3223 modeli
Rush hour rules are easy. Clear the way for the red car to be able to leave the parking lot. Cars can move only forward/backward, no lifting the cars! Printing: Depending on the challenge difficulty, you'll need to print up to 4 trucks…
Wydruk około 10,39 €–12,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, here you can download a steering knob designed for Logitech G29 / G920. These parts are needed: 1x Hex Head Screw M5x35 1x Allen Screw M5x40 1x Thread insert Ruthex RX-M5x9,5
Wydruk około 4,37 €–5,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This remix brings a consistent, high-quality texture to your Logitech MX Master 3 / 3S . I modified the model to allow Fuzzy Skin on the external surface of the buttons as well as the shell. This ensures a uniform look and significantly…
Wydruk około 5,22 €–6,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This particular keycap puller was designed and tested with Logitech G512 keyboard, but might very well work with other models and brands. For the best results use the 0.25 nozzle.
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…
Wydruk około 0,99 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have modified the model from Jarda T so that I can simply stick it under my desk with double-sided tape. I used two Tesa Powerstrips ( https://www.amazon.de/tesa-Powerstrips-Doppelseitige-Klebestreifen-Gegenst%C3%A4nden/dp/B000KJOC78 )…
Wydruk około 3,71 €–4,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Centrecap for logitech wheels for the Aliexpress lamborghini badges. Printed with my favourite 3DQF black PLA
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in PLA 0.3 draft layer height with brims. I had to clean up magnet holes a bit before magnets fit snugly in. There was a bit of a gap between front and back so I used a soldering iron to further sink the magnets in place. One…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some…
Wydruk około 12,38 €–15,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
for english see below Kamerahalterung Der zur Logitech Brio mitgelieferte Halter gefällt mir nicht. eine stabile Montage am Monitor gelingt mit damit nicht. Meine Monitore sind an einer Zentralen Monitorhalterung (35 mm Säulendurchmesser)…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sparepart to press on the original centerthing of the Logitech MX Master. No rubber, longlife version.
Wydruk około 0,27 €–0,34 € nettoWstępna wycena jednego wariantu
Logitech G930 headset holder, it's designed to install in 25mm width tables, find below the link to onshape design Soporte para cascos Logitech G930, diseñado para mesas de 25mm de ancho, dejo abajo el link del diseño en Onshape…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Remixed this mount to attach it vertical to the frame of the original prusa enclosure to get a good angle on the printbed. Easy to fix with a bolt and a nut (out of the spare parts in the enclosure kit) to the front frame - see pics. The…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to be able to see the nozzle while printing as I keep having problems with the filament not feeding. I could not find anything that fitted my needs so I designed mine to place the camera where I wanted it and was rigid. It was…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Ножка для клавиатуры Logitech Deluxe 250 Leg для клавиатуры Logitech Deluxe 250. Обе ноги зеркальные. На одном столе. Печатайте с опорой со стола.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Español: Soporte de webcam Logitech C170 para la Ender 3 Pro. Este soporte está modificado para que no choque con la cama caliente. (Ver fotos) English: Logitech C170 webcam support for the Ender 3 Pro. This support is modified so that it…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
Summary This extended attachment for the thread of the Logitech Driving Force Shifter allows an installation on thin tabletops / desks and enhances the stability. Advantages Allows for mounting on thin tabletops Increases the stability of…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
The small slit at the left edge of the camera opening allows to see the activity indicator without opening the slider. For the print, supports are necessary for the “Back” piece. Assembly Insert the slider into the indentation of the…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Why I wanted to get better at using topographic data sources and incorporating them into models. Model Details Data Source The Wellington region topological data was sourced from https://www.opentopography.org/ using the Shuttle Radar…
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
Pták Noh z legendy o Bruncvíkovi Ilustrace legendy
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Small snap-in mount remixed from this tripod adapter (by GioSunrider ) for the Logitech C500 and the original Flexi-Arm mount (by mkoistinen ). The mount replaces the original stand and therefore you will lose tilt and sway functionality,…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Baguette de remplacement pour les cadres de plaques minéralogiques. Deux versions sont proposées: baguette normal baguette avec une petite poignée pour pouvoir la coulisser plus facilement
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this as a way to connect my old webcam to the printer. Used with my Ender S1 Go Pro mount which is listed below, and some go pro accessories to get the right position. It uses the original screws and connects to the camera body…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Tutaj znajdziesz 3 proste elementy, które prawidłowo złożone utworzą piramidę taką sama jak w serialu Diabelski plan. Here you will find 3 simple elements, which, when correctly assembled, will form a pyramid just like in the series…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Re creation (not remix) of https://www.printables.com/model/216076-tightening-key-for-the-logitech-driving-force-gt-w Made for easier printing and added comfort Printed at 0.2mm layer height with 30% zigzag infill Also added .ipj file for…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
doporučuji tisknout s petg nebo pla se zapnutým okrajem a 90-100%infillem.
Wydruk około 0,27 €–0,34 € nettoWstępna wycena jednego wariantu
Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Its a tight fit so that the cable stays where its supposed to You may need some extra tape on the back(probably not): To mount it just put some tape on the bottom: Here is the cable from AliExpress:…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Logitech Z3 Audiophile Upfire Speaker Upgrade Hauche deinen alten Logitech Z3 Satelliten-Treibern neues Leben ein! Dieses massive, 3D-gedruckte Gehäuse verwandelt die ursprünglichen Plastik-Boxen in hochwertige Upfire-Lautsprecher mit…
Wydruk około 12,22 €–14,93 € nettoWstępna wycena jednego wariantu
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Insert du jeu Mythologies avec cartes protégées en 80µm , accès ressources valeurs indépendantes (1&3). Mise en place & rangement optimal. Peut être transporter et ranger dans n'importe quelle position. FICHIERS Support : double fond de…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
ovviamente design Dynamics, si stampa senza supporti e senza viti.
Wydruk około 5,01 €–6,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Originální úchyty pro dvě nádrže přečerpávací stanice a figurky potápěčů indikující pohyb hladiny.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Verwendung: Die Tastatur "POP Icon Keys" von Logitech kann damit inklusive Maus platzsparend aufbewahrt werden. Es kann auch ein Handy oder Tablet noch dazu gestellt werden auf die Ablage vor der Tastatur. Das ganze Set kann mit dem…
Wydruk około 5,46 €–6,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
now on makerworld
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
UPDATE: I reorganized the files so they are easy to find in chronological order for printing and changed some file names for better understanding. I deleted the back plate file from the project due to confusion about what to print. I also…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Clam shell protective case for Logitech MX Master 3 & 3S. Magents Fits together with either four 4x4mm or 6x3mm magnets. Choose the right files below. Location Pegs Cut 2x 8mm lengths of 1.75mm filament. Press fit or glue into the small…
After the great success of " Template For Electrical Diagrams ," I made a version for logic circuits. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/780713-template-for-flowchart-diagrams Template For…
This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print. 3 parts to print: 1x “G29_Center” 1x “G29_Handles_Back” 1x…
This is a simple mounting bracket to attach a Logitech C270 to the Ender 3 X-gantry. It holds the camera at a good angle towards the bed and printing head, with the tilt being adjustable. The camera and bracket itself are attached using a…
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
Just a remixed mount piece for the Logitech c270 webcam. I had already removed the mount plate from my webcam for a previous mount so this lets you just screw that into this piece. (it is/was a bit of a mess around to get the screw in,…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Modular Phone stand for Logitech wheels G29/G27/G25. I used M5 screw with self locking nuts for assembly. The system is modular and adaptable for any smartphone. I use this with simhub dash. Print instructions Category: Video Games…
Prints without supports. I used 0.16mm layer height with 15% infill.
Use original screw to secure on shifter. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Anycubic PLA Grey Notes: Any material does the trick. Category: Gadgets
I've recently encountered some technical difficulties with Printables and Stripe, which means I can't sell the complete version of this model with the screw holes right now. I'm actively working to resolve these issues and hope to set up…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…
Should be compatible with Logitech Headsets G230, G231, G332, G430, G432, G930 but only G332 was tested, and works perfectly. I used Prusa Mini+ with Prusament PLA and default “0.10mm DETAIL” settings in PrusaSlicer. Original author:…
Version 2 is now available for download! Version 2 features a sturdier mounting system that clips in place, no more worries about your webcam falling off the printer! This version also slightly moves the camera back so it has more space…
Update: Added a tolerance test based on feedback from makes. Please check fit with this part and adjust XY scale for desired fit before printing the whole part. Background I took the basic design from my M12x1.75mm shift knob and adapted…
Please keep in mind that this only fits the GPX 2. Enable tree support for cleaner screw holes and easy removal. Can be printed out of any material, preferably stiffer ones, but still very usable even with PLA. Base alone saves around 8g…
This is my take on building the perfect gaming mouse. Just 27 grams, without sacrificing ergonomics. It’s based on the Logitech Superlight 2, and in my opinion, it carries the legacy that Logitech has built over the past two decades far…
Basic case for Logitech MX Master 3. Snaps together with two 6x3mm magnets. The Magnets should be a push fit. EDIT 23.04.2022: I added the raw STL files as requested by albza EDIT 24.02.2025: Added a V2 where the pockets for the magnet…
LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…
Easy to print F1 style wheel. Goes together with glue/epoxy, or if you want the ability to change handles you can use Qty 4 M3x14 screws, Qty 4 M3 nuts, and Qty 8 M3 washers. This design was tested on a G29, but likely fits on G27/G920.…
I had my logiTech headset for a few years but the plastic caps broke and i wasnt able to find any replacements, since the last version that i uploaded i have added two small pins to the inside cap the pins hold the metal part that is in…
I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
Logitech G923 Xbox F1 wheel
Keyboard feet for logitech k270 Printed in PLA
Modified from an existing design, fits with a 5mm x 3mm circular magnet. Glue needed by the way if you want the magnet to not fall off whenever you take finger rest off, since I made the hole to be 5.5mm wide. If you'd like it to fit with…
you can print it without supports use some 1.75mm filament for the hinges
Print however you want to, my settings were pla .4mm nozzle with .15 layer height. The circular hole is designed to accept a 6mmx2mm magnet glued in place(there is a magnet in the mouse so really any small piece of metal glued there…
This model is COMPLETE as of right now, everything fits as it should. I have played several hours of War Thunder and MFS, my thoughts are as follows: The mounting bracket has a very still hold onto the ThrustMaster desk clamp especially…
Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…
Since Logitech doesn't provide any spare keycaps for the MX Keys keyboard, and I didn't want to buy a completely new keyboard I decided to try and make a replacement my self. Once installed it works and feels just like the original. As…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
Left X-Axis Friction Fit Mount I put together to mount my Logitech C920 on the Ender 3 S1. You should be able to use any webcam that has a standard 1/4" tripod mounting screw insert. You will need to print out a 1/4" screw to mount your…
A print-in-place replica of the original logitech cover. Print instructions Printed on my MK3S in PLA at 200um layer height and no support. Update 20210207: On the first version, the lid did not close perfectly. I have slimmed the lid by…
The camera is angled down by 3 degrees. To use this you need a 15mm or so M3 bolt, and a couple of M5x8 bolts and T slot nuts. Remove the monitor bracket from the camera, the mount then fits in place of the monitor bracket. Note the…
Original on Thingiverse: https://www.thingiverse.com/thing:4177079
You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…
The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.
These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…
Saw this video by Optimum on a super lightweight mouse mod and wanted to make my own perfect mouse - both super lightweight and the productivity of my MX Master. The result ends up being 60g total, and retains pretty much all of its…
The original model was perfect for the 92 base size keys, but the other 18 keys all had additional sizes. Popped off measured and tested all of the other sizes and they all fit and work. Caps was the most tricky, but what Ive got here…
A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…
Original description: https://blog.exz.me/post/logitech-g604-mouse-scan-data-and-rubber-replacement/ See original upload for links to scans themself https://www.thingiverse.com/thing:6569173/files
Case for the Logitech MX Master 3 and its wireless receiver. 8 6x3mm magnets needed.
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Update [23.7.2025] added versions for 25mm and 20mm long screws. *Added at the request of @SamC_3382651, I haven't printed them personally, but they should work without problems. Hello. I have a Logitech G Pro Wireless…
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
