219 modeli
This tenting kit for the Keychron Q11 lets you attach wooden wrist rests to your keyboard for better ergonomics. To attach the wood pieces to the tenting kit, you need to drill some slots into them that match the pins on the printed…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
frame and wrist rest for Keychron K3 Pro. M3 nut 1 pcs, M3 8mm screw 1 pcs, rubber foot 4 pcs 60*10*3mm neodymium magnet 4 pcs. painter tape
Wydruk około 13,14 €–16,06 € nettoWstępna wycena jednego wariantu
I utilized a portion of BradleyM1's Keychron Knob Riser to make a standalone 15mm tall knob, for my Keychron K17 Max. It fits other keyboard models with a 6mm diameter stem. Top of knob sits about 16.6mm from top of case, a few mm higher…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
I designed this because I couldn't found any low-profile keycaps that would fit my Keychron K3. Print on a resin printer to get the best quality. I also added a version for filament printers with higher tolerances so it fits. I sliced it…
I made this model in Tinkercad nearly a year ago because I rage quit on my keyboard and broke the feet lol. I'm uploading this model now because I looked up on google to see if anyone has yet to make a decent 3D Printed replacement foot…
Tested on K3 Pro, this keycap should match any Keychron Low-Profile Pro keyboards. Non-Pro keycaps are a little bit smaller. For best results, print front (user-facing) side down. No supports were needed in my case
A tenting kit for the Keychron Q11 split keyboard. Designed to be a snug fit, the holes in the model align with the factory feet on my keyboard to keep it in place - no disassembly required. There are two 3mf files: One for a 25-degree…
A keycap for Keychron K3 with Darth Vader mask
Perfect if you want to display your keyboard, or if you like to change between two or more keyboards. Print two brackets per keyboard. I printed mine in PLA, with supports for the holes. Needs two screws per bracket.
Knob should fit on any EC11 encoder with a splined shaft. STEP files of the plain knob is available if you need to modify it to fit your encoder. I printed mine in TPU because that was the only matching color I had on hand, but should…
I added an OLED module to my Keychron Q6. Since it is using QMK, it is easy to customize it. I added a guide as a PDF that should have all the necessary information to build one yourself.
This KeyChron replacement Knob is a perfect fit if printed on a well tuned machine. If your printer is a little sloppy you might need to scale it up slightly. I print these top down but you can certainly flip it and print with supports if…
Designed to perfectly fit the Keychron K10 full size keyboard. This model is split into three parts so it can be printed on most printers. Orient the parts on their ends to ensure a smooth wrist-resting surface. I'd recommend supports for…
For a few years now, I've wanted to design a 3D printable keyboard case… Now, with the XL I finally have the build volume to manage it! I designed this fully 3D printable case as a replacement for the basic one that comes with the…
Fingertip Mouse Mod – Optimized for FDM Printing Since FDM printers are most common, this print takes layer orientation into consideration and uses a slot-channel system for the main clicks to prevent any layer weaknesses which inherently…
I wanted a keyboard cover similar to the one I already have for my k2 pro. Found one design but I didn't like the idea of the latches, so I modified it. Printed perfectly on first try with Bambu X1C with bambu pla sparkle material.…
This is a hard shell protective travel case for a Keychron K8 mechanical keyboard. Printed with 3 vertical walls and 10% infill in PLA with a .6mm nozzle. It uses a lot of plastic, so I recommend test printing only a 10-20mm slice of the…
I have recreated side frames for Keychron K2 HE Special Edition keyboard basing on wooden ones that came with keyboard. Made it mainly to change keyboard look, as I have replaced stock keycaps and got an idea that it will look great with…
Simple clip-on keyboard feet for the Keychron K1. It raises the back 13mm off the table surface. It's thin enough to fit between the two switches above the F1 keys. There's also a tab on the back to allow easier removal, since you can't…
I have designed a hand rest for my keychron v1 knob. For a nicer feel I glued the whole thing with 1mm cork and glued soft feet underneath. so you have a real hand flatterer :) For the gluing the following is needed: approx Din A4 large…
Wrist pads are remixed to fit Keychron Q8. Stands and connectors are new models. It can be modified using openScad. The right pad should be mirrored in the slicer if exported from openScad.
The Keychron Q6 does not have integrated feets to angle the keyboard. This model solves it. Print 2 of it, one for each side. The angle is 6.4 degree, meaning the back is raised about 1 cm. This model was inspired by this model:…
First version of a simple palm rest for Keychron K2. The concept works but model and design need optimization.
Post a make if you print, I would love to see it! Riser to raise the height of the original knob of any Keychron keyboard knob e.g. the popular Q1 75% keyboard, the entire Q series, Q pro series, V series with knob option, there's…
These simple supports allow a Keychron Q11 keyboard to be tented by placing them under the inboard edges of the two halves of the keyboard. There are two versions, one without wrist rests, and one with support for wrist rests. The wrist…
Keychron K2 case heavily based on one by OngXeno. I wanted it to fit more tightly so it doesn't slide off, and also be flat instead of curved.
Description A simple, easy to print case to keep your precious keyboard safe. Tested and actively used for the K3 as well as K3 Pro. Printing instructions Can be printed as is, without any support in your favourite layer height. For…
A simple smartphone holder for easy mounting and dismounting on the Keychron K8 keyboard. It may be that this holder also fits other Keychron K-series keyboards, but I can not verify this, because I currently only own the K8. I printed…
This thing - selfmade hotswap socket for handwiring keyboard on Gateron or Ketchron low profile switches. Support for optional RGB led (SK2812 mini) installation. I am used it for make Corne v3 - based Cornedion…
A remix of this model . Original was too slim for Keychron K3. Let me know if anyone wants the stl or step files.
Simple wrist rest design for Keychron K2. There are 2 version Single piece Split in half with joint I personally printed this split version since my Ender 3 can't print the whole thing at once. It took 5 hour for 0.3mm layer height. It…
This is just a basic model that fits the angles of the keyboard and can attach with 30mm long m3 screws in place of the 4 short m3 screws that run along the top of the back of the keyboard. You could adjust the depth of the screw hole if…
A simple remix on the Keychron K8 cover by Bert. Now designed for the K6. Printed with 5 perimeters and 45% infill in Esun PLA+ with .4mm nozzle and .2mm layer height on a Voron Trident 250. 6mm x 3mm magnets can be glued in to keep the…
For my Keychron K2 i needed a under desk mount which is artisan keycap friendly I saw the work from seb but it was in a wrong size, so I opened up Fusion and rebuild it from scratch based on his idea. I changed the measurements, give it a…
Print at 0.2mm layer height, any material.
This is an original Mod of the Keychron M4 Fingertip mouse with a width of around 51mm and the print weighs around 12 grams. I found the grip of the original M4 a bit too narrow because of the curve in shape. this design widens the sides…
This solid model was derived from Keychron’s Open Source Designs files and is intended as a printable shape tester for the Keychron M6 mouse. The printable outer solid STL was generated to the body shape of the mouse before buying it. The…
MX adapter to keychron K5 SE
Just a slide on case for protecting key switch while in the bag. This case is design for Keychron K2 Aluminum Frame version. It need the aluminum rail to lock onto the keyboard. I design the frame just 2mm thick, so it doesn't take too…
a simple cool looking knurled knob that i made for my Keychron Q15 as the first CAD project. hole diameters are 6 mm and 4.8 mm, don't know about other rotary encoders tho, but maybe compatible with others (?) printing recommendations ≤…
Keychron Q11 tented bottom parts. change to 7 degrees tented keyboard. each wrist rests are optional, if you need them. M2 6mm screws 18 pcs Neodymium magnet 3mm*10mm*60mm 4 pcs (for wrist rest) rubber foot 4 pcs ( if you want to print…
M2 8mm screw 12pcs robber foot 8pcs I remade my design and reduced volume and print time. No need to remove Q11's bottom plate. they become more simple and easy assemble parts.
This model is extremely simple print that you can attach to your Keychron K5 aluminium keyboard with just friction push-in in order to make the it raised a little bit higher. Fusion 360 and STEP files available if you want to customize if…
This is a low profile keycap set for the Keychron K8 (Pro) or other MX style keyboards with the NEO2 layout. The file provided is a Prusa Slicer Multi-Plate Project for the MMU3 and ideally printed with a 0.2mm nozzle. I didn't include…
This is a simple 18m high wrist rest I designed to fit my Keychron V1, however, it should work well with any 75% or ten-keyless layout keyboard. I designed this wrist rest to have a more squared-profile, so your wrists sit higher relative…
Vertical Dock / Charging Dock / Nightstand for Keychron K2 There is cut out slot for cable. This slot height is not high enough for plug-in directly. 90 degree type-c adapter or 90 degree type-c cable is required. It can be hot-glue in…
Wrist rest / Palm rest for Keychron k4v2. Prints in 2 parts so it can fit on non massive printers (each piece is 192mm long Orientation : would recommend either printing upside down or standing up on its end depending on the texture you…
As you know Keychron K1, the slim mechanical keyboard, has no feet so it stays flat on your desk. Not a pleasure to use at the original angle. So these are feet for Keychron K1. They raise the keyboard up about 10 degrees. Print and…
I printed with a brim in multiple different orientations and I'll update this with results. Edit: I realized I put the design upside down 🙃 I will update soon
A 3D printer-friendly keyboard wrist rest. It is both portable and rigid. it is precisely 327mm wide to match many keyboards, such as the Keychron Q2, Q2 Pro and Q2 max. Each part can be printed together in a single print, and, whilst not…
neodymium magnet 60*10*3mm 8pcs The magnet I bought was slightly smaller than spec and I put thin painter tape on each side to fit in square cavity. These magnets can connect with frames or Q11 directly and steady. rubber foot 24 pcs…
Useful if you own multiple keyboards, you like to switch between them often, and you like displaying them! Made for the Keychron K6 (65%), but it will fit any keyboard that is ~10 cm tall/deep (you can adjust the size in the slicer or use…
Middle frame 3D print for Keychron Q1. Use this to add/suplement the force-break mod, increase space beneath PCB to increase sound resonance, or to add color accent to the board to match keycap colorway This model also is compatible with…
Quick remix so that your Q1 v1 can have a knob without empty space. Added a version with smaller hole diameter.
This function keycap is designed to prevent accidental key presses from the front of the key. Compatible with keychron Low-Profile Optical switches. Remake of Anti-Accidental Keypress Function Key -…
This is a remix of @PaulGrimes_855599 's tenting base for the Keychron Q11 split keyboard. This design is set up for Keychron's own wooden palm rest but it should work fine with many others too. Some problems I had with the original and…
Mount your Ipad to the Keychron K6.The adapters are standing on the ground for more stability. Angle of the keyboard is a little steeper with this setup. Should work with all newer iPads. Hardware Keyboard Ipad Ipad Case transparent PETG…
A very basic replacement but it does its job properly with a fairly quick print resulting in a strong piece. This replacement does not have two positions like the original as the lower position seemed too small to me. It fits snugly, if…
Wanted a custom keycap for my new Keychron K3. I modeled this corgi and combined it into the keycap built by Geppedo. Fit: I had to do extensive cleanup to get it to fit the switches, not sure if that was my printer or what. I think the…
Print two of these. The holes on the top let the built in feet recess and hold the keyboard steadily in the stand. The model marked Rubber has a 1mm inset to put in up to 10mm rubber feet if you don't want it to slide. I printed with…
Remixed from @derekyle_481832. These are feet that attach to the bottom of the keychron Q6 max (and maybe other models) to give it a bit of lift. I really liked the original but it was too steep for MOA keycaps. Requires 4 M3x25mm socket…
I wanted to have a golden accent line in the seam between the parts, but both parts were of different lengths, and I did not like that.
The Keychron K2 HE (special edition) has wood trims on the sides. I want to create storage space for the USB dongle, this is step 1; recreating the trims. Edited on Jan 22 after feedback from Drazor; my models were 127 mm long, whereas…
Keychron K series Replacement Foot
The palmrest is slightly higher than the front body of the Keychron K2 keyboard (22mm overall height). I've been using it for a while and it is really comfortable to type on. I've printed it in PLA, maybe it gets even more comfy with TPU.…
I printed with DevilDesign Petg but you can use almost any material. Also printed in standing orientation but you don't need support to print the upper claw.
Since the Keychron Q1 was a bit too high for me, I rebuilt the bottom case with a lower profile. To make it printable on a normal sized printer, I split the case in two parts. In the v1 I added dovetails and a slight clearance to the two…
I made this for my Keychron K8, but I'm pretty sure you could use it for any other similar keyboards. Add adhesive foam pads on the bottom to add friction and adjust the rest to your ideal height.
Modified the original to fit the Keychron K3. Included two different heights, 15mm and 18mm.
I tried a few other tenting kits and mashed together the things I liked about them into a single model then made some mods. I took the general design of this model:…
3D printable model for the Keychron Q2 Pro (and others) volume knob. Other 3D printable files exist but do not work with the keyboards properly (wrong size, fit, etc.). This is a complete redesign to correct these errors. This enables…
Keychron M6 is a great mouse, but it's a bit too small for my hand. my pinky finger can't rest on the mouse as there is no space left. So i created this design based on the 2d sketch in the manual book. This still need some minor…
Keychron K7 is one of the lightest 65% mechanical keyboards out there, so I wanted a way to carry it safely in my backpack/luggage without adding too much weight. The result is this 0.6mm-wall vase mode case that only weighs 59 grams .…
Keyboard case modeled to be compatible with the Keychron K10 pro wireless https://cad.onshape.com/documents/5fc32454a189528911ecf189/w/cad0c257882af02f0be269fa/e/e3cf7c916934e5fdda0deab8 Machined from acrylic total cost was 800 USD for…
Based on the great model from leejsmith, this one is customized for the Keychron K8 keyboard and adds a Zaparoo reader. It needs printing supports for the card reader interior. It includes also an option without card reader. Update 2025 :…
NackHabitat #0087 - Keychron Q8 Max Wrist Wrest For printing whole or dovetail yourself: Part A - 0087pAv1_Keychron Q8 Max Wrist Rest, Whole (3.6.2025) For printing in halves, pre-dovetailed: Part B - 0087pBv1_Keychron Q8 Max Wrist Rest,…
This is a slide on transport case for the Keychron V1 (Knob and non-Knob). Inspired by a case for the Logitech MX Master 3(S) https://www.printables.com/model/213059-logitech-mx-master-3-case The case is very slim and light. All outer…
I was making case design for this keyboard, and accidentally make a model of the keyboard itself in the process. Hope this make it easier for someone to design something for Keychron K2 in the future. Category: Models
Wall mount for the Keychron K8 keyboard. Mount directly to the wall or to HSW (Honeycomb Storage Wall). To mount to HSW, you need M3 inserts. May also work with other keyboards with similar dimensions. Print settings Print lying on its…
Large wrist rest for Keychron keyboard Q8 and Q10. You can put magic trackpad on the center of this wrist rest, but if you don't have magic trackpad or wouldn't put it on the wrist rest, I prepared dummy trackpad parts. The wist rest has…
I kept hitting these side buttons on accident and don't use them anyway. Decided to pull out the switches and just turn them into a light feature. I used natural PLA which shines light through. The fit is meh, I have broken a couple of…
left part, right part and center clips needs to put the joiner bars (wood or something) on front and back outside without keyboard foots, bluetooth, and easy switching Win-Mac I gave up the battery space for bluetooth.
Just a slide on case for protecting key switch while in the bag designed by OngXeno(https://www.thingiverse.com/thing:4298507). This case is design for Keychron K2 Aluminum Frame version. It need the aluminum rail to lock onto the…
description the keychron q11 keyboard comes with a ~2.8 degree positive tilt and can be purchased with matching wrist rests. i switched to this keyboard from a 0 degree tilt keyboard and could really feel the difference, and didn't like…
This is a keyboard case + stand for the Keychron K1. The nub that locks the two pieces together are a little loose, but still works. In stand-mode, the K1's rubber feet hold them nicely in place via friction. The cover doesn't hold…
Little adapter for attaching a GMMK pro knob to keychron keyboards the D-shaped hole on the GMMK knob is just barely too high to fit on keychron keyboards, so by gluing this inside the knob to “extend” the hole, it attaches fine to the…
After considering purchasing switch pads for my Keychron Q1, I reverse-engineered these thin sheets to sit between the PCB and EVA foam in the PCB-Plate assembly. They alter the sound of the keyboard by dampening out some of the higher…
A rod for a Keychron aviator cable
After posting my tenting kit for the Keychron Q11 here, someone reached out to me asking about a kit for achieving negative tilt. Although it's not really working for me ergonomically I hope this model helps someone with specific…
V2: Passthrough design so the SpaceMouse has grip directly on the desk, no need to add anti-slip pad to the 3Deck. V1: No passthrough, the SpaceMouse sits directly on the 3Deck, you have to add anti-slip pads under the 3Deck so it doesn't…
I redesigned my data again, adjust magic trackpad position and removed each side projection.
Remix of this: https://www.printables.com/model/489009-hsw-rk61-keyboard-holder Intended for the Keychron K4, but no reason other keyboards won't also fit if the width was the same/very similar. Both side pegs are identical so you'd need…
I didn't like the wood finish on my Keychron K2 HE so i decided to model my own. I added fuzzy texture to mine and it looks pretty cool. Printing on the powder coat sheet leaves a nice finish on matte PLA. I printed mine in PLA with 3…
Printable sides for a keyboard cover for the Keychron K1. Glue a 120mm x 355mm 2mm Acrylic sheet into the groove. My version printed on Prusa I3MK3S 6mm nozzle, 0.3mm layer height.
This is a top plate designed to fill the gap on the keychron k8 pro mechanical keyboard. I'll update the model a few more iterations. I'm having good success with my neptune 3 pro and these settings 0.16mm layer height 20% infill Support…
I wanted to make a nice accent-line down the middle of the print, but the left and right parts where of different sizes. So I pulled a fast one and fixed it in the slicer and exported them as STLs.
Printable middle frame for Keychron Q10 Use to supplement forcebreak mod, increase space in the case to improve resonance, use as an accent piece to match keycap colorways.
This is a Keychron K10 wrist ramp I designed. you use 4 velcro command strips to hold it in place. 2 go on the keyboard and 2 go on the wrist ramp. I printed this on my Creality cr-30 belt printer. I plan on adjusting the fit with the…
CherryMX keys for the Keychron V5C1 top row. Sleep Mute Snip Task Manager
