1223 modeli
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Please click ❤LIKE❤ if you appreciate my work 😊 The rally legend – now on your wall. This 3D printable model of the Mitsubishi Lancer Evolution V is a tribute to one of the most aggressive and iconic 90s performance cars. Wide fenders, a…
[FR] La pièce présentée est un dé à 20 faces équilibrés couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est composé d'une seule pièce individuelle.…
[FR] Les pièces présentées sont un dé 10 à 10 faces équilibré et un dé 100 à 10 faces équilibré, couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est…
[FR] La pièce présentée est un dé à 12 faces équilibré couramment utilisé en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, le modèle est composé d'une seule pièce. Imprimante :…
Ein Halter für das Laufrad der Kinder
This is a replacement valance clip for 2.5" blinds. I'm not sure of the brand of blinds, but if your clip looks like this one and the blinds are 2.5", it may work for you. The model prints well in draft mode (0.30mm) without any supports.…
After creating my “game spinner” to allow selection of 1-12 (just like using a pair of dice). I revised it further to be used with the Prusa Balance Game (available here on printables). This is an easy print - If you use the printed…
A simple, bright strong sign to let people know whatever they are doing, they are being recorded while they do it. This is modelled at 6" x 6" x ¼" thick I printed this from PLA at 0.30mm DRAFT with 5% infill
I designed this stand to hold my Hudy RC Tire Balancer. The balancer can be hand-held, but the stand makes balancing hands-free and eliminates human factor during the process. When not in use, it can be easily disassembled and stowed in…
Number Scale to provide preschool and elementary school children with a basic understanding of quantities and simple equations. "Easy and quick to print. Requires minimal support. You should print the base on its side to ensure the…
Le lancement de fusées à eau est une activité ludique, mais elle peut être dangereuse sans un minimum de précautions. L'utilisation d'une base sécurisée est donc nécessaire. En voici une réalisable avec notre imprimante 3D La retenue et…
A fun balance game that you can spend hours on! Print Settings I printed mine with: 0.3mm Layer height PLA Details You might need to enable a brim, but I didn't need to. These pieces are designed to use minimal filament, so it is a great…
Check your local rules to see if balancing can be done, or if there are restrictions on how to balance (such as adding or removing mass). The fixture will require the following additional hardware: Qty 2 - M5 hex nut 16mm or longer M5…
Nerf or other 2mm flywheel balancer Requires at least 2 5mm diameter strong magnets and a shaft out of an old burnt up 130 size motor
The Ultimate model was a bit confusing, so I simplified it to ensure that all the print files were ready for someone else to print. It includes variables for custom infills for the dice and balance pieces, as well as special infill for…
Kostka, kterou lze používat k Pocket Tetris Balance Game. A dice that can be used for Pocket Tetris Balance Game.
As the original Part was broken, i made an upgrade. the Orginal Snow-Foam-Lance is linked below: https://www.amazon.de/gp/product/B09KGGTTWG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 printed with the mk4 with prusament petg jet…
The kids in the preschool LOVE stacking and contraption games. I made this simple to print and oh-so fun stacking game set for teaching balance, patience, and just plain having a great time building something. Print 21 or more cups for a…
This model of a simple balancing scale was created to be used as a teaching aid in an “unplugged” activity regarding sorting algorithms. The material might be used in computer science or maths classes to give students the opportunity to…
Toutes les pièces imprimables sont ici, mais pour les détails de montage voir sur mon site : http://fusees.free.fr/base%20bouchon%20compressible.htm#BBC21
Could not find these anywhere online so I modeled one up.
This model replaces the switch rocker of the BuschJaeger Balance SI series and allows the use of a Hue Button instead. A small magnet (ø = 15 mm, height = 1,6 mm) is inserted on the back so that the Hue Button holds magnetically. Due to…
This is a replacement cap for the rear wheel bolt of a Louis Garneau F-UN balance bike. You can show off your style by printing it in fun colours! You can see this model (yellow) compared to an original (black) in the photos. Update…
Replacement clip for mini blind valance. Best to print this out in PETG for the added flexability. 100% infill recommended due to size of part.
Espresso Coffee Portafilter Stand Balanced 73m OD 58mm dia basket Stand for portafilter will rest without having to hold the handle. Small base to fit on a small scale. Stand designed to work with the portafilter of the Elektra…
You may chose between 2 characters ( Jo Prusa and Baby Dragon ). All models are designed to be suportless so you dont need them for succesful print.
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- News: 12/15/2023: “ Testris_TS_… ” is a travel size version at 50% of the original size. NOT TESTED. Please let me…
Juega el Tetris en la vida real, esta vez evitando perder el equilibrio
This is a stacking game where players carefully place complex 3D pieces onto a growing structure, judging alignment, weight distribution and stability. While the goal is to build higher than your opponents, pushing the structure too far…
For single player this simple balancing game has one main goal… see how many dinos you can stack on the wobbly base. With two players you will need two of each dinosaurs printed. Each player will start with 10 dinosaur pieces. Then one…
I found this great game of Tetris to play with the grandkids. printed it and loved it. I printed 6 sets of pieces which is plenty. I designed a box to put it all in. You don't have to print it in colors, but if you have a BambuLab or…
I made a very simple box/case for the game with integrated stand. The existing game board will act as the case cap/lid without any modification requirements. There is enough space between the game board and the box to pick the figures out…
This is an improvement on the rather popular "Floating Cup (smoother look, foolproof assembly)", https://www.printables.com/model/164778-floating-cup-smoother-look-foolproof-assembly . See that model for some notes and directions of how…
Just quick remix. Scaled down to 85 percent of original. To spice things up a little use different colors in layers while slicing (M600 command or pause-change filament-resume). Print 4 pieces of every tetris-piece, it will fit easily…
This is my “Ultimate” version of this game, with quite a few new play possibilities to make it even more fun. Hope you will enjoy it, and please let me know if you've ideas to improve it, I'll design the parts. Please note that I won't…
Print each furniture piece at least 4 times . Use any colors you like for better visibility and fun. How to Play Place one piece as a base. Stack furniture pieces on top of each other to create a balanced structure. Same-type elements…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Hi, I created a balancing game with a figure, you stack them on top of each other in the shape of a pyramid, whoever falls down loses. It also comes with a nice box that can hold about 80 figures. Enjoy
Hello, the original author of the model has contacted us to check your remix as it does not meet the license conditions or is not a transformative remix of the original. Since your remix violates the license and rules of the original…
Update 26.05.2024: Added version for 4-color multicolor print (AMS & MMU). Summary This is a model of a Mitsubishi Evo 4 (Lancer Evolution IV) in a kit / gift card style. Some characteristic details can be discovered. Equipped with…
This is a fun and challenging balance Tetris game. The game is simple to play: simply print as many sets of pieces as you need (I printed 1 set per player, but 2 sets work great). Every palyer get one pieces of each type. The first player…
Picture this: You're an experienced chess player who has hit a plateau at 500 elo. You feel stuck and bored with traditional chess. Then you think, what if I made chess even harder? Well do I have the game for you! Balance Chess…
Introducing the FDM (Fixum Dude Motors) print in place ambulance. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Update 25-Nov-2025 Tree and Latches updated to R4. Added internal feature to the Tree to increase strength. Thanks to Slant3D for the idea. 23-Jan-2024 Uploaded game pieces with a round base. Original hex base game pieces will also fit .…
LANCE OF LONGINUS IN EVANGELION Category: Toy & Game Accessories
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Toolbox/casing for the Tetris Balance game, with or without colors The ‘balance’ have a reserved emplacement in the toolbox lid, it stays in place as it is a tight fit and 3 clips retains it. The tray that holds pieces is removable to…
Compared to original, it has adjusted scale to 150 mm wide base, letters are set in 0,25 mm deep (first layer) and it has added chamfer 1 mm on the all edges.
https://www.printables.com/model/633194-pru https://www.printables.com/model/669446-prusa-balance-game-collapsable/files https://www.printables.com/model/667011-prusa-balance-game-accessories-box-and-two-piece-s I have included: The…
Dinosaur Stack is a fun and creative 3D printed game that focuses on balance, patience, and skill. The goal of the game is simple: stack the dinosaur figures on top of each other without making the tower fall. Each dinosaur has a…
parts size adjusted for easier storage
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Place as much piranhas to the base as you can. Try it by one hand only. Share your best result with friends :)
Storm Trooper: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a…
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
The Prusa balance game is a great model and a source of much fun. However, it lacks: a box to contain all the parts, and a two-piece base for easy disassembly and storage in the box. This remix addresses both issues. The connector between…
It's Swing-Wing Saturday Muh dudes! and so I present this beauty, which has been a long time in the works. In addition to this, Swing Wing Saturday will be once a month. As the name suggests, the kit card will have a variable sweep wing,…
A simple mechanical calculator powered by gravity and trigonometry! Either when teaching a child to do basic addition and subtraction, or when explaining more complex concepts to a physics class, like center of mass and mechanical…
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
Rescaled a popular gnome figure and placed on a hex tile to be used with Prusa Balance game. Original gnome: https://www.printables.com/model/178691-gnome-christmas-tree/ If you need some matching hex baskets to catch and store your…
Short and fun balance game. For two or three players. Roll a dice and see what object you need to put on the unstable base. The one who fails to put the object on the base and keep it stable lose. The youngest player decides who starts.…
This is the Yeetlance: a shell-ejecting, breech-loading, single-shot, half-length dart blaster. Practical? No. Competitive? No. Fun? Oh absolutely. Update 2024-01-20 p2: Added missing O-Ring for bolt plug seal to BOM. Update 2024-01-20:…
Introducing the Lancehorn from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
My daughter asked for a Barbie Gymnastics set from Target for her birthday. After purchasing the one she wanted ( https://www.target.com/p/barbie-174-careers-gymnastic-coach-dolls-playset/-/A-52607245#lnk=sametab ) and realizing how…
The LOVE Balance Sculpture is a modern decorative piece that blends minimalist design with pure emotion. 3D printed with a matte red finish, it transforms the word “LOVE” into a balanced three-dimensional structure full of movement and…
This is a remix to address some issues I had with the original design. Printing info: PLA 0.4mm nozzle 0.20mm layer height 15% infill [UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted.…
Supersonic variable-sweep wing, heavy blended wingbody bomber, Remix of a FMS Model source: http://logic-wizard.art.coocan.jp/fms_e.htm https://en.wikipedia.org/wiki/Rockwell_B-1_Lancer Category: Vehicles
Build Info: Parts can be printed with PLA. No supports needed Worth mentioning: The blocks can be printed individually or as a kit. The number of blocks required to fill the optional storage container is shown in “( )” in the model name.…
Printed in 0.15 mm layer from Prusament: PLA Lime Green (Blend) PLA Prusa Orange PLA Lipstick Red PLA Pearl White (Blend) PLA Pineapple Yellow PLA Royal Blue (Blend) PLA Prusa Galaxy Black PETG Clear All types of blocks are 4x.
The players take turns stacking the stones. When the tower tips over, you add up the number of stones. After several rounds, the total is added up. The player with the fewest points wins.
I tried to make the size so that the weight is the same if you use similar infill for the dragon and mario. Needs supports. Edit: Added a V2 for the model which makes mario better fused with the bottom pad. Also makes him bigger to be…
I added the base that goes with the cone. I lost it years ago and had been using a nail to balance the cone. I forgot about the base when I made the first model. Printed with no supports in about 90 minutes.
Baby Yoda: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Darth Vader Character --- !!! NO SUPPORTS NEEDED !!! U can print that without support, using…
One more for the CSHMFSEU (Clockspring3D/Hot Makes/Filament Stories Extended Universe)! Presenting an ambulance remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck to complete the first responders set. Original…
This is an easy-to-print platform for supporting the balance wheel during a watch service. It is similar to Bergeon item #7990 “Support for Cleaning the Impulse Pin”. In addition to allowing for cleaning of the roller jewel, it makes a…
English: This corner mount is for Reolink TrackMix Wifi security camera. Besides the printed parts you need: 4 x Heated Inserts M4 4 x M4 screw (12-16mm long should work) the 4 screws and dowels that came with the camera + two additional,…
A new spin on an old idea. Indulge in this entertaining and engaging balance game that draws inspiration from Tetris. Begin by printing out your game pieces (it is suggested to have 6 sets, but some players may find that 8 or more work…
This is a remix of the Balance Tetris box to fit the Ender 3 build plate as well as to enable multi-colour with inserts of the letters and the bottom of the holes for the pieces. This model uses less material while able to fit the same…
3D Tetris Balance is a physical tabletop game that combines spatial reasoning, balance, and a bit of luck. Inspired by classic Tetris shapes, players take turns placing lightweight, open-frame pieces onto a curved see-saw base. As the…
Full instructions are at https://www.lampysecurity.com/ Supports are required, and only around 15% infill is needed.
I just took paulorfo's dice and replace the inverted z with the v piece of Bhorian's balance Tetris game
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
A friend of mine has a Mitsubishi Lancer and he had these covers stolen/broken. And of course, ordering online would have been way too expensive. Fortunately he had one left that was partially broken, but I managed to take measurements…
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
I wanted to make some fun pieces for the balance game. They are the same height as the Joe Prusa piece. They vary a little, but are within 0.50 grams of each other. PLA 10% infill with 3 walls No Supports
Updated 5/29/26!! - Changed shaft interface to reduce error in assembly - Increased thickness of parts to increase durability Use this tool to help balance the ratchet on your Beyblade X beys. I saw too many people selling a simple…
Bigger base for more fun Pack of 21 tetris cube shapes New tetris cube shapes for off-axis play Bigger base optimized for Prusa MINI (90% scale) More shapes, more fun
This Marble Balance Maze recaptures part of my (and maybe your) childhood! Inspired by the original Brio marble labyrinth game, players navigate their marble from the start to the finish, winding around obstacles and pitfalls along the…
Having printed the Prusa balance game board in brown and green to look like a tree, I decided I needed some tree dwelling creatures to finish the game off. I couldn't find any ready made game pieces along that theme, so opted to remix a…
Meine bärenstarke selbst erstellte CaliBär Figur als Spielfigur fürs Prusa-Balance-Game!
Use case Shows the wind direction precisely, even if mounting pole is not perfectly upright. To achieve this, the vane and the counter weight are carefully balanced. Printing Print all parts in the uploaded orientation. To achieve a very…
Pieces for a balance game based on the original Tetris game. This is a remix of the original model by paulorfo to include these newly re-designed game pieces. The chamfers make the pieces fit together a little bit nicer than they once…
The set includes three different weight sizes, offering a variety of interactive educational activities. This engaging model teaches the basics of weight measurement and balance in a playful way. Print instructions Common to all parts :…
Protective caps for Li-Po balancing connectors - JST-XH 2.5mm. Available sizes: 2S, 3S, 4S, 5S Additionally, more sizes can be made by editing the original STEP file (slicing in the middle and adding/subtracting 2.5mm). Please print a…
100% box has been tested, and works very well. Update: I cobbled together a box for the larger base (Base 2). It is ready, but too big to fit on my school printers. If you decide to print this one, let me know if it works nicely!
![[EN] Balanced Die 20 / [FR] Dé 20 équilibré](https://media.printables.com/media/prints/86729/images/918647_f353152c-5e2a-4a31-88bc-38c842f89bc9/de20c.jpg)
![[EN] Balanced Dices 10 & 100 / [FR] Dés 10 & 100 équilibrés](https://media.printables.com/media/prints/86812/images/919430_c2e5f748-9a91-4a88-be85-610678f67824/de100c.jpg)
![[EN] Balanced Die 12 / [FR] Dé 12 équilibré](https://media.printables.com/media/prints/86705/images/917877_bfba95f3-3acc-4847-8074-985e866c3fd2/de12b.jpg)
