2058 modeli
Thanks Hello! I needed to make a few holes around the house to make some installations and dust was an issue. Decided to design my own guide and dust collector to make it look the way I wanted. It doesn't need supports! =) Hi again! I…
Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu
This is Drill Dust Collector and Guide V4 , the ultimate multi-functional dust management solution for drilling tasks! Use tree supports on overhangs. Key Features: Vacuum Compatible: Connects to vacuum cleaners with a 35mm diameter.…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Use tree supports :) Want to have a commercial licence on this model? → Join the CLUB :)
Wydruk około 2,90 €–3,54 € nettoWstępna wycena jednego wariantu
The second version with improvements is available. Drill Dust Collector V2 Drill Dust Collector with Centering and Marking Features. The drill dust collector is an innovative accessory designed to collect dust during wall drilling with a…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meet the Drill Dust Collector Mini – the ultimate helper for clean drilling! 🛠✨ Turn off arachne mode, use 0,25 mm layer height. Use tree supports. ✅ PET Bottle Compatible – Screws onto a bottle to trap dust & debris ✅ Built-in Guide –…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
AirTag Bike Mount / Reflector Apple AirTag is a fantastic little device, and I wanted to be able to use one to track my bike in case of loss or theft. There are expensive accessories out there, but I wanted an inconspicuous, stylish, and…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
One of my first designs. Guess it could be improved, but it works.
Wydruk około 8,07 €–9,86 € nettoWstępna wycena jednego wariantu
Every Euro country does not only have its own design on the backside of each Euro coin, they also mint 2 Euro coins with yearly changing motifs, making them collectable objects. These small trays help to organize your 2 (and 1) Euro…
Wydruk około 1,93 €–2,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enclosed version of my Gardena Gutter Adapter Water Collector with direct connection to a watering hose. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I couldn't find any existing models that perfectly fitted my needs (collecting coins from 50 cents to 2 euros and were not too bulky), so I designed my own model. Feel free to customize the dimensions (or anything else) to better suit…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Discretely protect your bike from getting stolen. There are 3 total parts to this print (the bottom, the top, and the connector) and all you need are 3 screws to put it together (M3 12s will work). The bottom part is printed in Hatchbox…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enclosed version of my Gardena Gutter Adapter Water Collector. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the adapter off when moved. Print slowly…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
This is a simple two part holder for mounting a collapsible photography/videography bounce reflector to a cheap light stand. I wanted something to hold a reflector to a stand but couldn't find anything i was happy with, so made this up.…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Model Info | Introduction I want to introduce you to an easy-to-print Bowens Mount Lamp Reflector. I use it printed in PLA with my lamp up to 50% of the maximum wattage, and it doesn't melt or get soft. Save your money as these typically…
Wydruk około 10,17 €–12,43 € nettoWstępna wycena jednego wariantu
This is a simple reflector mount design suitable for most bike frames. Designed around standard reflector supplied with most bikes. I used superglue to glue some rubber band cuttings to the inside to stop it slipping and rubbing on the…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reflectors are a safety feature. Consider replacing them with a genuine part. Use this model at your own risk. Dimensions match the original part mostly. The clip is the weakest point in this print therefore it's made as a separate piece.…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Vakuum cleaner attachment for drilling holes. It holds itself on the Wall. Printed with 0.2 layer height in PETG. Print took about 3h 7min. Use support on the inner ring.
Wydruk około 2,48 €–3,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction This Difusor is designed for people who have a printer on their desk that is short and their LCD screen extends beyond the desk The printout reflects the light from the indicator LEDs and their colour is more visible under…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The stock MMU3 Selector tends to break when tightening the clamp that holds the FINDA in place. My first one broke, as it seems they made the hole larger than the previous model. I ended up remodeling a couple features on it. First, I…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is one of my IKEA ORDNING collection models, take a look at the others below: Utensil cutlery drainer clamp hook for dish drainer. IKEA ORDNING. Folding dish drainer clamp hook, for big pots - IKEA ORDNING ORDNING Dish drainer feet…
Wydruk około 4,52 €–5,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter is designed to fit the outside diameter of the 4" dust collection port on wood working tools and reduce it to the ID of the 2.5" shop vac / dust separator hose. Many online adapters and store bought adapters that I've tried…
Wydruk około 6,08 €–7,43 € nettoWstępna wycena jednego wariantu
with vacuum connected drill holes on most surfaces to reduce dust. will fit shop vacuum.
Wydruk około 10,21 €–12,48 € nettoWstępna wycena jednego wariantu
I wanted to have a stylish way to remember Lola Haye's current class and designed this small gadget. The indicator has small pegs on its back to snap into place. You can adjust the force needed for turning by sanding the pegs carefully…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
2 versions available : Version 1 (Not fully printed) includes 4 parts : Common parts : “Cyclonic cone” “Karcher WD3 KWD3 Hose adapter” (if you want to plug this hose) “Bell mouth” “Hose clip” Version 2 (Fully printed) includes 4 parts too…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Snail collector. Sběrač šneků v akváriu.
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
A design born of necessity. The floor vent in my bathroom is right in front of the toilet against the wall. In summer, the AC freezes my feet, in winter the heat from the furnace directly below scorches my toes. Enter the HVAC deflector…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The outer ring of a friends telescope golf ball collector broke off. I designed and printed a suitable spare part, so I could repair the collector. 0. Preparation To take off the original outer ring from the telescope rod, you carefully…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Collector of coffee ground from grinding beans for espresso makers. This one fits for Eureka mignon silenzio.
Wydruk około 3,06 €–3,74 € nettoWstępna wycena jednego wariantu
Make use of old magnets and build a swarf collector. Magnets comes from scrapped microwave owens, and they all seam to have the same size (!?). Print it, and glue the parts together. You need 8 x magnets ⌀57mm (2" 16/64) ~10-12mm ("…
Wydruk około 12,79 €–15,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please check dimensions, might not fit for everyone. Print, test, leave a comment or suggestion and enjoy. https://buymeacoffee.com/thorben
Wydruk około 7,51 €–9,18 € nettoWstępna wycena jednego wariantu
Use this insert on existing ceiling ledlamp to enlight a shelf. This redirects some light horizontally but leave the main beam pass through. Use ASA to ensure structural strength under led heat (tested with 4,5W). ! Do not use is with non…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
This is a linear sample selector I have created. It is made to hold the following samples: https://www.printables.com/model/1133954-filament-samples The selector is made up of multiple segments. And is made to fit into a IKEA ALEX desk…
Wydruk około 10,44 €–12,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Islabikes replacement reflector holder
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
This deflector is made to be mounted in existing ceiling LED lamp. it redirects light horizontally to create indirect lighting of your room. I use it in my bathroom for a cozy feel. Print in ASA is recommanded to prevent for deformation…
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Hi, this is my first 3d model made in Tinkercad. This specific dew collector was made for the following rice cooker. Precision Meets Performance: Transform Your Kitchen with the Zojirushi Commercial Rice Cooker - Zojirushi Food & Culture…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Drill Dust Collector V3 - Modular 3D Design I'm thrilled to introduce the Drill Dust Collector V3. This tool, entirely designed and 3D-printed, features a 3-in-1 modular design and an eye-catching two-tone aesthetic for superior…
Cyclone dust collector. Can be printed in two parts on the Prusa Mini! Bouth parts have a rim to be fitted together neatly. PrusaSlicer Files have all the necessary supports!
This Drill Dust Collector sucks to the wall and removes the dust when connected to a dust extractor. It has a 35mm diameter hose size, which should accommodate most workshop vacuums ( I am unsure about home vacuums ). Can drill holes up…
Cyclone dust collector for a 2.5" hose. Made to be as large as could be on a Prusa i3 mk3s. I used m3 hardware to put the top and bottom together but glue would work just as well. ¼-20's for attachment to the bucket. I put this on top of…
This innovative dust collector is designed to optimize your drilling work. The model natively supports 27-28mm mineral water bottle mouths and includes an adapter, making it compatible with Coca-Cola, Sprite, and other standard beverage…
NEW MODEL, WITH ADDITIONAL FEATURES: https://www.printables.com/model/1193300-drill-dust-collector-v3 Drill Dust Collector with Centering and Marking Features V2. The drill dust collector is an innovative accessory designed to collect…
Super easy printing! The hand is placed on the tapered pin of the tray. You can glue them * if you prefer, but this is not necessary. The bowl is placed on the recess in the hand. Also with this one: If you prefer, you can glue them, but…
Anycubic Kobra X filament deflector and waste bin. The filament deflector mounts directly to the back of the filament extractor and is secured with screws. The filament waste bin is designed to fit snugly next to the Kobra X. It sits…
Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 05 November…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed the "Complete Purge System" in two versions for Bambu Lab A1 Series printers. The first…
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
⚠ Important: Do not over-tighten the bottle to avoid damaging the print. Use tree supports only on build plate Introducing Drill Dust Collector and Guide V3 —the ultimate tool for keeping your workspace clean while drilling. This upgraded…
Drill holes without the mess! I had it print on the face that touches the wall with supports for 50 degrees.
Print each half to lie on its end so that no supports are required. When printed slide both halves together and adjust size. Side and back lips go under vent register so no magnets are required.
DeWalt AirLock compatible twist-lock dust collector fitting I like DeWalt tools well enough and own a bunch, but like every other tool vendor their approach to dust collector connections is psychotic. I'm not at all convinced that any two…
This is a remix of ShapeLabs's track saw hose deflector design, which was then updated by Mak-E-Verse and made compatible for Makita tracks/rail guides. Both original designs are based off of the Festool FS-AW available for their rail…
A simple to use drilling-jig for drilling perpendicular/straight holes. A container is added to collect drill dust when drilling on wall. It's customizable. Click "Open in Customizer" to generate your own model. Or you may find one…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Universal cyclon for vacuum cleaner. Can be attached to any container. Use a 250mm long drain pipe diameter 50mm in the center. Use screws for attachment. Make sure you seal the cyclon to the container.
🧹 Trapani senza polvere, pareti pulite! Questo pratico accessorio da stampare in 3D raccoglie la polvere prodotta durante la foratura, mantenendo l’ambiente pulito e riducendo il disordine. ✅ Caratteristiche: - Compatibile con…
Update: 2025-05-15 I've removed the bambu exclusive restriction and have set the license to allow remixes. Have seen a few other variants out there, but wanted something that was a little more minimalist as I have no need of silca bag…
This is a dust collector with the effect of sticking to the wall for standard and professional vacuum cleaners. It adheres to the wall and leaves your hands free for drilling holes. It is mainly intended for dry diamond drilling with…
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
A refined selector, with smoother filament paths and a robust blade holder. Someone raised the point that when you run out of filament, the return pathway is still quite problematic. However, as you will only need that return pathway when…
This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…
A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…
This is a "must have" if you fish... there's nothing worse than seeing discarded fishing line while out fishing or laying in the bottom of your boat. Discarded line can also impose a threat to wildlife. These are a few waste line…
The Snapmaker U1 has a bad habit of throwing its poop over the edge of the bucket. This deflector connects to the nozzle wipers and creates a barrier to help guide the waste filament into the bucket. Features: Can be printed without…
A wide-shielded dust collector that attaches to the wall using vacuum suction — giving you a completely hands-free drilling and cutting experience! 🧲 Holds itself firmly to flat surfaces while you work 🔄 2 variants available: • Standard…
This is not for multi-colored prints; it's to collect the few purges that happen with every print and when you switch filament. It's a super easy print, and it just clips onto the purge system. [UPDATE 2025-02-15] Made the backboard a bit…
This poop deflector is a simple, lightweight accessory that slides onto the right side of the X linear rail of the Anycubic Kobra 3 Max. Its role is to redirect purge blobs and filament ooze away from the motion system and bed, guiding…
Print with 0.16 mm layer height , no support An extra plate can be printed from PETG or TPU and clamped into the deflector. This prevents the purge from sticking to the deflector. If the plate does not lift, simply glue it in place. The…
This is a dust collector for Bosch angle grinders. The collector simply slides onto the guard. I designed it for a GWS 18V-15, but it should fit all Bosch 125 mm angle grinders with its style of adjustable guard. Ensure the slot for the…
This design has been copied from thingiverse: https://www.thingiverse.com/thing:3921514 I am not the designer. It is actually designed by Anthony Wheeler: https://www.thingiverse.com/chillhaus/designs and published under the Creative…
I was looking for some cool waste box for my A1, but haven't found version that both looked cool and was compatible with extra supports needed when you use AMS on the top and used deflector instead of huge wall. Hence designed this little…
The suction holds it very steadily without any extra sealing on the edge. Proof: https://youtu.be/smAcbBiziY4 Compatible with standard 35 mm home vacuum hoses. Suction test: Printable without support. 20230506 update: uploaded Fusion 360…
A rain collector to insert in your downpipe. Its made for a DN100 Downpipe and a ¾" or 1" garden hose. The collector should be mounted in such a way that the internal weir is on the desired waterline in the rain barrel. Thus the rain…
Update 2-16-24: I recommend using gorilla glue clear polyurethane glue to attach the TPU gasket to the main collector. Other glue types don't really like to stick to both PLA/ABS and TPU. update 11-17-23: I have added an adapter to make…
Drill Dust Collector Drill Dust Collector is a practical tool for DIY enthusiasts and craftsmen, designed to effectively address the issue of dust when drilling. This accessory captures and vacuums dust generated during drilling in the…
A simple adapter to suck up dust from drilling. A quick solution was needed, so this is not a well-designed model. But it works well with the standard Festool hoses. The inner diameter is 35.6mm and becomes slightly narrower further…
THE ULTIMATE DUST CATCHER. Big handle to easily hold the tool against the wall. Big opening to let the whole drill chuck in the tool. Catches ALL the dust in the container.
In case you don't want to file a detent pin round for your super safety switch, here is a working solution. I printed it on a resin printer with 0.05mm resolution. Feel free to share…
Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP. Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push…
This is one of the first accessories I designed for my S1 Pro. If you own one you probably know what this is for. I've been using this for a year and I have none of the typical cable insulation damage nor have I ever grabbed the y-axis…
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
This is a remix of the MMU2S Selector FINDA version R2 (improved blade holder mentioned in release notes for Firmware 3.9.0) with a slot for a 6x2x10 magnet for improved FINDA reliability. (The magnet used is the smaller of the magnets…
UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…
similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…
Wall thickness is 2.25mm. I run a 0.6mm nozzle with a 0.75mm extrusion width, so it worked out to three passes on my setup.
Update: 5 Jun 19. I had a problem with occasional jams during loading with blunt tips hitting the blade. I've modified the selector and blade cover a bit further to prevent this from happening. I've also made the blade "sockets" much…
Cyclone Dust Collector The Dust collector main body fits perfect on a Prusa MK3 Printbed. Update 03.03.2025: Os Vac Neo M32 Intake and Outlet Adapter Update 25.01.2025: Os Vac Neo F32 Intake and Outlet Adapter 35mm, and 38mm outer…
This is based on @PeterH1500 design and modified to fit with 50mm PVC pipe. The lever is redesigned for better grip (but need to be printed with support) and has stops to turn 90 degree only, open/close. Have build a system using five…
Some benefits: airflow is channelled away from the printed parts perfect fit and installation without tools low material usage and low weight
A heat shield designed to stop hot air in the Creality Space Pi X4 and X4L from blowing directly onto the filament spools while drying. I found DJR Engineering 's heat shield on Makerworld . It was too flimsy for me, though. So I designed…
Drill dust collector for collecting dust when drilling. Diameter of the hole for the hose is 32mm. This model is fully printable without supports but there are bridges in the hole where the hose from the vacuum cleaner is placed, but you…
Two models are provided, one with a centered port designed to hang off the edge of a table (and easier to print unsupported), and one with an offset port (would probably require supports for FDM) if you need to mount flat to the table.
parts required 20x20x16 stainless angle brace from eBay or 20x20x32 stainless angle brace from eBay or 20x20 steel angle offcut A durable drill guide with built-in dust collector. Cut the steel angle longer, if you want more support for…
Made this thing to collect the dust created by drilling holes in a wall. FYI. The initials shown in the 2nd picture are not in the .stl file included. Category: Hand Tools
I really liked haitonno's design for this drill dust collector, but for some reason, it was "upside down" from what my Dyson would need. So, I flipped the button/lid around. Much better. I printed in 0.3 resolution, and the button broke…
A Drill dust collector i Designed yes i know there are already several to download... i just wanted to design my own ;) the connection is a 37mm Hole Printed in Tinmorry Matt Black PLA i wanted to upload the *.stl but the website tells me…
This is a redesign of a dust collector designed by Frank Bernhard https://www.thingiverse.com/frankber/designs
2 collectors which can be used in my basic tile to create new marble tracks. One is the drop collector, which catches the ball from a higher level, redirecting it to a rails to continue it's journey. The other is the endpoint of a marble…
This is a scoop to catch waste when drilling into a surface. This is meant to use on a wall or vertical surface. -- Print this flat and without supports. Category: Tools
