Fits various Honda/Acura Models

The plastic covers in the engine bay contain a dozen or so retainer clips that tend to fly out and get lost when the cover is removed. This part is a replacement for the retainer. Must be printed in the orientation modeled - if printed…

Kitsune Straw Topper

This is a kitsune straw topper. I wanted to make a new straw topper since it's been a while! Print flat with no supports. Works great in PLA or PETG! Category: Kitchen & Dining

Protection Kit / Sicherheitsrahmen Icom IC607mk2g

SicherheitsRahmen für das Icom IC706mk2g Amateurfunkgerät. Um dieses beim Transport vor Schäden zu schützen. 2 Teile müssen gedruckt werden und man benötigt 4 Senkkopf Schrauben M5x12 um die Teile zum montieren.

Keychain with logo. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota.

Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…

Host-swap SFF 2.5" caddy for FUJITSU PRIMERGY servers

You need 4pcs M3x6 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY TX120 S3 SFF FUJITSU Server PRIMERGY RX100 S8 rack server FUJITSU Server PRIMERGY RX1330 M1 rack server FUJITSU Server PRIMERGY…

Fantastic Dragon sits

Hello, I have a Fantastic Sitting Dragon for you. It is suitable as a decoration. For coloring for children. For playing for children, or for a diorama. It prints very nicely. Good luck with the printing! I used PLA/PETG as the material.…

Riser for Tea Bag Dispenser (Fits Celestial Seasonings)

I really love Tea Bag Dispenser - Faster Stackable Interlocking by pwnate , but it won't work for Celestial Seasonings teas, which aren't individually packaged. In my case, I not only needed to leave space for CS boxes, but I also needed…

1x3 units, full height, 1x1 grid Stackable Insertbox

Stackable Insertbox 1x3 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

True Fruits Trichter / Funnel 99ml 250ml

Der beste Trichter für 99ml und 250ml True Fruits Flaschen

BEST BENCHY TOY FOR KIDS SIZE FITS MOST MEDUIM TO LARGE 3d printers x200 fits!!

Here is bench x200!! I recommend slow printing speed any filament Enjoy!!

Halter für die Fernbedienung der Mitsubishi-Klimaanlage

Die standardmäßige Befestigung für die Fernbedienung besteht aus einer Aufnahme auf der Rückseite. Zum Aufhängen an einer Wand braucht es deswegen einen Nagel, das erscheint mir aber nicht sehr elegant. Aus diesem Grunde konstruierte ich…

Hot tub for Maileg Mice/Rabbits etc

A model of an inflatable hot tub that I made for my daughter’s Maileg animals. This is able to hold water if you wish to use if for waterproof dolls instead. Supports are only advised on the water pump pipes. Created in onshape, step file…

Rivian R1S and R1T Lower Console Trash bin fits into Yee Pin lower console organizer. Note: as of 3/25 the organizer is "not currently available on Amazon"

Wanted a good and stable trash can in the front of my R1S. Bought the Yee Pin lower console organizer from Amazon to hold and stabilize it in place under the dash.…

Ford Maverick Espresso Cup Holder (FITS)

This is a cup holder specifically for espresso cups, which don't fit in the standard cup holders, it uses the Ford FITS mounting system. I've included two models, one with the handle facing straight out from the mount and one at an angle…

Screwdrivers Bits Box

A quick remix a this amazing parametrix box, for screwdriver bits storage. You ca add a 10x5x2 magnet to lock the bit holder in place.

Halteclip für Qeridoo Babyschale + Hängematte mit Sicherheitsschale

Im G-Code wurde eine Druckpause hinzugefügt um den vorhandenen Gurt in den noch offenen Bügel einzusetzen.

Zenitsu picture

3D model picture of Demon Slayer Zenitsu for two colour filaments and postprocessing colouring with acryl colours. 3mf time for print 4h and 11min. Speed 0.3mm. Dimension 187 x 160 x 4 mm. For PLA.

Nozzle on hose for vacuum cleaner (Siemens, Bosch, Grimi, Krups, Pitsos)

The nozzle connects the hose to the vacuum cleaner. According to multiple websites it is compatible with devices from Siemens, Bosch, Grimi, Krups and Pitsos. For 35 mm Ø hose (Hose outer diameter 40mm). I personally used it for the…

Large Incense Stick Holder (Fits Murphy's Naturals Mosquito Repellent Incense)

I got sick of digging in the lawn to pull up the sticks from burned-down mosquito incense (or trying to find a plant pot to stick them in on the upstairs porch), so I decided to print a holder. The one jurassic73 designed was nearly…

FOLDING CUP !WATER PERMITS! FOR DRY PRODUCTS. GREAT NUTS

СКЛАДНОЙ КУБОК

Door Hinge Stop - Prevent door from closing by itself

I have a door that I want to stay open but it closes by itself so I made this to fit onto the hinge and hold it open. Fusion 360 f3d file included for you to change dimensions to fit your needs.

ItsLitho Avengers

Today we see doctors, nurses, policemen, firemen, civil protection personnel, volunteers as the great heroes of the moment, forgetting that there were also yesterday and there will be also tomorrow, ready to help those in need, with no…

2020 Mitsubishi Outlander PHEV Armrest Storage Insert

I've created this armrest insert to aid in keeping things more organized in there. Box size is 120 x 167 mm and the brim is 128 x 171 mm. Brim size can be increased by about 6mm all around (3mm per side) if you want a snugger fit. The…

Mitsuri

Demonish Slayer

Signo Mitsubishi UNI Uni-ball Gel Ink Pen (0.38 mm) Stand

I needed a stand for my Signo Mitsubishi UNI Uni-ball Gel Ink Pen (0.38 mm) set, so I designed one. The top and base print without supports. The struts have minimal and easy-to-remove supports. The tolerance for the press-fit struts is a…

Hygrometer Lid for Silica Gel Box - Fits hygrometer with latches

After getting cheap round hygrometers and printing a bunch of hygrometer lids I found that they would not fit because they are tad too large to go through the lid opening in the original lid and have very hard latches which do not…

"Wallbox" für Typ 2 /Schuko Lader für Mitsubishi Eclipse Hybrid

Mit dieser Halterung ist der Typ 2/Schuko Ladeaadpater aufgeräumt nd gleichzeitig wird Last von der Steckdose genommen, das ist vor allem dann wichtig, wenn ein Zwischenstecker zur Verbrauchsmessung zum Einsatz kommt. Ich habe das Teil…

Parametrical Wooden Plug arrangement for Model Slits

I created an OpenSCAD skript to define a number of bolts (wooden plugs) in a circular arrangement. Those I use in my large robot figures for splitting the model and making assembly way more simple. I scale up my model to the desired size.…

1x2 units, full height, 2x2 grid Stackable Insertbox

This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…

Original Prusa Enclosure (OPE) - Back Panel PTFE Tube Slits Cover

Close the slots on the left and right side of the enclosure, provided that the holes for the PTFE tubes are not broken out. You need the following parts to mount one cover: 1x M3 8 mm Allen screw 1x M3 nut The model is crated with FreeCAD…

1x3 units, half height, 2x3 grid Stackable Insertbox

This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…

OpenPrintTag Clip-On Holder – Glue-Free, Self-Centering, Fits 1 kg Spools

————————————————Deutsch———————————————— Universeller OpenPrintTag Halter mit selbstzentrierender Dreibacken-Mechanik (OpenPrintTag Remix) Dieses Modell ist ein Remix des "Reusable OpenPrintTag Holder" von Filamentalist und erweitert…

Disposable Tuna Can lid (fits 3 5/8 inch cans - 85.7mm)

Sometimes you have left over tuna or water chestnuts and don't use the whole can. Print one of these in PETG (dish washer safe) and it snaps easily onto the can. Extended flanges on two sides make it easy to remove. Rated disposable…

H4 bits sys3 attic holder

Drop-in replacement for the regular 6/8 1/4in bits holder. Accommodates 14 bits, 2 large bit slot on the site if needed. Note: with this holder, the tray does not fit in the middle compartment of the lid.

Wowstick + bits holder

update 13.3.2024 add Holder for Xiaomi Two version of wowstick holder A-Version Complet holder with backplate for wowstick, 52 normal 4mm bits and 4 long 4mm bits. all parts can be printed without supports. All for this version is marked…

ProPipette - luer splip syringes conversion kits

ProPipette conversion kits available The three models currently available are: Kit for 10ml luer slip syringe . 3D printable parts: - Universal spout printed in TPU (This spout works for all luer slip type syringes). - Printed TPU plug…

Genmitsu CNC 4040-PRO Tools holder

Add-on for the CNC 4040-PRO to hold the Probe, the tools for the collet and the 2 allen keys. The model needs a magnet (10mm or less): The magnet will hold the holder on the junction box on the Z axis and at the same time will secure the…

Mk 4 new bits

I needed to shift the y motor pulley a little more that the shaft would allow. this shim did the trick (I had to use longer screws, however. Also, I felt the X motor wire looked a bit exposed and prone to flexure at the motor housing.…

Mitsubishi Legnum/VR-4 spark plug clamp

It is best (i would even say its mandatory) to print it in ASA/ABS for temperature and chem resistance.

Covid test holder for NHS Test & Trace kits (Lateral Flow Test/Rapid Antigen Test)

The home covid screening test supplied by the NHS are well packed for putting through a letterbox but not great for storing and removing items quickly & easily or holding the kit whilst you do the test. Basically, they were making a mess…

Halterung für Lechuza Feuchtigkeitsmesser/ Mount for Lechuza moisture meter

Eine Halterung für den Lechuza-Feuchtemesser (Artikel Nr. 19714). Die Befestigung kann mit 2 Schrauben Ø 2,5 mm oder mit Klebestreifen (z.B. Powerstrips) erfolgen. Für den Druck ist kein Support erforderlich. Translation: DeepL A holder…

HexHolder - Never lose your HexScraper again (fits Prusa MK3/MK3S/MK3S+)

By far my most used print is my HexScraper. It's a fantastic tool that I know won't damage my print bed. However, I kept losing the damned thing! This is a super simple attachment that just plugs in to the top of your MK3 Z axis holder…

True Fruits Trichter / Funnel 99ml 250ml November 24

True Fruits Trichter für die 99ml 250ml Flasche mit 15 Prozent infill und mit der 0.4 hf Nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Standard Size Spool Adapter - fits MakerBot Replicator 5th gen and Replicator+.

Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: Yes, Tree/Organic Print Orientation: Default as modeled. I added a support blocker at the top: Mounting (reference pics as I haven't printed this file…

Slits for Double Slit Experiment

Try the original double slit experiment from home with these 3D printed slits and a common laser pointer! Go as detailed as your printer can handle. Getting the slits nice and clean will give you a much better effect. Thickness of the…

1/4" TS Instrument Cable Holder (fits Planet Waves and Ernieball)

It fits the following as I have tested on my own... D'Addario/Planet Waves cables with the Geo-tips Ernie Ball Users report it also fits the following... Some Fender cables (see user comments)

Vitsoe 606 shelf T-nut

You need a M3 bolt + M3 threaded insert (OD 5mm, length 3mm…8mm). After printing, melt the threaded insert into the piece. Print “upright” for best quality (I found other orientations made the nut not fit exactly). No supports needed.…

Bitsholder and screwdriver

Bitsholder with a strong clamp that is designed to easily slide onto a belt or pocket edge. The bits holder has room for 10 bits and a slot in the end that can be used as a screw driver. The holder has 3 slots for 9.5x9.5x3 square magnets…

Ceiling Curtain Rail Connector Clip fits UrbanRed

Made to fit the UrbanRed Ceiling Curtain Track Rail System https://amzn.to/43jKipe * * Amazon Affiliate Link

Netrunner Token Box (Aurbits)

Updated the older model, the new box is heavily inspired by the token box by PrintArtificer at Etsy. The box holds a complete set of tokens for the card game Netrunner by Aurbits (2025), this includes the credit tokens. The new design is…

Bits and Bobs Boxes for Game Storage

These are little storage boxes with lids for organizing your game pieces. I have provided two heights, the smaller being half height for efficient stacking. The game in the pictures is Earth, great game I highly recommend. I made them to…

Rund Adapter Lenker Vorbau Canyon CP07 (and or other nonround cockpits)

You need to melt a threaded insert (4mm metric) to the upper part and screw it together. The hinge ha a hole for an 2mm metric screw with a screw nut. Maybe you need to tape the cockpit to avoid damage.

Remixed Headphone Holder - fits 48 mm cubicle wall

Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled

Router Bits Holder

6x6 CNC router bits holder for 6.35mm or 1/4 inch diameter, 1/8 inch or for 14x14mm bits housing.

Print-in-Place BitScope Micro Case

A nice Print-in-Place hinged BitScope Micro case based on the parametric hinged container from this instructable . The case has a specific holding slot for the BitScope Micro Oscilloscope & Analyzer, along with another cable tray (for…

Gabarits pour assemblage de tubes - Tube assembly templates

Les fichiers Freecad sont fournis pour pouvoir modifier les dimensions des tubes.

Bone Conducting Headset Charging Dock - fits various DG01, DG02, DG06, DG08, DG10

Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional After printing, the charger cable presses into this part. It takes some force, but this…

Tool-less Replacement Battery Cover - fits VEX 123 Coder

The original battery cover on the VEX 123 Coder uses a screw. This design simply pops into place, no screw required. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes Support Type: Organic/Tree, on build…

The coolest Zenitsu Poster ever

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…

Sicherheitsgehäuse zur Strommessung mit dem ACS 712 Hall Sensor

Achtung : Hier geht um arbeiten am 230 V Netz. Diese Anleitung ist nur für Personen gedacht, die ihre Handlungen selbst beurteilen und verantworten können. Arbeiten an elektrischen Geräten und Installationen können gefährlich sein und…

Clock Arbor Cover - fits 31 day Waltham and others (5 mm arbor with 10mm hole).

Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default

Zbraně v husitském období

Cílem projektu bylo vytvořit modely husitských zbraní, které se následně dají používat jako ukázky zbraní ve výuce dějepisu k tématu husitství.

Interchangeable Stamp for RPG Character Portraits - V01

This stamp was designed to make it easy to Interchange the printed part containing the art for another one. Note: it only works with parts using the same base/matrix. I will post more Portraits arts in the future... Test print was done on…

Support / rack for fruits in melted chocholate

A practical 3D-printed rack for holding chocolate-covered strawberries, grapes, raspberries, blueberries, and other small fruits upright while the chocolate sets. Designed with flexible individual holders to keep each piece separated,…

Rod Sloth - Fits Most 3D Printers - PRUSA - BAMBU - CREALITY

This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…

Corner Clamp (ClampItSquare)

Remix of a design by J-Max from https://www.thingiverse.com/thing:1306832 These are corner square clamps in 30 variations used for woodworking to hold two pieces 90 degrees square during a glue-up or pocket-hole join. Regular clamps of…

Bed Shims - Fits Creality K1 and K1 Max

I'd recommend printing the full set Print from ABS/ASA/PETG - I don't recommend PLA USE the thinnest LH possible for your printer After install, recalibrate your printer and redo input shaping.

Adjustable Monitor shelf - Fits any display: curved back, thin bezel, laptop, or TV.

Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…