2325 modeli
Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…
Wydruk około 6,48 €–7,92 € nettoWstępna wycena jednego wariantu
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…
Wydruk około 7,27 €–8,88 € nettoWstępna wycena jednego wariantu
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena jednego wariantu
Monkey Skull Chalice. HOW TO VID.
Wydruk około 14,90 €–18,22 € nettoWstępna wycena jednego wariantu
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple tablet and/or sheet music holder I designed for my Alesis Nitro Mesh E-Drum rack. Since it is a customizable OpenSCAD design it's possible to create variants fitting other racks, as long as the is a horizontal pipe at the right…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits snuggly over one of the vertical leg posts of the Alesis Nitro Mesh drumkit. Can hold light books or sheet music up to 15 mm thick. Diamond cut-out saves a bit of print time and material, but I've also included a solid version of the…
Wydruk około 13,73 €–16,78 € nettoWstępna wycena jednego wariantu
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
Wydruk około 6,41 €–7,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Death Star Egg Cup - Testing out Meshy web site for generating 3d models for use with Blender displacement. Evaluation: LumaAI is better. Meshy offers more refinement and prompt options than LumaAI. But its going to cost you after your…
Wydruk około 4,06 €–4,97 € nettoWstępna wycena jednego wariantu
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
designed in fusion 360, this 287 segment model was intended for amusement purpose though it doesn't have to be. warning this a some what obnoxious to print so probably use glue print speed: first layer 10mm/s or slower, other layers…
Wydruk około 9,98 €–12,20 € nettoWstępna wycena jednego wariantu
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Hexagonal pattern design.
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
Loved the original model, but wanted a tighter mesh on the cheese grater, so I made one! I printed it face down on the print sheet, but you could print it like how MroznyHipis suggests in his original model as well.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Housing for mounting solar powered radio on pole. Print with PETG for that weather-resistant housing. Spray the inside of the enclosure and the insert with PRF 202 to make it waterproof. The prints are optimized to not require print…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Mount that Meshtastic repeater on a tree with this enclosure. The insert goes into the housing from below leaving all entries weather proofed inside the protruding shroud of the outer housing. Print with PETG and spray inside of the…
Wydruk około 4,03 €–4,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another convenient way to store and access your Revo nozzles using the E3D Revo Connect modular system. I remixed the great original sidebox first created by KalleKnall and then remixed by dotson90 with Mesh sides and added a front mount…
Wydruk około 4,64 €–5,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an AI made model of a cookie cutter shaped as a balloon.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
This is my version of Gcode (Slic3r) for those of you who want a ooze free mesh bed leveling. Also, for those of you who suffer from live z-adjustment of different materials. Process of the Gcode NOTE: Please clean and clear the bed…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Framework 16 with dGPU ONLY - It works great. I have been using this printed and so far - it's great!!! I recommend printing in PETG with at least four perimeters and 0.2mm layer height. It does need some supports. The holes should each…
Wydruk około 15,31 €–18,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Box for meshtastic repeater. Solar panel 500mm ou 2inch pole large zip tie sleeve water tight (rain) 20cm antenna at the bottom Batteries used: 4X18650 on a parallel connection holder Solar panel used: 145X145mm About 500mA GCODE files…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Feets for 3030 Mesh Cuboid enclosure from RatRig I have bought this Mesh 3030 Enclosure Cuboid from RatRig : https://www.ratrig.com/modularenclosuresystem/enclosure-standard.html But it comes without feet… 3030 extruded aluminium can easy…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
A basic desktop holder for the Unifi U6 Mesh
Wydruk około 4,03 €–4,92 € nettoWstępna wycena jednego wariantu
Additional cooling for the Meshlicious ITX computer case. Fits a 90mm x 14mm fan and attaches to the center spine of the case.
Wydruk około 0,72 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is made in Fusion 360. I made it myself for a fence, because buying such elements is expensive. The diameter of the fence wire is 2mm. I printed this element with an Anycubis Cobra 2 pro with PETG filament.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
When I added a hexagonal mesh to the Voron's skirts, I also wanted that look and the added protection for the fan grills. So I designed this model to fit my needs: Provide a sturdy mesh that won't break accidentally Modular to play around…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
I wanted the nice mesh-style look for the skirts of my Voron 🥰 but without reprinting the complete skirts and especially without “meshing” with the slicer 😉. So I designed these plug-in mesh inserts which besides the awesome look also…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…
Not sure how I wanted the skirts for my 🥰 BoxTurtle , whether to go the true mesh way or rather opt for a mesh-like look only but have them printed solid 🤔, I played around in CAD to have the mesh as a separate part and also to do some…
The 🥰 BoxTurtle Enclosure comes with a redesigned front and different skirt parts which require some changes to the TurtleFence . So here they are: Modified front skirts, spacers and the clip-in mesh inserts to fit the enclosure … and of…
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
Repaired mesh iteratively in meshlab so prusa slicer could print it. Will update with photo of print once it is done. Category: Scans & Replicas Note : should print fine in Prusa Slicer after error correction. May not print in certain…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Fun fidget toy: Mesh or fabric material, like chain mail. If you enjoyed this, check this out! https://www.printables.com/model/1784764-silent-gear-cube
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
UPDATE: The main spacers were missing from the file list and have now been added. The hole in the hand crank has been adjusted to fit the input shaft. This is my rendition of a “constant mesh” 4 speed manual transmission gearbox. A…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Mesh Bowl Elevate your space with this sleek, 3D-printable Mesh Bowl — a modern, minimalist container ideal for decor, storage, or gifting. Featuring a dynamic mesh pattern and clean geometric curves, this design strikes the perfect…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Honeycomb/Hex mesh pattern made by me in TinkerCad. This pattern can easily be copied to add more together for a larger size if needed. Supports = No Brim = No Filament = I used PLA but anything would work
Dimensions Standart Dimension: 95 mm x 101 mm (D x H) Scalable to whatever size you need.
Just changed the appearance using mesh modifiers in PrusaSlicer. Print instructions Printed using Prusament PETG. Could be printed without MMU. Requires 2 filament changes if you want the multi color.
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
I needed a mesh insert for my bonsai dish and I didn't want to buy a large pack of them online. This model can be printed, then trimmed to size if necessary. The holes are 3 mm wide, and should be suitable for gritty soil. I designed this…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
I have had this idea for a ‘fried egg’ fidget fabric/drink coaster for a little while. I loved the idea of using mesh fabric in the fried egg to give it flexibility and make it feel more ‘egg-like’. The egg shell with the magnets is a fun…
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
I haven't tested this yet because of printer problems but it 186.5mm long 121mm wide 1mm tall and the whole are 2x2mm. Please if anyone prints this tell me how it turned out cause I'm really curious.
The Lattice Lamp Shade features an intricate, organic pattern that casts beautiful shadows and adds warmth to any interior. Designed for E27 fittings, it pairs effortlessly with modern or minimalist spaces — turning light into…
Mesh for my Spidy shells Enjoy Category: 3D Printing
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
A 3D Printed Fan Cover / Mesh Filter. Prints out single straight lines criss crossing. See close up pictures. It is memorising to watch it being printed! Do a colour change on the first and second layers in your slicer to add a shimmering…
This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism. CAD on…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
No supports needed. I recommend 0.15 layer hight and 3 shells. Fusion 360 file included! Check out a video about this case by Matt Reviews It . Order a printed case from AltaVox and support Meshtastic through Open Collective
A set of stackable mesh sieves for separating granules by size. Sizes included are from 1.5 mm to 0.250 mm. OpenSCAD file is included so you can make custom sizes. All parameters are at the top of the file to make it easy. Print at 0.2 mm…
This design is now open for remixes, please give attribution and link your remixes to this page! I'm happy to link back to remixes or add them on this page to keep everything in one place. Update 31 December 2024: Added a shell option for…
Remeshed the model and properly corrected and shaped the neck to look properly part of the rest of the squid update: Added lower poly/smaller file sized versions for people with not so good computers/internet. They are all the same…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
muzi.works' [H1 - Case for Heltec V3 running Meshtastic] is a great design, but my battery couldn't fit in it, so I remixed its case. If you are like me and have trouble with the battery being too big, you can consider it. This case is…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…
I make it for my Fractal Design Define Nano S PC case Print from PETG/ABS/ASA/HT-PLA Walls: 4-5 Infill min 30% UPDATE!! NOW NEW Honeycube Mesh Variant!!
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 Pro version is a fully integrated,…
Experiment with 3D printed mesh sheet. Requirement: Print at 0.2mm layer height Optional: Do filament swap/color change on second layer in your slicer to get funky colors.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…
The People’s Repeater: A low-cost solar mesh repeater design for Meshtastic or Meshcore. The People’s Repeater is an affordable LoRa mesh repeater using harvested parts from a $10 Lowes Harbor Breeze garden light. The design relies on the…
***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…
🐉 Dragon Scale Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a Dragon Scale–style flexible mesh , entirely modeled from zero in Fusion 360…
These customizable mesh inserts do great job of hiding that rat's nest of wires in the back of your Voron V0. The multi-part STL can be split in the slicer, and custom infill settings applied to the inner body to create a mesh of your…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is an enclosure to keep a RAK Wireless RAK19003 base and its RAK4630 LoRa module on the back of a Magsafe compatible phone for use with Meshtastic. It adds about 16mm to the total thickness of the phone. It can also be stuck to flat…
Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.
After one season of successfully using my printed hydroponic tower, I disassembled it to clean and overwinter the parts. By that I realized, that the construction around the filtration mesh holder won't be usable another season as it has…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is a complete skirt mod for Voron 2.4. The version for Voron Tridents can be found here: https://www.printables.com/model/644512-flat-mesh-skirt-voron-trident-alpha-version Configurations Sizes 250 mm 300 mm 350 mm Power Inlets…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. Two sliding dog clutches are provided on the main shaft. Gear ratios: 1.38, 1.00, 0.78, reverse 1.86 and…
***Redesign 03/01/2026*** Button base was rounded to avoid warping of corners. Fillet was added to the cover's side posts to re-enforce weak spots. Middle frame was redesigned to apply even pressure despite battery size which was…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
This skull shaped pencil-holder will decorate your desk and showcase your printers performance at the same time. Printing Recommendations: 0.2 mm layer hight or less, no supports needed, 100 % infill, 2 perimeters. Remark: Loading in…
🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
Case with battery
Elevate your indoor garden with these stunning Voronoi geometric planters. The intricate, organic mesh design creates a beautiful play of light and shadow, making your succulents and small plants look like pieces of modern art. Watertight…
This new version has much smoother surfaces when 3D printing since it uses Quad Meshes. I've also tweaked each letter shape while converting them so that they don't have any strange divots or creases.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
It is for 1st leyer bed leveling testing, calibration test of any printer
Lowe's Solar Flood Light Mesh Node Bracket System Lowe's Harbor Breeze Solar Light (Item #1234868 | Model #ZDL1362): https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381 This is a custom…
The TextMesh Device, built around the Heltec LoRa V3, offers essential functionality in a portable, stand-alone design. Equipped with GPS, a buzzer, a 3000mAH battery, a keyboard, and a power switch, it's designed to be straightforward…
