74 modeli
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the IKEA Markus office chair. Unfortunately, because of the not adjustable armrests and my sitting style, I never mount the armrests and that leads to a very annoying situation: the armrests mounting points remain uncovered and the…
Update: Fusion360 File added in case u have to customize it :D BUT Dont Blame me for my poor CAD Skills and the Messy File. ENG: This model is inspired by " TheBuildbay ", which I recreated in CAD and adapted so that armrest pads fit on…
IKEA Markus is a great office chair with decent part quality and very long warranty for an attractive price. However, there is one design flaw – the original armrests cannot be adjusted in any way and will most likely hit your desk. If…
A simple way to stop a Ikea Markus chair from moving.
Screw-in Covers for IKEA Markus chair as replacements for the original armrests. Tired of your Markus chair not fitting under your desk? I present to you this simple yet elegant solution. Printed in Prusament PLA Galaxy Black. Does not…
Make the part as strong as possible, use ABS (or PETG), print with 4 Perimeters, 4 top/bottom and >40% infill. If it fails, then under load and the load is, in the worst case, you, leaning on the armrest while sitting down on the chair.
The armrests of my Ikea Markus office got damaged and I needed some caps to hide bolt holes. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: 160 Infill: 20 Filament: unknown PLA black Notes: Bottom Pattern Initial…
If you love this chair, but don't like armrests this is the perfect hack for you. This cover hides the open screws for the armrests. No gluing or screwing necessary, the cover is simply pushed onto the two screw holes (A hammer can be…
After removing the original armrest there stays the ugly nuts. So I decided to design my own. A few minutes later was the first version done: printing testing, screwed it down fixing, resize the screws holes and make it suport les…
I started running sim racing games and I needed a brake for the wheels because I kept rolling away when pressing the brake. After studying the current alternatives, most of which require lifting the wheel, I decided to design my version,…
I'll print it in clear PETG with 99% infill. Adjusted the heights to fit my RH Logic 4 chair which is a bit high with the original. Here are 3 different heights with a 1 cm spacer as well.
I really like @Markus_p's various card boxes based off @whity's Rugged box. It works great for UNO and other cards which are the narrow style. It didn't however work for Bicycle Playing cards and I really wanted to use it for these. Remix…
These are smaller arms for the Markus chair to enable it to fit easily under a desk, the final height is 160mm from the bolt centreline. The design is loosely based on Hichi's but reduced to fit on a standard printer with a 250 mm x 200…
I have not printed this, but I only made very small modifications to the last model.
This bracket lowers the IKEA Markus chair armrests while keeping the original armrests. I made 3 versions with different height profiles. The small version lowers the armest by ~5cm (this is enough for most cases). The medium by about…
This is an adjustable armrest for the Ikea Markus office-chair. It's made of 2 parts, both of which have 5mm holes spaced 10mm apart in the connecting section, so you can screw it together with M5 Bolts (40mm length). There is 1mm…
I created a hook that can clamp on a Ikea Markus office chair. You will need this kind of modd of you don't have you're VR camera's your desk. Therefore moving the desk now with the chair! ;-) This is till a work in progress and things…
Simple armrest cover for IKEA Markus. Holds without screwing something in (if it doesn't scale it a little bit down).
Redesigned with a chamfer rather than fillet, to improve the printed part quality and remove the need for (most) support when printing. For a different printer, use the STL file. For a PRUSA printer, use the 3mf file. If you want to remix…
The nylon bearing on a IKEA Markus chair can break, causing a clunking sound when leaning back and forward. On the bottom of the hydrolic piston is a clip you can remove. Then you can slide the swivel base off to acces the bearing. Print…
I took the armrests off my Ikea Markus office chair and wanted some caps to place over the exposed bolt holes, these solve that problem. Print with 100% infill to avoid snapping with the torque needed to thread them. I printed these in…
An extension mod for Ikea Markus office chair will increase the width of your chair for a more comfortable sitting. You will need longer screws. I used M8x100 for this specific model, but any length will do, you can quickly increase the…
This is a custom part for the Ikea Markus office chair. It allows to lower the armrest in order to fit the chair better under the table.
A great spot to store headphones on your Ikea Markus Chair. In my case -HyperX Cloud II Headphones. SOME ASSEMBLY REQUIRED (see below) Print instructions Suggested 20% infill. 3 Perimeters, 3 Bottom/Top layers. 0.3mm layers to save time.…
Lower the chair. Use the chair on wooden floors without destroying them.
This a remix in done in PrusaSlicer: added a thing hole cover to allow it to be printed standing up. NEEDS Post-processing to punsh through, but prints slightly faster this way. added negative volume to allow the bolts deeper in
I modeled this simple spacer for the IKEA Markus seat. It adds approx. 5 cm more width on each side. You need longer screws (M8x80): https://www.amazon.de/gp/product/B078XML5DY Hope this one is helpful to some of you.
The original armrests didn't fit my office table so I shortened them. Printed in PETG, 6 perimeters, honeycomb 15% infill. 0 top/bottom layers.
Remix of the original model, seeing that it did not close completely over the hole, and the thread was too long. The changes are: 2 mm elongated outer area for better sealing 4 mm less thread
Wedge that can be installed in the Markus base, gives another 5° of tilt. Can be installed using the default supplied ikea screws. Print instructions Category: Office
A replacement armrest for the IKEA MARKUS office chair , designed as a functional and sturdy alternative to the original armrest. The design uses the existing mounting points of the chair and features a reinforced structure with a large…
Happy 3D printing!
Printable piece to lock IKEA's MARKUS chair at a height of 90mm with 5mm shims to adjust to the chairs maximum height of 115mm. Shim shown in grey in photo. Useful if the chairs hydraulics are beginning to fail and the chair drops by…
This is a remix of the bottom part of @Markus710 headphone stand, just added a tray.
A small and lightweight 3D printed IKEA Markus chair wheel stopper, to stop the chair from moving around.
Side mount for Ikea Office chair replacing the side rests. The arm rests was annoying as the prevented the table from getting down to right height.
Like seemingly everyone else who ever bought an IKEA Markus chair, I found the armrests too tall to fit under my desk. Since I felt like I also didn't need armrests(corner desk), I decided to go with simple handles instead. And since I am…
Replacement Feet for the Ikea Markus chair, recycling the metal rods from the Casters. Two variants are included, one requiring a grommet to provide friction mounting on the metal Stem, another without, which would instead require…
I'm using my Markus chair without arm rests, and found the mounting for the arm rests annoying. The bumper help protect the chair and people using them :)
My ikea markus armrest disintegrated after 6 years of use. Everything else works perfectly fine so I don't feel like buying a new one just for this. They don't sell replacements so I decided to design and print it myself *It is a two part…
You will need 4 M8x80 socket screws. You gain about 4cm per side.
The original armrests on the Markus were not particularly comfortable for me and simply omitting them left me with ugly bolt holes and a hard-to-carry chair. These handles fixed both problems. You can use the original bolts or, if you…
After several attempts to replace the legs of my chair with felt glides to avoid damaging the parquet, I came up with this solid model. The aim was to keep the wheels to let them handle the weight transfer constraints with the chair, but…
Needs the provided bolts and 4 m4 ~1/2cm bolts. Freecad project left for tweaking.
Got a office chair with wheel you want to break and make the chair stand still? This was printed with IKEAs Markus chair as template but I would guess that the same type of wheels are used on other variants as well. Please leave a comment…
Ikea Markus Pixel 6 Pro with case (preferably the official one) holder It's a bit wider than the original pixel 6 pro, but it is made for a easier use with cases. The rounded sides allow the edge of the case to prevent the screen from…
Some Ikea Markus batches seem to have the backrest mounting plate at a slight angle - this results in a slightly laid back position of the backrest even in the most upright setting. This wedge adds 4° of inclination to the backrest,…
I'm just getting into making my own designs, so I just had the random thought of hanging various accessories from the arm of my chair ( for example my driving sim shift stick ) The actual STL is a new version from the one in the little…
A cute agent duck character inspired by modern computer games and tactical action games. A stylized collectible duck with a distinctive agent/operative personality, combining gaming aesthetics, tactical gear and playful rubber-duck…
After removing the armrests on the chair, I wanted to protect the threads from dirt. Bolts from holding the armrests where to long to keep in place. So remixed the NUT JOB by Mattala. Excellent work mattala/Mike! Outer diameter 8mm M8…
Replacement TPU cushion for Ikea Markus chair. Allows you to reuse the screw and mount it flat to the chair frame. ⚠ You will need 2 M6 inserts per armrest to screw it to the chair frame. Change the infill method to have different cushion…
Reinforced and redesigned Ikea Markus armrest lowering bracket
This is a custom part for the Ikea Markus office chair. It allows to lower the armrest in order to fit the chair better under the table.
Vapor Storm Eco mod holder for Ikea Markus chair If you need a support for a different model of e-cig send me the measurements and I will try to satisfy you Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Doesn't Matter…
I printed it with these settings and the result was great, but feel free to try others. I suggest printing it on its side to maximize the strength of the anchor point to the chair. layer height 0,2 Infill 20% PETG
Replacement armrest for the IKEA MARKUS office chair. Available as left and right versions. Designed for 3D printing.
Modified version of Johannes Hansson's IKEA Markus Rolling Stop with M5 bolt hole added enabling bolting to floor.
This mod converts the IKEA MARKUS armrest into a quick-release foldable armrest, making the chair much more comfortable for playing guitar or other instruments while keeping the armrests for normal desk use. The design uses: The original…
Headphone Stand - "Markus" / Kopfhörerständer - "Markus" Wonderful headphone stand personalized with Markus. It is self created and possible to colorize like you wish. Dimensions: 80mm x 80mm x 215mm Printsettings: 0,2mm layer heighth 15%…
Custom part for ikea markus office chair. It allows you to lower the armrest a bit to make it more ergonomic for the shoulders. The original model was a bit too low for my liking.
Исходная версия детали печаталась «поперёк» — линии слоёв шли через наиболее нагруженное место. У меня такой вариант проработал около 4 месяцев и затем сломался по слою. В этой версии я сделал деталь составной . Благодаря этому при печати…
Ring for a finger for 10-13 years
the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to reach out…
Play guitar? Want to rid your Markus chair of its armrests? Don't want the newly exposed fabric to fray? Well I play bass and had the same problem so I made this thingy. In order for this to work, you'll need to get a shorter bolt to…
Adjustable Ikea Markus armrest extenders. Bill of materials for 5 cm of adjustable range per armrest: Buy: 4 x M8 bolts. I used these . Print: 20 x spacer 4 x chair cap 8 x arm insert 4 x bolt cap If you have shorter bolts, print less…
Side mount for Ikea Office chair replacing the side rests. The arm rests was annoying as the prevented the table from getting down to right height.
Modified version of Johannes Hansson's IKEA Markus Rolling Stop with M5 bolt hole added enabling bolting to floor.
Исходная версия детали печаталась «поперёк» — линии слоёв шли через наиболее нагруженное место. У меня такой вариант проработал около 4 месяцев и затем сломался по слою. В этой версии я сделал деталь составной . Благодаря этому при печати…
My ikea markus armrest disintegrated after 6 years of use. Everything else works perfectly fine so I don't feel like buying a new one just for this. They don't sell replacements so I decided to design and print it myself *It is a two part…
I really like @Markus_p's various card boxes based off @whity's Rugged box. It works great for UNO and other cards which are the narrow style. It didn't however work for Bicycle Playing cards and I really wanted to use it for these. Remix…
I'm using my Markus chair without arm rests, and found the mounting for the arm rests annoying. The bumper help protect the chair and people using them :)
Ersatz für defekte Armlehne des Markus Bürostuhls. Ich habe TPU verwendet.
