Wyniki wyszukiwania: l1

Sortowanie

728 modeli

P
PrintablesArea51

Prusa SL1/S Speed Platform Drip Adapter

Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…

Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
859
Polubienia
74
Ocena
4,97
P
PrintablesArea51

Tank Cover for Prusa SL1

Simple cover for your Prusa SL1 tank protecting resin and display from damage. Fits between tank screws, without removing them. The cover is easy to keep clean and protects the resin from UV-light is printed in a black filament. Looking…

Wydruk około 2,90 €–3,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
341
Polubienia
22
Ocena
4,93
P
PrintablesArea51

Tank Cover for Prusa SL1S Speed

Simple cover for your Prusa SL1S Speed tank protecting resin and display from damage. Fits between tank screws, without removing them. The cover is easy to keep clean and protects the resin from UV-light is printed in a black filament.…

Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
278
Polubienia
24
Ocena
5
P
PrintablesAA

Prusa SL1S Speed Tank Cover

Prusa SL1S Speed ​​Tank Cover for use with mounted tank screws Prusa SL1S Speed ​​Tank Abdeckung zur Verwendung mit montierten Tank Schrauben

Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu

Pobrania
254
Polubienia
27
Ocena
5
P
Printablesneil3dprints

CL4P SL1 (Prusa Mate)

Continuing with the Prusa mate series, I was Inspired by Mikolas Zuza's talking ClapTrap remix of Chaoscoretech's ClapTrap design. This design isn't a remix. Introducing the CL4P SL1. A unique combination of Borderlands ClapTrap and the…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
222
Polubienia
128
Ocena
5

SL1 Platform Holder

EDIT: I have redesigned after getting some excellent feedback. V5 Part A and Part B are below. I have designed a build platform holder for the SL1 because I am lazy. It works with low to mid sized models - taller models will still need…

Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu

Pobrania
175
Polubienia
13
Ocena
4,5
P
Printableshangr.

Filter hose adapter for SL1

Simple SL1 Hose adapter for 40mm ID hose. Also included step file for modification. For correct usage, remove the original filter and use with your own strong exhaust system.

Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
155
Polubienia
5
Ocena
5
P
PrintablesArea51

ClipOn Handle for SL1/S Speed Platform V2

Other versions: 27.03.2022: ClipOn Handle for SL1/S Speed Platform V3 29.07.2021: ClipOn Handle for SL1/S Speed Platform Handling the build platform full of resin can be messy or unsafe if it is dropped - worse if dropped into the tank or…

Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
154
Polubienia
23
Ocena
4,89
P
PrintablesKeril_v_kube

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
151
Polubienia
7
Ocena
0

Prusa SL1S Tank Drainer

Introduction: Draining your resin tanks after use is good practice, but we often don't do it out of inconvenience. This simple device makes it very easy, simply leave your tank and bottle on and let gravity do the rest of the work! In our…

Wydruk około 4,50 €–5,50 € nettoWstępna wycena jednego wariantu

Pobrania
140
Polubienia
37
Ocena
5
P
PrintablesArea51

ClipOn Handle for SL1/S Speed Platform

Other versions: 27.03.2022: ClipOn Handle for SL1/S Speed Platform V3 22.10.2021: ClipOn Handle for SL1/S Speed Platform V2 Working with resin printing on the Prusa SL1/SL1S can be messy and unsafe if the build platform is dropped when…

Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
106
Polubienia
15
Ocena
0

SL1 - Resin Tank - Holder

I have made holder for my resin tank, I usually change the tanks often and I needed a holder not to damage the the FEP Film. You can add also the screws if you want, It wont hold the tank in place . Print instructions Printer Brand: Prusa…

Wydruk około 4,37 €–5,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
100
Polubienia
13
Ocena
5

SL1 Vat Drip Wall Mate

Wall mountable holder for the SL1 vat. Print instructions 10% infill .2 resolution No Brim or supports required.

Wydruk około 5,80 €–7,09 € nettoWstępna wycena jednego wariantu

Pobrania
94
Polubienia
10
Ocena
5
P
PrintablesJirkaDe

tall battery cover for Nikon EN-EL15

A cover for protecting a spare Nikon EN-EL15 (or compatible) battery based on a great cover by @PiJey_88387 enhanced to also cover a USB-C charging connector found on a Jupio EN-EL15C ULTRA C battery. Printed in PETG with 0.2mm layer…

Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
90
Polubienia
10
Ocena
0
P
Printablesncsandor

Prusa SL1S Vat Holder

A resin vat tower that can be mounted on a wall or simply placed on a table (if you have secured it properly and accidental tipping cannot occur.). Attention! Prusa says to pour the resin back into the bottle after each print, if you want…

Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
72
Polubienia
20
Ocena
5

Cool SL1 Vat Cover

Cool SL1 vat cover when you have the lid up servicing the printer. No need to remove the screws. Halves overlap to block the light. Print instructions Standard print. Gcode is poor mans multi colour (pause and change filament) :)

Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu

Pobrania
67
Polubienia
8
Ocena
5
P
PrintablesAdam Staes

nRF54L15 DK case

A slim case for the nRF54L15 development kit board. The case features a snug fit (you may need to trim any PCB assembly tabs/nibs for a perfect seat) and is secured using screws and heat set threaded inserts. There are three backplate…

Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu

Pobrania
60
Polubienia
4
Ocena
0

SL1 Resin Spill Tray Replacement

I found the supplied tray very hard to insert and remove. It was a bit noisy at night when you are creeping around trying not to wake the better half. Update: Thanks to John Driggers on Facebook I have modified the design to include a lip…

Wydruk około 6,92 €–8,45 € nettoWstępna wycena jednego wariantu

Pobrania
57
Polubienia
5
Ocena
0
P
PrintablesEvaMika

Prusa SL1(S) Charcoal Filter

Carcoal filter to use charcoal pellets. Gcode files for prusa mini, mk3s, mk4 and XL. you can meke your own settings if you use other printers: add box modifier in the center of the main filter body and the lid, and choose top and bottom…

Wydruk około 1,27 €–1,56 € nettoWstępna wycena jednego wariantu

Pobrania
54
Polubienia
9
Ocena
0
P
PrintablesJPMakesStuff

Outdoor venting for SL1S

These are parts to connect another inline fan to 2" PVC for venting the SL1S printer. Connection should look like this… SL1S printer > Fan mounting backplate for SL1S into… "SL1S fan gate adapter.stl" ( see files section ) into… a 2" flex…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
52
Polubienia
18
Ocena
0
P
PrintablesPit70

Arbeitsplattform für den SL1S

Wer kennt es nicht, nach einem erfolgreichem Druck müssen die Teile von der Plattform. Dieses Tol erleichtert einem das Abeiten um einiges, überschüssiges Material wird aufgefangen und kann wiederverwendet werden. Teile landen im…

Wydruk około 25,38 €–31,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
51
Polubienia
1
Ocena
0
P
PrintablesInsaneDruid

Monitor opening tool for IBM 8513 CRT and IBM 14L10/15L10 CRT (Aptiva)

Small tool designed to open the internal case clips on IBM 14L10/15L10 (Aptiva) and similar Monitors. These clips can only be reached through a small vertical opening (see image1). Just insert the tool through these openings, making sure…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesJan Kurek

Turn Signals Indicator Adapter Suzuki DL1000 (2014-2019)

CZ Adaptér pro montáž univerzálních směrových LED světel https://www.aliexpress.com/item/32880546232.html?spm=a2g0s.12269583.0.0.633e42a744FoPJ ). Montážní adaptéry se dají také koupit, ale na DL1000 2014 > neapasují (i když prodejci…

Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
3
Ocena
0
P
Printableskennyd1gital

Nitecore NL1416R Battery Case

A simple case to protect your spare Nitecore NL1416R battery when it's rattling around in the bottom of your bag while it's not in use. Cap comes on and off with a satisfying “pop!” Print with the open ends of the case and cap facing up.…

Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
39
Polubienia
1
Ocena
0
P
Printablesrotto

SL1S Ventilation System

I received my SL1S a few weeks ago and love it. The fumes from the resins, however, are too much for my indoor office. Opening the window is not enough and actually spreads the odor throughout the house. I looked around for a venting…

Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
38
Polubienia
11
Ocena
0
P
PrintablesJPMakesStuff

Fan mounting backplate for SL1S

I am venting my printer directly outside, so I did not want the charcoal filter impeding airflow. This plate holds the 60mm fan alone (you need to use your own screws) I then have another attachment that allows for a 2" flexible tube to…

Wydruk około 1,08 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesRealPrint

Hook for Ortlieb QL1 on a MIK luggage carrier / Haken für Ortlieb QL1 an einem MIK Gepäckträger

Die Original-Haken sind zu hoch, wenn man zusätzlich ein Topcase mit MIK (2.0) Halter auf einem MIK Gepäckträger befestigen möchte. Diese Haken ermöglichen das. Zusätzlich ein Haken für den größeren Durchmesser unten. The original hooks…

Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu

Pobrania
10
Polubienia
4
Ocena
0
P
Printablestomasjuri

Decathlon SL110 mount under Garmin

I designed a mount for a cheap Decathlon SL110 light that mounts right under the Garmin holder using 2 screws. Print in PETG or PLA. Don't use supports for the side where the light clips in. It will lower the print's precision, and the…

Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesPrusa Research

Original Prusa SL1 Test Object

This is one of the sample objects bundled with the Original Prusa SL1 3D printer designed to test whether your printer works correctly. Model by Michal Fanta, used with permission

Pobrania
9070
Polubienia
309
Ocena
4,84
P
PrintablesPrusa Research

SL1 Resin Calibration Object

This is one of the sample objects bundled with the Original Prusa SL1 3D printer designed to test whether your printer works correctly. Print instructions Complete guide, how to do SL1 resin calibration Model by Michal Fanta, used with…

Pobrania
3958
Polubienia
103
Ocena
4,89
P
PrintablesSeeed Studio

Wio Tracker L1 Pro for Meshtastic Enclosure Casing

The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 Pro version is a fully integrated,…

Pobrania
1687
Polubienia
144
Ocena
3
P
PrintablesPrusa Research

Original Prusa SL1S Test Object

This is one of the sample objects bundled with the Original Prusa SL1S SPEED 3D printer designed to test whether your printer works correctly. Model by Michal Fanta, used with permission

Pobrania
1407
Polubienia
114
Ocena
5
P
Printablesrogerquin

Travel Case for Henson AL13 Safety Razor

The professionally designed travel/storage case for the Henson AL13 safety razor is a sleek and innovative solution for safely transporting and storing your razor and blades. Designed with precision and attention to detail, this…

Pobrania
1146
Polubienia
179
Ocena
5
P
Printablesakf_was_here

PS4 L1 / R1 Buttons

My buddies dog ate his L1 button out of his PS4 Controller and this is what I came up as a replacement. Highly recommend printing in the orientation I've got them in even though it'll require lots of supports because otherwise some of the…

Pobrania
1121
Polubienia
44
Ocena
0
P
PrintablesMichal Fanta

Original Prusa SL1 Calibration test object

The calibration test object for resin 3D printers. Print instructions Printable without supports.

Pobrania
1088
Polubienia
70
Ocena
5
P
PrintablesPrusa Research

SL1S SPEED resin sample box prints

Printable files for the objects from the resin sample print box . See the link above for more info about the actual sample prints.

Pobrania
787
Polubienia
93
Ocena
5
P
Printableszeropt

Seeed Wio Tracker L1 E-ink Enclosure

This is a custom case for the Wio Tracker L1 E-ink kit from Seeedstudio . The e-ink display that comes with the board is somewhat large but I tried to get the enclosure as pocket-able as possible. I uploaded two versions of the front with…

Pobrania
781
Polubienia
119
Ocena
4,92
P
PrintablesYZC DESIGN

Mercedes - Roadster1960 SL190

This is a replica model for Mercedes Roadster 1960 (WIP). I'm not sure if it is possible to connect pins & tires to main since the body has fender skirt. Please feedback. update01 : I've added main body parts one by one for remix editors.…

Pobrania
729
Polubienia
84
Ocena
3
P
Printablesjq910

Case for Wio Tracker L1 + Meshnology 3000mah battery

This is a case for the Wio Tracker L1 from Seeed Studio which can fit the Meshnology 3000mah 755060 battery. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Update 6/12/2026: Added step…

Pobrania
722
Polubienia
103
Ocena
4,86
P
Printablesmaggoh

Time-of-Flight Case ESP32 C3 Super Mini + VL53L1X Time-of-Flight (ToF) ranging sensor for smart home

Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…

Pobrania
693
Polubienia
76
Ocena
5
P
PrintablesMartin

1 & 2 Nikon EN-EL15 Battery Protection Case

1 & 2 Nikon EN-EL15 Battery Protection Case

Pobrania
656
Polubienia
57
Ocena
5
P
Printablesarnlux3D

Talaria Sting L1E - Break Light relocation bracket V3

Update 02.07.2024 - V3 Model with no blinkers. I saw that there were a couple of request regarding a model with no blinkers, new model added ;) Update 28.06.2024 - V3 model released! Updated the design so its easier to install the lid.…

Pobrania
652
Polubienia
31
Ocena
4
P
PrintablesLomax1983

WAGO221 holder L1,L2,L3,N,PE

A holder for the WAGO221 with labels L1, L2, L3, N, and PE. The holder mounts with M5 screws. An additional model of the holder is available without labels. The Wago fits snugly, requiring a slight pry to remove. I printed at a 0.16mm…

Pobrania
632
Polubienia
76
Ocena
5
P
PrintablesYaron

Bosch Charger AL1830CV Wall Mount

Wall mount bracket for the Bosch 18V charger model AL1830CV. Print it on its side to ensure it is more flexible and durable. PETG is better for this use case, but PLA should be good enough.

Pobrania
605
Polubienia
59
Ocena
5
P
Printablesaustin g

Wio Tracker L1 Pro PLUS case

Similar to the stock case with the following changes Optimized for FDM printing cover prints facedown with no supports longer body with room for 3000mah battery requires 2mm heat set thread inserts added place for 2.5mm heat set thread…

Pobrania
599
Polubienia
71
Ocena
4,8
P
PrintablesPiJey

Battery Cover For Nikon EN-EL15

Battery Cover For Nikon EN-EL15 Motivation For some reason I tend to lose the battery covers of my EN-EL15 Batteries. Therefore I designed a replacement. It was also a Test for printing with (semi-) flexible material on my i3 MK3. In the…

Pobrania
591
Polubienia
53
Ocena
4,79
P
PrintablesMichal Fanta

Mechanical Curved Switching Track - L1

Double-sided mechanical curved switching track compatible with BRIO and IKEA wooden rails. Printable in place without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini…

Pobrania
565
Polubienia
68
Ocena
5

Dualshock 4 / PS4 Controller L1 and R1 Button Replacements

These are flat replacement L1 and R1 buttons for the first gen PS4 controller (CUH-ZCT1). The buttons are not modeled to be exact replacements, they are flat and chamfered on the front, both as I wanted something that was a bit nicer to…

Pobrania
521
Polubienia
32
Ocena
0
P
PrintablesMade Wisely

Makita 18V Battery Pack Holder (BL1860B v2) Replica

Description: Welcome to my 3D model of a Makita 18V Battery Pack Holder, tailored specifically for the Makita BL1860B v2 battery! This model has been meticulously designed to offer a perfect replica for those who need an extra holder or…

Pobrania
509
Polubienia
54
Ocena
5
P
Printablestaiguy

Henson AL13 Safety Razor Blade Guard Travel Cover

Simple blade guard that slips over your Henson AL13 safety razor so you can throw it in you dopp kit (toiletry bag) without worrying about inadvertently cutting things or damaging the blade. There are drain holes in the bottom to keep…

Pobrania
473
Polubienia
66
Ocena
4,8
P
PrintablesPrusa Research

SL1S SPEED Printable parts

Printable parts for your SL1S SPEED printer. Print instructions PrusaSlicer's default PETG 0.2mm presets. For the CENTERING PIN SL1S_SLA part, we recommend printing it with Prusament tough resin.

Pobrania
436
Polubienia
45
Ocena
0
P
Printablesmochr

L13 Blanik airglider

Model Blaniku L13 - NElítá Model of L13 Blanik - no flight

Pobrania
420
Polubienia
80
Ocena
5
P
PrintablesNoktious

Shaving Stand - Henson AL13 - Safety Razor

A simple stand for the Henson Shaving AL13 safety razor with a spot for a pack of blades and a sharps disposal box; which can be found here: https://www.printables.com/model/779604-safety-razor-blades-sharps-disposal-box I will probably…

Pobrania
407
Polubienia
75
Ocena
5
P
Printablesbonzai000

81mm Mortar L16

This is a simple model of an 81mm Mortar, L16. Prints fairly well in a larger size with FDM, not much needed in the way of supports. Enjoy Category: Props

Pobrania
396
Polubienia
25
Ocena
5
P
PrintablesRacer04

Henson AL13 (travel) case

I didn't have a travel case for my AL13, and there were only some around that I weren't fully happy with, so I thought, Why not design and print one myself :D ? This model is print-in-place, as I wanted to try it to improve my skills.…

Pobrania
388
Polubienia
76
Ocena
4,57
P
PrintablesRay J

Seeed Studio Wio Tracker L1 Pro Buttons

Make sure that after printing the holes in the joystick and back button are cleaned up so they sit properly. https://youtu.be/DMV8aHCts8Q

Pobrania
381
Polubienia
33
Ocena
4
P
PrintablesSamK3D

Surefire HL1 helmet light mount

Adapter mount for Surefire HL1 helmet lights. Current screw holes are configured for Ops-Core ARC Wing-Loc rail adapter (20-98-103) but use the .step file to adjust hole size and position to suit your mounting requirements. Tolerances in…

Pobrania
380
Polubienia
27
Ocena
0
P
Printablesfunction.3d

Kingroon KPL1 mods

Kingroon KPL1 mods

Pobrania
367
Polubienia
30
Ocena
5
P
PrintablesChica BOMB

Nikon EN-EL15 battery holder

a battery holder for nikon en-el15 batteries

Pobrania
365
Polubienia
28
Ocena
4,5
P
PrintablesPrusa Research

SL1 Printable parts

All printable parts for your Original Prusa SL1 resin printer. The SL1-IR_HOLDER_SHEET comes pre-installed on the optical sensor . Files are also available on Prusa3D Github , including the not user-replaceable parts. Print instructions…

Pobrania
361
Polubienia
35
Ocena
4
P
Printables404

'Actuator' SBL1 Priming Grip

Introducing the Actuator priming foregrip! This grip was designed to fit flush on the priming block of the SBL1, but should work as a priming grip or foregrip for many other blasters with picatinny bottom rails. This grip should print…

Pobrania
357
Polubienia
52
Ocena
5
P
PrintablesminiShev

Portal1

Phone-animated portal for tabletop RPGs and six different portal's animations !!! Large parts to print, requires a printer with sufficient working area dimensions. Fits butt into my 3D printer with dimensions of 130x80x165 mm. But it is…

Pobrania
346
Polubienia
160
Ocena
5
P
PrintablesDr Doom

Henson AL13 razor cover sleeve

The Henson AL13 is a great razor, but it does not come with any kind of protective cover. The blade remains exposed, so can easily be damaged when stored, especially in a bag with other toiletries. Similarly, leaving the blade exposed…

Pobrania
346
Polubienia
33
Ocena
5
P
PrintablesNiko

multiple sizes - Ortlieb QL1/ QL2 HOOK INSERTS pannier

These clips are ment for the Ortlieb panniers with the QL1 / QL2 klick system. https://www.ortlieb.com/de_en/ql1-ql2-hook-inserts The originale ones come in the sizes 8mm and 11mm to fit the Bike rack. These here are designed for Bike…

Pobrania
345
Polubienia
27
Ocena
4,5
P
PrintablesEpiales

Lumbar Vertebra (L1) Keychain – Anatomy Model | Medical Student / PT / Chiropractor Gift

A compact, detailed model of the L1 lumbar vertebra , designed as a small anatomy reference or unique medical-themed keychain. This model balances recognizable anatomical features with clean, support-free printing, making it ideal for…

Pobrania
329
Polubienia
40
Ocena
0
P
PrintablesMaks

Ключ для фильтров SL10 / Filter wrench SL10

Ключ нарисован, потому что потерялся комплектный, а покупать, это надо идти и искать незнамо где. Особенно, Москва - это “место где всё есть”. / The key is drawn, because the complete key is lost, but to buy it, you have to go and look…

Pobrania
319
Polubienia
15
Ocena
0
P
PrintablesAlley Cat

MeshPack Seeed L1 OLED

Commercial Use and Attribution Notice MeshPack © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under…

Pobrania
313
Polubienia
75
Ocena
5
P
PrintablesAlex

Noctua NH-L12s x Fractal Design Ridge Shroud for better CPU cooling

Easy to print shroud for NH-L12s to improve exhausting hot air OUT of the case. Print in ABS/ASA or other heat resistant material. Requires spacer under power supply cable in order to fit, for example THIS (tested). 2025/02/14 - I've…

Pobrania
311
Polubienia
23
Ocena
5
P
Printables45Drives

45Drives Homelab - HL15 - Spare Parts

Here are all of the 3D Printed parts that come stock on the 45Drives HL15 server. If you need spares, or want to print your own, go to town. We recommend using PETG with at least 20% infill for these parts. PLA will likely soften at…

Pobrania
310
Polubienia
39
Ocena
0
P
Printablesspontaniel

Nikon EL14a / EL14 Battery Case

Protect your precious Nikon batteries with this simple and “snappy” case! Printing Use the standard print settings in your favourite slicer. Make shure that “Minimum travel after retraction” (Prusa-Slicer) is set to 1 or lower I used eSun…

Pobrania
294
Polubienia
47
Ocena
4,8
P
PrintablesVincent Cordier

Funnel for Dreame l10s ultra

can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters. Make sure you use soap for robot cleaners. Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.…

Pobrania
285
Polubienia
50
Ocena
5
P
PrintablesDarazsweb

Radio Tray for FlySky Paladin PL18 rc transmitter

Update: Version 3 uploaded. For user request I have added 2 more screws at the arms to base connection, and enforced a little bit the arms. Setting the nuts in the slot for the lower screw will need patient.:) I have not printed this…

Pobrania
283
Polubienia
12
Ocena
0
P
PrintablesFrey

Seeed Wio Tracker L1 E-ink case 3000mAh Meshtastic

Modified the great case designed by zeropt to fit a 3000mAh Makerfocus battery (65x35x10mm). A M3x14mm screw is needed. I had no Onshape experience and I needed some time to figure it out and to appreciate the great design of zeropt.

Pobrania
276
Polubienia
44
Ocena
4,88
P
Printablesmco

L13 chest remix

made chest wider, so shoulders are wider for that superhero look.

Pobrania
276
Polubienia
45
Ocena
5
P
PrintablesARTME 3D

Original Filament Pelletizer PEL1.1 by ARTME 3D

The Original Filament Pelletizer PEL1.1 is a commercially certified complete kit from ARTME 3D ® . The kit comes with all the necessary components; only the 3D-printed parts need to be printed by the user. You can buy the necessary metal…

Pobrania
275
Polubienia
18
Ocena
5
P
Printables05_spezi

CL1P – Ultra-Lightweight Filament Clip (0.3 g)

CL1P is a minimalist filament clip designed to stay completely inside the spool without sticking out. Many filament clips extend beyond the spool and get in the way — this is exactly what CL1P avoids. With a material usage of only ~0.3 g…

Pobrania
274
Polubienia
69
Ocena
5
P
PrintablesRangler

Gridfinity: Nikon EN-EL15 Bin

This is a useful battery holder 3mf file that utilizes a dummy battery stl from wdwhite and a gridfinity 2x1 template by Zach Freedman I used it to clear up a stack I had. These are not stackable at the moment It's noted in the part…

Pobrania
273
Polubienia
32
Ocena
3,5

VL53l1X 400cm Lidar Module

Address change ;) https://learn.adafruit.com/adafruit-vl53l1x?view=all # SPDX-FileCopyrightText: 2022 wrdaigle for Adafruit Industries # SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries # # SPDX-License-Identifier: MIT…

Pobrania
269
Polubienia
4
Ocena
0
P
PrintablesDavid

SL1/SL1S Vat cleaning tool

A simple tool to help you 1. verify there are no print leftovers in the resin vat or stuck to the FEP foil. 2. filter out the possible chunks - sort of - without removing the vat from the printer. Just submerge the tool into the resin vat…

Pobrania
268
Polubienia
29
Ocena
5
P
PrintablesParagon

Makita BL1518N - Powiększenie Baterii 2x, 3x, 4x

Do pobrania moja wersja powiększonej baterii 2x, 3x i 4x względem wersji BL1518N do Makity, ja zrobiłem wersję 2x większą czyli 5s2p, dodaję 3 wersje tego adaptera do pobrania… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i…

Pobrania
267
Polubienia
20
Ocena
0
P
PrintablesArea51

Vat Storage Tray for SL1S

Where to put the vat when not on the printer? I made this simple tray to hold the vat/tank for the Prusa SL1S Speed printer. It will protect the FEP from damage and hold any spill from the vat if stored with resin (not recommended). The…

Pobrania
256
Polubienia
35
Ocena
5
P
Printableserffli

SEEED Wio Tracker L1 E-ink reference case (Made usable and upgraded) for 3000mah maker focus battery compact version

Upgraded SEEED Wio Tracker L1 E-ink made space for the maker focus 3000mah battery, and case made more compact, upgraded buttons, added a hook to the top, added supports to hold the screen. just a basic case note: its a different size…

Pobrania
253
Polubienia
25
Ocena
0
P
Printablesper-form-3d

PRUSA SL1S SPEED Abtropftrichter

Trichter zum Ablegen des Tanks direkt auf der Resin Flasche. Passt bei allen gängigen Flaschen. Auch das originale Sieb passt hinein.

Pobrania
253
Polubienia
36
Ocena
5
P
PrintablesJedla

Logo Goldwing GL1500

Logo Honda Goldwing GL1500

Pobrania
252
Polubienia
8
Ocena
5
P
PrintablesBekker

HP ProLiant ML150 G6 Drive tray 3.5" to 2.5" adapter

Adapter to fit 2.5" drives in the HP ProLiant ML150 G6 3.5" drive tray. Should also work for ML330, ML350, ML370. Confirmed by users: ML110 G7 Updates: 26 May 2019 - Added v3 of the adapter, just optimized it to use less plastic.

Pobrania
250
Polubienia
11
Ocena
5
P
PrintablesElias baut was

MINI 3D-Printed RC CAR by El1as.F

Before I started designing, I had set myself the following goals. It should be as small as possible, but still have all-wheel drive and have suspensions. Of course, it also has to consist largely of 3D-printed parts. If you want to learn…

Pobrania
248
Polubienia
53
Ocena
5
P
PrintablesPedja

Wio Tracker L1 Pro Holder with Belt Clip

This is belt holder for Wio Tracker L1 Pro. It has mount holes compatible with walkie-talkie belt clip for Baofeng UV-5R (costs about 1 USD). Clip allows holder to be attached to waist belt, backpack, pocket or something else. It has…

Pobrania
246
Polubienia
39
Ocena
5
P
Printablescxp

Makita Mega Battery for 18650 (BMS version - BL1830)

This is a remix (draft) of the "Makita Mega Battery for 18650 10x extended 15x 20x replica" ( https://www.thingiverse.com/thing:5026796 ) with the following changes: modified version of 1.stl + 2.stl to fit a BMS (BL1830) like…

Pobrania
244
Polubienia
22
Ocena
0
P
PrintablesMrToToRo

Side protections for iflight XL10 v6

-I recommend printing from PETG with 100% infill. -The part is not symmetrical, you will need to reflect the 2nd half in the slicer. -I use Hobbywing 65A G2, most likely it will fit other ESC

Pobrania
244
Polubienia
8
Ocena
0
P
PrintablesArea51

ClipOn Handle for SL1/S Speed Platform V3

It can be unsafe or risky to handle the construction platform full of resin with the risk of it being dropped - and worse if it falls into the tank or hits the display. The build platform on the Prusa SL1 and SL1S Speed has very little…

Pobrania
234
Polubienia
40
Ocena
5
P
Printablesatok

DTL150 electronic load enclosure

A two-pice clam shell held together by M3 screws and brass inserts. Requires supports for the screw holes at the bottom. Additional parts needed: 8 M3 brass inserts (the hole is for 6mm version but 3mm should also work) 4 M3 25mm screws 4…

Pobrania
232
Polubienia
13
Ocena
0
P
Printablesmco

shoulder remix for L13

I used tinker to lengthen the clavicle because I wanted that broad shoulder look

Pobrania
229
Polubienia
45
Ocena
0
P
Printablesyodakubota

Wio Tracker L1 Pro Case - 4000mAh versoion

Printed with 5 base layers, 3 perimeters, 0.4mm nozzle, 0.2mm layers, PETG (other materials could work too) Printed buttons and text in separate color. Remove the colors in the 3MF file if you can't print with multiple colors.

Pobrania
228
Polubienia
27
Ocena
5
P
Printablesmco

RT Cyclone Helmet for L13

Happy printing, not sure if scale is giant. looked about right. happy printing.

Pobrania
225
Polubienia
50
Ocena
5
P
PrintablesHelmut Lord

nRF54L15 Helmet - Case for the Nordic Semiconductor nRF54L15-DK

A compact, 3D-printable case designed to snugly fit the nRF54L15 devkit.

Pobrania
223
Polubienia
9
Ocena
5
P
Printablesnguyenkvvn

L114 Lanyard Enclosure for the Heltec T114 v2

This is a case for the Heltec T114 V2 for you to dangle on a bag, backpack, or set of keys as a neat “charm”. It includes space for a GPS module, as well as a RAK PCB antenna or OEM coil antenna. Materials Required Heltec T114 V2 nEF52840…

Pobrania
221
Polubienia
50
Ocena
4
P
PrintablesWill

Nikon EN-EL15 Dummy Battery

A dummy battery for Nikon en-el15, to fit Nikon D7100 camera and others. I've createed this in order to work on other projects. Category: Camera

Pobrania
221
Polubienia
14
Ocena
5
P
Printablesvidision

Wio Tracker L1 Pro Housing Original & Wide (organized)

I printed the wide version in ASA at 0.20mm layers which should have been pretty good. But the screw posts are not designed well (sharp corners) and one did break despite careful handling. I find the walls a bit thin and the accessory…

Pobrania
215
Polubienia
17
Ocena
5
P
PrintablesLukaskun

QL1, QL2 and QL2.1 anchoring hook Ortlieb

Design based from the original parts. works with standard resin. It might be printed with an 0.2 or 0.1 nozzle for FDM printer as well. After 6 months of daily use one part broke. I made a V2 of the hook a bit thicker at the base and add…

Pobrania
213
Polubienia
36
Ocena
5
P
PrintablesSoftware2

Small project box for LOL1n - ESP8266 (NodeMCU Lolin V3)

This is a tiny box to hold a wide NodeMCU board. The box is tall enough that you can cram a few select parts underneath the board. There's a cutout for the (ugh) micro-USB port, and a hole to stick a 3mm LED out, or run some wires…

Pobrania
207
Polubienia
7
Ocena
0