1377 modeli
Spell Templates to measure distance and Area of Effect for Tabletop Games like Dungeons and Dragons or Pathfinder. The template makes it easy to see which monsters/players get hit by an AoE Spell. No more counting squares or moving minis!…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
Description Loc-line hoses are industrial flexible hoses used in manufacturing machine to provide the coolant accurately on the part and the tool during operations. But those kind of hoses can also be used as very useful helping hands to…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The super simplicity of a Tyrap / Tie-Wrap / Zip-Tie translated to use with a rope. Ever hung up a clothesline or something else hanging from a tree on vacation? Always that fiddling with tying the rope and untying it again at the end of…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
A remix of Figter Jet v2 from Edie S. I redesigned the wings a bit more close to the F-18 design. Can be printed from two separate parts without supports and then glued together. Print was tested with PLA. Edit 17.09.2022: Added non-split…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Simple legs to convert any Ikea Ivar shelf to the free-standing table/desk/shelf. Use one wood screw (for each leg) that fits and small enough not to puncture the shelf through. My gf used it as a displey riser and workspace organiser. We…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple model inspired by herringbone gears and designed to work as a flower pot cover. It fits standard plastic pots up to 11 cm in diameter. Print instructions I just used the standard profile for Prusament PETG, vase mode and…
Wydruk około 4,31 €–5,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you have a dead SSD and an unshatterable ego? Then look no further, print this, superglue the two sides together, and attach it to your bag, purse, keys or anything you desire! Originally created cause I thought M.2 SSDs kinda looked…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm thrilled to introduce my latest design: a Round Flower Pot adorned with an aligned scale-like pattern on its sides, capturing the essence of elegance and practicality. The pot's sides are tilted at a subtle 6º angle. Its wide, flat…
Wydruk około 15,68 €–19,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Put this informative sign on the door to your workspace, or at your printer's door. It's designed to print easily without MMU/AMS with just one manual color change. Printing instructions: Layer height: 0.2 mm (important) Top surface/top…
Wydruk około 1,35 €–1,66 € nettoWstępna wycena jednego wariantu
This cover gives the hotend fan a jet engine-like look. You need support. Three variations: A: Four M3 holes B: Two M3 holes C: Two M3 holes, but kept the counter bore for a symmetric look. Version 2 (June 3, 2024): In the first version,…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hatsune Miku : Lego Like
Wydruk około 5,55 €–6,79 € nettoWstępna wycena jednego wariantu
Star Wars Service Droid - FLO like -WA-7
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
I wanted a photo frame with a retro vibe (but the ability to use standard photos). I've included four versions: Standard polaroid size window (3.108 × 3.024 inches): Jumbo Model (4.33in x 4.39 inches) 4x6 inch version 5x7 inch version
Wydruk około 7,63 €–9,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Extruder Visualizer, unlike most of the others you will find, will help you center your magnet thanks to the centering lip that will also collect the extra glue. This Extruder Visualizer is also designed to ensure a good clearance…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, this model has been uploaded to printables.com . It is made to participate in the “Printed Fabrics” competition. Made wit ronded edges, 2 main sizes, you can make your own size that fits you, or contact me to do it for you. Why did I…
Wydruk około 2,82 €–3,45 € nettoWstępna wycena jednego wariantu
Hey! This Christmas I was thinking of a gift for my sister who likes stained glass art and I figured I'd give a shot to modelling and printing a lamp mimicking the classic Tiffany lamp. There's not much to it, you might have to get a…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena jednego wariantu
This is my first design. Should be used on multimaterial, where transparent red one is designed for tritium rods or can be printed with glowing filament. Also possible to print separately and glue parts together. Now it is designed that…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a way to store a extra parts Lego Kit. A place for parts and the manuals. Also it makes for a nick way to display the models put together. printed at 0.2 layer height using Silk PLA on a Prusa MK4s with MMU3
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
Are you constantly worried about your scraching or even worse damaging the LCD screen on your Prusa printer ? Do you tiptoe around it like it’s a fragile artifact in a museum? Well, worry no more! With my simple yet effective LCD cover…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can tune and soften the soundresonance with snowflakes from Oxa! I use this for the beautiful melodie snowwalz from Johann Strauß! https://youtube.com/shorts/lxx9WU_wVQM?feature=share Please look also for my new bigger 210mmXYZ…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet The strap eyelets on the title picture are printed in PETG Galaxy Silver Caution: The…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I little watch that i am trying to make look like the one in descendants 4.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
This was a project I did for my neighbour's kid who had the handle (fore-end) of his nerf blaster-like toy. This fixed it and actually made it much better than the original was! I've included everything that I used including the .obj…
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
Print this guiding template for easy placement: 0.20mm Standard @BBL X1C Place diagonally PLA Follow this picture for sticker placement: QR code for all Bambu Lab build plates: Textured plate High-Temperature plate Engineering plate Cool…
This is a set of LEGO like bricks used for Prusa Tower model. The bricks are easy to print on the Original Prusa MK3S and should fit the original LEGO bricks. The model is not complete without Lego Josef Prusa, you can download and print…
Intro A clean and elegant twisted spinning top that spins incredibly long and stable . Perfect as a small desk toy, fidget, or simply a beautiful kinetic object. The twisted body is not only a visual highlight – it also helps to keep the…
This is all the 3d printed LEGO® tracks following the L-Gauge train track standard. See YouTube video: Also included is my Solidworks source file so you can modify the length, radius, degree, inner blocks, etc. The models are…
This is a square section of 2020 T-Slot bar or rail (like extruded aluminum). Its dimensions are 20 x 20 x 20 mm. To use it, one would stretch or shrink the height of the model to the desired length. Being made of plastic filament, it is…
Every year my household tradition is to print Halloween decorations for fun. This year I found the amazing Lego-Like Skeleton model from Julia Ebert and wanted to enhance it with some fun Pirate accessories. While there were existing…
Jippy ka Yeee, go back to the wild wild west with this Cowboy Hat for your Mega-Lego-like Minifigure. Printed at 0.16 layerheigt with 3 perimeters, 7% infill, 4 bottom, 4 toplayers and support on the buildplate only. The hat is slightly…
Print Settings: Printer:Any Rafts:No Supports:No Filament brand:Any (my Aurapol) Filament color:Any Grey and Brown Filament material:PLA Notes: 0,24 / 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters…
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
Quite heavily modified version of Julia Ebert's Mega Lego-like Skeleton (10:1 scale) . This version would be 4:1 This version can be printed in one go on mk3 + additional 15min print for the face features. In this remix I've changed the…
Share a photo of the printed model 🗿 Remember to give me a like 👍 https://www.instagram.com/kuleshow/
Minecraft artige Spinne Eine kleine, für print in place erstellte spinne im Minecraft Stil🕷 Eine version mit 2 Gelenken pro Bein Eine version mit 1 Gelenk pro Bein Ich hoffe du magst sie🙂
Some universal hooks for pegboards like IKEA SKADIS or UPPSPEL. Different lengths available. Printed with PLA and 15% infill. No supports needed. Material prize is around 0,05€ for each. Freecad model and .stl files attached. Have fun!…
Print two times this half with two connectors and than glue them together :-)
56 Room Signs Like "The Office" Logo These are residential room signs designed in the style of the logo for "The Office" TV show. Please post your makes so I can see which signs/pictograms are the most popular. Dual Colors with a Single…
I designed a dodecahedron with bluntly rounded points extruded from each face using Fusion360. Inspired by the Star Fragment items in Animal Crossing: New Horizons, they look great in a silk or glow-in-the-dark filament! It prints great…
Made this easy to mass print flat backed version to hand out on Halloween. Does not articulate, nor will it fit nicely with LEGO bricks but it has the right look and the kids like it. It can stand up on its own at this dimension. I made…
When I started printing face shields, I wanted to use larger (4kg) spools. Since the Prusa MINI spool holder is very good, but the lower rails were too short I modified them (now they are 15mm longer). Here you can get the original STL…
TLDR The original lego-like skeleton by Julia Ebert is excellent, but the head is split into 2 STLs which will result in a seam line I've re-exported the model from the included OnShape file and am posting it here for anyone to download…
Because i like vase mode prints :-) here the remix of the LEGO like skeleton head. You can use it as candle light holder for a LED tealight(70% version) or as decoration for halloween. With the vase mode / spiralized print it will have no…
How serious are you about health and safety? Get that spaceman a helmet! Tolerance test file included to check clearance between the helmet and head (the widest and narrowest parts). Printed in: Sunlu PLA+ Resolution: 0.15mm Infill: 15%…
Introduction: Since the big Lego Purge, it was really hard to get any rail design from the internet, until now. Ive constructed any curved standard rail, “almost” in compliance with the L-Gauge standard (…
Lion King Like Simba Funko Style For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG Of course, everyone’s…
I recently bought a Mars 3 along with the Mercury Wash&Cure. Both have a cover that requires two hands to lift, which led to countless resin finger prints all over them. So I designed and printed this simple handle. It was printed in…
All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…
Original: https://www.thingiverse.com/thing:3198581
Baseball cap for the Mega Lego Like Minifigure (10:1 scale) I remixed it from another model to fit this 10:1 maxifig. V3 model printed by myself and it fits snug Printed in PLA 0.2 layerheight with support, 5 to 7% infill will be good…
Introducing Kubic, an ITX PC Case designed for your SFF (Small Form Factor) build, that can take a pretty beefy system for intense gaming sessions and taking cues from the GameCube and the old Power Mac G4 Cube. (Mine also looks like a…
I love the original Lego wreath but I wanted a star to top it off, so I went into Tinkercard and made one. I imported a stud object and using Tinkercad I added a star with a 5mm thickness to the stud. I then imported the STL into…
This is a drip head for my garden irrigation system, based on the Gardena Micro-Drip hose. I use it to irrigate my tomatoes and chillies with the water from my rain barrel. I have put together a short video of my irrigation system:…
I've recently got into making dungeon tiles out of air dry clay. I found plenty of rollers but struggled to find any grids that I liked to mark 1" squares on the tiles after stamping the pattern out so I designed my own. The cutters are…
So you like Rising Sun Board Game? Do you think too that cardboard strongholds, turtles suck? Print this kickstarter-like-ish addons for your Rising Sun game! Turtle has been remixed from Snapping Turtle by xinghcy0311
Remixed Flock of seagulls hair by Skimball to fit the Mega Lego-like Minifigure (10:1 scale)
The original concept by Zack Freedman: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins The more simple/basic version:…
Wanted some treasure for my skeleton pirate to defend.
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
I printed the flintlock pistol and wondered to myself if I could make the musket variant… and here we are! Printed upright in 3 parts to fit on the print bed, each one slides together to create an almost seamless piece. The seam is…
This adapter is designed for the QIDI Box, which is a multi material system. Some filament spools—such as SUNLU rolls with a diameter of only ~195 mm—are too small to rest properly on the front and rear rollers. Instead, they sit on the…
The Batman Model is great, but needs a Superman Companion. So I reused the compatible parts and colored them accordingly. From the remixed Batman I used: Left + Right Leg, colored it blue and some lower part of the legs red (for Superman…
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
Lego inspired Jack-o'-lantern head. This model is compatible with Julia Ebert Skeleton. The separated parts uses the same connectors as Julia's model. A STEP file is provided.
Upgrade your kid's doll playset with this adorable mini hair dryer! Designed for dolls like Barbie®, this hair dryer brings new fun into your child's play with its doll. It prints fast with minimal supports under the handle, so you can…
generated with blender. Will make more in the future.
Regal für Weihnachtswichtel oder Puppenhäuser. 11 verschiedene Regale und 4 verschiedene Boxen.
How do you breathe in space? With an air tank of course. The air tank file is made up of two separate models. Arrange them in your slicer to avoid using supports. Tolerance test file included to check clearance between the tank, neck…
This is an rough model of the cb90. You can make an RC model out of it. You can cut it into parts and use it as a rc boat hull. Category: Models
Introducing the Riva Aquarama RC Boat 1:11 Scale 3D Printed Model! This remote-controlled boat captures the elegance of the classic Riva Aquarama with its sleek lines. This model features easy assembly and compatibility with a variety of…
Two versions tactical vertical grip inspired by Magpul modeled to by printed easily in one piece without suport. Need M3 fasteners. Printing "0.20mm SPEED" 30% Infill 4 Parameters (Because of the clamping) Prusament PETG base settings…
I really enjoy trees and their related care. I always had a Lego minifigure holding a chainsaw as a kid, so I decided to upscale it for my son to play with and learn saw safety. Everything is designed to friction fit together, except for…
Mohawk for the Mega Lego-like Minifigure (10:1 scale) to make your own punkrocker. The pin is the original from the minifigure and you need 5 pieces for the mohawk. After printing glue both halves together, if the fitting onto the head is…
You know these laser-cut plants that you buy, shape and glue to your bases and/or dioramas? Well, I was inspired to make a really, really flat plants in Blender, so you can print them flat on an FDM printer, shape and glue. I'm not sure…
Wall decoration in the swallow shape, in the way of the porcelain that already exists in this type of design. The size is 18 cm and I've made it in two versions, one of which is voronoï to give it a lighter look and let the light through…
Within the cultural tapestry of the Red Sith, the ceremonial flint knife holds a pivotal role as a revered artifact in the intricate rites of passage known as "Vein Racing." or in some family lines as “Sithlume Ascension” This ceremonial…
Belt CLap- Two parts clamp. Easy to assembly. Use two M4 x 12 mm bolts for assembly. This object can be customized or integrated to use in your other projects. Also check out my other models and like them plce.
Get ready for the 4th of July celebrations with this articulating flag of the United States of America! Flex on your friends this Independence Day with this awesome floppy model! Printing Instructions: The 3mf file provided was created…
This is my first big design/remix and made to fit the Mega Lego-like Skeleton (10:1 scale) from @JuliaEbert. https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale I found a pumpkin head wich fits lego minifigs and made…
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
Simple squeegee based on 3M glod series P.A.-1 or Avery's, same flexibility, same size. Quick and easy, and pretty useful not much filament spent. This is the ideal tool to apply build plates sheets like PEI, BuildTak, Kapton or Painter's…
Another strange creation of mine is a keychain from Brawl Stars. Anyone who loves Brawl Stars will understand. If you like this kind of theme, then be active, and I will post more and more keychains on this topic. I have made new…
Introducing CouchBuddy, a modular system to have with you when on your couch. Made to hold your TV remove, phone, snacks, drinks, and many more. The modular set up let's you mix and match as much as you would like, so that you can set it…
prototype Lugworm inspired fishing lure. Haven't yet had chance to try it, Just thought id put it out there for anyone who wants to give it a go. Print one head and tail, then as many body's as you want. I've put colored beads between the…
Originally saw Nomad's Galaxy variation, but was not happy that it does not look like original Core One spool holder. Additional hardware: For Core One + O-ring from the original holder (25x3.5 mm) - you can even print a new one,. For…
CaseOh figure, but like a 1x1 Lego piece
Updates: Parts: camera module pot module button 1 button 2 wheel Print settings: layer hight: 0,2 mm infill: 15% no supports needed Filaments: Prusa Silver PLA (not Prusament)
Mega Lego-like Skeleton loose pumpkin hat that fits over the original head. Print with support and glue parts together
Print the parts. The handle horizontally on the print bed. Apply soft tape to the spot where the sandpaper or emery cloth will be applied (white in the picture). Cut sandpaper or linen 10 mm wide. Assemble the whole thing with M4 tread…
prototype---> dummy 13
I made this model with the intention of using a resin printer, but my resin printer hasn't been cooperating since I designed this. So I apologize for some of the angles for the phone and chin. However, both models printed on my ender 3…
A beautifully sculpted angelic warrior with delicate facial features and massive feathered wings, yet carrying subtle demonic charm. This fantasy figurine stands confidently with hands on hips, featuring clean armor-style surface lines…
Inspired by https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale I've included this as a full print - supports required for the band. And as two parts with no supports required.
Inspired by https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale No supports required.
If you need some bricks print them also plates in many sizes https://www.printables.com/model/761372-lego-like-plates lazy mid tight tight has strong connections i use this ones mid has less stronger connections lazy has very lose…
Adorable little bunny magnets that are easy and quick to print and a great way to make neodymium magnets cute. The little ears provide some grip to lift the bunnies off the fridge in a humane way. Finally tried to pause at layer in a…
Hi, I've design this small trash can look like lego trash can. with no scaling it make 10cm height (small trash can for the office ^^) 3 versions : one file (need support) Complex version => just need support under the can Complex version…
Seriously, who even likes these things? Worst thing to get at Easter. I coated the print in sugar and it tasted the same, minus the chipped tooth (just kidding). This is a fun swap-prank or decoration if you please. I included a picture…
