3429 modeli
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Wydruk około 7,92 €–9,68 € nettoWstępna wycena jednego wariantu
all available raisers had angles that were too wide for my liking. So I made one, it connects to the keyboard via slide rails, you can also flip it over to keep the keyboard upright when not in use. Tilt the pieces towards the inside, as…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
After many many years of just working on my MacBook Pro, I finally got a “Magic Keyboard" and “Magic Trackpad” and started working in a more “Desktop kinda way”. But the Trackpad was never where i wanted i to be… So I created this “Thing”…
Wydruk około 6,35 €–7,76 € nettoWstępna wycena jednego wariantu
1-key cherry mx macro keyboard for use with the digispark, because sometimes, only one key is needed.
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Just a fun little fidget that just requires a mechanical switch and a keycap. Had a lot of fun making it and it is now a permanent part of my desk. Thanks for checking it out, and happy printing :)
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Since I've got two keyboards on my desk (one suits best for gaming, the other one for hours of typing), I wanted to clear my tabletop or at least organise it in some way. I found some keyboardholders, but in fact they were just too bulky.…
Wydruk około 12,26 €–14,99 € nettoWstępna wycena jednego wariantu
Print Tips The normal size version should be fine for most average keyboards. Can add two small (10mm diameter) helper discs to the model in the slicer (as shown in the attached 3mf file) so we can be more relaxed about printing.…
Wydruk około 1,44 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why I created support? I wanted to be able to put my Magic Keyboard vertically on a support but I could not find any model, this in order to make room on my desk to be able to use the most space to be able to work. So I created my own…
Wydruk około 11,07 €–13,53 € nettoWstępna wycena jednego wariantu
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
3-key Cherry MX macro keyboard designed for the micro USB version of the Digispark. Make sure everything works before pushing in the Digispark. Testing code: include "DigiKeyboard.h" void setup() { pinMode(0, INPUT); pinMode(1, INPUT);…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
For a few years now, I've wanted to design a 3D printable keyboard case… Now, with the XL I finally have the build volume to manage it! I designed this fully 3D printable case as a replacement for the basic one that comes with the…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This print is perfect for displaying your mechanical keyboards. It's available in a single, double, and triple keyboard configuration. The design is inspired by the KeebMonkey Acrylic Keyboard Display Stand . Depending on your printer's…
Wydruk około 5,01 €–6,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This support has an angle of 20 degrees and the same model can be used for left and right keyboard part. Print settings suggestion : 0.8 mm nozzle 0.40 mm layer height no support 15% infill PLA
Wydruk około 4,85 €–5,92 € nettoWstępna wycena jednego wariantu
Apple Magic Keyboard and Trackpad Desk Stand V1
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
Made without ruler
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love my System76 Launch keyboard, but I don't love the ‘daylight’ keycaps. I wanted some ‘pudding’ style keycaps, with black tops and translucent bodies & legends. Due to the atypical sizes of keys used on the Launch, most retail…
Wydruk około 6,34 €–7,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keyboard (or anything else) holder for Cintiq tablet
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
I recommend you print left and right part, even if you need only one replacement. Reason is that these parts are not 100% same size as originals. If you leave one original part, keyboard might not be levelled. Print settings: 0,1 or 0,12…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
DO NOT DOWNLOAD THIS! Download the R2 instead! It is improved in everyway! R2 COMING SOONtm Update: Tightened up the usb port cut out on bottom_1 and fixed wk tops, Fixed plates, fixed wkl top 2 This is a 60% board designed to use…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
Case for the Collide 39 keyboard kit by SpaceCat Designs inspired by the Kishsaver keyboard: https://spacecat.design/products/collide39-pcb-kits Print instructions Print the top with the plate facing down and the bottom with the bottom…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena jednego wariantu
The Noisy Cricket (Mini Gaming Keyboard) A minimal keyboard with just the basic keys for gaming on the go. Mostly targeted at FPS games with a focus on W A S D . The layout can be customized via the QMK firmware. The default layout looks…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
This is a remix of a beautiful and thoughtful model by CodeNameX from Thingiverse. I tweaked 3 things: Steeper angle for the device - it'll now face towards you Easily accommodate thicker devices Shorter back support to avoid collision…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
I used the last version of my keyboard foot successfully until we got a new cat who flopped his entire 14lbs onto the bottom edge of my keyboard. This resulted in these tiny molded plastic stabilizing fins to break off on one side of the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Simple plantilla para piano o teclado para poder apuntar melodias cuando lo necesites , se a impreso en PLA Winkle negro , disfrute imprimiendolo y modificandolo a su gusto . Simple template for piano or keyboard to be able to write down…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Ножка для клавиатуры Logitech Deluxe 250 Leg для клавиатуры Logitech Deluxe 250. Обе ноги зеркальные. На одном столе. Печатайте с опорой со стола.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Large wrist rest for Keychron keyboard Q8 and Q10. You can put magic trackpad on the center of this wrist rest, but if you don't have magic trackpad or wouldn't put it on the wrist rest, I prepared dummy trackpad parts. The wist rest has…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena jednego wariantu
left part, right part and center clips needs to put the joiner bars (wood or something) on front and back outside without keyboard foots, bluetooth, and easy switching Win-Mac I gave up the battery space for bluetooth.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Printed using PLA.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Replacement for the original keyboard stand. Slanted on the underside to ensure a straight surface on the table. Simply click in, set up, done. Upate 11.03.26: longer version added ---------- print settings PETG 0.2mm layer 20% infill…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The black mount featured in the cover photo is the newer slim model using heat-set inserts. For the other red model I used embedded 7/16 nuts with ¼ x 20 thread, for the tripod connection, instead of heat-set inserts, in case you don't…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
As in the title, it is a 7cm taller stand for Yamaha reface Series Keyboards. It makes it possible to have 2 Yamaha reface Series Keyboards on your Desk, and that you can connect both at the samt time!…
Wydruk około 5,53 €–6,76 € nettoWstępna wycena jednego wariantu
Keyboard Foot Hama Tastatur Fuß für Hama Tastatur
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When typing on the computer, I like the keyboard to be tilted. Unfortunately, the legs of this keyboard are too short, and the tilt is therefore small. A simple extension of the keyboard legs solves everything. Print instructions:…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Got a new keyboard did not like the height of the legs so i quickly designed some new legs, double the height. i made custom support on the round thing that goes in the keyboard that need to be snipped off with flush cutters or a file.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
IKEA PAX Side Hooks – Convenient Keyboard Storage Solution Maximize the functionality of your IKEA PAX wardrobe with these custom-designed side hooks! Perfect for hanging keyboards, headphones, or other accessories, these hooks are a…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Logitech MX Modular Desk Dock – Ergonomic 10° Elevation, Tablet Mount & Ruler Vault Integrated Secondary Storage: Capitalizes on the hollow space on the side of the the elevated keyboard frame to store drafting and measuring tools.…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter allows for using a 5 Generation iPad with a Bluetooth keyboard designed for an iPad 2. This adapter receives the iPad 5th Generation and mimics the shape of the edge of an iPad2 so that the iPad 2 can be placed in a Bluetooth…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Lost one foot for the Hama K210 Keyboard - so I made two new ones. The slot with for the foot is approx 18mm In case this is useful for you please leave a like
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Meant to hold cables so it doesn't have to bend too much and ruin the cable
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This cat paw-shaped stress-relief clicker features a 3D-printable spring , allowing use without a keyboard switch. However, we strongly recommend adding a keyboard switch for optimal clicking performance and tactile feedback. Key…
This is a fun little clicker toy for you to enjoy! Please like and boost this project. Thank you. Happy Clicking. For Custom Keycaps: 1. Download the Model and import it into your slicer 2. Add another blank print plate 3. Click and drag…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Epic Charizard-inspired keycap for custom keyboards.…
Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial licenseL https://www.patreon.com/cw/MonsieurPierre Spooky Gengar-inspired keycap. Compatible with Cherry MX…
Crkbd / Corne case compatible with v2 and v3 hotswap PCBs and fr4 switch plates. Builds pictured in this thing were purchased from 42keebs (the kit includes pcbs, trrs jacks, reset switches, diodes and hotswap sockets, top and bottom…
This keyboard clicker fidget is a compact, satisfying fidget toy designed to replicate the feel of a mechanical keyboard keypress. Perfect for stress relief, focus, or just something to click while working. This model prints quickly (≈25…
A 3D printable Keyboard Stand for the Ikea Skadis Pegboard. It allows you to securely display your Keyboard on the pegboard. The stand was specifically designed for 40% (or smaller) keyboards but has been proven to also work for bigger…
Printed mine in ABS with 3 walls and 20% infill, but I'm sure PLA and less infill would work just fine. I used these keycaps https://www.printables.com/model/399607-complete-cherry-mx-stem-keycap-set-optimized-for-3 Edit: Added V2 with…
I love Prusa signature color orange, black and gray. Inspired by these colors, I designed a Prusa-style mechanical keyboard. I also shared the Arduino code so that if you had a 3D printer, you could easily make a mechanical keyboard. All…
Tolerances will be tight but it works fine for me, if you encounter any compatibility problems leave feedback and I will adjust the model. I also provide two different versions so you can pick the handle type that you prefer. Version 2…
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…
YouTube video: This is a keyboard holder. It holds keyboards and it does it well. I made it to fit my 60-65-75% boards but not all boards will fit, I'm working on a 80% version now. (available as experimental) I feel like we need more…
share your opinion in the comments!
A keyboard switch model that I decided to upload from my old blender project. Almost 1:1 scale.
Required hardware: 1x Cherry MX switch or compatible alternative, bonus points for clicky Assembly instructions: Print both parts Insert the switch into the main body When connecting the plant/back to the switch, be very careful to align…
Assembly video: Update: Version 2 Added. Most people with a well-dialed in printer should use this new version. This Minecraft Creeper fidget toy uses a Cherry MX keyboard switch, or similar (I’m using a cheap Outemu Clicky Green switch…
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Thangs and…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Happy Pikachu-inspired keycap for mechanical keyboards.…
A stand to display your mechanical keyboards. Since the left and right stand are identical the print file only contains one. Simply print two for a full set. Displays keyboards at a 60 degree angle Supports keyboards with up to a 2.5cm…
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
A basic case for the corne , with added hexagonal holes in the bottom to make it lighter and faster to print while allowing the PCB underglow to shine a little better. The mouting holes are in the standard position. The holes may be…
Please check out the assembly tutorial for this project: Update 10/31/2022: Added ISO layout plate version. This keyboard is a revision of a 3D printed Keyboard originally designed my Thingiverse user Fumbucker:…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
KEYBOARD OR TABLET STAND 14 Sept 2024 - New design available :- Desktop Tablet Stand and Organiser by Peter Martin | Download free STL model | Printables.com Decided to design a keyboard stand, a few iterations later this is the result. I…
Stand to display your custom mechanical keyboards. Purchase printed design on my Etsy store: https://www.etsy.com/listing/1227533573/custom-keyboard-stand-colors-in
This is my take on the holy60 case from kbdfans. I wanted to build a keyboard with this case but thought the price was pretty high. So, I thought I could recreate it to be 3d printable. The main CAD file is unsplit, but to fit on most…
A rework of the Skadis 40% Keyboard Stand to fit 75% and larger keyboards due to the original being too small for them and having them rest on the pegboard instead. Changed to a bit more rounded aesthetic and an inclination of 10%. Use…
Hi I made adictive FIDGET KEYBOARD !! NO SUPPORT NEEDED!!! ITS Fully 3D PRINTED !! NO MECHANICAL PARTS NEEDED!!! The Lube or oil are optional you can use oil from your printer!l!! You can little bit stretch the spring for more resistance…
I wanted a wall mount set for my mechanical keyboards to: get them off my desk, display them for all to see, fill in some very sad open space on my wall. I screwed them into the wall with 1 1/2 in drywall screws, that's it. They're…
Description Keyboard stand, with an optimal ergonomic angle design, very comfortable for long-term use without wrist pain. Keyboard Stand with Upright Mode — Significantly Saves Desk Space Dual-Mode Keyboard Stand (Vertical & Horizontal)…
This print allows you to put cherry profile keycaps onto a membrane keyboard. There are two files, one with and one without the “nub”. The mechanical keyboard I have, Razer Ornata Chroma, has a mechanical aspect to it, so the nub is…
I designed this set of wrist rests for your Keyboard and Mouse. The keyboard wrist rest is designed as a split pair. I tend to swap out my keyboards between several different styles (standard, split, Alice, etc.) so having a wrist rest…
Generated main body using https://www.thingiverse.com/thing:4120804 and then modified the design to turn it into a keychain.
The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…
Keyboard Switch Fidget V2 — Bigger, Better, Quieter to print The satisfying clicky fidget is back, rebuilt from scratch. If you've seen (or printed) the original Keyboard Switch Fidget , you know the concept: a palm-sized 3D printed body…
Remix of the original model so the key cap can fit gateron stem types
I created a slanted keyboard stand aimed at reducing the stress associated with keyboard input tasks. Using this model, you can achieve an approximate 22° incline for your keyboard. Personally, I have found it increases comfort. Both…
This is just a simple keychain where you can place your mechanical keyboard switch. I use it to fidget sometimes. I made this using Fusion 360. Edit 2022 April 26: Fixed the 1slot keychain for being too loose. Edit 2024 April 28: Added 3…
I designed this 3D printable swing-out keyboard tray support to make the Logitech MX Mechanical Keyboard easier to position and access, especially for users who may have difficulty reaching a keyboard placed on top of a desk. The…
Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Sleepy Snorlax-themed keycap. Compatible with MX…
Was absolutely stunned by @Druz320 Canoe inspired SMOLBOAT case. I had to have it...but it was for ortho keyboards, too large to print, and I wanted to use my teensy mount as well as other things I learned from my previous keyboards.…
This is a great fidget toy for all ages just print this model and grab some keyboard switches and Keycaps (printable) and start to enjoy. A great gift for travelers as it can be used as a keychain.
The model is a simple, pleasant to hold ring. It's designed to hold a mechanical keyboard switch, giving flexibility in clicky-ness and feel of the keycap (optional). It can be used to fidget with in many different ways, and is easy and…
Fidget toy using 6 keyboard mechanical switches. I tried Cherry and Gateron switches and both brand swiches fit perfectly. Printing with supports is recommend for best results. It can also be printed facing one of the cube corners on the…
The top eggshell will snap onto the top of the chick so it stays put while you have fun clicking! Fidget with or without the eggshell on top. Parts needed - MX Style Mechanical Keyboard switch Print with supports on auto, all in the…
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
More often than not I would find that my keyboard is taking up valuable desk space while painting. Finally got around to making this quick little under-desk mount so I can quickly tuck it away within arms reach when not needed. Currently…
The Keyboard Wrist Rest Type Comfy is a must-have for all typing enthusiasts. If your printer bed is too small to print the full rest, you can still enjoy its benefits by printing the sliced version in two parts. The dimensions of the…
As I'm sure everyone who's ever used a keyboard knows, the feet will eventually break. Or maybe I'm just a angry typist! ;-) Whelp, another keyboard and another broken foot. Not my fault this time, it came that way. Tired of making do and…
My Steelseries Apex keyboard recently lost one of its rear feet during a move, and Steelseries support doesn't sell or provide replacements. This is a model for a replacement foot that roughly matches the stock foot – it's not an exact…
Always wanted a nice custom lube station to go with your premium mechanical keyboard? No money for the next GMK group buy? Why not brighten up your lubing chores with a lube rectangle you can really call your own. Or just showcase your…
Keyboard feet for logitech k270 Printed in PLA
If you love fidget toys and keyboards, just one of those things, or simply want something quick to finish your filament spool, this is the model for you. I designed this fidget switch toy that only needs 1 to 3 mechanical keyboard…
Simple keyboard stand. Helps a lot with the lack of space on the desk. It's meant to level up the keyboard so it could go over the monitor stand. Can be easily printed flat without the supports.
This spring is intended to replace a keyboard switch in any of my keyboard switch fidget tappers! It does not click, so it would be a good substitute if you prefer a silent fidget (or of course if you don't want to purchase keyboard…
Mechanical keyboard version with the CS logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Resolution: 0.15 Infill: None Filament: Sunlu Pla+ White Category: Computer
