370 modeli
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor. Sensor gets mounted with a single M2 - M3 screw and nut while the switchplate gets screwed into the wall using 4 tiny wood screws around M3. The hole this mounts…
The Leica M320 surgical microscope is state-of-the-art technology. Nevertheless, hazards can arise during operation.
Print Setting PETG 0.3mm draft
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
Originally published here: Samsung Galaxy A32 5G a326 case by tato_713 - Thingiverse Thanks to Phil Nottelling , Samuel Miller and Alex Monk for testing the test version of this case. This is the test case for the Samsung A32 5G version…
Compatible with: Extruder: M3202 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers M3204 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers (Linear Rail Edition)…
Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/
Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf DN50 (z.B. HT-Rohr) mit 50mm. Ich verwende diesen Adapter um schnell und einfach einen (zusätzlichen) Zyklon in meiner Absaugung zu installieren. Hierzu habe ich den DN50…
Quick clamp for protective tube Klemmschelle für Schutzrohr Printing information Layer height: 0.32mm (0.6 nozzle); 0.20 (0.4 nozzle) Infill: 15% Support: none Brim: recommended I am looking forward to your Makes! :-) If you like this…
A little case for the ST Microelectronics Nucleo-64 Development Kit. Check the list below for compatible boards. The board should sit quite firmly in the case itself and is held down by additional screws. The screw on the left side is…
I integrated a slip ring into M32H32. Ich habe in den M32H32 einen Drehring eingebaut. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis…
The spacing between the holes in the bottom is 18 mm. There are three 2 mm holes for mounting the Nucleo board. You need mini screws like DIN 7981 2,2 mm x 6,5 mm. The holes in the bottom are 3.5 mm to comfortably fit M3 screws. Other…
The pictures show a dual color, (just stopped the print and restarted with a new color) but these work great. we have one ipad mini used for spotify and the other allows us to look at settings different from the display. but we can just…
This Adapter is made for a vacuum hose with an inside diameter of 32mm, outside diameter 38mm to the male part of the osVac System. Every hose between 36-40 outside diameter should work, I use this vacuum hose from Amazon:…
This is an osVAC adapter for festool "Tauchsäge TS 55". It may fit all other festool tools as well. For more information about osVAC see here: https://www.thingiverse.com/hobbyhimmel/collections/osvac-adapter Print Settings Printer Brand:…
Because the model of @Agar_146696 ( https://www.printables.com/de/model/68604-osvac-adapter-m32-dn50 ) was not long enough, I've designed this new version. Edit: After we've made aware by @Charly_Brown_539474 that the outer diameter was…
This is a case for the popular GM328A transistor tester. The case is able to be printed with no supports, and requires Four M3 socket head screws and four M3 square nuts to assemble. The circuit board is captured between the top and…
Der Flansch Innendurchmesser ist 50mm. Ich nutze ihn an meinem Fräsanaschlag.
I needed a decent case for the recent edition of gm328, but did not want to fiddle with screws. Found a good model by machanzar and tweaked it slightly. It should not require any screws now and works with a friction fit. Worst case…
Compatible with: Extruder: M3213 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 4020 Blower Probe: BL-Touch 3D Printer Model: CR-10S…
A minimal, protective half-case for the STM32 Nucleo-144 development boards, with heat set inserts and screws.
This is an osVAC neo M32 to H32 adapter for Kärcher (and other) hoses with 32mm inner diameter. osVACneo-H32M32-02 works best for 0.4 nozzles at 0.2mm layer height osVACneo-H32M32-03 works best for 0.6 nozzle at 0.3mm layer height If you…
Compatible with: Extruder : SKU M3206 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 V2 / V3 Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 5015 Blower Probe: (The NG Extruder does not interfere with…
This is a collection of metric lock nuts (counter nuts) for cable glands , designed for use with standard metric cable gland thread. The nuts are intended as replacement or custom lock nuts for control cabinets, junction boxes,…
This is a osVAC M32 adapter for the Bosch GEX 12V-125 orbital sander. With the F32 counterpart for the original dust collector. There are 3 models: Bosch 12V M32.stl: the standard model. Bosch 12V M32 Tight.stl: a tighter version. For…
There are many variations of the GM328A component tester, this case is for the “2022 Type-C” model. There are many variations of these boards out there and none of the other cases fit my model or my needs. The files are pre-oriented for…
A little case for the ST Microelectronics Nucleo-144 Development Kit. Check the list below for compatible boards. The board should sit quite firmly in the case itself and is held down by additional screws. The screw on the left side is…
Nothing much to say. Got a used Festool OF 1010 Router and a running OsVac System in my Workshop. Here is my quick and dirty Adapter. Printed it with ABS, but i guess PLA is better as u see the “non flexible” Bending Areas on the Fotos.…
This is a small box to hold an ESP32-Wroom32 micro controller, a level shifter and a female power plug. It uses M2 screws. Can be printed without any supports. Used Parts: These are just examples, not recommendations. The parts are…
Simple adapter to mount an F32 osVAC socket to the Makita DRT50 dust collection. It's printed in PLA, snuggly fits onto the dust collector. Print it with the M32 plug topside, then you sould not need any supports.
This case is based to the GM328 "SMD" black board dimension bought on famous chinese site. It is not suitable with the board with standard components, The idea was to print a full case and have the opportunity to use a 9V battery or…
Slide cases for every 64 pin STM32 Nucleo boards.
I was looking for an M32 adapter for the Mirka Deros - created from osVAC Neo Male and Mirka Deros Adapter as stated below. Thx for this great open-source vacuum system. Works like a charm and tolerances to the powercord of the sander are…
For best effect print with PET-G (PLA is also fine, but the clips will be less flexible). Prints without supports. In the photo: NUCLEO-H563ZI
Updated 07/09/2022 A bracket has been added for use on ikea skadis or similar murals. ********************** First I want to thank the user JAAANIK for his cool design "PARKSIDE X20V TEAM KSGER STM32 OLED T12 PORTABLE SOLDERING STATION"…
Adapter to fit the Bosch Professional GCM8SJL to the osVAC platform. Remix of original Thing ID 3734911. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. To have smooth surfaces on both…
Great base by loco but I needed to throw it in my bag, so I created a lid for it. Two versions: one with text and one without. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15…
Super-simple, minimal bumper for ST Nucleo F4* / Nucleo 64 MB1136 boards.
NG Extruder fan shroud, X Limit Switch Bracket, CR-Touch mounting bracket for the Ender 3 V2 Neo
Included in the attachments is the parametric Fusion 360 design and the label design
M32 male adapter I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
osVAC neo M32 Staubsaugerdüse / Vacuum cleaner nozzle
Hi, I could not find the right version(s) for a kinda small footprint blast gate, so I modeled my own. You can mix and match the parts the way it fits your needs. You'll always need: 2 spacers 1 slide 2 baseplates Furthermore you need 6…
Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf Innendurchmesser von 39mm, bzw. Außendurchmesser 44mm. Der Außendurchmesser verläuft leicht konisch auf 45mm an der Übergangsseite (für besserer Halt) Meine Bandsäge (Metabo BAS…
Full-featured case for GM328A TFT Transistor tester variant and 18650 Li-Ion battery. Charger module is Q3962A with attempt at light conductors for it's indicators (and it actually works). Step-up module is MT3608. Knobs are from some…
This is a osVAC M32 adaptor for Makita SP6000 track saw vacuum cleaner outlet. The adaptor has a cone shape (starting at 35.4mm and ending with 35.6mm) so that is sits tight in the original adaptor. It can be use on other tools too as…
Passend zum osVAC System hier ein (ca. 75 Grad) Winkel mit M32 (Geräte-) Adapter auf F32 ("Base-Adapter"). Dieser Adapter findet an meiner Bosch GTS 635-216 Verwendung. Diese habe ich zum direkten Anschluss an das osVAC System umgerüstet…
Mobile phone holder to operate the Midas M32 and display processes/ information for better work. If necessary, the angle can be changed so that the Midas can also be operated in a sitting position.
I bought a Kärcher suction hose extension and unfortunately it does not have a 32mm hose as the one that came with my Kärcher vacuum, but has an inner diametre of 35mm. So I created this M32 to H35 adapter. Hint: the first 5cm of the…
osVAC neo adapter DN40 to M32 osVAC neo adapter DN40 to F32 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament:…
osVAC neo adapter M32 to DN40 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament: Geeetech PETG white…
I finally decided to buy this little, high precise, expensive tablesaw and searched for an already available osVAC adapter, but all which i found for festool seemed unsuitable here (yes, i started to print some of them to test them with…
Compatible with: Extruder : SKU M3205 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 6 Printers Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: none 3D Printer Model: Ender-6
This is a 60 mm male adapter for the osVAC system by Hobbyhimmel. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von Hobbyhimmel:…
Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf (Innen-)Durchmesser von 44mm. Grundsätzlich auch mit Außendurchmesser 48mm verwendbar. Meine Kappsäge besitzt einen Absauganschluss mit Außendurchmesser von 44mm, zum Anschluss…
The low cost bluepill board can be converted into a blackmagic probe, which supports JTAG/SWD debugging of many targets. To do this DFU/blackmagic.bin is needed, can be programmed onto the stm32 using serial bootloader or with an STLINK.…
Adapter to fit the Bosch Professional GCM8SJL to the osVAC platform. Remix of original Thing ID 3734911. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. I printed it with PLA and it…
In meiner Werkstatt nutze ich eine Absauganlage, die ich mittels dem osVAC System an den Geräten anschließe. Grundsätzlich kann man eine Bosch GTS 635-216 auch mit einem Standard osVAC (F32) Maschinenadapter anschliessen. Da der Platz auf…
OsVac M32-Apdater für Bosch GTS 635-216 / OsVac M32-Apdater for Bosch GTS 635-216
I originally made this oil funnel for my 10th gen Handa Cevic 1.5t. The m32 x3.5 thread fits on this model ,the m33 x2.8 thread is for the older models.
This is a functional and aesthetic case for the STM32F429-DISC1 board. Gives access to all of the necessary GPIO pins/inputs, screen, and peripherals. The case is a 2 piece design with a bottom and top shell. Assemble with 4-M3x12 socket…
Neuer Fräsanschlag, neuer Anschluss Für meinen neuen Fräsanschlag habe ich einen neuen Anschluss konstruiert. Der Flansch hat eine Kantenlänge von 70mm. Der Anschlag wurde aus 12mm Material gefertigt.
This is an osVAC adapter for the Metabo Planer DH330. The larger end has an inner diameter of 65.5 mm. Printed with 50% infill, a brim, and the large end touching the bed. ********************* Dies ist ein osVAC-Adapter für den Metabo…
M32x1.5 threaded blind stuffing to close unused M32-openings. Unused PG29-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Adapter for the Dewalt(TM) Airlock(TM) System to fit with the osVAC platform. Remix of original Thing ID 4512926. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. I printed it with PLA…
This is a adapter for the quite popular Bosch GTS 10 XC professional table saw to a dust collector system using the osVAC system. The adapter fits neatly in the recess of the table saw. On the dust collector end is a male 32 osVAC…
This is a 76mm M32 Tank Shell and casing. So far, I can only produce the shell and not the case, so for now, the shell will be for the case, unlike the case.
This is a osVAC M32 adapter for the Bosch GST 12V-70 jigsaw. It is secured with 3 screws. The inner diameter is 28 mm, maybe it fits on similar tools. You'll also need: 3* 3x10 wood/universal screws (optional) o ring R21 I recommend to…
osVAC neo M32 adapter for Makita DSP600ZJ The adapter is clamped by means of a screw (M3x10) and nut (M3). This allows the adapter to be mounted and dismounted very quickly and easily. Since the machine with mounted osVAC adapter does not…
Updated : Added additional ribs for support. This is designed to have the short M3 heat-set inserts put into it. Personally, I use the ones from CNC Kitchen . I use M3 6mm socket head cap screws. This should work with all NUCLEO 64…
This an osVAC neo M32 adapter with handle for Kärcher accessories. --- Ein osVAC neo M32 Adapter mit Griff für Kärcher Zubehör.
Hi, this is the case for STLink-V2 programmer which is part of STM32 NUCLEO boards (64 pins or 144 pins). The programmer can be separated from the board and used as standalone device. All available pins are exposed (SWD port, TX, RX, GND,…
I just wanted a basic case for the STM32 Blue Pill board. I couldn't find one that was a basic case much like many of the other cases for similar sized microcontroller boards. It has openings for the jumpers, the button, usb and…
Passend zum osVAC System hier ein "Blindstopfen" mit M32 (männlichen) osVAC Adapteranschluss. Damit lässt sich einfach Schlauch an der Kupplung (F32, "Base Adapter") schnell verschliesen. Recht praktisch falls man z.B. mehrere Schläuche…
osVAC adapter for FESTOOL machines For me, the "longer version" of the osVAC FESTOOL adapter did not work on renovation milling machine RG 130 E-Plus. So I have built from the "longer version" an "even longer version" ;-) Technically…
OSVac M32-R41 (41mm inside dimension) Check out our YouTube channel for more maker and osvac content: https://www.youtube.com/c/Bastelsaal You like our work? Feel free to buy us a coffee! ❤
osVAC M32-R50 (50mm inside dimension) We used the part in this video: https://www.youtube.com/watch?v=fklvx3djcHE&ab_channel=Bastelsaal You like our work? Feel free to buy us a coffee! ❤
osVac adapter for Scheppach HMS850 jointer & thickness planer. Thanks to https://www.thingiverse.com/tokenizer for the great Fusion 360 files! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No…
This is an osVAC neo M32 to H20 adapter for 20mm hoses. I am using a 20mm Mirka hose with this osVAC neo F25-H20 adapter to connect my machines. Works flawlessly! osVACneo-H20M32-02 works best for 0.4 nozzles at 0.2mm layer height…
This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build. BOM: ESP32 Wroom with 38 pins and a wired WiFi antenna SSD1322 display ESP32 expansion board rotary encoder PCM5102 DAC…
Couldn't find any printable case for my new dev board, so I went to design my own. While doing it, I had to model the board itself first. This is a simplified 3D model of the new Black Pill development board with stm32f4xx (I got the…
Good day, printhead's! Designed this for my workshop Dewalt DWE7492 power tool vacum connection. Also, because I use osVAC system all over the shop, added male end to both vacum connections. osVAC male ends M32 Dewalt outlet D60…
Use the FCStd files if you wish to change the models in FreeCAD, and use FreeCAD 1.1 or later. Use the STEP files if you wish to change the models in some other CAD. Use the STEP or STL files to print as-is. The STEP files may need to be…
A simple case for new black pill dev board (version with stm32f411x, should be compatible with stm32f401x, not to be confused with old black pill with stm32f103). No screws needed, top should snap on the bottom. Bottom holes should fit…
NG Extruder fan shroud, CR-Touch, and PTFE mounting brackets for the Ender 3 Max Neo
This super expensive Bosch GOF 1600 router has a super unusable vacuum adapter. Which on top breaks easily. This one is hard to destroy. The router can be used almost to minimum depth. OSVac fits directly. Print with PETG, 30% infill, 0,2…
Print with support for the Electrolux recess. OsVac neo M32 has tight tolerances around the notches and might require sanding. In case of elephants foot, smooth out the inner edges of the Electrolux compatible part. Thanks to TOKENIZER…
Hardware needed: 8x M3x10mm screws 4x M3 nuts Rocker switch 29x12mm (feel free to remix if using different one, hole in default design is 30x13mm, max depth is 27mm) 9V battery and connector Panel mounted 4MM banana sockets GM328A board…
Ein Adapter von osVAC neo auf Festool z.B. Dominofräse DF500
Jedná se o remix modelu friction fit GM328A case od autora kolba Přidány číslice 1112333 pod měřící objímku, upraven výřez pro displej (je vidět pouze displej), přidáno osazení pro hlavičky šroubků, spodní část zvětšena tak, aby se…
osVAC Adapter for a 40mm hose.
Since I'm switching my tools completely to osVAC, this was missing. Thanks to the osVAC neo library I created an adapter for the Bosch GEX 18V-125. It fits very well, but I might make it slightly more tight. osVAC System:…
This is an osVAC adapter for the R4518 Ridgid Table Saw dust port. The larger end has an inner diameter of 63 mm and fits snuggly on the dust port. Printed with 50% infill, a brim, and the large end touching the bed.…
This is an osVAC M32 blast gate plate. The only file included is the male plate. The other parts can be found here: F32 female plate: https://www.thingiverse.com/thing:5189896 Slider and spacer: https://www.thingiverse.com/thing:4382243…
OSVac M32-R42 (42mm inside dimension) Check out our YouTube channel for more maker and osvac content: https://www.youtube.com/c/Bastelsaal You like our work? Feel free to buy us a coffee! ❤
osVac adapter for Einhell TE-RS 18Li excenter grinder. 2022-01-28 Update: I have added the Fusion 360 files, but please note, I am a beginner in Fusion 360 and still learning ;) I am always open and thankful for tips and improvement…
A german translation can be found after the english one And another adapter for the Metabo KGS216 to osVAC M32 ... :-) There are already one or two models for such an adapter, but somehow I couldn't find the right one for me. Sometimes an…
Einfaches Übergangsstück im Osvac System für die Absaugung des Triton Spindelschleifers
This is a connector for osVAC neo (osvacneo.de) (M25 or M32) to DeWalt™ AirLock™ compatible twist-lock machines. I used it for my DWE6420 Orbit Sander. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports:…
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
![M3202 Ender-5 / 5 Pro / 5 Plus [Micro Swiss NG Extruder] - Fan Shrouds and Brackets](https://media.printables.com/media/prints/752863/images/5874787_8bffd4fb-4eb5-421b-88d9-65f5b8c4600b_20be6ab3-368f-446f-9baa-60e0dd019b02/4ngender5_2400x2400.webp)
![M3213 CR-10S Pro V2 / CR-10 Max [Micro Swiss NG Extruder] - Fan Shroud and Probe Bracket](https://media.printables.com/media/prints/708204/images/5555713_8b7f26de-9baf-492a-88e8-974cc5c550c3_fc37e3b0-22ff-4c0a-b299-f9c920073f02/image1.jpg)
![M3206 CR-10 V2 / V3 [Micro Swiss NG Extruder] Fan Shroud](https://media.printables.com/media/prints/752962/images/5875597_b383ef1d-79a6-4d81-bdf3-a06cf370838c_35d54b7d-4eb3-41b7-9b81-007e1b135d95/ngcr-10v2v3main2_2400x2400.webp)
![M3208 Ender 3 V2 Neo [Micro Swiss NG Extruder] - Fan Shroud and Brackets](https://media.printables.com/media/prints/723984/images/5670896_6ae9ad0e-48a2-408e-bc24-8fe247105149_26b4196b-0af7-4277-aae7-0058a5cc0302/image1.jpg)
![M3205 Ender-6 [Micro Swiss NG Extruder] Fan Shroud](https://media.printables.com/media/prints/752947/images/5875505_17f149a5-bb91-4366-a4bc-c0ad82a8a4fe_af8befb9-887e-4138-9dd5-dc527ac7cf2f/ngender67_2400x2400.webp)
![M3209 Ender 3 Max Neo [Micro Swiss NG Extruder] - Fan Shroud and Brackets](https://media.printables.com/media/prints/723783/images/5669771_5d6359f7-6772-4ce8-b161-568c14e01f29_a2075682-b1f9-48e3-b69f-8495ea43f747/photo-jan-02-2024-4-19-26-pm.jpg)
