Wyniki wyszukiwania: m39

Sortowanie

61 modeli

P
Printablesblechbude

Trichter für 5 Liter Kanister zum aufschrauben; Funnel for 5-liter canisters, screw-on type; M39,5 x 4

Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…

Pobrania
544
Polubienia
122
Ocena
5
P
PrintablesZiemniaczenka

Sony E to M39 adapter

Use supports for E-mount Thread clearance is 0,1mm. Flange focal distance = 28.8 mm. So far tested only with industar-61 from FED camera.

Pobrania
437
Polubienia
24
Ocena
5
P
PrintablesLeucoemeraldine

M39 EMR Airsoft Rifle w/ CYMA Version 7 Gearbox

Updated on 11/7/19, scroll down to that for better information! I downloaded an existing M14 EBR model from an upload on sketchup. Original model credit to Rabid Beagles there. https://3dwarehouse.sketchup.com/by/wujoberto Then I used…

Pobrania
215
Polubienia
23
Ocena
0
P
PrintablesFrederik

M39 rear lens cap

Supports: No Resolution: 0.0977 or 0.1954mm layer height (multiples of the thread) Notes: If you're printing in ABS, make sure to account for the shrinkage. Post-Printing Screw in the lens carefully for the first time to make sure you're…

Pobrania
214
Polubienia
15
Ocena
5
P
Printableshuman1976

M39 on Canon RF

Printer brand: Anycubic Printer: Kobra Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament brand: Hi-Tech Plast Filament color: Black Filament material: ABS

Pobrania
185
Polubienia
19
Ocena
0
P
PrintablesShimon

Canon EF / EF-S to M39x1

DISCLAIMER Due to the different distance between the lens and a DSLR sensor/film, the lens can not focus properly, it only focuses on very short distance.

Pobrania
163
Polubienia
13
Ocena
5
P
PrintablesKirill_Maker

m39 to M4/3 adapter

m39 to M4/3 adapter. Now it's fits accurate and also have focus to infinity too. M39x1 (flange 28.8mm) to M4/3 (flange 20mm) I also added ribbed tube to avoid reflections. It's will be better if you will print it in black color with matte…

Pobrania
161
Polubienia
11
Ocena
5
P
PrintablesEmpiricus

M39 to EOS M adapter

M39 to EOS M adapter. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 10.8mm. Wet sand with 400 grid if required.

Pobrania
160
Polubienia
15
Ocena
0
P
PrintablesDusterLE

Keyboard Leg - Lenovo 4X30M39466

Right side, without supports

Pobrania
158
Polubienia
7
Ocena
5
P
PrintablesChris

C-mount to M39-mount extendable extension for Raspberry Pi HQ Camera

This is part of my attempt to create 8mm(R/S) / 16mm film scanner, where the two pieces will be connected and attached to a Raspberry Pi HQ camera (C-mount) and then a Schneider Componon-S F2.8/50mm lens (M39 thread). Short design video…

Pobrania
125
Polubienia
4
Ocena
0
P
Printablestomk0014

Photoresistor Enclosure - LM393 (4pin)

Presenting a two-part model consisting of a case and cap, tailored for the LM393 (4-pin) sensor. Streamline your assembly process with this user-friendly design—no supports required. Simply slide the LM393 sensor into the case and…

Pobrania
118
Polubienia
3
Ocena
0
P
Printablesrodsgear

P&S Compact camera lens conversion adaptor to M39 LTM with RF coupling

Update - Dec - 28 - 2021 After one and a half years doing those conversions and many successful lenses I'm now pretty confident with this design. The M36 thread that act as the focus helical has been redesigned now with a dual start 1.5mm…

Pobrania
114
Polubienia
23
Ocena
0
P
PrintablesHonzik1

USB Quick Charge 3 M398D case with USB plug

For USB plug use FLEX material.

Pobrania
89
Polubienia
15
Ocena
0
P
Printablessputnik

Jupiter-12 rear lens cap (M39x1)

This example was printed in CF reinforced PETG at 0.2mm layer height.

Pobrania
75
Polubienia
4
Ocena
5
P
Printablesrodsgear

Yashica T3 Zeiss 35mm f 2.8 to M39 Conversion

I have this broken Yashica for sometime and now since I have access to 3D printer and Fusion 360 software I was able to successfully achieve this conversion. The focus helicoid is a simple M25 thread and it was inspired by the early leica…

Pobrania
72
Polubienia
11
Ocena
0
P

M39 to C-mount Lens Adapter + Macro rings

I printed at 102% XY scale, Z 100% (depends on your printer/filament) layer 0.125 Use graphite lube to make smooth joints.

Pobrania
70
Polubienia
4
Ocena
0
P
Printablesklemen787

M39 bolt with nuts

coll print for relax and playing with it :)

Pobrania
67
Polubienia
9
Ocena
0
P
Printableskeithellis

LM393 light sensor case

Case to hold an LM393 light sensor. I am using the LM393 to measure the pulse indicator on an electricity meter. The sensor is plugged into a microcontroller running mysensors.org sending the data into my Home-Assistant instance To get…

Pobrania
65
Polubienia
2
Ocena
0
P
PrintablesBuild-0-Matic

Leica M39 LTM focusing adapter for broken Point & Shoot camera lenses.

This is an adapter designed to mount lenses from cheap broken Point & Shoot cameras on rangefinder cameras that use the M39/LTM mount like old Leicas. The design is printed in multiple parts which are correctly oriented for ease of use.…

Pobrania
65
Polubienia
11
Ocena
0
P
PrintablesProfHankD

Adapter for M39x0.75mm Enlarger Lens on Sony E Body

This is a simple focusing adapter that I made for my Rodenstock Omegaron 150mm f/4.5 enlarger lens to be used with my Sony E-mount cameras. This particular enlarger lens has a 39mm diameter thread with 0.75mm pitch -- beware that many…

Pobrania
62
Polubienia
9
Ocena
0
P
PrintablesMichl

lens- & bodycap for M39/L39 mount

lens- & bodycap for M39/L39 mount

Pobrania
58
Polubienia
8
Ocena
4
P
PrintablesSalvaMTB

Lens adapter, M39 to micro 4/3 (INDUSTAR-69 shorter flange)

The M39 thread has been placed so that the red focusing mark on the lens is facing up (on my copy at least). The red dot on the adapter is “kids' jewelery” I found at a cents store.

Pobrania
57
Polubienia
9
Ocena
0
P
PrintablesAlex_Usovich

Beseler 23C Enlarger Lens board with translucent viewing slot and M39 Jam nut

I bought another enlarger lens to do a sharpness test between lenses but wasn't about to drop $50 for a used lens board. With some CAD magic and a few drafts, I was able to come up with this. This lens board is for M39 lenses and includes…

Pobrania
50
Polubienia
7
Ocena
0
P
PrintablesMarek Sokal

M39/L39 - FX Adapter. Leica Thread Mount to Fuji X

I recently got a Canon LTM 50 1.8 for my Canon P and remembered that I had made the MUP to LTM mount. So I stayed up late making some L39/M39/LTM - whatever you want to call this mount - stuff. First is a L39 to Fuji Adapter - this post -…

Pobrania
47
Polubienia
3
Ocena
0
P
PrintablesEmpiricus

M39 to EOS M adapter

M39 to EOS M adapter. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 10.8mm. Wet sand with 400 grid if required. Empiricus@Dremomys Category: Camera

Pobrania
40
Polubienia
5
Ocena
0
P
Printablesleviking

Screw on M39/L39 Leica screw cap LTM

Screw on lens cap for LTM lenses. You can print threads, even 0.977mm pitch threads - if you can't it's a skill issue.

Pobrania
39
Polubienia
3
Ocena
0
P
Printablesrodsgear

Kodak P&S to M39 Lens conversion

After almost two years of development I recommend you check my up to date design if you interested in such subject. www.thingiverse.com/thing:4540492 This is a test of concept for converting Point and Shoot lenses to M39 mount. It can be…

Pobrania
37
Polubienia
9
Ocena
0
P
PrintablesFAN 3d studio

M39 Egg Grenade

M39 Egg Grenade replica

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesREDBEARD-PRINTS

Multimeter Set Stand & Probe Tweezers Reworked fit EM393B

I made the Stand and the Tweezers Fitt my EM393B Multimeter. Works like a Charme. Build in PLA - 45%!!!! Infill - 0,4 nozzle - 0,2 layer hight Org stand: https://www.thingiverse.com/thing:7195643/ Org tweezers:…

Pobrania
37
Polubienia
7
Ocena
0
P
Printablesblechbude

M 39 Objektivdeckel, lens rear cap, LTM Leica Gewinde, Rückdeckel, Leica thread, M39x1

Deckel mit M39x1 Gewinde für die Anschlußgewinde von Objektiven mit LTM Leica Gewinde. Der Deckel ist mit inneren Tiefen von 10mm, 16mm, 22mm und 26mm verfügbar. Der Deckel mit 10mm Tiefe paßt auf alle normalen Objektive. Manche…

Pobrania
37
Polubienia
3
Ocena
5
P
PrintablesTlangphoto

Dunco M39 enlarger lens mounts

These files are for different stack heights for the lens mount for Dunco enlargers. Heights range from 3mm to 30mm Feel free to contact me with any questions or requests

Pobrania
24
Polubienia
3
Ocena
0

canon EF - nikkor M39 helicoid adapter

As it is a basic design for verification, there is a risk of the lens falling off while focusing. Please use it carefully.

Pobrania
24
Polubienia
0
Ocena
0
P
PrintablesFrederik

Jupiter 9 LTM M39 Lens Hood

This lens is really prone to reduced contrast from stray light, so I made the hood a bit longer. I only tested this on the Leica Thread Mount (M39 thread) version of the lens. This slips on the outside of the lens and holds on with…

Pobrania
22
Polubienia
1
Ocena
0
P
Printableshuman1976

Adapter T-43 4/40 for m39 thread

Adapter T-43 4/40 (Smena 8M) for m39 thread (using a helicoid from the Industar 61 L / D lens) It is necessary to get rid of the lens block of the lens Industriar 61 L/D. (Look for instructions on YouTube) Remove the T-43 lens (Look for…

Pobrania
20
Polubienia
4
Ocena
0
P
Printablesjoostprusa

A mobile pen/pencil/caliper holder with M39 nut base for stability

I designed a small pen, pencil and caliper holder that I can move easily around the work bench and does not easily fall down. In my shop I like to have as much free work space on my desk as possible. Personally I do not like to have a lot…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesblechbude

M39 Kamera Gehäusedeckel; M39 camera body cover; M39 x 1 Gewinde thread

Deckel mit M39 x 1 Gewinde für Kamera Gehäuse. Zwei verschiedene Versionen. Den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe drucken. .................... Cover with M39 x 1 thread for camera body. Two different versions.…

Pobrania
14
Polubienia
0
Ocena
0
P
Printablesblechbude

Leica Schraubdeckel für das Summicron 50mm f2; screw cap; M39 x 0,5 Gewinde thread

Deckel mit M39 x 0,5 Gewinde zum Aufschrauben auf das Leica Summicron 50mm f2 oder andere Objektive mit gleich großem Gewinde. Drei verschiedene Ausführungen. Den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe drucken.…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesAriX

Filament sensor adapter with tacho speed encoder LM393

This is a simple filament guide to use a cheap LM393 sensor as filament sensor. It is inspired in the filament sensor of Prusa i3 mk3, but simplifying the requirements and the cost. BOM: 1 x ball of 3.85mm. You can get this disassembling…

Pobrania
13
Polubienia
0
Ocena
0
P
Printablesblechbude

Nikon Gegenlichtblende für Nikkor H 5cm f2 M39 LTM; lens hood

Gegenlichtblende für das Nikon Nikkor 5cm f2 M39 LTM Objektiv mit M40,5 x 0,5 mm Gewinde. Benötigt Stützmaterial. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. .................... Lens hood for the Nikon Nikkor 5cm…

Pobrania
12
Polubienia
1
Ocena
0
P
Printablesp1xel

Canon EF-M to M39 SLR / Zenit 39mm Lens Adapter

This is an EF-M to 39mm screw-mount adapter for M39 SLR lenses , commonly found on early Zenit-style Soviet lenses. Tested with an Industar-50 50mm f/3.5 M39 SLR lens on a Canon EOS M body. This is not for Leica Thread Mount / L39…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesHamster

Lens Bubble for Enlarger Lenses. (L39/M39/LTM)

This is an Enlarger Lens Bubble / Protector / Keeper that mates with the screw-on measuring cap from P&G laundry detergent such as Tide / Gain / Aerial. Forming a protective enclosure. It will also fit other Leica thread mount lenses such…

Pobrania
12
Polubienia
6
Ocena
0
P
Printablesleviking

L39/M39 HSW Mount

Needed a better way to store lenses

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesClutcherButcher

Air Fuel mixture reader with stand for 10 LEDs & LM3914

Can be secured by screws or glue, support not needed. For more details, print in 0.1mm layer hight. Recommended wiring diagram:…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesDavid_Netušil

Držák MASTECH M3900

Držák na stůl pro multimetr MASTECH M3900

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesiAndrux

M42 to M39 adapter

Резьба под объектив уменьшена до М39 шаг 1

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesManu

Pied gauche clavier Lenovo 4X30M39469

Pied gauche de remplacement avec réutilisation du patin flex Category: Replacement Parts

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesAlxLeo

Sony E Mount M39

The adapter consists of several parts. You can choose from 2 versions of the model's third part—whichever best suits your lens. Assemble the adapter using super glue. Once assembled, the adapter cannot be taken apart. Thanks to the author…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesAlxLeo

Sony E to M39 adapter with focusing ring

This adapter enables focusing for lenses that lack a built-in focusing ring and have a flange focal distance of 28.8 mm, such as: Industar-50U 3.5/50 Industar-96U 3.5/50 Vega-11U 2.8/50 For lenses with a 50mm focal length, the minimum…

Pobrania
6
Polubienia
1
Ocena
0
P
Printableshipsqr

Lomography Fisheye No.2 35mm to M39 Leica Thread Mount Adapter

A 3D printed adapter designed to mount the Lomography Fisheye No.2 35mm film lens system onto the Leica M39 LTM screw mount standard. This allows the circular 170 degree fisheye lens from the Lomography 35mm film point and shoot camera to…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesAlxLeo

Sony E-mount adapter for M39 lenses V2

Designed for M39 lenses with a 28.8 mm flange focal distance. The adapter consists of two parts that are glued together. The upper part of the adapter comes in two variations: conical or cylindrical. The parts are assembled using super…

Pobrania
5
Polubienia
0
Ocena
0
P
Printablesblechbude

Avenon Kobalux 21mm f2,84 Ablage, lens rest tray LTM M39

Ablageschale für das Avenon Super Wide 21mm f2,8 Objektiv mit M39 Leica LTM Anschluß. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. .................. Storage tray for the Avenon…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesHamster

Gauthier IBSOR No.3 Shutter Retaining Ring (M39x0.9)

A 3D-printable retaining ring for Gauthier IBSOR No. 3 Shutter. The thread specs is revers engineered from the only IBSOR shutter I own. Shutter manufactured during this period do not have consistent thread specs, so a little…

Pobrania
2
Polubienia
1
Ocena
0
P
Printablesblechbude

Leica Adapter M - M39 Montagewerkzeug: Leica Adapter M - M39 mounting tool

Einfaches Werkzeug um den Adapter Leica M Bajonett auf M39 Leica thread mount am Objektiv zu montieren oder zu demontieren. Je nachdem wie fest der Ring am Objektiv festgeschraubt ist, hält das Werkzeug oder es brechen die Noppen ab.…

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesManuel

Leica LTM/M39 to Leica M Adapter Cover for 6bit coding window

2026/11/14: I changed the design a little bit, because I found out, that the original was a little to slim and with the blue filament was not lighttight enough to block direct sunlight from the 6bit Sensor. The new model now works in all…

Pobrania
2
Polubienia
0
Ocena
0
P
Printablesblechbude

Leica Adapter M - M39 Montagewerkzeug: Leica Adapter M - M39 mounting tool

Einfaches Werkzeug um den Adapter Leica M Bajonett auf M39 Leica thread mount an der Kamera zu montieren oder zu demontieren. Getestet an drei verschiedenen Adapterringen, an einem war der Sitz genauer an einem anderen etwas wackeliger.…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesAvionicate

Fujifilm GFX to M39 Adapter (G-Mount to Leica/Zorki M39 Thread Mount)

Fujifilm GFX to M39 Adapter (G-Mount to Leica/Zorki M39 Thread Mount) Allows to adapt the old collapsable M39 Thread Mount lenses to the medium format GFX series of cameras. Model versions: V1 is the one you see on my camera. V2…

Pobrania
1
Polubienia
0
Ocena
0

Soviet threaded mount (M39 and M42) lens to Nikon F mount adapter

There are four variations of the same thing. M39 adapter for the Industar-50 lens and other lenses with a wide flange. Tested with my own Industar-50 lens and a Nikon D3100; infinity focus was lost. M39 adapter for Helios-44 and other…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

Trichter für 5 Liter Kanister zum aufschrauben; Funnel for 5-liter canisters, screw-on type; M39,5 x 4

Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…

P
Printables

M39/L39 - FX Adapter. Leica Thread Mount to Fuji X

I recently got a Canon LTM 50 1.8 for my Canon P and remembered that I had made the MUP to LTM mount. So I stayed up late making some L39/M39/LTM - whatever you want to call this mount - stuff. First is a L39 to Fuji Adapter - this post -…

P
Printables

AIRSOFT- Halo M392 gbbr kit for AAP01

Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…

P
PrintablesSpecops

AIRSOFT- Halo M392 gbbr kit for AAP01

Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…

Polubienia
15
Ocena
0